本文整理匯總了Python中fixtures.MonkeyPatch方法的典型用法代碼示例。如果您正苦於以下問題:Python fixtures.MonkeyPatch方法的具體用法?Python fixtures.MonkeyPatch怎麽用?Python fixtures.MonkeyPatch使用的例子?那麽, 這裏精選的方法代碼示例或許可以為您提供幫助。您也可以進一步了解該方法所在類fixtures
的用法示例。
在下文中一共展示了fixtures.MonkeyPatch方法的15個代碼示例,這些例子默認根據受歡迎程度排序。您可以為喜歡或者感覺有用的代碼點讚,您的評價將有助於係統推薦出更棒的Python代碼示例。
示例1: setUp
# 需要導入模塊: import fixtures [as 別名]
# 或者: from fixtures import MonkeyPatch [as 別名]
def setUp(self):
"Run before each test method to initialize test environment."
super(TestCase, self).setUp()
test_timeout = os.environ.get('OS_TEST_TIMEOUT', 0)
try:
test_timeout = int(test_timeout)
except ValueError:
# If timeout value is invalid do not set a timeout.
test_timeout = 0
if test_timeout > 0:
self.useFixture(fixtures.Timeout(test_timeout, gentle=True))
self.useFixture(fixtures.NestedTempfile())
self.useFixture(fixtures.TempHomeDir())
if os.environ.get('OS_STDOUT_CAPTURE') in _TRUE_VALUES:
stdout = self.useFixture(fixtures.StringStream('stdout')).stream
self.useFixture(fixtures.MonkeyPatch('sys.stdout', stdout))
if os.environ.get('OS_STDERR_CAPTURE') in _TRUE_VALUES:
stderr = self.useFixture(fixtures.StringStream('stderr')).stream
self.useFixture(fixtures.MonkeyPatch('sys.stderr', stderr))
self.log_fixture = self.useFixture(fixtures.FakeLogger())
示例2: setUp
# 需要導入模塊: import fixtures [as 別名]
# 或者: from fixtures import MonkeyPatch [as 別名]
def setUp(self):
"""Run before each test method to initialize test environment."""
super(TestCase, self).setUp()
test_timeout = os.environ.get('OS_TEST_TIMEOUT', 0)
try:
test_timeout = int(test_timeout)
except ValueError:
# If timeout value is invalid do not set a timeout.
test_timeout = 0
if test_timeout > 0:
self.useFixture(fixtures.Timeout(test_timeout, gentle=True))
self.useFixture(fixtures.NestedTempfile())
self.useFixture(fixtures.TempHomeDir())
if os.environ.get('OS_STDOUT_CAPTURE') in _TRUE_VALUES:
stdout = self.useFixture(fixtures.StringStream('stdout')).stream
self.useFixture(fixtures.MonkeyPatch('sys.stdout', stdout))
if os.environ.get('OS_STDERR_CAPTURE') in _TRUE_VALUES:
stderr = self.useFixture(fixtures.StringStream('stderr')).stream
self.useFixture(fixtures.MonkeyPatch('sys.stderr', stderr))
self.log_fixture = self.useFixture(fixtures.FakeLogger())
示例3: setUp
# 需要導入模塊: import fixtures [as 別名]
# 或者: from fixtures import MonkeyPatch [as 別名]
def setUp(self):
self.LOG.info('Starting: %s', self._testMethodName)
super(TestCase, self).setUp()
self.client = client.BarbicanClient()
stdout_capture = os.environ.get('OS_STDOUT_CAPTURE')
stderr_capture = os.environ.get('OS_STDERR_CAPTURE')
log_capture = os.environ.get('OS_LOG_CAPTURE')
if ((stdout_capture and stdout_capture.lower() == 'true') or
stdout_capture == '1'):
stdout = self.useFixture(fixtures.StringStream('stdout')).stream
self.useFixture(fixtures.MonkeyPatch('sys.stdout', stdout))
if ((stderr_capture and stderr_capture.lower() == 'true') or
stderr_capture == '1'):
stderr = self.useFixture(fixtures.StringStream('stderr')).stream
self.useFixture(fixtures.MonkeyPatch('sys.stderr', stderr))
if ((log_capture and log_capture.lower() == 'true') or
log_capture == '1'):
self.useFixture(fixtures.LoggerFixture(nuke_handlers=False,
format=self.log_format,
level=logging.DEBUG))
示例4: setUp
# 需要導入模塊: import fixtures [as 別名]
# 或者: from fixtures import MonkeyPatch [as 別名]
def setUp(self):
"""Run before each test method to initialize test environment."""
super(TestCase, self).setUp()
test_timeout = os.environ.get('OS_TEST_TIMEOUT', 0)
try:
test_timeout = int(test_timeout)
except ValueError:
# If timeout value is invalid do not set a timeout.
test_timeout = 0
if test_timeout > 0:
self.useFixture(fixtures.Timeout(test_timeout, gentle=True))
self.useFixture(fixtures.NestedTempfile())
self.temp_homedir = self.useFixture(fixtures.TempHomeDir()).path
if os.environ.get('OS_STDOUT_CAPTURE') in _TRUE_VALUES:
stdout = self.useFixture(fixtures.StringStream('stdout')).stream
self.useFixture(fixtures.MonkeyPatch('sys.stdout', stdout))
if os.environ.get('OS_STDERR_CAPTURE') in _TRUE_VALUES:
stderr = self.useFixture(fixtures.StringStream('stderr')).stream
self.useFixture(fixtures.MonkeyPatch('sys.stderr', stderr))
self.log_fixture = self.useFixture(fixtures.FakeLogger())
示例5: setUp
# 需要導入模塊: import fixtures [as 別名]
# 或者: from fixtures import MonkeyPatch [as 別名]
def setUp(self):
super(GetSocketTestCase, self).setUp()
self.useFixture(fixtures.MonkeyPatch(
"senlin.api.common.wsgi.get_bind_addr",
lambda x, y: ('192.168.0.13', 1234)))
addr_info_list = [(2, 1, 6, '', ('192.168.0.13', 80)),
(2, 2, 17, '', ('192.168.0.13', 80)),
(2, 3, 0, '', ('192.168.0.13', 80))]
self.useFixture(fixtures.MonkeyPatch(
"senlin.api.common.wsgi.socket.getaddrinfo",
lambda *x: addr_info_list))
self.useFixture(fixtures.MonkeyPatch(
"senlin.api.common.wsgi.time.time",
mock.Mock(side_effect=[0, 1, 5, 10, 20, 35])))
wsgi.cfg.CONF.senlin_api.cert_file = '/etc/ssl/cert'
wsgi.cfg.CONF.senlin_api.key_file = '/etc/ssl/key'
wsgi.cfg.CONF.senlin_api.ca_file = '/etc/ssl/ca_cert'
wsgi.cfg.CONF.senlin_api.tcp_keepidle = 600
示例6: test_correct_configure_socket
# 需要導入模塊: import fixtures [as 別名]
# 或者: from fixtures import MonkeyPatch [as 別名]
def test_correct_configure_socket(self):
mock_socket = mock.Mock()
self.useFixture(fixtures.MonkeyPatch(
'senlin.api.common.wsgi.ssl.wrap_socket',
mock_socket))
self.useFixture(fixtures.MonkeyPatch(
'senlin.api.common.wsgi.eventlet.listen',
lambda *x, **y: mock_socket))
server = wsgi.Server(name='senlin-api', conf=cfg.CONF.senlin_api)
server.default_port = 1234
server.configure_socket()
self.assertIn(mock.call.setsockopt(socket.SOL_SOCKET,
socket.SO_REUSEADDR, 1),
mock_socket.mock_calls)
self.assertIn(mock.call.setsockopt(socket.SOL_SOCKET,
socket.SO_KEEPALIVE, 1),
mock_socket.mock_calls)
if hasattr(socket, 'TCP_KEEPIDLE'):
self.assertIn(mock.call().setsockopt(
socket.IPPROTO_TCP,
socket.TCP_KEEPIDLE,
wsgi.cfg.CONF.senlin_api.tcp_keepidle), mock_socket.mock_calls)
示例7: setUp
# 需要導入模塊: import fixtures [as 別名]
# 或者: from fixtures import MonkeyPatch [as 別名]
def setUp(self):
super(SenlinTestCase, self).setUp()
self.setup_logging()
service.ENABLE_SLEEP = False
self.useFixture(fixtures.MonkeyPatch(
'senlin.common.exception._FATAL_EXCEPTION_FORMAT_ERRORS',
True))
def enable_sleep():
service.ENABLE_SLEEP = True
self.addCleanup(enable_sleep)
self.addCleanup(cfg.CONF.reset)
messaging.setup("fake://", optional=True)
self.addCleanup(messaging.cleanup)
utils.setup_dummy_db()
self.addCleanup(utils.reset_dummy_db)
示例8: setUp
# 需要導入模塊: import fixtures [as 別名]
# 或者: from fixtures import MonkeyPatch [as 別名]
def setUp(self):
super(TestCase, self).setUp()
self.useFixture(fixtures.NestedTempfile())
conf = copy.deepcopy(USER_CONF)
tdir = self.useFixture(fixtures.TempDir())
conf['cache']['path'] = tdir.path
self.cloud_yaml = _write_yaml(conf)
self.secure_yaml = _write_yaml(SECURE_CONF)
self.vendor_yaml = _write_yaml(VENDOR_CONF)
self.no_yaml = _write_yaml(NO_CONF)
self.useFixture(fixtures.MonkeyPatch(
'os_client_config.__version__', '1.2.3'))
self.useFixture(fixtures.MonkeyPatch(
'openstack.version.__version__', '3.4.5'))
# Isolate the test runs from the environment
# Do this as two loops because you can't modify the dict in a loop
# over the dict in 3.4
keys_to_isolate = []
for env in os.environ.keys():
if env.startswith('OS_'):
keys_to_isolate.append(env)
for env in keys_to_isolate:
self.useFixture(fixtures.EnvironmentVariable(env))
示例9: test_write_would_block_too_many_times
# 需要導入模塊: import fixtures [as 別名]
# 或者: from fixtures import MonkeyPatch [as 別名]
def test_write_would_block_too_many_times(self):
self.useFixture(fixtures.MonkeyPatch(
'ironic_inspector.pxe_filter.dnsmasq._EXCLUSIVE_WRITE_ATTEMPTS',
1))
err = IOError('Oops!')
err.errno = errno.EWOULDBLOCK
self.mock_fcntl.side_effect = [err, None]
wrote = dnsmasq._exclusive_write_or_pass(self.path, self.buf)
self.assertFalse(wrote)
self.mock_open.assert_called_once_with(self.path, 'w', 1)
self.mock_fcntl.assert_has_calls(
[self.fcntl_lock_call, self.fcntl_unlock_call])
self.mock_fd.write.assert_not_called()
retry_log_call = mock.call('%s locked; will try again (later)',
self.path)
failed_log_call = mock.call(
'Failed to write the exclusively-locked path: %(path)s for '
'%(attempts)s times', {
'attempts': dnsmasq._EXCLUSIVE_WRITE_ATTEMPTS,
'path': self.path
})
self.mock_log.assert_has_calls([retry_log_call, failed_log_call])
self.mock_sleep.assert_called_once_with(
dnsmasq._EXCLUSIVE_WRITE_ATTEMPTS_DELAY)
示例10: setUp
# 需要導入模塊: import fixtures [as 別名]
# 或者: from fixtures import MonkeyPatch [as 別名]
def setUp(self):
super(PrefixLazyTranslation, self).setUp()
self.useFixture(ToggleLazy(True))
self.useFixture(fixtures.MonkeyPatch(
'oslo_i18n._gettextutils.get_available_languages',
lambda *x, **y: self.languages))
self.useFixture(fixtures.MonkeyPatch(
'oslo_i18n.get_available_languages',
lambda *x, **y: self.languages))
self.useFixture(fixtures.MonkeyPatch('gettext.translation',
_prefix_translations))
self.useFixture(fixtures.MonkeyPatch('locale.getdefaultlocale',
lambda *x, **y: self.locale))
示例11: setUp
# 需要導入模塊: import fixtures [as 別名]
# 或者: from fixtures import MonkeyPatch [as 別名]
def setUp(self):
super(CaptureOutput, self).setUp()
self._stdout_fixture = fixtures.StringStream('stdout')
self.stdout = self.useFixture(self._stdout_fixture).stream
self.useFixture(fixtures.MonkeyPatch('sys.stdout', self.stdout))
self._stderr_fixture = fixtures.StringStream('stderr')
self.stderr = self.useFixture(self._stderr_fixture).stream
self.useFixture(fixtures.MonkeyPatch('sys.stderr', self.stderr))
self._logs_fixture = fixtures.StringStream('logs')
self.logs = self.useFixture(self._logs_fixture).stream
self.useFixture(fixtures.MonkeyPatch(
'daiquiri.output.STDERR', daiquiri.output.Stream(self.logs)))
示例12: stub_out
# 需要導入模塊: import fixtures [as 別名]
# 或者: from fixtures import MonkeyPatch [as 別名]
def stub_out(self, old, new):
"""Replace a function for the duration of the test.
Use the monkey patch fixture to replace a function for the
duration of a test. Useful when you want to provide fake
methods instead of mocks during testing.
This should be used instead of self.stubs.Set (which is based
on mox) going forward.
"""
self.useFixture(fixtures.MonkeyPatch(old, new))
示例13: setUp
# 需要導入模塊: import fixtures [as 別名]
# 或者: from fixtures import MonkeyPatch [as 別名]
def setUp(self):
super(BaseTestCase, self).setUp()
if not self.setUpClassCalled:
raise RuntimeError("setUpClass does not calls the super's"
"setUpClass in the "
+ self.__class__.__name__)
test_timeout = os.environ.get('OS_TEST_TIMEOUT', 0)
try:
test_timeout = int(test_timeout)
except ValueError:
test_timeout = 0
if test_timeout > 0:
self.useFixture(fixtures.Timeout(test_timeout, gentle=True))
if (os.environ.get('OS_STDOUT_CAPTURE') == 'True' or
os.environ.get('OS_STDOUT_CAPTURE') == '1'):
stdout = self.useFixture(fixtures.StringStream('stdout')).stream
self.useFixture(fixtures.MonkeyPatch('sys.stdout', stdout))
if (os.environ.get('OS_STDERR_CAPTURE') == 'True' or
os.environ.get('OS_STDERR_CAPTURE') == '1'):
stderr = self.useFixture(fixtures.StringStream('stderr')).stream
self.useFixture(fixtures.MonkeyPatch('sys.stderr', stderr))
if (os.environ.get('OS_LOG_CAPTURE') != 'False' and
os.environ.get('OS_LOG_CAPTURE') != '0'):
self.useFixture(fixtures.LoggerFixture(nuke_handlers=False,
format=self.log_format,
level=None))
示例14: setUp
# 需要導入模塊: import fixtures [as 別名]
# 或者: from fixtures import MonkeyPatch [as 別名]
def setUp(self):
"""Run before each test method to initialize test environment."""
super(TestCase, self).setUp()
self.stubbed_mapped_nics = {}
def dummy_mapped_nics(nic_mapping=None):
return self.stubbed_mapped_nics
if self.stub_mapped_nics:
self.stub_out('os_net_config.objects.mapped_nics',
dummy_mapped_nics)
test_timeout = os.environ.get('OS_TEST_TIMEOUT', 0)
try:
test_timeout = int(test_timeout)
except ValueError:
# If timeout value is invalid do not set a timeout.
test_timeout = 0
if test_timeout > 0:
self.useFixture(fixtures.Timeout(test_timeout, gentle=True))
self.useFixture(fixtures.NestedTempfile())
self.useFixture(fixtures.TempHomeDir())
if os.environ.get('OS_STDOUT_CAPTURE') in _TRUE_VALUES:
stdout = self.useFixture(fixtures.StringStream('stdout')).stream
self.useFixture(fixtures.MonkeyPatch('sys.stdout', stdout))
if os.environ.get('OS_STDERR_CAPTURE') in _TRUE_VALUES:
stderr = self.useFixture(fixtures.StringStream('stderr')).stream
self.useFixture(fixtures.MonkeyPatch('sys.stderr', stderr))
self.log_fixture = self.useFixture(fixtures.FakeLogger())
示例15: stub_out
# 需要導入模塊: import fixtures [as 別名]
# 或者: from fixtures import MonkeyPatch [as 別名]
def stub_out(self, old, new):
"""Replace a function for the duration of the test.
Use the monkey patch fixture to replace a function for the
duration of a test. Useful when you want to provide fake
methods instead of mocks during testing.
This should be used instead of set.stubs.Set (which is based
on mox) going forward.
"""
self.useFixture(fixtures.MonkeyPatch(old, new))