Python QtGui.QTextEdit方法代碼示例

# 需要導入模塊: from PyQt4 import QtGui [as 別名]
# 或者: from PyQt4.QtGui import QTextEdit [as 別名]
def initUI(self):
        self.text_show2 = QtGui.QTextEdit()
        self.text_show2.setText(SHOW2STR)
        self.text_show2.setReadOnly(True)
        self.text_hex = QtGui.QTextEdit()
        self.text_hex.setText(HEXSTR)
        self.text_hex.setReadOnly(True)
        self.save_but = QtGui.QPushButton(u'保存為PDF', self)
        self.save_but.setCheckable(False)
        self.save_but.clicked.connect(self.save_pdf)
        vbox = QtGui.QVBoxLayout()
        vbox.addWidget(self.text_show2)
        vbox.addWidget(self.text_hex)
        vbox.addWidget(self.save_but)
        self.setLayout(vbox)
        """
        self.splitter = QtGui.QSplitter(self)
        self.splitter.addWidget(self.text_show2)
        self.splitter.addWidget(self.text_hex)
        self.splitter.setOrientation(QtCore.Qt.Vertical)
        """ 

# 需要導入模塊: from PyQt4 import QtGui [as 別名]
# 或者: from PyQt4.QtGui import QTextEdit [as 別名]
def setupUi(self, EmoticonDialog):
        EmoticonDialog.setObjectName(_fromUtf8("EmoticonDialog"))
        EmoticonDialog.resize(300, 500)
        self.verticalLayout = QtGui.QVBoxLayout(EmoticonDialog)
        self.verticalLayout.setObjectName(_fromUtf8("verticalLayout"))
        self.label = QtGui.QLabel(EmoticonDialog)
        self.label.setObjectName(_fromUtf8("label"))
        self.verticalLayout.addWidget(self.label)
        self.uiEmoticonTextEdit = QtGui.QTextEdit(EmoticonDialog)
        self.uiEmoticonTextEdit.setObjectName(_fromUtf8("uiEmoticonTextEdit"))
        self.verticalLayout.addWidget(self.uiEmoticonTextEdit)
        self.buttonBox = QtGui.QDialogButtonBox(EmoticonDialog)
        self.buttonBox.setOrientation(QtCore.Qt.Horizontal)
        self.buttonBox.setStandardButtons(QtGui.QDialogButtonBox.Cancel|QtGui.QDialogButtonBox.Ok)
        self.buttonBox.setObjectName(_fromUtf8("buttonBox"))
        self.verticalLayout.addWidget(self.buttonBox)

        self.retranslateUi(EmoticonDialog)
        QtCore.QObject.connect(self.buttonBox, QtCore.SIGNAL(_fromUtf8("accepted()")), EmoticonDialog.accept)
        QtCore.QObject.connect(self.buttonBox, QtCore.SIGNAL(_fromUtf8("rejected()")), EmoticonDialog.reject)
        QtCore.QMetaObject.connectSlotsByName(EmoticonDialog) 

# 需要導入模塊: from PyQt4 import QtGui [as 別名]
# 或者: from PyQt4.QtGui import QTextEdit [as 別名]
def initUI(self):

        self.text = QtGui.QTextEdit(self)

        # Set the tab stop width to around 33 pixels which is
        # more or less 8 spaces
        self.text.setTabStopWidth(33)

        self.initToolbar()
        self.initFormatbar()
        self.initMenubar()

        self.setCentralWidget(self.text)

        # Initialize a statusbar for the window
        self.statusbar = self.statusBar()

        # If the cursor position changes, call the function that displays
        # the line and column number
        self.text.cursorPositionChanged.connect(self.cursorPosition)

        self.setGeometry(100,100,1030,800)
        self.setWindowTitle("Writer")
        self.setWindowIcon(QtGui.QIcon("icons/icon.png")) 

# 需要導入模塊: from PyQt4 import QtGui [as 別名]
# 或者: from PyQt4.QtGui import QTextEdit [as 別名]
def addTextEdit(self, text, readOnly=True, startsVisible=True, oneLine=False):
        if oneLine:
            textEdit = QtGui.QLineEdit()
        else:
            textEdit = QtGui.QTextEdit()
        load_css_for_widget(textEdit, os.path.join(css_path, 'textedit.css'))

        if readOnly:
            textEdit.setText(text)
        else:
            textEdit.setPlaceholderText(text)

        textEdit.setReadOnly(readOnly)
        textEdit.setGeometry(100, 100, 800, 600)
        textEdit.setVisible(startsVisible)

        return textEdit 

# 需要導入模塊: from PyQt4 import QtGui [as 別名]
# 或者: from PyQt4.QtGui import QTextEdit [as 別名]
def setupUi(self, Dialog):
        Dialog.setObjectName(_fromUtf8("Dialog"))
        Dialog.resize(400, 300)
        self.verticalLayout = QtGui.QVBoxLayout(Dialog)
        self.verticalLayout.setObjectName(_fromUtf8("verticalLayout"))
        self.textEdit = QtGui.QTextEdit(Dialog)
        self.textEdit.setReadOnly(True)
        self.textEdit.setObjectName(_fromUtf8("textEdit"))
        self.verticalLayout.addWidget(self.textEdit)
        self.horizontalLayout = QtGui.QHBoxLayout()
        self.horizontalLayout.setObjectName(_fromUtf8("horizontalLayout"))
        spacerItem = QtGui.QSpacerItem(40, 20, QtGui.QSizePolicy.Expanding, QtGui.QSizePolicy.Minimum)
        self.horizontalLayout.addItem(spacerItem)
        self.ExitButton = QtGui.QPushButton(Dialog)
        self.ExitButton.setObjectName(_fromUtf8("ExitButton"))
        self.horizontalLayout.addWidget(self.ExitButton)
        spacerItem1 = QtGui.QSpacerItem(40, 20, QtGui.QSizePolicy.Expanding, QtGui.QSizePolicy.Minimum)
        self.horizontalLayout.addItem(spacerItem1)
        self.verticalLayout.addLayout(self.horizontalLayout)

        self.retranslateUi(Dialog)
        QtCore.QMetaObject.connectSlotsByName(Dialog) 

# 需要導入模塊: from PyQt4 import QtGui [as 別名]
# 或者: from PyQt4.QtGui import QTextEdit [as 別名]
def setupUi(self, MemoEdit):
        '''被memoedit調用'''
        MemoEdit.setFixedWidth(400)

        '''初始化組件'''
        self.titleEdit = QtGui.QLineEdit()
        self.timeEdit = QtGui.QDateTimeEdit()
        self.contentEdit = QtGui.QTextEdit()
        self.okBtn = QtGui.QPushButton(_fromUtf8("確定"))
        self.layout = QtGui.QVBoxLayout()

        '''設置組件大小屬性'''
        self.layout.setMargin(0)
        self.layout.setSpacing(0)

        ''' 設置stylesheet'''
        '''設置布局'''
        self.layout.addWidget(self.titleEdit)
        self.layout.addWidget(self.timeEdit)
        self.layout.addWidget(self.contentEdit)
        self.layout.addWidget(self.okBtn)

        self.setLayout(self.layout) 

# 需要導入模塊: from PyQt4 import QtGui [as 別名]
# 或者: from PyQt4.QtGui import QTextEdit [as 別名]
def __init__(self):
        super(NikeAddAccount, self).__init__()
        self.setWindowModality(QtCore.Qt.ApplicationModal)
        self.setWindowTitle("賬號添加")
        self.setFixedSize(500, 400)

        self.label = QtGui.QLabel(' 以空格/逗號/冒號為分界線，一個賬號一行，例：\nabc@qq.com 123456 42或abc@qq.com,123456或abc@qq.com:123456:42 ', self)

        self.line = QtGui.QTextEdit(self)

        self.button_add = QtGui.QPushButton('添加賬號', self)

        self.button_clear = QtGui.QPushButton('清空賬號', self)

        hbox = QtGui.QHBoxLayout()
        hbox.addStretch(3)
        hbox.addWidget(self.button_add)
        hbox.addWidget(self.button_clear)
        vbox = QtGui.QVBoxLayout()
        vbox.addWidget(self.label)
        vbox.addWidget(self.line)
        vbox.addLayout(hbox)
        self.setLayout(vbox) 

# 需要導入模塊: from PyQt4 import QtGui [as 別名]
# 或者: from PyQt4.QtGui import QTextEdit [as 別名]
def setupUi(self, qgpkgDlg):
        qgpkgDlg.setObjectName(_fromUtf8("qgpkgDlg"))
        qgpkgDlg.resize(456, 358)
        icon = QtGui.QIcon()
        icon.addPixmap(QtGui.QPixmap(_fromUtf8(":/plugins/QgisGeopackage/about.png")), QtGui.QIcon.Normal, QtGui.QIcon.Off)
        qgpkgDlg.setWindowIcon(icon)
        self.verticalLayout = QtGui.QVBoxLayout(qgpkgDlg)
        self.verticalLayout.setObjectName(_fromUtf8("verticalLayout"))
        self.textEdit = QtGui.QTextEdit(qgpkgDlg)
        self.textEdit.setReadOnly(True)
        self.textEdit.setObjectName(_fromUtf8("textEdit"))
        self.verticalLayout.addWidget(self.textEdit)
        self.button_box = QtGui.QDialogButtonBox(qgpkgDlg)
        self.button_box.setOrientation(QtCore.Qt.Horizontal)
        self.button_box.setStandardButtons(QtGui.QDialogButtonBox.Close)
        self.button_box.setObjectName(_fromUtf8("button_box"))
        self.verticalLayout.addWidget(self.button_box)

        self.retranslateUi(qgpkgDlg)
        QtCore.QObject.connect(self.button_box, QtCore.SIGNAL(_fromUtf8("accepted()")), qgpkgDlg.accept)
        QtCore.QObject.connect(self.button_box, QtCore.SIGNAL(_fromUtf8("rejected()")), qgpkgDlg.reject)
        QtCore.QMetaObject.connectSlotsByName(qgpkgDlg) 

# 需要導入模塊: from PyQt4 import QtGui [as 別名]
# 或者: from PyQt4.QtGui import QTextEdit [as 別名]
def moveCursor(self,start,end):

        # We retrieve the QTextCursor object from the parent's QTextEdit
        cursor = self.parent.text.textCursor()

        # Then we set the position to the beginning of the last match
        cursor.setPosition(start)

        # Next we move the cursor over the match and pass the KeepAnchor parameter
        # which will make the cursor select the the match's text
        cursor.movePosition(QtGui.QTextCursor.Right,QtGui.QTextCursor.KeepAnchor,end - start)

        # And finally we set this new cursor as the parent's 
        self.parent.text.setTextCursor(cursor) 

# 需要導入模塊: from PyQt4 import QtGui [as 別名]
# 或者: from PyQt4.QtGui import QTextEdit [as 別名]
def setupUi(self, Form):
        Form.setObjectName(_fromUtf8("Form"))
        Form.resize(529, 329)
        self.selInfoWidget = QtGui.QWidget(Form)
        self.selInfoWidget.setGeometry(QtCore.QRect(260, 10, 264, 222))
        self.selInfoWidget.setObjectName(_fromUtf8("selInfoWidget"))
        self.gridLayout = QtGui.QGridLayout(self.selInfoWidget)
        self.gridLayout.setMargin(0)
        self.gridLayout.setObjectName(_fromUtf8("gridLayout"))
        self.selDescLabel = QtGui.QLabel(self.selInfoWidget)
        self.selDescLabel.setText(_fromUtf8(""))
        self.selDescLabel.setAlignment(QtCore.Qt.AlignLeading|QtCore.Qt.AlignLeft|QtCore.Qt.AlignTop)
        self.selDescLabel.setWordWrap(True)
        self.selDescLabel.setObjectName(_fromUtf8("selDescLabel"))
        self.gridLayout.addWidget(self.selDescLabel, 0, 0, 1, 1)
        self.selNameLabel = QtGui.QLabel(self.selInfoWidget)
        font = QtGui.QFont()
        font.setBold(True)
        font.setWeight(75)
        self.selNameLabel.setFont(font)
        self.selNameLabel.setText(_fromUtf8(""))
        self.selNameLabel.setObjectName(_fromUtf8("selNameLabel"))
        self.gridLayout.addWidget(self.selNameLabel, 0, 1, 1, 1)
        self.selectedTree = DataTreeWidget(self.selInfoWidget)
        self.selectedTree.setObjectName(_fromUtf8("selectedTree"))
        self.selectedTree.headerItem().setText(0, _fromUtf8("1"))
        self.gridLayout.addWidget(self.selectedTree, 1, 0, 1, 2)
        self.hoverText = QtGui.QTextEdit(Form)
        self.hoverText.setGeometry(QtCore.QRect(0, 240, 521, 81))
        self.hoverText.setObjectName(_fromUtf8("hoverText"))
        self.view = FlowchartGraphicsView(Form)
        self.view.setGeometry(QtCore.QRect(0, 0, 256, 192))
        self.view.setObjectName(_fromUtf8("view"))

        self.retranslateUi(Form)
        QtCore.QMetaObject.connectSlotsByName(Form) 

# 需要導入模塊: from PyQt4 import QtGui [as 別名]
# 或者: from PyQt4.QtGui import QTextEdit [as 別名]
def initUI(self):

        self.text = QtGui.QTextEdit(self)

        self.initToolbar()
        self.initFormatbar()
        self.initMenubar()

        # Set the tab stop width to around 33 pixels which is
        # about 8 spaces
        self.text.setTabStopWidth(33)

        self.setCentralWidget(self.text)

        # Initialize a statusbar for the window
        self.statusbar = self.statusBar()

        # If the cursor position changes, call the function that displays
        # the line and column number
        self.text.cursorPositionChanged.connect(self.cursorPosition)

        # x and y coordinates on the screen, width, height
        self.setGeometry(100,100,1030,800)

        self.setWindowTitle("Writer")

        self.setWindowIcon(QtGui.QIcon("icons/icon.png")) 

# 需要導入模塊: from PyQt4 import QtGui [as 別名]
# 或者: from PyQt4.QtGui import QTextEdit [as 別名]
def moveCursor(self,start,end):

        # We retrieve the QTextCursor object from the parent's QTextEdit
        cursor = self.parent.text.textCursor()

        # Then we set the position to the beginning of the last match
        cursor.setPosition(start)

        # Next we move the Cursor by over the match and pass the KeepAnchor parameter
        # which will make the cursor select the the match's text
        cursor.movePosition(QtGui.QTextCursor.Right,QtGui.QTextCursor.KeepAnchor,end - start)

        # And finally we set this new cursor as the parent's 
        self.parent.text.setTextCursor(cursor) 

# 需要導入模塊: from PyQt4 import QtGui [as 別名]
# 或者: from PyQt4.QtGui import QTextEdit [as 別名]
def setupUi(self, BatchAdd):
        BatchAdd.setObjectName(_fromUtf8("BatchAdd"))
        BatchAdd.setWindowModality(QtCore.Qt.NonModal)
        BatchAdd.resize(400, 300)
        BatchAdd.setMaximumSize(QtCore.QSize(400, 16777215))
        BatchAdd.setModal(False)
        self.verticalLayout_2 = QtGui.QVBoxLayout(BatchAdd)
        self.verticalLayout_2.setObjectName(_fromUtf8("verticalLayout_2"))
        self.verticalWidget = QtGui.QWidget(BatchAdd)
        self.verticalWidget.setObjectName(_fromUtf8("verticalWidget"))
        self.verticalLayout = QtGui.QVBoxLayout(self.verticalWidget)
        self.verticalLayout.setMargin(0)
        self.verticalLayout.setObjectName(_fromUtf8("verticalLayout"))
        self.UrlList = QtGui.QTextEdit(self.verticalWidget)
        self.UrlList.setObjectName(_fromUtf8("UrlList"))
        self.verticalLayout.addWidget(self.UrlList)
        self.horizontalLayout = QtGui.QHBoxLayout()
        self.horizontalLayout.setObjectName(_fromUtf8("horizontalLayout"))
        self.Browse = QtGui.QPushButton(self.verticalWidget)
        self.Browse.setObjectName(_fromUtf8("Browse"))
        self.horizontalLayout.addWidget(self.Browse)
        self.Add = QtGui.QPushButton(self.verticalWidget)
        self.Add.setObjectName(_fromUtf8("Add"))
        self.horizontalLayout.addWidget(self.Add)
        self.Close = QtGui.QPushButton(self.verticalWidget)
        self.Close.setObjectName(_fromUtf8("Close"))
        self.horizontalLayout.addWidget(self.Close)
        self.verticalLayout.addLayout(self.horizontalLayout)
        self.verticalLayout_2.addWidget(self.verticalWidget)

        self.retranslateUi(BatchAdd)
        QtCore.QMetaObject.connectSlotsByName(BatchAdd) 

# 需要導入模塊: from PyQt4 import QtGui [as 別名]
# 或者: from PyQt4.QtGui import QTextEdit [as 別名]
def setupUi(self, frmAbout):
        frmAbout.setObjectName(_fromUtf8("frmAbout"))
        frmAbout.resize(718, 541)
        sizePolicy = QtGui.QSizePolicy(QtGui.QSizePolicy.Preferred, QtGui.QSizePolicy.Preferred)
        sizePolicy.setHorizontalStretch(0)
        sizePolicy.setVerticalStretch(0)
        sizePolicy.setHeightForWidth(frmAbout.sizePolicy().hasHeightForWidth())
        frmAbout.setSizePolicy(sizePolicy)
        frmAbout.setLayoutDirection(QtCore.Qt.LeftToRight)
        self.gridLayout = QtGui.QGridLayout(frmAbout)
        self.gridLayout.setMargin(9)
        self.gridLayout.setSpacing(6)
        self.gridLayout.setObjectName(_fromUtf8("gridLayout"))
        self.txtAbout = QtGui.QTextEdit(frmAbout)
        self.txtAbout.setReadOnly(True)
        self.txtAbout.setObjectName(_fromUtf8("txtAbout"))
        self.gridLayout.addWidget(self.txtAbout, 0, 0, 1, 2)
        self.btnSTDMHome = QtGui.QPushButton(frmAbout)
        self.btnSTDMHome.setMinimumSize(QtCore.QSize(0, 30))
        self.btnSTDMHome.setObjectName(_fromUtf8("btnSTDMHome"))
        self.gridLayout.addWidget(self.btnSTDMHome, 1, 0, 1, 1)
        self.btnContactUs = QtGui.QPushButton(frmAbout)
        self.btnContactUs.setMinimumSize(QtCore.QSize(0, 30))
        self.btnContactUs.setObjectName(_fromUtf8("btnContactUs"))
        self.gridLayout.addWidget(self.btnContactUs, 1, 1, 1, 1)
        self.buttonBox = QtGui.QDialogButtonBox(frmAbout)
        self.buttonBox.setStandardButtons(QtGui.QDialogButtonBox.Close)
        self.buttonBox.setObjectName(_fromUtf8("buttonBox"))
        self.gridLayout.addWidget(self.buttonBox, 2, 0, 1, 2)

        self.retranslateUi(frmAbout)
        QtCore.QObject.connect(self.buttonBox, QtCore.SIGNAL(_fromUtf8("rejected()")), frmAbout.reject)
        QtCore.QMetaObject.connectSlotsByName(frmAbout) 

# 需要導入模塊: from PyQt4 import QtGui [as 別名]
# 或者: from PyQt4.QtGui import QTextEdit [as 別名]
def createTestEditor(self):
        """This function create widget for Library Editor"""
        global count

        self.testWidget = QtGui.QWidget()
        self.testArea = QtGui.QTextEdit()
        self.testLayout = QtGui.QVBoxLayout()
        self.testLayout.addWidget(self.testArea)

        # Adding to main Layout
        self.testWidget.setLayout(self.testLayout)
        dock['Tips-' + str(count)] = QtGui.QDockWidget('Tips-' + str(count))
        dock['Tips-' + str(count)].setWidget(self.testWidget)
        self.addDockWidget(QtCore.Qt.TopDockWidgetArea,
                           dock['Tips-' + str(count)])
        self.tabifyDockWidget(
            dock['Welcome'], dock['Tips-' + str(count)])

        dock['Tips-' + str(count)].setVisible(True)
        dock['Tips-' + str(count)].setFocus()

        dock['Tips-' + str(count)].raise_()

        temp = self.obj_appconfig.current_project['ProjectName']
        if temp:
            self.obj_appconfig.dock_dict[temp].append(
                dock['Tips-' + str(count)]
            )
        count = count + 1