Python smb.SMBCommand方法代碼示例

本文整理匯總了Python中impacket.smb.SMBCommand方法的典型用法代碼示例。如果您正苦於以下問題：Python smb.SMBCommand方法的具體用法？Python smb.SMBCommand怎麽用？Python smb.SMBCommand使用的例子？那麽, 這裏精選的方法代碼示例或許可以為您提供幫助。您也可以進一步了解該方法所在類impacket.smb的用法示例。

在下文中一共展示了smb.SMBCommand方法的15個代碼示例，這些例子默認根據受歡迎程度排序。您可以為喜歡或者感覺有用的代碼點讚，您的評價將有助於係統推薦出更棒的Python代碼示例。

示例1: nt_create_andx

# 需要導入模塊: from impacket import smb [as 別名]
# 或者: from impacket.smb import SMBCommand [as 別名]
def nt_create_andx(self, treeId, fileName, smb_packet=None, cmd = None):
        if len(fileName) > 0 and fileName[0] == '\\':
            fileName = fileName[1:]
 
        if cmd is not None:
            from impacket import smb
            ntCreate = smb.SMBCommand(data = str(cmd))
            params = smb.SMBNtCreateAndX_Parameters(ntCreate['Parameters'])
            return self.create(treeId, fileName, params['AccessMask'], params['ShareAccess'],
                               params['CreateOptions'], params['Disposition'], params['FileAttributes'],
                               params['Impersonation'], params['SecurityFlags'])
                               
        else:
            return self.create(treeId, fileName, 
                    FILE_READ_DATA | FILE_WRITE_DATA | FILE_APPEND_DATA | FILE_READ_EA |
                    FILE_WRITE_EA | FILE_WRITE_ATTRIBUTES | FILE_READ_ATTRIBUTES | READ_CONTROL,
                    FILE_SHARE_READ | FILE_SHARE_WRITE, FILE_NON_DIRECTORY_FILE, FILE_OPEN, 0 )

開發者ID:joxeankoret，項目名稱:CVE-2017-7494，代碼行數:19，代碼來源:smb3.py

示例2: create_trans_packet

# 需要導入模塊: from impacket import smb [as 別名]
# 或者: from impacket.smb import SMBCommand [as 別名]
def create_trans_packet(self, setup, param='', data='', mid=None, maxSetupCount=None, totalParameterCount=None, totalDataCount=None, maxParameterCount=None, maxDataCount=None, pid=None, tid=None, noPad=False):
		if maxSetupCount is None:
			maxSetupCount = len(setup)
		if totalParameterCount is None:
			totalParameterCount = len(param)
		if totalDataCount is None:
			totalDataCount = len(data)
		if maxParameterCount is None:
			maxParameterCount = totalParameterCount
		if maxDataCount is None:
			maxDataCount = totalDataCount
		transCmd = smb.SMBCommand(smb.SMB.SMB_COM_TRANSACTION)
		transCmd['Parameters'] = smb.SMBTransaction_Parameters()
		transCmd['Parameters']['TotalParameterCount'] = totalParameterCount
		transCmd['Parameters']['TotalDataCount'] = totalDataCount
		transCmd['Parameters']['MaxParameterCount'] = maxParameterCount
		transCmd['Parameters']['MaxDataCount'] = maxDataCount
		transCmd['Parameters']['MaxSetupCount'] = maxSetupCount
		transCmd['Parameters']['Flags'] = 0
		transCmd['Parameters']['Timeout'] = 0xffffffff
		transCmd['Parameters']['ParameterCount'] = len(param)
		transCmd['Parameters']['DataCount'] = len(data)
		transCmd['Parameters']['Setup'] = setup
		_put_trans_data(transCmd, param, data, noPad)
		return self.create_smb_packet(transCmd, mid, pid, tid)

開發者ID:offensive-security，項目名稱:exploitdb-bin-sploits，代碼行數:27，代碼來源:42315.py

示例3: create_trans2_packet

# 需要導入模塊: from impacket import smb [as 別名]
# 或者: from impacket.smb import SMBCommand [as 別名]
def create_trans2_packet(self, setup, param='', data='', mid=None, maxSetupCount=None, totalParameterCount=None, totalDataCount=None, maxParameterCount=None, maxDataCount=None, pid=None, tid=None, noPad=False):
		if maxSetupCount is None:
			maxSetupCount = len(setup)
		if totalParameterCount is None:
			totalParameterCount = len(param)
		if totalDataCount is None:
			totalDataCount = len(data)
		if maxParameterCount is None:
			maxParameterCount = totalParameterCount
		if maxDataCount is None:
			maxDataCount = totalDataCount
		transCmd = smb.SMBCommand(smb.SMB.SMB_COM_TRANSACTION2)
		transCmd['Parameters'] = smb.SMBTransaction2_Parameters()
		transCmd['Parameters']['TotalParameterCount'] = totalParameterCount
		transCmd['Parameters']['TotalDataCount'] = totalDataCount
		transCmd['Parameters']['MaxParameterCount'] = maxParameterCount
		transCmd['Parameters']['MaxDataCount'] = maxDataCount
		transCmd['Parameters']['MaxSetupCount'] = len(setup)
		transCmd['Parameters']['Flags'] = 0
		transCmd['Parameters']['Timeout'] = 0xffffffff
		transCmd['Parameters']['ParameterCount'] = len(param)
		transCmd['Parameters']['DataCount'] = len(data)
		transCmd['Parameters']['Setup'] = setup
		_put_trans_data(transCmd, param, data, noPad)
		return self.create_smb_packet(transCmd, mid, pid, tid)

開發者ID:offensive-security，項目名稱:exploitdb-bin-sploits，代碼行數:27，代碼來源:42315.py

示例4: create_nt_trans_packet

# 需要導入模塊: from impacket import smb [as 別名]
# 或者: from impacket.smb import SMBCommand [as 別名]
def create_nt_trans_packet(self, function, setup='', param='', data='', mid=None, maxSetupCount=None, totalParameterCount=None, totalDataCount=None, maxParameterCount=None, maxDataCount=None, pid=None, tid=None, noPad=False):
		if maxSetupCount is None:
			maxSetupCount = len(setup)
		if totalParameterCount is None:
			totalParameterCount = len(param)
		if totalDataCount is None:
			totalDataCount = len(data)
		if maxParameterCount is None:
			maxParameterCount = totalParameterCount
		if maxDataCount is None:
			maxDataCount = totalDataCount
		transCmd = smb.SMBCommand(smb.SMB.SMB_COM_NT_TRANSACT)
		transCmd['Parameters'] = smb.SMBNTTransaction_Parameters()
		transCmd['Parameters']['MaxSetupCount'] = maxSetupCount
		transCmd['Parameters']['TotalParameterCount'] = totalParameterCount
		transCmd['Parameters']['TotalDataCount'] = totalDataCount
		transCmd['Parameters']['MaxParameterCount'] = maxParameterCount
		transCmd['Parameters']['MaxDataCount'] = maxDataCount
		transCmd['Parameters']['ParameterCount'] = len(param)
		transCmd['Parameters']['DataCount'] = len(data)
		transCmd['Parameters']['Function'] = function
		transCmd['Parameters']['Setup'] = setup
		_put_trans_data(transCmd, param, data, noPad)
		return self.create_smb_packet(transCmd, mid, pid, tid)

開發者ID:offensive-security，項目名稱:exploitdb-bin-sploits，代碼行數:26，代碼來源:42315.py

示例5: smbCommandHook_SMB_COM_TREE_CONNECT_ANDX

# 需要導入模塊: from impacket import smb [as 別名]
# 或者: from impacket.smb import SMBCommand [as 別名]
def smbCommandHook_SMB_COM_TREE_CONNECT_ANDX(connId, smbServer, SMBCommand, recvPacket):
    treeConnectAndXParameters = smb.SMBTreeConnectAndX_Parameters(SMBCommand['Parameters'])

    treeConnectAndXData = smb.SMBTreeConnectAndX_Data(flags=recvPacket['Flags2'])
    treeConnectAndXData['_PasswordLength'] = treeConnectAndXParameters['PasswordLength']
    treeConnectAndXData.fromString(SMBCommand['Data'])

    path = smbserver.decodeSMBString(recvPacket['Flags2'], treeConnectAndXData['Path'])
    local_path = ntpath.basename(path)
    service = smbserver.decodeSMBString(recvPacket['Flags2'], treeConnectAndXData['Service'])

    report_tree_connect_attempt(connId, {"Path": path, "local_path": local_path, "Service": service})

    return smbserver.SMBCommands.smbComTreeConnectAndX(smbserver.SMBCommands(), connId, smbServer, SMBCommand, recvPacket)


# Overriding this allows us to claim we have no shares, so we still get ANDX data, but don't need to share anything

開發者ID:cylance，項目名稱:SMBTrap，代碼行數:19，代碼來源:smbtrap2.py

示例6: sendEcho

# 需要導入模塊: from impacket import smb [as 別名]
# 或者: from impacket.smb import SMBCommand [as 別名]
def sendEcho(conn, tid, data):
	pkt = smb.NewSMBPacket()
	pkt['Tid'] = tid

	transCommand = smb.SMBCommand(smb.SMB.SMB_COM_ECHO)
	transCommand['Parameters'] = smb.SMBEcho_Parameters()
	transCommand['Data'] = smb.SMBEcho_Data()

	transCommand['Parameters']['EchoCount'] = 1
	transCommand['Data']['Data'] = data
	pkt.addCommand(transCommand)

	conn.sendSMB(pkt)
	recvPkt = conn.recvSMB()
	if recvPkt.getNTStatus() == 0:
		print('got good ECHO response')
	else:
		print('got bad ECHO response: 0x{:x}'.format(recvPkt.getNTStatus()))


# override SMB.neg_session() to allow forcing ntlm authentication

開發者ID:3ndG4me，項目名稱:AutoBlue-MS17-010，代碼行數:23，代碼來源:eternalblue_exploit8.py

示例7: sendEcho

# 需要導入模塊: from impacket import smb [as 別名]
# 或者: from impacket.smb import SMBCommand [as 別名]
def sendEcho(conn, tid, data):
	pkt = smb.NewSMBPacket()
	pkt['Tid'] = tid

	transCommand = smb.SMBCommand(smb.SMB.SMB_COM_ECHO)
	transCommand['Parameters'] = smb.SMBEcho_Parameters()
	transCommand['Data'] = smb.SMBEcho_Data()

	transCommand['Parameters']['EchoCount'] = 1
	transCommand['Data']['Data'] = data
	pkt.addCommand(transCommand)

	conn.sendSMB(pkt)
	recvPkt = conn.recvSMB()
	if recvPkt.getNTStatus() == 0:
		print('got good ECHO response')
	else:
		print('got bad ECHO response: 0x{:x}'.format(recvPkt.getNTStatus()))

開發者ID:3ndG4me，項目名稱:AutoBlue-MS17-010，代碼行數:20，代碼來源:eternalblue_exploit7.py

示例8: nt_create_andx

# 需要導入模塊: from impacket import smb [as 別名]
# 或者: from impacket.smb import SMBCommand [as 別名]
def nt_create_andx(self, treeId, fileName, smb_packet=None, cmd = None):
        if len(fileName) > 0 and fileName[0] == '\\':
            fileName = fileName[1:]
 
        if cmd is not None:
            from impacket import smb
            ntCreate = smb.SMBCommand(data = cmd.getData())
            params = smb.SMBNtCreateAndX_Parameters(ntCreate['Parameters'])
            return self.create(treeId, fileName, params['AccessMask'], params['ShareAccess'],
                               params['CreateOptions'], params['Disposition'], params['FileAttributes'],
                               params['Impersonation'], params['SecurityFlags'])
                               
        else:
            return self.create(treeId, fileName, 
                    FILE_READ_DATA | FILE_WRITE_DATA | FILE_APPEND_DATA | FILE_READ_EA |
                    FILE_WRITE_EA | FILE_WRITE_ATTRIBUTES | FILE_READ_ATTRIBUTES | READ_CONTROL,
                    FILE_SHARE_READ | FILE_SHARE_WRITE, FILE_NON_DIRECTORY_FILE, FILE_OPEN, 0 )

開發者ID:Coalfire-Research，項目名稱:Slackor，代碼行數:19，代碼來源:smb3.py

示例9: smbComOpenAndX

# 需要導入模塊: from impacket import smb [as 別名]
# 或者: from impacket.smb import SMBCommand [as 別名]
def smbComOpenAndX( packet, packetNum, SMBCommand, questions, replies):

    # Test return code is always 0, otherwise leave before doing anything
    if packet['ErrorCode'] != 0:
        return True

    print "SMB_COM_OPEN_ANDX ",
    try:
      if (packet['Flags1'] & smb.SMB.FLAGS1_REPLY) == 0:
        # Query

        openAndXParameters = smb.SMBOpenAndX_Parameters(SMBCommand['Parameters'])
        openAndXData       = smb.SMBOpenAndX_Data(SMBCommand['Data'])

      else:
        # Response
        openFileResponse   = SMBCommand
        openFileParameters = smb.SMBOpenAndXResponse_Parameters(openFileResponse['Parameters'])


    except Exception, e:
        print "ERROR: %s" % e
        print "Command: 0x%x" % packet['Command']
        print "Packet: %d %r" % (packetNum, packet.getData())
        return True

開發者ID:tholum，項目名稱:PiBunny，代碼行數:27，代碼來源:smbtorture.py

示例10: smbComNtCreateAndX

# 需要導入模塊: from impacket import smb [as 別名]
# 或者: from impacket.smb import SMBCommand [as 別名]
def smbComNtCreateAndX( packet, packetNum, SMBCommand, questions, replies):

    # Test return code is always 0, otherwise leave before doing anything
    if packet['ErrorCode'] != 0:
        return False

    print "SMB_COM_NT_CREATE_ANDX ",
    try:
      if (packet['Flags1'] & smb.SMB.FLAGS1_REPLY) == 0:
        # Query
        ntCreateAndXParameters = smb.SMBNtCreateAndX_Parameters(SMBCommand['Parameters'])
        ntCreateAndXData       = smb.SMBNtCreateAndX_Data(SMBCommand['Data'])
      else:
        # Response
        ntCreateResponse   = SMBCommand
        ntCreateParameters = smb.SMBNtCreateAndXResponse_Parameters(ntCreateResponse['Parameters'])

    except Exception, e:
        print "ERROR: %s" % e
        print "Command: 0x%x" % packet['Command']
        print "Packet: %d %r" % (packetNum, packet.getData())
        return True

開發者ID:tholum，項目名稱:PiBunny，代碼行數:24，代碼來源:smbtorture.py

示例11: smbComTreeConnectAndX

# 需要導入模塊: from impacket import smb [as 別名]
# 或者: from impacket.smb import SMBCommand [as 別名]
def smbComTreeConnectAndX( packet, packetNum, SMBCommand, questions, replies):

    # Test return code is always 0, otherwise leave before doing anything
    if packet['ErrorCode'] != 0:
        return False

    print "SMB_COM_TREE_CONNECT_ANDX ",
    try:
      if (packet['Flags1'] & smb.SMB.FLAGS1_REPLY) == 0:
        # Query
        treeConnectAndXParameters = smb.SMBTreeConnectAndX_Parameters(SMBCommand['Parameters'])
        treeConnectAndXData       = smb.SMBTreeConnectAndX_Data()
        treeConnectAndXData['_PasswordLength'] = treeConnectAndXParameters['PasswordLength']
        treeConnectAndXData.fromString(SMBCommand['Data'])
      else:
        # Response
        treeConnectAndXParameters = smb.SMBTreeConnectAndXResponse_Parameters(SMBCommand['Parameters'])
        #treeConnectAndXData       = smb.SMBTreeConnectAndXResponse_Data(SMBCommand['Data'])
    except Exception, e:
        print "ERROR: %s" % e
        print "Command: 0x%x" % packet['Command']
        print "Packet: %d %r" % (packetNum, packet.getData())
        return True

開發者ID:tholum，項目名稱:PiBunny，代碼行數:25，代碼來源:smbtorture.py

示例12: send_echo

# 需要導入模塊: from impacket import smb [as 別名]
# 或者: from impacket.smb import SMBCommand [as 別名]
def send_echo(self, data):
		pkt = smb.NewSMBPacket()
		pkt['Tid'] = self._default_tid
		
		transCommand = smb.SMBCommand(smb.SMB.SMB_COM_ECHO)
		transCommand['Parameters'] = smb.SMBEcho_Parameters()
		transCommand['Data'] = smb.SMBEcho_Data()

		transCommand['Parameters']['EchoCount'] = 1
		transCommand['Data']['Data'] = data
		pkt.addCommand(transCommand)

		self.sendSMB(pkt)
		return self.recvSMB()

開發者ID:offensive-security，項目名稱:exploitdb-bin-sploits，代碼行數:16，代碼來源:42315.py

示例13: do_write_andx_raw_pipe

# 需要導入模塊: from impacket import smb [as 別名]
# 或者: from impacket.smb import SMBCommand [as 別名]
def do_write_andx_raw_pipe(self, fid, data, mid=None, pid=None, tid=None):
		writeAndX = smb.SMBCommand(smb.SMB.SMB_COM_WRITE_ANDX)
		writeAndX['Parameters'] = smb.SMBWriteAndX_Parameters_Short()
		writeAndX['Parameters']['Fid'] = fid
		writeAndX['Parameters']['Offset'] = 0
		writeAndX['Parameters']['WriteMode'] = 4  # SMB_WMODE_WRITE_RAW_NAMED_PIPE
		writeAndX['Parameters']['Remaining'] = 12345  # can be any. raw named pipe does not use it
		writeAndX['Parameters']['DataLength'] = len(data)
		writeAndX['Parameters']['DataOffset'] = 32 + len(writeAndX['Parameters']) + 1 + 2 + 1 # WordCount(1), ByteCount(2), Padding(1)
		writeAndX['Data'] = '\x00' + data  # pad 1 byte
		
		self.send_raw(self.create_smb_packet(writeAndX, mid, pid, tid))
		return self.recvSMB()

開發者ID:offensive-security，項目名稱:exploitdb-bin-sploits，代碼行數:15，代碼來源:42315.py

示例14: create_trans_secondary_packet

# 需要導入模塊: from impacket import smb [as 別名]
# 或者: from impacket.smb import SMBCommand [as 別名]
def create_trans_secondary_packet(self, mid, param='', paramDisplacement=0, data='', dataDisplacement=0, pid=None, tid=None, noPad=False):
		transCmd = smb.SMBCommand(smb.SMB.SMB_COM_TRANSACTION_SECONDARY)
		transCmd['Parameters'] = SMBTransactionSecondary_Parameters()
		transCmd['Parameters']['TotalParameterCount'] = len(param)
		transCmd['Parameters']['TotalDataCount'] = len(data)
		transCmd['Parameters']['ParameterCount'] = len(param)
		transCmd['Parameters']['ParameterDisplacement'] = paramDisplacement
		transCmd['Parameters']['DataCount'] = len(data)
		transCmd['Parameters']['DataDisplacement'] = dataDisplacement
		
		_put_trans_data(transCmd, param, data, noPad)
		return self.create_smb_packet(transCmd, mid, pid, tid)

開發者ID:offensive-security，項目名稱:exploitdb-bin-sploits，代碼行數:14，代碼來源:42315.py

示例15: create_nt_trans_secondary_packet

# 需要導入模塊: from impacket import smb [as 別名]
# 或者: from impacket.smb import SMBCommand [as 別名]
def create_nt_trans_secondary_packet(self, mid, param='', paramDisplacement=0, data='', dataDisplacement=0, pid=None, tid=None, noPad=False):
		transCmd = smb.SMBCommand(smb.SMB.SMB_COM_NT_TRANSACT_SECONDARY)
		transCmd['Parameters'] = SMBNTTransactionSecondary_Parameters()
		transCmd['Parameters']['TotalParameterCount'] = len(param)
		transCmd['Parameters']['TotalDataCount'] = len(data)
		transCmd['Parameters']['ParameterCount'] = len(param)
		transCmd['Parameters']['ParameterDisplacement'] = paramDisplacement
		transCmd['Parameters']['DataCount'] = len(data)
		transCmd['Parameters']['DataDisplacement'] = dataDisplacement
		_put_trans_data(transCmd, param, data, noPad)
		return self.create_smb_packet(transCmd, mid, pid, tid)

開發者ID:offensive-security，項目名稱:exploitdb-bin-sploits，代碼行數:13，代碼來源:42315.py

注：本文中的impacket.smb.SMBCommand方法示例由純淨天空整理自Github/MSDocs等開源代碼及文檔管理平台，相關代碼片段篩選自各路編程大神貢獻的開源項目，源碼版權歸原作者所有，傳播和使用請參考對應項目的License；未經允許，請勿轉載。