本文整理匯總了Python中clipboard.set方法的典型用法代碼示例。如果您正苦於以下問題：Python clipboard.set方法的具體用法？Python clipboard.set怎麽用？Python clipboard.set使用的例子？那麽, 這裏精選的方法代碼示例或許可以為您提供幫助。您也可以進一步了解該方法所在類clipboard的用法示例。
在下文中一共展示了clipboard.set方法的15個代碼示例，這些例子默認根據受歡迎程度排序。您可以為喜歡或者感覺有用的代碼點讚，您的評價將有助於係統推薦出更棒的Python代碼示例。
示例1: bloodforum
# 需要導入模塊: import clipboard [as 別名]
# 或者: from clipboard import set [as 別名]
def bloodforum():
# BloodForum is used on Hacker's Forum Page To Make Blood Text
try:
colors = ["#e00000","#c70000","#af0000","#a10000","#8e0000","#7d0000","#a00000","#ad0000","#ca0000","#e00000"]
new = ""
s = 0
a = 0
n = 2
while 1:
msg = unicode(raw_input("Message: "))
if msg == "!quit":
if verbose: print "Stopped"
break
msg = [msg[i:i+n] for i in range(0, len(msg), n)]
for _ in msg:
if s == 10:
s = a
a = 1
if a == 10:
a = 0
if _ == " ":
new = new + _
s = s - 1
else:
new = new + "[color=" + colors[s] + "]" + _ + "[/color]"
s = s + 1
clipboard.set(new)
new = ""
except Exception as e:
if verbose: print traceback.print_exc(file=sys.stdout)
pass 示例2: updown
# 需要導入模塊: import clipboard [as 別名]
# 或者: from clipboard import set [as 別名]
def updown():
# UpDown Makes Your Text Go Up And Down
colors = ["#sup","#/sup","#sub","#/sub"]
s = 0
new = ""
msgb = ""
try:
while 1:
sys.stderr = msg = unicode(raw_input("Message: "))
if msg == "!quit":
if verbose: print "Stopped"
break
if len(msg) >= 100:
msgb = msg[100:]
msg = msg[:100]
msg = msg.split(" ")
for _ in msg:
if s == len(colors):
s = 0
if _ == " ":
new = new + " "
s = s - 1
else:
new = new + colors[s].replace("#","[") + "]" + _ + " "
s = s + 1
clipboard.set("[c][b][efffff]" + new + msgb)
if verbose: print "Copied"
new = ""
msgb = ""
except Exception as e:
if verbose: print traceback.print_exc(file=sys.stdout)
pass 示例3: captcha
# 需要導入模塊: import clipboard [as 別名]
# 或者: from clipboard import set [as 別名]
def captcha():
# Makes text almost impossible to read
colors = ["#i","#/i","#i","#/i"]
s = 0
new = ""
msgb = ""
try:
while 1:
sys.stderr = msg = unicode(raw_input("Message: ").replace("a","4").replace("e","3").replace("t","7").replace("i","1").replace("o","0").replace("B","8").replace("s","5"))
if msg == "!quit":
if verbose: print "Stopped"
break
if len(msg) >= 100:
msgb = msg[100:]
msg = msg[:100]
msg = list(msg)
for _ in msg:
if s == len(colors):
s = 0
if _ == " ":
new = new + " "
s = s - 1
else:
new = new + colors[s].replace("#","[") + "]" + _
s = s + 1
clipboard.set("[c][b][efffff]" + new + msgb)
if verbose: print "Copied"
new = ""
msgb = ""
except Exception as e:
if verbose: print traceback.print_exc(file=sys.stdout)
pass 示例4: italics
# 需要導入模塊: import clipboard [as 別名]
# 或者: from clipboard import set [as 別名]
def italics():
# italics or not italics, which one?
colors = ["#i","#/i","#i","#/i"]
s = 0
new = ""
msgb = ""
try:
while 1:
sys.stderr = msg = unicode(raw_input("Message: "))
if msg == "!quit":
if verbose: print "Stopped"
break
if len(msg) >= 100:
msgb = msg[100:]
msg = msg[:100]
msg = list(msg)
for _ in msg:
if s == len(colors):
s = 0
if _ == " ":
new = new + " "
s = s - 1
else:
new = new + colors[s].replace("#","[") + "]" + _
s = s + 1
clipboard.set("[c][b][efffff]" + new + msgb)
if verbose: print "Copied"
new = ""
msgb = ""
except Exception as e:
if verbose: print traceback.print_exc(file=sys.stdout)
pass 示例5: liner
# 需要導入模塊: import clipboard [as 別名]
# 或者: from clipboard import set [as 別名]
def liner():
# so many lines!
colors = ["#u","#/u","#u","#/u"]
s = 0
new = ""
msgb = ""
try:
while 1:
sys.stderr = msg = unicode(raw_input("Message: "))
if msg == "!quit":
if verbose: print "Stopped"
break
if len(msg) >= 100:
msgb = msg[100:]
msg = msg[:100]
msg = list(msg)
for _ in msg:
if s == len(colors):
s = 0
if _ == " ":
new = new + " "
s = s - 1
else:
new = new + colors[s].replace("#","[") + "]" + _
s = s + 1
clipboard.set("[c][b][efffff]" + new + msgb)
if verbose: print "Copied"
new = ""
msgb = ""
except Exception as e:
if verbose: print traceback.print_exc(file=sys.stdout)
pass 示例6: l33t
# 需要導入模塊: import clipboard [as 別名]
# 或者: from clipboard import set [as 別名]
def l33t():
try:
while 1:
sys.stderr = msg = unicode(raw_input("Message: "))
if msg == "!quit":
if verbose: print "Stopped"
break
clipboard.set("[c][b][00ff00]"+unicode(msg.replace("a","4").replace("e","3").replace("t","7").replace("i","1").replace("o","0").replace("B","8").replace("s","5")))
if verbose: print "Copied"
except Exception as e:
if verbose: print traceback.print_exc(file=sys.stdout)
pass 示例7: fancy
# 需要導入模塊: import clipboard [as 別名]
# 或者: from clipboard import set [as 別名]
def fancy(cl="ord"):
# Font Types
# ord - Ordered cycle through all font options
# ran - Random choice of font options
# rancycle - Randomly choose 1 font to cycle with
# 1 - font 1, Candy-Cain-Like font structure
# 2 - font 2, blue and yellow lightning-like font structure
# 3 - font 3, black and yellow storm font structure
# 4 - font 4, light prism font structure
fa1 = "[c][b][efffff]-[ff0000]=[efffff]-[ff0000]=[efffff]- %s [efffff]-[ff0000]=[efffff]-[ff0000]=[efffff]-"
fa2 = "[c][b][0000ff]>[ffff00]> [0000ff]>[ffff00]>[efffff] %s [ffff00]<[0000ff]< [ffff00]<[0000ff]<"
fa3 = "[c][b][ffff00]+[585858]-[484848]=[585858]-[ffff00]+[efffff] %s [ffff00]+[585858]-[484848]=[585858]-[ffff00]+"
fa4 = "[c][b][9f9f9f]|[ffff00]: : :[9f9f9f]| [ffff00]-[efffff] %s [ffff00]- [9f9f9f]|[ffff00]: : :[9f9f9f]|"
ord = [fa1,fa2,fa3,fa4]
if cl == "ord":
try:
while 1:
for _ in ord:
sys.stderr = msg = unicode(raw_input("Message: "))
if msg == "!quit":
if verbose: print "Stopped"
break
clipboard.set(_ %(msg))
if verbose: print "Copied"
except Exception as e:
if verbose: print traceback.print_exc(file=sys.stdout)
pass
if cl == "ran":
try:
while 1:
_ = random.choice(ord)
sys.stderr = msg = unicode(raw_input("Message: "))
if msg == "!quit":
if verbose: print "Stopped"
break
clipboard.set(_ % (msg))
if verbose: print "Copied"
except Exception as e:
if verbose: print traceback.print_exc(file=sys.stdout)
pass 示例8: RegularMulticolor
# 需要導入模塊: import clipboard [as 別名]
# 或者: from clipboard import set [as 別名]
def RegularMulticolor(colors):
s = 0
new = ""
msgb = ""
try:
while 1:
sys.stderr = msg = unicode(raw_input("Message: "))
if msg == "!quit":
if verbose: print "Stopped"
break
msg = unicode(msg)
if len(msg) >= 22:
msgb = msg[22:]
msg = msg[:22]
msg = list(msg)
for _ in msg:
if s == len(colors):
s = 0
if _ == " ":
new = new + " "
s = s - 1
else:
new = new + colors[s].replace("#","[") + "]" + _
s = s + 1
clipboard.set("[c][b]" + new + msgb)
if verbose: print "Copied"
new = ""
msgb = ""
s = 0
except Exception as e:
if verbose: print traceback.print_exc(file=sys.stdout)
pass 示例9: clipboard_set
# 需要導入模塊: import clipboard [as 別名]
# 或者: from clipboard import set [as 別名]
def clipboard_set(s):
"""
Set the clipboard content.
:param s: string to set
:type s: six.text_type
"""
# TODO: non-unicode support
assert isinstance(s, six.text_type)
clipboard.set(s)
# -------------- pip ---------------------- 示例10: main
# 需要導入模塊: import clipboard [as 別名]
# 或者: from clipboard import set [as 別名]
def main():
if appex.is_running_extension():
url = appex.get_url() or appex.get_text()
else:
import console
try:
url = console.input_alert('Enter URL').strip()
if not url:
return
except KeyboardInterrupt:
return
print(f'Searching for <code> elements at {url}')
try:
elements = get_code_elements(url)
if not elements:
print(f'No <code> elements found')
return
result = '\n\n'.join([
f'# <code> element no {idx+1}\n\n' + code
for idx, code in enumerate(elements)
])
clipboard.set(result)
print(result)
print(f'{len(elements)} <code> element(s) copied to the clipboard')
except Exception as e:
print(f'Failed to get <code> element values: {e}') 示例11: run
# 需要導入模塊: import clipboard [as 別名]
# 或者: from clipboard import set [as 別名]
def run(self, input):
clipboard.set(input.value)
self.status = 'complete' 示例12: copy
# 需要導入模塊: import clipboard [as 別名]
# 或者: from clipboard import set [as 別名]
def copy(self):
import clipboard
i=editor.get_selection()
t=editor.get_text()
clipboard.set(t[i[0]:i[1]]) 示例13: cut
# 需要導入模塊: import clipboard [as 別名]
# 或者: from clipboard import set [as 別名]
def cut(self):
import clipboard
i=editor.get_selection()
t=editor.get_text()
clipboard.set(t[i[0]:i[1]])
editor.replace_text(i[0],i[1], '')
editor.set_selection(i[0],i[0]) 示例14: main
# 需要導入模塊: import clipboard [as 別名]
# 或者: from clipboard import set [as 別名]
def main():
filename = editor.get_path()
if not filename:
dialogs.hud_alert('No file selected', 'error')
return
pyui_filename = os.path.splitext(filename)[0] + '.pyui'
if not os.path.exists(pyui_filename):
folder = os.path.split(filename)[0]
files = os.listdir(folder)
files = [f for f in files if f.endswith('.pyui')]
if not files:
dialogs.hud_alert('No pyui files found', 'error')
return
selected_pyui = dialogs.list_dialog('Select pyui file', files)
if not selected_pyui:
return
pyui_filename = os.path.join(folder, selected_pyui)
with open(pyui_filename, 'rb') as f:
pyui = f.read()
compressed = base64.b64encode(bz2.compress(pyui)).decode('utf-8')
wrapped = '\n'.join(textwrap.wrap(compressed, 70))
code = """\
data = '''\\\n%s
'''
import ui
import bz2
from base64 import b64decode
pyui = bz2.decompress(b64decode(data))
v = ui.load_view_str(pyui.decode('utf-8'))
""" % (wrapped,)
clipboard.set(code)
dialogs.hud_alert('Code copied', 'success') 示例15: anchor
# 需要導入模塊: import clipboard [as 別名]
# 或者: from clipboard import set [as 別名]
def anchor(self, sender):
templ = " <a name='#'></a>"
(start, end) = self.markup.selected_range
link_label = self.markup.text[start:end]
link_name = quote(self.markup.text[start:end])
templ = templ.replace('#', link_name)
self.markup.replace_range((end, end), templ)
link = "[" + link_label + "](#" + link_name + ")"
clipboard.set(link)