Python matplotlib.transforms方法代碼示例

# 需要導入模塊: import matplotlib [as 別名]
# 或者: from matplotlib import transforms [as 別名]
def test_imshow_clip():
    # As originally reported by Gellule Xg <gellule.xg@free.fr>

    #Create a NxN image
    N = 100
    (x, y) = np.indices((N, N))
    x -= N//2
    y -= N//2
    r = np.sqrt(x**2+y**2-x*y)

    #Create a contour plot at N/4 and extract both the clip path and transform
    fig = plt.figure()
    ax = fig.add_subplot(111)

    c = ax.contour(r, [N/4])
    x = c.collections[0]
    clipPath = x.get_paths()[0]
    clipTransform = x.get_transform()

    from matplotlib.transforms import TransformedPath
    clip_path = TransformedPath(clipPath, clipTransform)

    #Plot the image clipped by the contour
    ax.imshow(r, clip_path=clip_path) 

# 需要導入模塊: import matplotlib [as 別名]
# 或者: from matplotlib import transforms [as 別名]
def set_position(self, pos, which='both'):
        """
        Set the axes position.

        Axes have two position attributes. The 'original' position is the
        position allocated for the Axes. The 'active' position is the
        position the Axes is actually drawn at. These positions are usually
        the same unless a fixed aspect is set to the Axes. See `.set_aspect`
        for details.

        Parameters
        ----------
        pos : [left, bottom, width, height] or `~matplotlib.transforms.Bbox`
            The new position of the in `.Figure` coordinates.

        which : {'both', 'active', 'original'}, optional
            Determines which position variables to change.

        """
        self._set_position(pos, which='both')
        # because this is being called externally to the library we
        # zero the constrained layout parts.
        self._layoutbox = None
        self._poslayoutbox = None 

# 需要導入模塊: import matplotlib [as 別名]
# 或者: from matplotlib import transforms [as 別名]
def test_imshow_clip():
    # As originally reported by Gellule Xg <gellule.xg@free.fr>

    # Create a NxN image
    N = 100
    (x, y) = np.indices((N, N))
    x -= N//2
    y -= N//2
    r = np.sqrt(x**2+y**2-x*y)

    # Create a contour plot at N/4 and extract both the clip path and transform
    fig, ax = plt.subplots()

    c = ax.contour(r, [N/4])
    x = c.collections[0]
    clipPath = x.get_paths()[0]
    clipTransform = x.get_transform()

    from matplotlib.transforms import TransformedPath
    clip_path = TransformedPath(clipPath, clipTransform)

    # Plot the image clipped by the contour
    ax.imshow(r, clip_path=clip_path) 

# 需要導入模塊: import matplotlib [as 別名]
# 或者: from matplotlib import transforms [as 別名]
def set_position(self, pos, which='both'):
        """
        Set the axes position.

        Axes have two position attributes. The 'original' position is the
        position allocated for the Axes. The 'active' position is the
        position the Axes is actually drawn at. These positions are usually
        the same unless a fixed aspect is set to the Axes. See `.set_aspect`
        for details.

        Parameters
        ----------
        pos : [left, bottom, width, height] or `~matplotlib.transforms.Bbox`
            The new position of the in `.Figure` coordinates.

        which : {'both', 'active', 'original'}, optional
            Determines which position variables to change.

        """
        self._set_position(pos, which=which)
        # because this is being called externally to the library we
        # zero the constrained layout parts.
        self._layoutbox = None
        self._poslayoutbox = None 

# 需要導入模塊: import matplotlib [as 別名]
# 或者: from matplotlib import transforms [as 別名]
def set_position(self, pos, which='both'):
        """
        Set the axes position.

        Axes have two position attributes. The 'original' position is the
        position allocated for the Axes. The 'active' position is the
        position the Axes is actually drawn at. These positions are usually
        the same unless a fixed aspect is set to the Axes. See `.set_aspect`
        for details.

        Parameters
        ----------
        pos : [left, bottom, width, height] or `~matplotlib.transforms.Bbox`
            The new position of the in `.Figure` coordinates.

        which : ['both' | 'active' | 'original'], optional
            Determines which position variables to change.

        """
        self._set_position(pos, which='both')
        # because this is being called externally to the library we
        # zero the constrained layout parts.
        self._layoutbox = None
        self._poslayoutbox = None 

# 需要導入模塊: import matplotlib [as 別名]
# 或者: from matplotlib import transforms [as 別名]
def get_window_extent(self, renderer=None):
        # make sure the location is updated so that transforms etc are
        # correct:
        self._adjust_location()
        return super().get_window_extent(renderer=renderer) 

# 需要導入模塊: import matplotlib [as 別名]
# 或者: from matplotlib import transforms [as 別名]
def _set_lim_and_transforms(self):
        """
        set the *dataLim* and *viewLim*
        :class:`~matplotlib.transforms.Bbox` attributes and the
        *transScale*, *transData*, *transLimits* and *transAxes*
        transformations.

        .. note::

            This method is primarily used by rectilinear projections
            of the :class:`~matplotlib.axes.Axes` class, and is meant
            to be overridden by new kinds of projection axes that need
            different transformations and limits. (See
            :class:`~matplotlib.projections.polar.PolarAxes` for an
            example.

        """
        self.transAxes = mtransforms.BboxTransformTo(self.bbox)

        # Transforms the x and y axis separately by a scale factor.
        # It is assumed that this part will have non-linear components
        # (e.g., for a log scale).
        self.transScale = mtransforms.TransformWrapper(
            mtransforms.IdentityTransform())

        # An affine transformation on the data, generally to limit the
        # range of the axes
        self.transLimits = mtransforms.BboxTransformFrom(
            mtransforms.TransformedBbox(self.viewLim, self.transScale))

        # The parentheses are important for efficiency here -- they
        # group the last two (which are usually affines) separately
        # from the first (which, with log-scaling can be non-affine).
        self.transData = self.transScale + (self.transLimits + self.transAxes)

        self._xaxis_transform = mtransforms.blended_transform_factory(
            self.transData, self.transAxes)
        self._yaxis_transform = mtransforms.blended_transform_factory(
            self.transAxes, self.transData) 

# 需要導入模塊: import matplotlib [as 別名]
# 或者: from matplotlib import transforms [as 別名]
def set_position(self, pos, which='both'):
        """
        Set the axes position with::

          pos = [left, bottom, width, height]

        in relative 0,1 coords, or *pos* can be a
        :class:`~matplotlib.transforms.Bbox`

        There are two position variables: one which is ultimately
        used, but which may be modified by :meth:`apply_aspect`, and a
        second which is the starting point for :meth:`apply_aspect`.


        Optional keyword arguments:
          *which*

            ==========   ====================
            value        description
            ==========   ====================
            'active'     to change the first
            'original'   to change the second
            'both'       to change both
            ==========   ====================

        """
        if not isinstance(pos, mtransforms.BboxBase):
            pos = mtransforms.Bbox.from_bounds(*pos)
        if which in ('both', 'active'):
            self._position.set(pos)
        if which in ('both', 'original'):
            self._originalPosition.set(pos) 

# 需要導入模塊: import matplotlib [as 別名]
# 或者: from matplotlib import transforms [as 別名]
def update_datalim_bounds(self, bounds):
        """
        Update the datalim to include the given
        :class:`~matplotlib.transforms.Bbox` *bounds*
        """
        self.dataLim.set(mtransforms.Bbox.union([self.dataLim, bounds])) 

# 需要導入模塊: import matplotlib [as 別名]
# 或者: from matplotlib import transforms [as 別名]
def _need_lower(self):
        return (self._has_default_loc() or
                transforms.interval_contains(self.axes.lower_xlim,
                                             self.get_loc())) 

# 需要導入模塊: import matplotlib [as 別名]
# 或者: from matplotlib import transforms [as 別名]
def _need_upper(self):
        return (self._has_default_loc() or
                transforms.interval_contains(self.axes.upper_xlim,
                                             self.get_loc())) 

# 需要導入模塊: import matplotlib [as 別名]
# 或者: from matplotlib import transforms [as 別名]
def gridOn(self):
        return (self._gridOn and (self._has_default_loc() or
                transforms.interval_contains(self.get_view_interval(),
                                             self.get_loc()))) 

# 需要導入模塊: import matplotlib [as 別名]
# 或者: from matplotlib import transforms [as 別名]
def _set_lim_and_transforms(self):
        """
        This is called once when the plot is created to set up all the
        transforms for the data, text and grids.
        """
        rot = 30

        # Get the standard transform setup from the Axes base class
        Axes._set_lim_and_transforms(self)

        # Need to put the skew in the middle, after the scale and limits,
        # but before the transAxes. This way, the skew is done in Axes
        # coordinates thus performing the transform around the proper origin
        # We keep the pre-transAxes transform around for other users, like the
        # spines for finding bounds
        self.transDataToAxes = self.transScale + \
            self.transLimits + transforms.Affine2D().skew_deg(rot, 0)

        # Create the full transform from Data to Pixels
        self.transData = self.transDataToAxes + self.transAxes

        # Blended transforms like this need to have the skewing applied using
        # both axes, in axes coords like before.
        self._xaxis_transform = (transforms.blended_transform_factory(
            self.transScale + self.transLimits,
            transforms.IdentityTransform()) +
            transforms.Affine2D().skew_deg(rot, 0)) + self.transAxes 

# 需要導入模塊: import matplotlib [as 別名]
# 或者: from matplotlib import transforms [as 別名]
def update_datalim_bounds(self, bounds):
        """
        Extend the `~.Axes.datalim` BBox to include the given
        `~matplotlib.transforms.Bbox`.

        Parameters
        ----------
        bounds : `~matplotlib.transforms.Bbox`
        """
        self.dataLim.set(mtransforms.Bbox.union([self.dataLim, bounds])) 

# 需要導入模塊: import matplotlib [as 別名]
# 或者: from matplotlib import transforms [as 別名]
def __init__(self, transform, smin, smax, resolution=1000):
        # Call parent's constructor
        matplotlib.transforms.Transform.__init__(self)
        # Store transform object
        self._transform = transform

        # Generate input array
        self._s_range = np.linspace(smin, smax, resolution)
        # Evaluate provided transformation and store result
        self._x_range = transform.transform_non_affine(self._s_range)
        # Transform bounds and store
        self._xmin = transform.transform_non_affine(smin)
        self._xmax = transform.transform_non_affine(smax)
        if self._xmin > self._xmax:
            self._xmax, self._xmin = self._xmin, self._xmax