Python dispatcher.connect方法代碼示例

# 需要導入模塊: from pydispatch import dispatcher [as 別名]
# 或者: from pydispatch.dispatcher import connect [as 別名]
def precmd(self, line):
		cmd, args, remain = self.parseline(line)
		if not cmd:
			return line
		if cmd in self.client_connected_commands:
			if not self.client.isConnected():
				print ""
				print "Command '{0}' could only be called with a client connected.".format(cmd)
				print "--------------------------------------------------------------"
				print ""
				print "Use 'SetKeyboardLanguage' to switch to your targtes keyboard"
				print "layout and run 'FireStage1' to connect via HID covert channel."
				print "--------------------------------------------------------------"
				print ""
				return ""		
		return line 

# 需要導入模塊: from pydispatch import dispatcher [as 別名]
# 或者: from pydispatch.dispatcher import connect [as 別名]
def connect(self, receiver, signal, **kwargs):
        """
        Connect a receiver function to a signal.

        The signal can be any object, although Scrapy comes with some
        predefined signals that are documented in the :ref:`topics-signals`
        section.

        :param receiver: the function to be connected
        :type receiver: callable

        :param signal: the signal to connect to
        :type signal: object
        """
        kwargs.setdefault('sender', self.sender)
        return dispatcher.connect(receiver, signal, **kwargs) 

# 需要導入模塊: from pydispatch import dispatcher [as 別名]
# 或者: from pydispatch.dispatcher import connect [as 別名]
def connect_error_dispatcher():
    clazz = 'aggregator'
    method = 'connect_error_dispatcher'
    # Load dispatchers for communicating error messages to slack (or somewhere else)

    # noinspection PyPep8Naming
    SIGNAL = 'publish-error-signal'
    if 'slack' in BuildConfig.json_config:
        commons.print_msg(clazz, method, 'Detected slack in buildConfig. Connecting error dispatcher to slack.')
        dispatcher.connect(Slack.publish_error, signal=SIGNAL, sender=dispatcher.Any)
    elif BuildConfig.settings.has_section('slack'):
        commons.print_msg(clazz, method, 'Detected slack in global settings.ini.  Connecting error dispatcher to slack.')
        dispatcher.connect(Slack.publish_error, signal=SIGNAL, sender=dispatcher.Any)
    else:
        commons.print_msg(clazz, method, 'No event dispatcher detected. The only place errors will show up is in this '
                                         'log.', 'WARN') 

# 需要導入模塊: from pydispatch import dispatcher [as 別名]
# 或者: from pydispatch.dispatcher import connect [as 別名]
def __init__(self, devfile_in, devfile_out, on_connect_callback=None):
		self.state={}
		self.state["connectCallback"] = on_connect_callback # unused at the moment, callback mustn't be processed in LinkLayer threads
		self.fin = devfile_in
		self.fout = devfile_out

		self.__resetState()
		# receive mesage from transport layer
		dispatcher.connect(self.__handle_transport_layer, sender=LinkLayer.TRANSPORTLAYER_SENDER_NAME) 

# 需要導入模塊: from pydispatch import dispatcher [as 別名]
# 或者: from pydispatch.dispatcher import connect [as 別名]
def __init__(self):
                # create queue for incoming streams to decouple processing from link layer reader thread
                self.stream_in_queue = Queue.Queue()

                # register Listener for LinkLayer signals
                dispatcher.connect(self.handle_link_layer, sender="LinkLayer") 

# 需要導入模塊: from pydispatch import dispatcher [as 別名]
# 或者: from pydispatch.dispatcher import connect [as 別名]
def onClientConnectStateChange(self, state):
		#print "Client connect state: {0}".format(state)
		if state:
			print "\nTarget connected through HID covert channel\n"
		else:
			print "\nTarget disconnected"
		self.setPrompt(state) 

# 需要導入模塊: from pydispatch import dispatcher [as 別名]
# 或者: from pydispatch.dispatcher import connect [as 別名]
def disconnect(self, receiver, signal, **kwargs):
        """
        Disconnect a receiver function from a signal. This has the
        opposite effect of the :meth:`connect` method, and the arguments
        are the same.
        """
        kwargs.setdefault('sender', self.sender)
        return dispatcher.disconnect(receiver, signal, **kwargs) 

# 需要導入模塊: from pydispatch import dispatcher [as 別名]
# 或者: from pydispatch.dispatcher import connect [as 別名]
def send_catch_log(self, signal, **kwargs):
        """
        Send a signal, catch exceptions and log them.

        The keyword arguments are passed to the signal handlers (connected
        through the :meth:`connect` method).
        """
        kwargs.setdefault('sender', self.sender)
        return _signal.send_catch_log(signal, **kwargs) 

# 需要導入模塊: from pydispatch import dispatcher [as 別名]
# 或者: from pydispatch.dispatcher import connect [as 別名]
def send_catch_log_deferred(self, signal, **kwargs):
        """
        Like :meth:`send_catch_log` but supports returning `deferreds`_ from
        signal handlers.

        Returns a Deferred that gets fired once all signal handlers
        deferreds were fired. Send a signal, catch exceptions and log them.

        The keyword arguments are passed to the signal handlers (connected
        through the :meth:`connect` method).

        .. _deferreds: https://twistedmatrix.com/documents/current/core/howto/defer.html
        """
        kwargs.setdefault('sender', self.sender)
        return _signal.send_catch_log_deferred(signal, **kwargs) 

# 需要導入模塊: from pydispatch import dispatcher [as 別名]
# 或者: from pydispatch.dispatcher import connect [as 別名]
def __init__(self, zigate, mqtt_host='localhost:1883',
                 username=None, password=None):
        self._mqtt_host = mqtt_host
        self.zigate = zigate
        self.client = mqtt.Client()
        if username is not None:
            self.client.username_pw_set(username, password)
        dispatcher.connect(self.attribute_changed, ZIGATE_ATTRIBUTE_ADDED)
        dispatcher.connect(self.attribute_changed, ZIGATE_ATTRIBUTE_UPDATED)
        dispatcher.connect(self.device_changed, ZIGATE_DEVICE_ADDED)
        dispatcher.connect(self.device_changed, ZIGATE_DEVICE_UPDATED)
        dispatcher.connect(self.device_removed, ZIGATE_DEVICE_REMOVED)
        self.client.on_connect = self.on_connect
        self.client.on_message = self.on_message 

# 需要導入模塊: from pydispatch import dispatcher [as 別名]
# 或者: from pydispatch.dispatcher import connect [as 別名]
def connect(self):
        host = self._mqtt_host
        port = 1883
        if ':' in host:
            host, port = host.split(':')
        port = int(port)
        self.client.connect(host, port) 

# 需要導入模塊: from pydispatch import dispatcher [as 別名]
# 或者: from pydispatch.dispatcher import connect [as 別名]
def start(self):
        self.connect()
        self.zigate.autoStart()
        self.zigate.start_auto_save()
        self.client.loop_forever() 

# 需要導入模塊: from pydispatch import dispatcher [as 別名]
# 或者: from pydispatch.dispatcher import connect [as 別名]
def database_connect(self):
        try:
            # set the database connectiont to autocommit w/ isolation level
            self.conn = sqlite3.connect('./data/empyre.db', check_same_thread=False)
            self.conn.text_factory = str
            self.conn.isolation_level = None
            return self.conn

        except Exception:
            print helpers.color("[!] Could not connect to database")
            print helpers.color("[!] Please run database_setup.py")
            sys.exit()

    # def preloop(self):
    #     traceback.print_stack() 

# 需要導入模塊: from pydispatch import dispatcher [as 別名]
# 或者: from pydispatch.dispatcher import connect [as 別名]
def __init__(self, mainMenu, sessionID):

        cmd.Cmd.__init__(self)

        self.mainMenu = mainMenu

        self.sessionID = sessionID

        self.doc_header = 'Agent Commands'

        # try to resolve the sessionID to a name
        name = self.mainMenu.agents.get_agent_name(sessionID)

        # set the text prompt
        self.prompt = '(EmPyre: '+helpers.color(name, 'red')+') > '

        # listen for messages from this specific agent
        dispatcher.connect(self.handle_agent_event, sender=dispatcher.Any)

        # display any results from the database that were stored
        # while we weren't interacting with the agent
        results = self.mainMenu.agents.get_agent_results(self.sessionID)
        if results:
            print "\n" + results.rstrip('\r\n')

    # def preloop(self):
    #     traceback.print_stack() 

# 需要導入模塊: from pydispatch import dispatcher [as 別名]
# 或者: from pydispatch.dispatcher import connect [as 別名]
def listen(receiver, soClass, signal, alsoSubclasses=True, weak=True):
    """
    Listen for the given ``signal`` on the SQLObject subclass
    ``soClass``, calling ``receiver()`` when ``send(soClass, signal,
    ...)`` is called.

    If ``alsoSubclasses`` is true, receiver will also be called when
    an event is fired on any subclass.
    """
    dispatcher.connect(receiver, signal=signal, sender=soClass, weak=weak)
    weakReceiver = ref(receiver)
    subclassClones.setdefault(soClass, []).append((weakReceiver, signal))

# We export this function: