本文整理匯總了Python中datetime.time.time方法的典型用法代碼示例。如果您正苦於以下問題:Python time.time方法的具體用法?Python time.time怎麽用?Python time.time使用的例子?那麽, 這裏精選的方法代碼示例或許可以為您提供幫助。您也可以進一步了解該方法所在類datetime.time
的用法示例。
在下文中一共展示了time.time方法的15個代碼示例,這些例子默認根據受歡迎程度排序。您可以為喜歡或者感覺有用的代碼點讚,您的評價將有助於係統推薦出更棒的Python代碼示例。
示例1: to_param_put
# 需要導入模塊: from datetime import time [as 別名]
# 或者: from datetime.time import time [as 別名]
def to_param_put(self):
"""
convert dev_info to ParamPutRequest message.
:rtype : ParamPutRequest
"""
req = ParamPutRequest(self.station_no)
req.rec_interval = self.rec_interval or time(0, 0, 30)
req.upper_limit = self.upper_limit
req.lower_limit = self.lower_limit
req.update_station_no = self.station_no
req.stop_button = self.stop_button
req.delay = self.delay
req.tone_set = self.tone_set
req.alarm = self.alarm
req.temp_unit = self.temp_unit
req.temp_calibration = self.temp_calibration
req.humi_upper_limit = self.humi_upper_limit
req.humi_lower_limit = self.humi_lower_limit
req.humi_calibration = self.humi_calibration
return req
示例2: __init__
# 需要導入模塊: from datetime import time [as 別名]
# 或者: from datetime.time import time [as 別名]
def __init__(self, target_station_no):
self.target_station_no = target_station_no
self.rec_interval = time(0, 10, 0)
self.upper_limit = 60.0
self.lower_limit = -30.0
self.update_station_no = 1
self.stop_button = StopButton.DISABLE
self.delay = 0
self.tone_set = ToneSet.NONE
self.alarm = AlarmSetting.NONE
self.temp_unit = TemperatureUnit.C
self.temp_calibration = 0
self.humi_upper_limit = 0
self.humi_lower_limit = 0
self.humi_calibration = 0
示例3: test_pickling_subclass
# 需要導入模塊: from datetime import time [as 別名]
# 或者: from datetime.time import time [as 別名]
def test_pickling_subclass(self):
# Make sure we can pickle/unpickle an instance of a subclass.
offset = timedelta(minutes=-300)
orig = PicklableFixedOffset(offset, 'cookie')
self.assertIsInstance(orig, tzinfo)
self.assertTrue(type(orig) is PicklableFixedOffset)
self.assertEqual(orig.utcoffset(None), offset)
self.assertEqual(orig.tzname(None), 'cookie')
for pickler, unpickler, proto in pickle_choices:
green = pickler.dumps(orig, proto)
derived = unpickler.loads(green)
self.assertIsInstance(derived, tzinfo)
self.assertTrue(type(derived) is PicklableFixedOffset)
self.assertEqual(derived.utcoffset(None), offset)
self.assertEqual(derived.tzname(None), 'cookie')
#############################################################################
# Base class for testing a particular aspect of timedelta, time, date and
# datetime comparisons.
示例4: test_extreme_ordinals
# 需要導入模塊: from datetime import time [as 別名]
# 或者: from datetime.time import time [as 別名]
def test_extreme_ordinals(self):
a = self.theclass.min
a = self.theclass(a.year, a.month, a.day) # get rid of time parts
aord = a.toordinal()
b = a.fromordinal(aord)
self.assertEqual(a, b)
self.assertRaises(ValueError, lambda: a.fromordinal(aord - 1))
b = a + timedelta(days=1)
self.assertEqual(b.toordinal(), aord + 1)
self.assertEqual(b, self.theclass.fromordinal(aord + 1))
a = self.theclass.max
a = self.theclass(a.year, a.month, a.day) # get rid of time parts
aord = a.toordinal()
b = a.fromordinal(aord)
self.assertEqual(a, b)
self.assertRaises(ValueError, lambda: a.fromordinal(aord + 1))
b = a - timedelta(days=1)
self.assertEqual(b.toordinal(), aord - 1)
self.assertEqual(b, self.theclass.fromordinal(aord - 1))
示例5: test_backdoor_resistance
# 需要導入模塊: from datetime import time [as 別名]
# 或者: from datetime.time import time [as 別名]
def test_backdoor_resistance(self):
# For fast unpickling, the constructor accepts a pickle string.
# This is a low-overhead backdoor. A user can (by intent or
# mistake) pass a string directly, which (if it's the right length)
# will get treated like a pickle, and bypass the normal sanity
# checks in the constructor. This can create insane objects.
# The constructor doesn't want to burn the time to validate all
# fields, but does check the month field. This stops, e.g.,
# datetime.datetime('1995-03-25') from yielding an insane object.
base = '1995-03-25'
if not issubclass(self.theclass, datetime):
base = base[:4]
for month_byte in '9', chr(0), chr(13), '\xff':
self.assertRaises(TypeError, self.theclass,
base[:2] + month_byte + base[3:])
for ord_byte in range(1, 13):
# This shouldn't blow up because of the month byte alone. If
# the implementation changes to do more-careful checking, it may
# blow up because other fields are insane.
self.theclass(base[:2] + chr(ord_byte) + base[3:])
#############################################################################
# datetime tests
示例6: test_combine
# 需要導入模塊: from datetime import time [as 別名]
# 或者: from datetime.time import time [as 別名]
def test_combine(self):
d = date(2002, 3, 4)
t = time(18, 45, 3, 1234)
expected = self.theclass(2002, 3, 4, 18, 45, 3, 1234)
combine = self.theclass.combine
dt = combine(d, t)
self.assertEqual(dt, expected)
dt = combine(time=t, date=d)
self.assertEqual(dt, expected)
self.assertEqual(d, dt.date())
self.assertEqual(t, dt.time())
self.assertEqual(dt, combine(dt.date(), dt.time()))
self.assertRaises(TypeError, combine) # need an arg
self.assertRaises(TypeError, combine, d) # need two args
self.assertRaises(TypeError, combine, t, d) # args reversed
self.assertRaises(TypeError, combine, d, t, 1) # too many args
self.assertRaises(TypeError, combine, "date", "time") # wrong types
示例7: test_argument_passing
# 需要導入模塊: from datetime import time [as 別名]
# 或者: from datetime.time import time [as 別名]
def test_argument_passing(self):
cls = self.theclass
# A datetime passes itself on, a time passes None.
class introspective(tzinfo):
def tzname(self, dt): return dt and "real" or "none"
def utcoffset(self, dt):
return timedelta(minutes = dt and 42 or -42)
dst = utcoffset
obj = cls(1, 2, 3, tzinfo=introspective())
expected = cls is time and "none" or "real"
self.assertEqual(obj.tzname(), expected)
expected = timedelta(minutes=(cls is time and -42 or 42))
self.assertEqual(obj.utcoffset(), expected)
self.assertEqual(obj.dst(), expected)
示例8: convert_between_tz_and_utc
# 需要導入模塊: from datetime import time [as 別名]
# 或者: from datetime.time import time [as 別名]
def convert_between_tz_and_utc(self, tz, utc):
dston = self.dston.replace(tzinfo=tz)
# Because 1:MM on the day DST ends is taken as being standard time,
# there is no spelling in tz for the last hour of daylight time.
# For purposes of the test, the last hour of DST is 0:MM, which is
# taken as being daylight time (and 1:MM is taken as being standard
# time).
dstoff = self.dstoff.replace(tzinfo=tz)
for delta in (timedelta(weeks=13),
DAY,
HOUR,
timedelta(minutes=1),
timedelta(microseconds=1)):
self.checkinside(dston, tz, utc, dston, dstoff)
for during in dston + delta, dstoff - delta:
self.checkinside(during, tz, utc, dston, dstoff)
self.checkoutside(dstoff, tz, utc)
for outside in dston - delta, dstoff + delta:
self.checkoutside(outside, tz, utc)
示例9: test_easy
# 需要導入模塊: from datetime import time [as 別名]
# 或者: from datetime.time import time [as 別名]
def test_easy(self):
# Despite the name of this test, the endcases are excruciating.
self.convert_between_tz_and_utc(Eastern, utc_real)
self.convert_between_tz_and_utc(Pacific, utc_real)
self.convert_between_tz_and_utc(Eastern, utc_fake)
self.convert_between_tz_and_utc(Pacific, utc_fake)
# The next is really dancing near the edge. It works because
# Pacific and Eastern are far enough apart that their "problem
# hours" don't overlap.
self.convert_between_tz_and_utc(Eastern, Pacific)
self.convert_between_tz_and_utc(Pacific, Eastern)
# OTOH, these fail! Don't enable them. The difficulty is that
# the edge case tests assume that every hour is representable in
# the "utc" class. This is always true for a fixed-offset tzinfo
# class (lke utc_real and utc_fake), but not for Eastern or Central.
# For these adjacent DST-aware time zones, the range of time offsets
# tested ends up creating hours in the one that aren't representable
# in the other. For the same reason, we would see failures in the
# Eastern vs Pacific tests too if we added 3*HOUR to the list of
# offset deltas in convert_between_tz_and_utc().
#
# self.convert_between_tz_and_utc(Eastern, Central) # can't work
# self.convert_between_tz_and_utc(Central, Eastern) # can't work
示例10: test_pickling_subclass
# 需要導入模塊: from datetime import time [as 別名]
# 或者: from datetime.time import time [as 別名]
def test_pickling_subclass(self):
# Make sure we can pickle/unpickle an instance of a subclass.
offset = timedelta(minutes=-300)
orig = PicklableFixedOffset(offset, 'cookie')
self.assertIsInstance(orig, tzinfo)
self.assertTrue(type(orig) is PicklableFixedOffset)
self.assertEqual(orig.utcoffset(None), offset)
self.assertEqual(orig.tzname(None), 'cookie')
for pickler, unpickler, proto in pickle_choices:
green = pickler.dumps(orig, proto)
derived = unpickler.loads(green)
self.assertIsInstance(derived, tzinfo)
self.assertTrue(type(derived) is PicklableFixedOffset)
self.assertEqual(derived.utcoffset(None), offset)
self.assertEqual(derived.tzname(None), 'cookie')
#############################################################################
# Base clase for testing a particular aspect of timedelta, time, date and
# datetime comparisons.
示例11: _interval_unpack
# 需要導入模塊: from datetime import time [as 別名]
# 或者: from datetime.time import time [as 別名]
def _interval_unpack(time_bytes):
"""
:rtype: time
"""
try:
return time(*unpack(">3b", time_bytes))
except Exception:
return None
示例12: _interval_pack
# 需要導入模塊: from datetime import time [as 別名]
# 或者: from datetime.time import time [as 別名]
def _interval_pack(t):
"""
:param t: time.time
:return: bytes
"""
return _intarray2bytes([t.hour, t.minute, t.second])
示例13: to_bytes
# 需要導入模塊: from datetime import time [as 別名]
# 或者: from datetime.time import time [as 別名]
def to_bytes(self):
write_bytes = pack(
">b" # 0x33
"B" # target station no
"2s" # 0x0700
"7s", # set time
0x33,
self.target_station_no,
_bin('07 00'),
_datetime_pack(self.set_time),
)
ba = _append_checksum(write_bytes)
return ba
示例14: test_fromtimestamp
# 需要導入模塊: from datetime import time [as 別名]
# 或者: from datetime.time import time [as 別名]
def test_fromtimestamp(self):
import time
# Try an arbitrary fixed value.
year, month, day = 1999, 9, 19
ts = time.mktime((year, month, day, 0, 0, 0, 0, 0, -1))
d = self.theclass.fromtimestamp(ts)
self.assertEqual(d.year, year)
self.assertEqual(d.month, month)
self.assertEqual(d.day, day)
示例15: test_today
# 需要導入模塊: from datetime import time [as 別名]
# 或者: from datetime.time import time [as 別名]
def test_today(self):
import time
# We claim that today() is like fromtimestamp(time.time()), so
# prove it.
for dummy in range(3):
today = self.theclass.today()
ts = time.time()
todayagain = self.theclass.fromtimestamp(ts)
if today == todayagain:
break
# There are several legit reasons that could fail:
# 1. It recently became midnight, between the today() and the
# time() calls.
# 2. The platform time() has such fine resolution that we'll
# never get the same value twice.
# 3. The platform time() has poor resolution, and we just
# happened to call today() right before a resolution quantum
# boundary.
# 4. The system clock got fiddled between calls.
# In any case, wait a little while and try again.
time.sleep(0.1)
# It worked or it didn't. If it didn't, assume it's reason #2, and
# let the test pass if they're within half a second of each other.
if today != todayagain:
self.assertAlmostEqual(todayagain, today,
delta=timedelta(seconds=0.5))