Python io.RawIOBase方法代碼示例

# 需要導入模塊: import io [as 別名]
# 或者: from io import RawIOBase [as 別名]
def compute(self, stream_in: RawIOBase, stream_out: RawIOBase = None):
        """Compute and return the hash for the given stream.

        The data is read from stream_in until EOF, given to the hasher, and
        written unmodified to the stream_out (unless it is None).

        :param stream_in: input stream.
        :type stream_in: io.RawIOBase

        :param stream_out: output stream.
        :type stream_out: io.RawIOBase
        """
        self._init_hashers()
        read_bytes = self.chunk_size
        while read_bytes == self.chunk_size:
            data = stream_in.read(self.chunk_size)
            read_bytes = len(data)
            for hasher in self._hashers.values():
                hasher.update(data)
            if stream_out is not None:
                stream_out.write(data) 

# 需要導入模塊: import io [as 別名]
# 或者: from io import RawIOBase [as 別名]
def _gen_file(self, filename, file_location=None, file=None, content_type=None):
		"""Yields the entire contents of a file.

		Parameters
		----------
		filename : str
			Filename of the file being opened and added to the HTTP body
		file_location : str
			Full path to the file being added, including the filename
		file : io.RawIOBase
			The binary file-like object whose contents should be streamed

			No contents will be streamed if this is ``None``.
		content_type : str
			The Content-Type of the file; if not set a value will be guessed
		"""
		yield from self._gen_file_start(filename, file_location, content_type)
		if file:
			yield from self._gen_file_chunks(file)
		yield from self._gen_file_end() 

# 需要導入模塊: import io [as 別名]
# 或者: from io import RawIOBase [as 別名]
def setUp(self):
        self.loop = self.new_test_loop()
        self.protocol = test_utils.make_test_protocol(asyncio.Protocol)
        self.pipe = mock.Mock(spec_set=io.RawIOBase)
        self.pipe.fileno.return_value = 5

        blocking_patcher = mock.patch('asyncio.unix_events._set_nonblocking')
        blocking_patcher.start()
        self.addCleanup(blocking_patcher.stop)

        fstat_patcher = mock.patch('os.fstat')
        m_fstat = fstat_patcher.start()
        st = mock.Mock()
        st.st_mode = stat.S_IFIFO
        m_fstat.return_value = st
        self.addCleanup(fstat_patcher.stop) 

# 需要導入模塊: import io [as 別名]
# 或者: from io import RawIOBase [as 別名]
def chunked_hash(stream: Union[io.RawIOBase, io.BufferedIOBase], chunk_size: int = DEFAULT_MD5_CHUNK_SIZE) -> List[bytes]:
    """Create a list of hashes of chunk_size size in bytes.

    Args:
          stream (Union[io.RawIOBase, io.BufferedIOBase]): The steam containing the bytes to be hashed.
          chunk_size (int): The md5 chunk size. Default is 10485760 (which is required for InstallApplication).

    Returns:
          List[str]: A list of md5 hashes calculated for each chunk
    """
    chunk = stream.read(chunk_size)
    hashes = []

    while chunk is not None:
        h = hashlib.md5()
        h.update(chunk)
        md5 = h.digest()
        hashes.append(md5)
        chunk = stream.read(chunk_size)

    return hashes 

# 需要導入模塊: import io [as 別名]
# 或者: from io import RawIOBase [as 別名]
def _gettextwriter(out, encoding):
    if out is None:
        import sys
        return sys.stdout

    if isinstance(out, io.TextIOBase):
        # use a text writer as is
        return out

    # wrap a binary writer with TextIOWrapper
    if isinstance(out, io.RawIOBase):
        # Keep the original file open when the TextIOWrapper is
        # destroyed
        class _wrapper:
            __class__ = out.__class__
            def __getattr__(self, name):
                return getattr(out, name)
        buffer = _wrapper()
        buffer.close = lambda: None
    else:
        # This is to handle passed objects that aren't in the
        # IOBase hierarchy, but just have a write method
        buffer = io.BufferedIOBase()
        buffer.writable = lambda: True
        buffer.write = out.write
        try:
            # TextIOWrapper uses this methods to determine
            # if BOM (for UTF-16, etc) should be added
            buffer.seekable = out.seekable
            buffer.tell = out.tell
        except AttributeError:
            pass
    return io.TextIOWrapper(buffer, encoding=encoding,
                            errors='xmlcharrefreplace',
                            newline='\n',
                            write_through=True) 

# 需要導入模塊: import io [as 別名]
# 或者: from io import RawIOBase [as 別名]
def __init__(self, sock, mode):
        if mode not in ("r", "w", "rw", "rb", "wb", "rwb"):
            raise ValueError("invalid mode: %r" % mode)
        io.RawIOBase.__init__(self)
        self._sock = sock
        if "b" not in mode:
            mode += "b"
        self._mode = mode
        self._reading = "r" in mode
        self._writing = "w" in mode
        self._timeout_occurred = False 

# 需要導入模塊: import io [as 別名]
# 或者: from io import RawIOBase [as 別名]
def close(self):
        """Close the SocketIO object.  This doesn't close the underlying
        socket, except if all references to it have disappeared.
        """
        if self.closed:
            return
        io.RawIOBase.close(self)
        self._sock._decref_socketios()
        self._sock = None 

# 需要導入模塊: import io [as 別名]
# 或者: from io import RawIOBase [as 別名]
def isatty(self):
        io.RawIOBase.isatty(self)
        return True 

# 需要導入模塊: import io [as 別名]
# 或者: from io import RawIOBase [as 別名]
def test_type_error_on_non_seekable_handle(self):
        with pytest.raises(TypeError):
            create_reader(io.RawIOBase()) 

# 需要導入模塊: import io [as 別名]
# 或者: from io import RawIOBase [as 別名]
def open(self, fname, mode='r', psw=None):
        """Returns file-like object (:class:`RarExtFile`) from where the data can be read.

        The object implements :class:`io.RawIOBase` interface, so it can
        be further wrapped with :class:`io.BufferedReader`
        and :class:`io.TextIOWrapper`.

        On older Python where io module is not available, it implements
        only .read(), .seek(), .tell() and .close() methods.

        The object is seekable, although the seeking is fast only on
        uncompressed files, on compressed files the seeking is implemented
        by reading ahead and/or restarting the decompression.

        Parameters:

            fname
                file name or RarInfo instance.
            mode
                must be 'r'
            psw
                password to use for extracting.
        """

        if mode != 'r':
            raise NotImplementedError("RarFile.open() supports only mode=r")

        # entry lookup
        inf = self.getinfo(fname)
        if inf.isdir():
            raise TypeError("Directory does not have any data: " + inf.filename)

        # check password
        if inf.needs_password():
            psw = psw or self._password
            if psw is None:
                raise PasswordRequired("File %s requires password" % inf.filename)
        else:
            psw = None

        return self._file_parser.open(inf, psw) 

# 需要導入模塊: import io [as 別名]
# 或者: from io import RawIOBase [as 別名]
def readall(self):
        """Read all remaining data"""
        # avoid RawIOBase default impl
        return self.read() 

# 需要導入模塊: import io [as 別名]
# 或者: from io import RawIOBase [as 別名]
def _gettextwriter(out, encoding):
    if out is None:
        import sys
        out = sys.stdout

    if isinstance(out, io.RawIOBase):
        buffer = io.BufferedIOBase(out)
        # Keep the original file open when the TextIOWrapper is
        # destroyed
        buffer.close = lambda: None
    else:
        # This is to handle passed objects that aren't in the
        # IOBase hierarchy, but just have a write method
        buffer = io.BufferedIOBase()
        buffer.writable = lambda: True
        buffer.write = out.write
        try:
            # TextIOWrapper uses this methods to determine
            # if BOM (for UTF-16, etc) should be added
            buffer.seekable = out.seekable
            buffer.tell = out.tell
        except AttributeError:
            pass
    # wrap a binary writer with TextIOWrapper
    return _UnbufferedTextIOWrapper(buffer, encoding=encoding,
                                   errors='xmlcharrefreplace',
                                   newline='\n') 

# 需要導入模塊: import io [as 別名]
# 或者: from io import RawIOBase [as 別名]
def _gen_file_chunks(self, file):
		"""Yields chunks of a file.

		Parameters
		----------
		fp : io.RawIOBase
			The file to break into chunks
			(must be an open file or have the ``readinto`` method)
		"""
		while True:
			buf = file.read(self.chunk_size)
			if len(buf) < 1:
				break
			yield buf 

# 需要導入模塊: import io [as 別名]
# 或者: from io import RawIOBase [as 別名]
def write(self, path, file, offset=0, create=False, truncate=False, count=None, **kwargs):
		"""Writes to a mutable file in the MFS.

		.. code-block:: python

			>>> client.files.write("/test/file", io.BytesIO(b"hi"), create=True)

		Parameters
		----------
		path : str
			Filepath within the MFS
		file : Union[str, bytes, os.PathLike, io.RawIOBase, int]
			IO stream object with data that should be written
		offset : int
			Byte offset at which to begin writing at
		create : bool
			Create the file if it does not exist
		truncate : bool
			Truncate the file to size zero before writing
		count : int
			Maximum number of bytes to read from the source ``file``
		"""
		opts = {"offset": offset, "create": create, "truncate": truncate}
		if count is not None:
			opts["count"] = count
		kwargs.setdefault("opts", {}).update(opts)

		args = (path,)
		body, headers = multipart.stream_files(file, chunk_size=self.chunk_size)
		return self._client.request('/files/write', args, data=body, headers=headers, **kwargs) 

# 需要導入模塊: import io [as 別名]
# 或者: from io import RawIOBase [as 別名]
def _gettextwriter(out, encoding):
    if out is None:
        import sys
        out = sys.stdout

    if isinstance(out, io.RawIOBase):
        buffer = io.BufferedIOBase(out)
        # Keep the original file open when the TextIOWrapper is
        # destroyed
        buffer.close = lambda: None
    else:
        # This is to handle passed objects that aren't in the
        # IOBase hierarchy, but just have a write method
        buffer = io.BufferedIOBase()
        buffer.writable = lambda: True
        buffer.write = out.write
        try:
            # TextIOWrapper uses this methods to determine
            # if BOM (for UTF-16, etc) should be added
            buffer.seekable = out.seekable
            buffer.tell = out.tell
        except AttributeError:
            pass
    # wrap a binary writer with TextIOWrapper
    class UnbufferedTextIOWrapper(io.TextIOWrapper):
        def write(self, s):
            super(UnbufferedTextIOWrapper, self).write(s)
            self.flush()
    return UnbufferedTextIOWrapper(buffer, encoding=encoding,
                                   errors='xmlcharrefreplace',
                                   newline='\n')