Python numpy.ptp方法代碼示例

# 需要導入模塊: import numpy [as 別名]
# 或者: from numpy import ptp [as 別名]
def spline_transform_multi(img, mask):
    bimask=mask>0
    M,N=np.where(bimask)
    w=np.ptp(N)+1
    h=np.ptp(M)+1
    kernel=cv2.getStructuringElement(cv2.MORPH_ELLIPSE,(3,3))
    bound=cv2.dilate(bimask.astype('uint8'),kernel)-bimask
    y,x=np.where(bound>0)

    if x.size>4:
        newxy=thin_plate_transform(x,y,w,h,mask.shape[:2],num_points=5)

        new_img=cv2.remap(img,newxy,None,cv2.INTER_LINEAR)
        new_msk=cv2.remap(mask,newxy,None,cv2.INTER_NEAREST)
    elif x.size>0:
        new_img=img
        new_msk=mask
    return new_img,new_msk 

# 需要導入模塊: import numpy [as 別名]
# 或者: from numpy import ptp [as 別名]
def __init__(self, parent=None, visible=True, drawmode=gl.GL_LINES, position=(0, 0, 0), **kwargs):
        """Calculates collision by checking if a point is inside a sphere around the mesh vertices."""
        # kwargs['scale'] = np.ptp(parent.vertices, axis=0).max() / 2 if 'scale' not in kwargs else kwargs['scale']
        # kwargs['']

        from .wavefront import WavefrontReader
        from .resources import obj_primitives
        reader = WavefrontReader(obj_primitives)
        body = reader.bodies[self.primitive_shape]
        vertices, normals, texcoords = body['v'], body['vn'], body['vt']

        super(ColliderBase, self).__init__(arrays=[vertices, normals, texcoords],
                                           drawmode=drawmode, visible=visible, position=position,
                                           **kwargs)
        self.uniforms['diffuse'] = 1., 0, 0

        # Changes Scenegraph.parent execution order so self.scale can occur in the CollisionChecker parent property.
        if parent:
            self.parent = parent 

# 需要導入模塊: import numpy [as 別名]
# 或者: from numpy import ptp [as 別名]
def _hist_bin_sqrt(x, range):
    """
    Square root histogram bin estimator.

    Bin width is inversely proportional to the data size. Used by many
    programs for its simplicity.

    Parameters
    ----------
    x : array_like
        Input data that is to be histogrammed, trimmed to range. May not
        be empty.

    Returns
    -------
    h : An estimate of the optimal bin width for the given data.
    """
    del range  # unused
    return x.ptp() / np.sqrt(x.size) 

# 需要導入模塊: import numpy [as 別名]
# 或者: from numpy import ptp [as 別名]
def _hist_bin_sturges(x, range):
    """
    Sturges histogram bin estimator.

    A very simplistic estimator based on the assumption of normality of
    the data. This estimator has poor performance for non-normal data,
    which becomes especially obvious for large data sets. The estimate
    depends only on size of the data.

    Parameters
    ----------
    x : array_like
        Input data that is to be histogrammed, trimmed to range. May not
        be empty.

    Returns
    -------
    h : An estimate of the optimal bin width for the given data.
    """
    del range  # unused
    return x.ptp() / (np.log2(x.size) + 1.0) 

# 需要導入模塊: import numpy [as 別名]
# 或者: from numpy import ptp [as 別名]
def _hist_bin_rice(x, range):
    """
    Rice histogram bin estimator.

    Another simple estimator with no normality assumption. It has better
    performance for large data than Sturges, but tends to overestimate
    the number of bins. The number of bins is proportional to the cube
    root of data size (asymptotically optimal). The estimate depends
    only on size of the data.

    Parameters
    ----------
    x : array_like
        Input data that is to be histogrammed, trimmed to range. May not
        be empty.

    Returns
    -------
    h : An estimate of the optimal bin width for the given data.
    """
    del range  # unused
    return x.ptp() / (2.0 * x.size ** (1.0 / 3)) 

# 需要導入模塊: import numpy [as 別名]
# 或者: from numpy import ptp [as 別名]
def testPtpExecution(self):
        x = arange(4, chunk_size=1).reshape(2, 2)

        t = ptp(x, axis=0)

        res = self.executor.execute_tensor(t, concat=True)[0]
        expected = np.ptp(np.arange(4).reshape(2, 2), axis=0)
        np.testing.assert_equal(res, expected)

        t = ptp(x, axis=1)

        res = self.executor.execute_tensor(t, concat=True)[0]
        expected = np.ptp(np.arange(4).reshape(2, 2), axis=1)
        np.testing.assert_equal(res, expected)

        t = ptp(x)

        res = self.executor.execute_tensor(t)[0]
        expected = np.ptp(np.arange(4).reshape(2, 2))
        np.testing.assert_equal(res, expected) 

# 需要導入模塊: import numpy [as 別名]
# 或者: from numpy import ptp [as 別名]
def overlay_segmentation(vol, seg):
    # Scale volume to greyscale range
    vol_greyscale = (255*(vol - np.min(vol))/np.ptp(vol)).astype(int)
    # Convert volume to RGB
    vol_rgb = np.stack([vol_greyscale, vol_greyscale, vol_greyscale], axis=-1)
    # Initialize segmentation in RGB
    shp = seg.shape
    seg_rgb = np.zeros((shp[0], shp[1], shp[2], 3), dtype=np.int)
    # Set class to appropriate color
    seg_rgb[np.equal(seg, 1)] = [255, 0,   0]
    seg_rgb[np.equal(seg, 2)] = [0,   0, 255]
    # Get binary array for places where an ROI lives
    segbin = np.greater(seg, 0)
    repeated_segbin = np.stack((segbin, segbin, segbin), axis=-1)
    # Weighted sum where there's a value to overlay
    alpha = 0.3
    vol_overlayed = np.where(
        repeated_segbin,
        np.round(alpha*seg_rgb+(1-alpha)*vol_rgb).astype(np.uint8),
        np.round(vol_rgb).astype(np.uint8)
    )
    # Return final volume with segmentation overlay
    return vol_overlayed 

# 需要導入模塊: import numpy [as 別名]
# 或者: from numpy import ptp [as 別名]
def plot_checkpoint(self,e):
        filename = "/data/sample_"+str(e)+".png"

        noise = self.sample_latent_space(16)
        images = self.generator.Generator.predict(noise)
        
        plt.figure(figsize=(10,10))
        for i in range(images.shape[0]):
            plt.subplot(4, 4, i+1)
            if self.C==1:
                image = images[i, :, :]
                image = np.reshape(image, [self.H,self.W])
                image = (255*(image - np.min(image))/np.ptp(image)).astype(int)
                plt.imshow(image,cmap='gray')
            elif self.C==3:
                image = images[i, :, :, :]
                image = np.reshape(image, [self.H,self.W,self.C])
                image = (255*(image - np.min(image))/np.ptp(image)).astype(int)
                plt.imshow(image)
            
            plt.axis('off')
        plt.tight_layout()
        plt.savefig(filename)
        plt.close('all')
        return 

# 需要導入模塊: import numpy [as 別名]
# 或者: from numpy import ptp [as 別名]
def scale_factors(self):
        """
        Factors to rescale the triangulation into a unit square.

        Returns *k*, tuple of 2 scale factors.

        Returns
        -------
        k : tuple of 2 floats (kx, ky)
            Tuple of floats that would rescale the triangulation :
            ``[triangulation.x * kx, triangulation.y * ky]``
            fits exactly inside a unit square.

        """
        compressed_triangles = self._triangulation.get_masked_triangles()
        node_used = (np.bincount(np.ravel(compressed_triangles),
                                 minlength=self._triangulation.x.size) != 0)
        return (1 / np.ptp(self._triangulation.x[node_used]),
                1 / np.ptp(self._triangulation.y[node_used])) 

# 需要導入模塊: import numpy [as 別名]
# 或者: from numpy import ptp [as 別名]
def compute_ptp_amp(data):
    """Peak-to-peak (PTP) amplitude of the data (per channel).

    Parameters
    ----------
    data : ndarray, shape (n_channels, n_times)

    Returns
    -------
    output : ndarray, shape (n_channels,)

    Notes
    -----
    Alias of the feature function: **ptp_amp**
    """
    return np.ptp(data, axis=-1) 

# 需要導入模塊: import numpy [as 別名]
# 或者: from numpy import ptp [as 別名]
def fit(self, X, y=None):
        """Fit it.

        Parameters
        ----------
        X : array, shape (n_epochs, n_times)
            The data for one channel.
        y : None
            Redundant. Necessary to be compatible with sklearn
            API.
        """
        deltas = np.ptp(X, axis=1)
        self.deltas_ = deltas
        keep = deltas <= self.thresh
        # XXX: actually go over all the folds before setting the min
        # in skopt. Otherwise, may confuse skopt.
        if self.thresh < np.min(np.ptp(X, axis=1)):
            assert np.sum(keep) == 0
            keep = deltas <= np.min(np.ptp(X, axis=1))
        self.mean_ = _slicemean(X, keep, axis=0)
        return self 

# 需要導入模塊: import numpy [as 別名]
# 或者: from numpy import ptp [as 別名]
def _vote_bad_epochs(self, epochs, picks):
        """Each channel votes for an epoch as good or bad.

        Parameters
        ----------
        epochs : instance of mne.Epochs
            The epochs object for which bad epochs must be found.
        picks : array-like
            The indices of the channels to consider.
        """
        labels = np.zeros((len(epochs), len(epochs.ch_names)))
        labels.fill(np.nan)
        bad_sensor_counts = np.zeros((len(epochs),))

        this_ch_names = [epochs.ch_names[p] for p in picks]
        deltas = np.ptp(epochs.get_data()[:, picks], axis=-1).T
        threshes = [self.threshes_[ch_name] for ch_name in this_ch_names]
        for ch_idx, (delta, thresh) in enumerate(zip(deltas, threshes)):
            bad_epochs_idx = np.where(delta > thresh)[0]
            labels[:, picks[ch_idx]] = 0
            labels[bad_epochs_idx, picks[ch_idx]] = 1

        bad_sensor_counts = np.sum(labels == 1, axis=1)
        return labels, bad_sensor_counts 

# 需要導入模塊: import numpy [as 別名]
# 或者: from numpy import ptp [as 別名]
def load_image(filename):
    if filename in loaded_files:
        return loaded_files[filename]
    img = imageio.imread(filename, as_gray=True).astype(np.float)

    # Normalize the whole image
    # img *= 1.0/(img.max() - img.min())
    img = (img - np.min(img))/np.ptp(img)

    # Normalize on a sigmoid curve to better separate ink from paper
    k = 10
    img = np.sqrt(1 / (1 + np.exp(k * (img - 0.5))))

    loaded_files[filename] = img
    return img


# Pull out the image of a single character.
# Each character has multiple images, specify index (0-5) to choose one 

# 需要導入模塊: import numpy [as 別名]
# 或者: from numpy import ptp [as 別名]
def compute_group(cls, data, scales, **params):
        n = len(data)
        if n == 0:
            return pd.DataFrame()

        weight = data.get('weight')

        if params['trim']:
            range_y = data['y'].min(), data['y'].max()
        else:
            range_y = scales.y.dimension()

        dens = compute_density(data['y'], weight, range_y, **params)
        dens['y'] = dens['x']
        dens['x'] = np.mean([data['x'].min(), data['x'].max()])

        # Compute width if x has multiple values
        if len(np.unique(data['x'])) > 1:
            dens['width'] = np.ptp(data['x']) * 0.9

        return dens 

# 需要導入模塊: import numpy [as 別名]
# 或者: from numpy import ptp [as 別名]
def test_swarmspan():
    print('Testing swarmspans')

    base_mean = np.random.randint(10, 101)
    seed, ptp, df = create_dummy_dataset(base_mean=base_mean)

    print('\nSeed = {}; base mean = {}'.format(seed, base_mean))

    for c in df.columns[1:-1]:
        print('{}...'.format(c))

        f1, swarmplt = plt.subplots(1)
        sns.swarmplot(data=df[[df.columns[0], c]], ax=swarmplt)
        sns_yspans = []
        for coll in swarmplt.collections:
            sns_yspans.append(get_swarm_yspans(coll))

        f2, b = _api.plot(data=df, idx=(df.columns[0], c))
        dabest_yspans = []
        for coll in f2.axes[0].collections:
            dabest_yspans.append(get_swarm_yspans(coll))

        for j, span in enumerate(sns_yspans):
            assert span == pytest.approx(dabest_yspans[j])