Python networkx.minimum_spanning_tree方法代碼示例

# 需要導入模塊: import networkx [as 別名]
# 或者: from networkx import minimum_spanning_tree [as 別名]
def ensure_names_are_connected(graph, aids_list):
    aug_graph = graph.copy().to_undirected()
    orig_edges = aug_graph.edges()
    unflat_edges = [list(itertools.product(aids, aids)) for aids in aids_list]
    aid_pairs = [tup for tup in ut.iflatten(unflat_edges) if tup[0] != tup[1]]
    new_edges = ut.setdiff_ordered(aid_pairs, aug_graph.edges())

    preweighted_edges = nx.get_edge_attributes(aug_graph, 'weight')
    if preweighted_edges:
        orig_edges = ut.setdiff(orig_edges, list(preweighted_edges.keys()))

    aug_graph.add_edges_from(new_edges)
    # Ensure the largest possible set of original edges is in the MST
    nx.set_edge_attributes(aug_graph, name='weight', values=dict([(edge, 1.0) for edge in new_edges]))
    nx.set_edge_attributes(aug_graph, name='weight', values=dict([(edge, 0.1) for edge in orig_edges]))
    for cc_sub_graph in nx.connected_component_subgraphs(aug_graph):
        mst_sub_graph = nx.minimum_spanning_tree(cc_sub_graph)
        for edge in mst_sub_graph.edges():
            redge = edge[::-1]
            if not (graph.has_edge(*edge) or graph.has_edge(*redge)):
                graph.add_edge(*redge, attr_dict={}) 

# 需要導入模塊: import networkx [as 別名]
# 或者: from networkx import minimum_spanning_tree [as 別名]
def get_tree_schedule(frcs, graph):
    """
    Find the most constrained tree in the graph and returns which messages to compute
    it.  This is the minimum spanning tree of the perturb_radius edge attribute.

    See forward_pass for parameters.

    Returns
    -------
    tree_schedules : numpy.ndarray of numpy.int
        Describes how to compute the max marginal for the most constrained tree.
        Nx3 2D array of (source pool_idx, target pool_idx, perturb radius), where
        each row represents a single outgoing factor message computation.
    """
    min_tree = nx.minimum_spanning_tree(graph, 'perturb_radius')
    return np.array([(target, source, graph.edge[source][target]['perturb_radius'])
                     for source, target in nx.dfs_edges(min_tree)])[::-1] 

# 需要導入模塊: import networkx [as 別名]
# 或者: from networkx import minimum_spanning_tree [as 別名]
def createSteinerTree(graph, distances, inner_nodes):
    """
    Computes a steiner tree with minimal sum of pipeline lengths;
    updates distances such that only arcs of the spanning tree are contained with corresponding length

    :param graph: an undirected networkx graph: Its edges have the attribute length which is the pipeline length in [m]
    :type graph: networkx graph object

    :param distances: pipeline distances in the length unit specified in the esM object
    :type distances: pandas series

    :return spanning tree with sum of lengths of pipelines is minimal
    :rtype: graph object of networkx
    """
    from networkx.algorithms import approximation
    
    # type and value check
    isNetworkxGraph(graph)
    isPandasSeriesPositiveNumber(distances)

    # compute spanning tree with minimal sum of pipeline lengths
    S = approximation.steiner_tree(graph, terminal_nodes=inner_nodes, weight='length')
    # TODO check why function fails when MST function is not called here
    S = nx.minimum_spanning_tree(S, weight='length')
    # delete edges that are in graph but not in the tree from the distance matrix
    edgesToDelete = []
    for edge in distances.index:
        # check if edge or its reversed edge are contained in the tree
        # you have to check both directions because we have an undirected graph
        if edge not in S.edges and (edge[1], edge[0]) not in S.edges:
            edgesToDelete.append(edge)
    distances = distances.drop(edgesToDelete)

    return S, distances 

# 需要導入模塊: import networkx [as 別名]
# 或者: from networkx import minimum_spanning_tree [as 別名]
def get_clique_tree(nodes, edges):
    """Given a set of int nodes i and edges (i,j), returns an nx.Graph object G
    which is a clique tree, where:
        - G.node[i]['members'] contains the set of original nodes in the ith
            maximal clique
        - G[i][j]['members'] contains the set of original nodes in the seperator
            set between maximal cliques i and j

    Note: This method is currently only implemented for chordal graphs; TODO:
    add a step to triangulate non-chordal graphs.
    """
    # Form the original graph G1
    G1 = nx.Graph()
    G1.add_nodes_from(nodes)
    G1.add_edges_from(edges)

    # Check if graph is chordal
    # TODO: Add step to triangulate graph if not
    if not nx.is_chordal(G1):
        raise NotImplementedError("Graph triangulation not implemented.")

    # Create maximal clique graph G2
    # Each node is a maximal clique C_i
    # Let w = |C_i \cap C_j|; C_i, C_j have an edge with weight w if w > 0
    G2 = nx.Graph()
    for i, c in enumerate(nx.chordal_graph_cliques(G1)):
        G2.add_node(i, members=c)
    for i in G2.nodes:
        for j in G2.nodes:
            S = G2.node[i]["members"].intersection(G2.node[j]["members"])
            w = len(S)
            if w > 0:
                G2.add_edge(i, j, weight=w, members=S)

    # Return a minimum spanning tree of G2
    return nx.minimum_spanning_tree(G2) 

# 需要導入模塊: import networkx [as 別名]
# 或者: from networkx import minimum_spanning_tree [as 別名]
def weighted_one_edge_augmentation(G, avail, weight=None, partial=False):
    """Finds the minimum weight set of edges to connect G if one exists.

    This is a variant of the weighted MST problem.

    Example
    -------
    >>> G = nx.Graph([(1, 2), (2, 3), (4, 5)])
    >>> G.add_nodes_from([6, 7, 8])
    >>> # any edge not in avail has an implicit weight of infinity
    >>> avail = [(1, 3), (1, 5), (4, 7), (4, 8), (6, 1), (8, 1), (8, 2)]
    >>> sorted(weighted_one_edge_augmentation(G, avail))
    [(1, 5), (4, 7), (6, 1), (8, 1)]
    >>> # find another solution by giving large weights to edges in the
    >>> # previous solution (note some of the old edges must be used)
    >>> avail = [(1, 3), (1, 5, 99), (4, 7, 9), (6, 1, 99), (8, 1, 99), (8, 2)]
    >>> sorted(weighted_one_edge_augmentation(G, avail))
    [(1, 5), (4, 7), (6, 1), (8, 2)]
    """
    avail_uv, avail_w = _unpack_available_edges(avail, weight=weight, G=G)
    # Collapse CCs in the original graph into nodes in a metagraph
    # Then find an MST of the metagraph instead of the original graph
    C = collapse(G, nx.connected_components(G))
    mapping = C.graph['mapping']
    # Assign each available edge to an edge in the metagraph
    candidate_mapping = _lightest_meta_edges(mapping, avail_uv, avail_w)
    # nx.set_edge_attributes(C, name='weight', values=0)
    C.add_edges_from(
        (mu, mv, {'weight': w, 'generator': uv})
        for (mu, mv), uv, w in candidate_mapping
    )
    # Find MST of the meta graph
    meta_mst = nx.minimum_spanning_tree(C)
    if not partial and not nx.is_connected(meta_mst):
        raise nx.NetworkXUnfeasible(
            'Not possible to connect G with available edges')
    # Yield the edge that generated the meta-edge
    for mu, mv, d in meta_mst.edges(data=True):
        if 'generator' in d:
            edge = d['generator']
            yield edge 

# 需要導入模塊: import networkx [as 別名]
# 或者: from networkx import minimum_spanning_tree [as 別名]
def augment_graph_mst(ibs, graph):
    import plottool_ibeis as pt
    #spantree_aids1_ = []
    #spantree_aids2_ = []
    # Add edges between all names
    aid_list = list(graph.nodes())
    aug_digraph = graph.copy()
    # Change all weights in initial graph to be small (likely to be part of mst)
    nx.set_edge_attributes(aug_digraph, name='weight', values=.0001)
    aids1, aids2 = get_name_rowid_edges_from_aids(ibs, aid_list)
    if False:
        # Weight edges in the MST based on tenative distances
        # Get tentative node positions
        initial_pos = pt.get_nx_layout(graph.to_undirected(), 'graphviz')['node_pos']
        #initial_pos = pt.get_nx_layout(graph.to_undirected(), 'agraph')['node_pos']
        edge_pts1 = ut.dict_take(initial_pos, aids1)
        edge_pts2 = ut.dict_take(initial_pos, aids2)
        edge_pts1 = vt.atleast_nd(np.array(edge_pts1, dtype=np.int32), 2)
        edge_pts2 = vt.atleast_nd(np.array(edge_pts2, dtype=np.int32), 2)
        edge_weights = vt.L2(edge_pts1, edge_pts2)
    else:
        edge_weights = [1.0] * len(aids1)
    # Create implicit fully connected (by name) graph
    aug_edges = [(a1, a2, {'weight': w})
                  for a1, a2, w in zip(aids1, aids2, edge_weights)]
    aug_digraph.add_edges_from(aug_edges)

    # Determine which edges need to be added to
    # make original graph connected by name
    aug_graph = aug_digraph.to_undirected()
    for cc_sub_graph in nx.connected_component_subgraphs(aug_graph):
        mst_sub_graph = nx.minimum_spanning_tree(cc_sub_graph)
        mst_edges = mst_sub_graph.edges()
        for edge in mst_edges:
            redge = edge[::-1]
            #attr_dict = {'color': pt.DARK_ORANGE[0:3]}
            attr_dict = {'color': pt.BLACK[0:3]}
            if not (graph.has_edge(*edge) or graph.has_edge(*redge)):
                graph.add_edge(*redge, attr_dict=attr_dict) 

# 需要導入模塊: import networkx [as 別名]
# 或者: from networkx import minimum_spanning_tree [as 別名]
def find_tree(sub_network, weight='x_pu'):
    """Get the spanning tree of the graph, choose the node with the
    highest degree as a central "tree slack" and then see for each
    branch which paths from the slack to each node go through the
    branch.

    """

    branches_bus0 = sub_network.branches()["bus0"]
    branches_i = branches_bus0.index
    buses_i = sub_network.buses_i()

    graph = sub_network.graph(weight=weight, inf_weight=1.)
    sub_network.tree = nx.minimum_spanning_tree(graph)

    #find bus with highest degree to use as slack
    tree_slack_bus, slack_degree = max(degree(sub_network.tree), key=itemgetter(1))
    logger.debug("Tree slack bus is %s with degree %d.", tree_slack_bus, slack_degree)

    #determine which buses are supplied in tree through branch from slack

    #matrix to store tree structure
    sub_network.T = dok_matrix((len(branches_i),len(buses_i)))

    for j,bus in enumerate(buses_i):
        path = nx.shortest_path(sub_network.tree,bus,tree_slack_bus)
        for i in range(len(path)-1):
            branch = next(iterkeys(graph[path[i]][path[i+1]]))
            branch_i = branches_i.get_loc(branch)
            sign = +1 if branches_bus0.iat[branch_i] == path[i] else -1
            sub_network.T[branch_i,j] = sign 

# 需要導入模塊: import networkx [as 別名]
# 或者: from networkx import minimum_spanning_tree [as 別名]
def main():
	# build up a graph
	filename = '../../florentine_families_graph.gpickle'
	G = nx.read_gpickle(filename)

	# Spanning tree
	mst = nx.minimum_spanning_tree(G) 
	out_file = 'florentine_families_graph_minimum_spanning_tree.png'
	PlotGraph.plot_graph(G, filename=out_file, colored_edges=mst.edges())

	edges = nx.minimum_spanning_edges(G, weight='weight', data=True)
	list_edges = list(edges)
	print(list_edges) 

# 需要導入模塊: import networkx [as 別名]
# 或者: from networkx import minimum_spanning_tree [as 別名]
def test_mst(self):
        T=nx.minimum_spanning_tree(self.G)
        assert_equal(T.edges(data=True),self.tree_edgelist) 

# 需要導入模塊: import networkx [as 別名]
# 或者: from networkx import minimum_spanning_tree [as 別名]
def test_mst_disconnected(self):
        G=nx.Graph()
        G.add_path([1,2])
        G.add_path([10,20])
        T=nx.minimum_spanning_tree(G)
        assert_equal(sorted(map(sorted,T.edges())),[[1, 2], [10, 20]])
        assert_equal(sorted(T.nodes()),[1, 2, 10, 20]) 

# 需要導入模塊: import networkx [as 別名]
# 或者: from networkx import minimum_spanning_tree [as 別名]
def test_mst_isolate(self):
        G=nx.Graph()
        G.add_nodes_from([1,2])
        T=nx.minimum_spanning_tree(G)
        assert_equal(sorted(T.nodes()),[1, 2])
        assert_equal(sorted(T.edges()),[]) 

# 需要導入模塊: import networkx [as 別名]
# 或者: from networkx import minimum_spanning_tree [as 別名]
def test_mst_attributes(self):
        G=nx.Graph()
        G.add_edge(1,2,weight=1,color='red',distance=7)
        G.add_edge(2,3,weight=1,color='green',distance=2)
        G.add_edge(1,3,weight=10,color='blue',distance=1)
        G.add_node(13,color='purple')
        G.graph['foo']='bar'
        T=nx.minimum_spanning_tree(G)
        assert_equal(T.graph,G.graph)
        assert_equal(T.node[13],G.node[13])
        assert_equal(T.edge[1][2],G.edge[1][2]) 

# 需要導入模塊: import networkx [as 別名]
# 或者: from networkx import minimum_spanning_tree [as 別名]
def test_unknown_algorithm():
    nx.minimum_spanning_tree(nx.Graph(), algorithm='random') 

# 需要導入模塊: import networkx [as 別名]
# 或者: from networkx import minimum_spanning_tree [as 別名]
def test_minimum_tree(self):
        T = nx.minimum_spanning_tree(self.G, algorithm=self.algo)
        actual = sorted(T.edges(data=True))
        assert_edges_equal(actual, self.minimum_spanning_edgelist) 

# 需要導入模塊: import networkx [as 別名]
# 或者: from networkx import minimum_spanning_tree [as 別名]
def test_disconnected(self):
        G = nx.Graph([(0, 1, dict(weight=1)), (2, 3, dict(weight=2))])
        T = nx.minimum_spanning_tree(G, algorithm=self.algo)
        assert_nodes_equal(list(T), list(range(4)))
        assert_edges_equal(list(T.edges()), [(0, 1), (2, 3)])