Python tester.k3方法代碼示例

本文整理匯總了Python中ethereum.tester.k3方法的典型用法代碼示例。如果您正苦於以下問題：Python tester.k3方法的具體用法？Python tester.k3怎麽用？Python tester.k3使用的例子？那麽, 這裏精選的方法代碼示例或許可以為您提供幫助。您也可以進一步了解該方法所在類ethereum.tester的用法示例。

在下文中一共展示了tester.k3方法的8個代碼示例，這些例子默認根據受歡迎程度排序。您可以為喜歡或者感覺有用的代碼點讚，您的評價將有助於係統推薦出更棒的Python代碼示例。

示例1: test_close_only_participant_can_close

# 需要導入模塊: from ethereum import tester [as 別名]
# 或者: from ethereum.tester import k3 [as 別名]
def test_close_only_participant_can_close(tester_nettingcontracts):
    """ Only the participants may call close. """
    # Third party close is discussed on issue #182
    _, _, nettingchannel = tester_nettingcontracts[0]

    nonparticipant_key = tester.k3
    with pytest.raises(TransactionFailed):
        nettingchannel.close(sender=nonparticipant_key)

開發者ID:raiden-network，項目名稱:raiden，代碼行數:10，代碼來源:test_close.py

示例2: test_crowdfund

# 需要導入模塊: from ethereum import tester [as 別名]
# 或者: from ethereum.tester import k3 [as 別名]
def test_crowdfund():
    s = tester.state()
    c = s.abi_contract(crowdfund_code)
    # Create a campaign with id 100
    c.create_campaign(100, 45, 100000, 2)
    # Create a campaign with id 200
    c.create_campaign(200, 48, 100000, 2)
    # Make some contributions
    c.contribute(100, value=1, sender=tester.k1)
    assert 1 == c.progress_report(100)
    c.contribute(200, value=30000, sender=tester.k2)
    c.contribute(100, value=59049, sender=tester.k3)
    assert 59050 == c.progress_report(100)
    c.contribute(200, value=70001, sender=tester.k4)
    # Expect the 100001 units to be delivered to the destination
    # account for campaign 2
    assert 100001 == s.block.get_balance(utils.int_to_addr(48))
    mida1 = s.block.get_balance(tester.a1)
    mida3 = s.block.get_balance(tester.a3)
    # Mine 5 blocks to expire the campaign
    s.mine(5)
    # Ping the campaign after expiry
    c.contribute(100, value=1)
    # Expect refunds
    assert mida1 + 1 == s.block.get_balance(tester.a1)
    assert mida3 + 59049 == s.block.get_balance(tester.a3)

開發者ID:ethereumproject，項目名稱:pyethereum，代碼行數:28，代碼來源:test_contracts.py

示例3: test_full_scenario

# 需要導入模塊: from ethereum import tester [as 別名]
# 或者: from ethereum.tester import k3 [as 別名]
def test_full_scenario(self):
        self.init_market()

        # Place orders
        self.c1.send(self.m.address, 1000, sender=tester.k0)
        self.m.buy(1200, sender=tester.k0)

        self.c1.send(self.m.address, 1000, sender=tester.k1)
        self.m.buy(1400, sender=tester.k1)

        self.c2.send(self.m.address, 1000000, sender=tester.k2)
        self.m.sell(800, sender=tester.k2)

        self.c2.send(self.m.address, 1000000, sender=tester.k3)
        self.m.sell(600, sender=tester.k3)

        print("Orders placed")

        # Next epoch and ping
        self.s.mine(100)
        print("Mined 100")
        assert self.m.tick() == 1
        print("Updating")

        # Check
        assert self.c2.balance(tester.a0) == 800000
        assert self.c2.balance(tester.a1) == 600000
        assert self.c1.balance(tester.a2) == 833
        assert self.c1.balance(tester.a3) == 714
        print("Balance checks passed")

        assert self.m.volume() == 1547
        assert self.m.price() == 1000
        assert self.c1.balance(self.m.address) == 453
        assert self.c2.balance(self.m.address) == 600000
        assert self.buy_heap.size() == 0
        assert self.sell_heap.size() == 0

開發者ID:beaugunderson，項目名稱:serplint，代碼行數:39，代碼來源:test_market.py

示例4: test_create

# 需要導入模塊: from ethereum import tester [as 別名]
# 或者: from ethereum.tester import k3 [as 別名]
def test_create(self):
        addr, _ = self.deploy_contract(urandom(20), 1, 2)
        self.state.mine(1)
        v = 13 * denoms.ether + 13
        self.c.create(sender=tester.k3, value=v)
        assert self.c.balanceOf(tester.a3) == v * self.c.tokenCreationRate()

開發者ID:golemfactory，項目名稱:golem-crowdfunding，代碼行數:8，代碼來源:test_gnt.py

示例5: test_create_raw

# 需要導入模塊: from ethereum import tester [as 別名]
# 或者: from ethereum.tester import k3 [as 別名]
def test_create_raw(self):
        addr, _ = self.deploy_contract(urandom(20), 1, 2)
        self.state.mine(1)
        v = 13 * denoms.ether + 13
        create_fn_id = decode_hex('efc81a8c')
        self.state.send(tester.k3, addr, value=v, evmdata=create_fn_id)
        assert self.c.balanceOf(tester.a3) == v * self.c.tokenCreationRate()

開發者ID:golemfactory，項目名稱:golem-crowdfunding，代碼行數:9，代碼來源:test_gnt.py

示例6: test_no_fallback_fn

# 需要導入模塊: from ethereum import tester [as 別名]
# 或者: from ethereum.tester import k3 [as 別名]
def test_no_fallback_fn(self):
        addr, _ = self.deploy_contract(urandom(20), 1, 2)
        self.state.mine(1)
        v = 13 * denoms.ether + 13
        with self.assertRaises(TransactionFailed):
            self.state.send(tester.k3, addr, value=v)
        assert self.c.balanceOf(tester.a3) == 0

開發者ID:golemfactory，項目名稱:golem-crowdfunding，代碼行數:9，代碼來源:test_gnt.py

示例7: test_send_raw_data_no_value

# 需要導入模塊: from ethereum import tester [as 別名]
# 或者: from ethereum.tester import k3 [as 別名]
def test_send_raw_data_no_value(self):
        random_data = urandom(4)
        print("RANDOM DATA: {}".format(random_data.encode('hex')))
        addr, _ = self.deploy_contract(tester.a9, 7, 9)

        assert self.c.totalSupply() == 0
        assert self.contract_balance() == 0

        with self.assertRaises(TransactionFailed):
            self.state.send(tester.k3, addr, value=0, evmdata=random_data)
        assert self.c.totalSupply() == 0
        assert self.contract_balance() == 0

        self.state.mine(7)
        assert self.is_funding_active()
        with self.assertRaises(TransactionFailed):
            self.state.send(tester.k3, addr, value=0, evmdata=random_data)
        assert self.c.totalSupply() == 0
        assert self.contract_balance() == 0

        self.state.mine(3)
        assert not self.is_funding_active()
        with self.assertRaises(TransactionFailed):
            self.state.send(tester.k3, addr, value=0, evmdata=random_data)
        assert self.c.totalSupply() == 0
        assert self.contract_balance() == 0

開發者ID:golemfactory，項目名稱:golem-crowdfunding，代碼行數:28，代碼來源:test_gnt.py

示例8: test_send_raw_data_and_value

# 需要導入模塊: from ethereum import tester [as 別名]
# 或者: from ethereum.tester import k3 [as 別名]
def test_send_raw_data_and_value(self):
        random_data = urandom(4)
        print("RANDOM DATA: {}".format(random_data.encode('hex')))
        addr, _ = self.deploy_contract(tester.a9, 7, 9)

        max_value = self.c.tokenCreationCap() / self.c.tokenCreationRate()
        random_value = randint(0, max_value)
        print("RANDOM VALUE: {}".format(random_value))

        assert self.c.totalSupply() == 0
        assert self.contract_balance() == 0

        with self.assertRaises(TransactionFailed):
            self.state.send(tester.k3, addr, random_value, evmdata=random_data)
        assert self.c.totalSupply() == 0
        assert self.contract_balance() == 0

        self.state.mine(7)
        assert self.is_funding_active()
        with self.assertRaises(TransactionFailed):
            self.state.send(tester.k3, addr, random_value, evmdata=random_data)
        assert self.c.totalSupply() == 0
        assert self.contract_balance() == 0

        self.state.mine(3)
        assert not self.is_funding_active()
        with self.assertRaises(TransactionFailed):
            self.state.send(tester.k4, addr, random_value, evmdata=random_data)
        assert self.c.totalSupply() == 0
        assert self.contract_balance() == 0

開發者ID:golemfactory，項目名稱:golem-crowdfunding，代碼行數:32，代碼來源:test_gnt.py

注：本文中的ethereum.tester.k3方法示例由純淨天空整理自Github/MSDocs等開源代碼及文檔管理平台，相關代碼片段篩選自各路編程大神貢獻的開源項目，源碼版權歸原作者所有，傳播和使用請參考對應項目的License；未經允許，請勿轉載。