Python idaapi.o_imm方法代碼示例

# 需要導入模塊: import idaapi [as 別名]
# 或者: from idaapi import o_imm [as 別名]
def _process_stub_template_1(stub):
    """A template to match the following stub pattern:

    ADRP X<reg>, #<offset>@PAGE
    LDR  X<reg>, [X<reg>, #<offset>@PAGEOFF]
    BR   X<reg>
    """
    adrp, ldr, br = idau.Instructions(stub, count=3)
    if (adrp.itype == idaapi.ARM_adrp and adrp.Op1.type == idaapi.o_reg
            and adrp.Op2.type == idaapi.o_imm
            and ldr.itype == idaapi.ARM_ldr and ldr.Op1.type == idaapi.o_reg
            and ldr.Op2.type == idaapi.o_displ and ldr.auxpref == 0
            and br.itype == idaapi.ARM_br and br.Op1.type == idaapi.o_reg
            and adrp.Op1.reg == ldr.Op1.reg == ldr.Op2.reg == br.Op1.reg):
        offset = adrp.Op2.value + ldr.Op2.addr
        target = idau.read_word(offset)
        if target and idau.is_mapped(target):
            return target 

# 需要導入模塊: import idaapi [as 別名]
# 或者: from idaapi import o_imm [as 別名]
def op_num(ea, opnum):
    '''Set the type for operand `opnum` belonging to the instruction at `ea` to a number and return it.'''
    t = idaapi.num_flag()
    ok, signed = idaapi.set_op_type(ea, t, opnum), idaapi.is_invsign(ea, database.type.flags(ea), opnum)
    if not ok:
        raise E.DisassemblerError(u"{:s}.op_num({:#x}, {:d}) : Unable to restore the type of operand {:d} to a number.".format(__name__, ea, opnum, opnum))

    # Extract the operand's op_t and its maximum value, as we'll use this to
    # transform the value if necessary.
    res, max = operand(ea, opnum), 2 ** op_bits(ea, opnum)

    # If this is an immediate value, then we can treat it normally.
    if res.type in {idaapi.o_imm}:
        integer = res.value & (max - 1)
        return 0 if integer == 0 else (integer - max) if signed else integer

    # If the signed-flag is set in our operand, then convert it into its actual
    # signed value.
    maximum = math.trunc(2 ** math.ceil(math.log(idaapi.BADADDR, 2)))
    integer = (res.addr - maximum) if res.addr & (maximum // 2) else res.addr

    # Now we can return the value transformed if the operand has an inverted sign
    return 0 if integer == 0 else (maximum + integer) if signed and integer < 0 else (integer - maximum) if signed else integer 

# 需要導入模塊: import idaapi [as 別名]
# 或者: from idaapi import o_imm [as 別名]
def op_bin(ea, opnum):
    '''Set the type for operand `opnum` belonging to the instruction at `ea` to binary and return it.'''
    t = idaapi.bin_flag()
    ok, signed = idaapi.set_op_type(ea, t, opnum), idaapi.is_invsign(ea, database.type.flags(ea), opnum)
    if not ok:
        raise E.DisassemblerError(u"{:s}.op_bin({:#x}, {:d}) : Unable to set the type of operand {:d} to binary.".format(__name__, ea, opnum, opnum))

    # Extract the operand's op_t and its maximum value, as we'll use this to
    # transform the value if necessary.
    res, max = operand(ea, opnum), 2 ** op_bits(ea, opnum)

    # If this is an immediate value, then we can treat it normally.
    if res.type in {idaapi.o_imm}:
        integer = res.value & (max - 1)
        return 0 if integer == 0 else (integer - max) if signed else integer

    # If the signed-flag is set in our operand, then convert it into its actual
    # signed value.
    maximum = math.trunc(2 ** math.ceil(math.log(idaapi.BADADDR, 2)))
    integer = (res.addr - maximum) if res.addr & (maximum // 2) else res.addr

    # Now we can return the value transformed if the operand has an inverted sign
    return 0 if integer == 0 else (maximum + integer) if signed and integer < 0 else (integer - maximum) if signed else integer 

# 需要導入模塊: import idaapi [as 別名]
# 或者: from idaapi import o_imm [as 別名]
def op_oct(ea, opnum):
    '''Set the type for operand `opnum` belonging to the instruction at `ea` to octal and return it.'''
    t = idaapi.oct_flag()
    ok, signed = idaapi.set_op_type(ea, t, opnum), idaapi.is_invsign(ea, database.type.flags(ea), opnum)
    if not ok:
        raise E.DisassemblerError(u"{:s}.op_oct({:#x}, {:d}) : Unable to set the type of operand {:d} to octal.".format(__name__, ea, opnum, opnum))

    # Extract the operand's op_t and its maximum value, as we'll use this to
    # transform the value if necessary.
    res, max = operand(ea, opnum), 2 ** op_bits(ea, opnum)

    # If this is an immediate value, then we can treat it normally.
    if res.type in {idaapi.o_imm}:
        integer = res.value & (max - 1)
        return 0 if integer == 0 else (integer - max) if signed else integer

    # If the signed-flag is set in our operand, then convert it into its actual
    # signed value.
    maximum = math.trunc(2 ** math.ceil(math.log(idaapi.BADADDR, 2)))
    integer = (res.addr - maximum) if res.addr & (maximum // 2) else res.addr

    # Now we can return the value transformed if the operand has an inverted sign
    return 0 if integer == 0 else (maximum + integer) if signed and integer < 0 else (integer - maximum) if signed else integer 

# 需要導入模塊: import idaapi [as 別名]
# 或者: from idaapi import o_imm [as 別名]
def op_dec(ea, opnum):
    '''Set the type for operand `opnum` belonging to the instruction at `ea` to decimal and return it.'''
    t = idaapi.dec_flag()
    ok, signed = idaapi.set_op_type(ea, t, opnum), idaapi.is_invsign(ea, database.type.flags(ea), opnum)
    if not ok:
        raise E.DisassemblerError(u"{:s}.op_dec({:#x}, {:d}) : Unable to set the type of operand {:d} to decimal.".format(__name__, ea, opnum, opnum))

    # Extract the operand's op_t and its maximum value, as we'll use this to
    # transform the value if necessary.
    res, max = operand(ea, opnum), 2 ** op_bits(ea, opnum)

    # If this is an immediate value, then we can treat it normally.
    if res.type in {idaapi.o_imm}:
        integer = res.value & (max - 1)
        return 0 if integer == 0 else (integer - max) if signed else integer

    # If the signed-flag is set in our operand, then convert it into its actual
    # signed value.
    maximum = math.trunc(2 ** math.ceil(math.log(idaapi.BADADDR, 2)))
    integer = (res.addr - maximum) if res.addr & (maximum // 2) else res.addr

    # Now we can return the value transformed if the operand has an inverted sign
    return 0 if integer == 0 else (maximum + integer) if signed and integer < 0 else (integer - maximum) if signed else integer 

# 需要導入模塊: import idaapi [as 別名]
# 或者: from idaapi import o_imm [as 別名]
def op_chr(ea, opnum):
    '''Set the type for operand `opnum` belonging to the instruction at `ea` to a character and return it.'''
    t = idaapi.char_flag()
    ok, signed = idaapi.set_op_type(ea, t, opnum), idaapi.is_invsign(ea, database.type.flags(ea), opnum)
    if not ok:
        raise E.DisassemblerError(u"{:s}.op_chr({:#x}, {:d}) : Unable to set the type of operand {:d} to a character.".format(__name__, ea, opnum, opnum))

    # Extract the operand's op_t and its maximum value, as we'll use this to
    # transform the value if necessary.
    res, max = operand(ea, opnum), 2 ** op_bits(ea, opnum)

    # If this is an immediate value, then we can treat it normally.
    if res.type in {idaapi.o_imm}:
        integer = res.value & (max - 1)
        result = 0 if integer == 0 else (integer - max) if signed else integer

    # If the signed-flag is set in our operand, then convert it into its actual
    # signed value.
    else:
        maximum = math.trunc(2 ** math.ceil(math.log(idaapi.BADADDR, 2)))
        integer = (res.addr - maximum) if res.addr & (maximum // 2) else res.addr

        # Now we can use the value transformed if the operand has an inverted sign
        result = 0 if integer == 0 else (maximum + integer) if signed and integer < 0 else (integer - maximum) if signed else integer

    # There's no such thing as a signed character, so if we do get a signed
    # value back from our above logic, then we need to figure out its absolute
    # value so we can return it properly.
    absolute = abs(result)

    # IDA actually returns integers larger than a byte as a string, so we'll
    # first chunk our integer into octets.
    octets = []
    while absolute > 0:
        octets.append(absolute & 0xff)
        absolute //= 0x100

    # Last thing to do is to join each octet together back into some bytes
    return bytes().join(map(six.int2byte, reversed(bytearray(octets)))) 

# 需要導入模塊: import idaapi [as 別名]
# 或者: from idaapi import o_imm [as 別名]
def op_flt(ea, opnum):
    '''Set the type for operand `opnum` belonging to the instruction at `ea` to floating-point and return it.'''
    t = idaapi.flt_flag()

    # Explicitly set the operand type using idaapi.
    ok = idaapi.set_op_type(ea, t, opnum)
    if not ok:
        raise E.DisassemblerError(u"{:s}.op_flt({:#x}, {:d}) : Unable to set the type of operand {:d} to floating-point.".format(__name__, ea, opnum, opnum))

    # Read the number of bits for the operand so we can figure out how to properly
    # decode this integer.
    res, bits = operand(ea, opnum), op_bits(ea, opnum)
    integer = res.value if res.type in {idaapi.o_imm} else res.addr

    # Figure out which floating-point components to use for decoding
    if bits == 64:
        fraction, exponent, sign = 52, 11, 1

    elif bits == 32:
        fraction, exponent, sign = 23, 8, 1

    elif bits == 16:
        fraction, exponent, sign = 10, 5, 1

    # If we couldn't find a valid encoding, then raise an exception.
    else:
        raise E.UnsupportedCapability(u"{:s}.op_flt({:#x}, {:d}) : Unable to decode operand {:d} for instruction due to an unsupported number of bits ({:d}).".format(__name__, ea, opnum, opnum, bits))

    # Now we can decode the floating-point operand and return it.
    try:
        res = utils.float_of_integer(integer, fraction, exponent, sign)

    # If an exception was raised, then re-raise it with our parameters prefixed.
    except ValueError as message:
        raise ValueError(u"{:s}.op_flt({:#x}, {:d}) : {!s}".format(__name__, ea, opnum, message))

    # That's all, folks.
    return res 

# 需要導入模塊: import idaapi [as 別名]
# 或者: from idaapi import o_imm [as 別名]
def immediate(ea, op):
        '''Operand type decoder for ``idaapi.o_imm`` which returns an immediate integer.'''
        get_dtype_attribute = operator.attrgetter('dtyp' if idaapi.__version__ < 7.0 else 'dtype')
        get_dtype_size = idaapi.get_dtyp_size if idaapi.__version__ < 7.0 else idaapi.get_dtype_size

        if op.type in {idaapi.o_imm, idaapi.o_phrase}:
            bits = 8 * get_dtype_size(get_dtype_attribute(op))

            # figure out the sign flag
            sf, res = 2 ** (bits - 1), op.value

            # if op.value has its sign inverted, then signify it otherwise just use it
            return -2 ** bits + res if interface.node.alt_opinverted(ea, op.n) else res & (2 ** bits - 1)
        optype = "{:s}({:d})".format('idaapi.o_imm', idaapi.o_imm)
        raise E.InvalidTypeOrValueError(u"{:s}.immediate({:#x}, {!r}) : Expected operand type `{:s}` but operand type {:d} was received.".format('.'.join((__name__, 'operand_types')), ea, op, optype, op.type)) 

# 需要導入模塊: import idaapi [as 別名]
# 或者: from idaapi import o_imm [as 別名]
def get_opcodes(addr, strict):
    """Get current bytes of the instruction pointed at addr.

    Args:
      addr: address of the current instruction
      strict: be more restrictive when applying wildcards (True) or not (False)

    Returns:
      String: hex-encoded representation of the bytes obtained at addr
    """

    if strict:
      offsets_types = {idaapi.o_far, idaapi.o_mem, idaapi.o_imm}
    else:
      offsets_types = {idaapi.o_far, idaapi.o_mem}

    pattern = ''
    mnem = idautils.DecodeInstruction(addr)

    if mnem is not None:
      op1_type = mnem.Op1.type
      op2_type = mnem.Op2.type

      logging.debug(
          '[VTGREP] Instruction: %s  [%d, %d, %d]',
          idc.generate_disasm_line(addr, 0),
          mnem.itype,
          op1_type,
          op2_type
          )

      inst_len = idc.get_item_size(addr)
      drefs = [x for x in idautils.DataRefsFrom(addr)]

      # Checks if any operand constains a memory address
      if (drefs and
          ((op1_type == idaapi.o_imm) or (op2_type == idaapi.o_imm)) or
          op1_type in offsets_types or op2_type in offsets_types):
        pattern = Disassembler.wildcard_instruction(addr)
      # Checks if the instruction is a CALL (near or far) or
      # if it's a JMP (excluding near jumps)
      else:
        if ((mnem.itype == idaapi.NN_call) or
            (mnem.itype == idaapi.NN_jmp and op1_type != idaapi.o_near)):
          pattern = Disassembler.wildcard_instruction(addr)
        # In any other case, concatenate the raw bytes to the current string
        else:
          pattern = binascii.hexlify(idc.get_bytes(addr, inst_len))
          pattern = pattern.decode('utf-8')
      return pattern
    else: return 0 

# 需要導入模塊: import idaapi [as 別名]
# 或者: from idaapi import o_imm [as 別名]
def rename_constant(arg_ea, fct_name, arg_name, arg_enums):
    """ Rename constants to values from standard enumerations. """
    instruction = idc.GetMnem(arg_ea)
    if instruction == 'push':
        op_num = 0
    elif instruction == 'mov':
        op_num = 1
    else:
        raise RenamingException('Constant: unhandled instruction ' +
                                instruction)

    op_val = idc.GetOperandValue(arg_ea, op_num)
    # NULL
    if op_val == 0:
        targetid = idc.GetConstByName('NULL_{}_{}'.format(arg_name, fct_name))
        serial = 0
        enumid = idc.GetEnum(NULL_ENUM_NAME)
        constid = idc.GetConstEx(enumid, 0, serial, -1)
        while constid != idaapi.BADADDR:
            if constid == targetid:
                idc.OpEnumEx(arg_ea, op_num, enumid, serial)
                return
            serial = serial + 1
            constid = idc.GetConstEx(enumid, 0, serial, -1)

    # All other constants
    op_type = idc.GetOpType(arg_ea, op_num)
    if op_type == idaapi.o_imm:
        # only one choice
        if len(arg_enums) == 1:
            enumid = idc.GetEnum(arg_enums[0])
            idc.OpEnumEx(arg_ea, op_num, enumid, 0)
            return

        for enum in arg_enums:
            enumid = idc.GetEnum(enum)
            constid = get_constant_id(enumid, op_val)
            if constid == idaapi.BADADDR:
                # Not in this enum
                continue
            else:
                # Found the right enum
                idc.OpEnumEx(arg_ea, op_num, enumid, 0)
                return