Python Domoticz.Device方法代碼示例

# 需要導入模塊: import Domoticz [as 別名]
# 或者: from Domoticz import Device [as 別名]
def onStart():
    global switch

    if Parameters["Mode6"] == "Debug":
        Domoticz.Debugging(1)
    if (len(Devices) == 0):
        Domoticz.Device(Name="Switch 1", Unit=1, TypeName="Switch").Create()
        Domoticz.Log("Device created.")
    Domoticz.Heartbeat(30)
    
    switch.ip = Parameters["Address"]
    switch.port = Parameters["Port"]

    try:
        status = switch.status()
    except Exception as e:
        Domoticz.Error('Except onStart: ' + str(e))
        return

    updStatus(status)

    DumpConfigToLog() 

# 需要導入模塊: import Domoticz [as 別名]
# 或者: from Domoticz import Device [as 別名]
def Sensors(self, strData):    
        Domoticz.Log("No. of sensors found: " + str(len(self.GetValue(strData["response"], "kakusensors",{}))))

        for Sensor in self.GetValue(strData["response"], "kakusensors",{}):
            sens_id = Sensor["id"] + self.sensor_id            
            sens_type = self.GetValue(Sensor, "type", "Unknown").lower()
            sens_name = self.GetValue(Sensor, "name", "Unknown")
            self.hw_types.update({str(sens_id): str(sens_type)})
            
            if ( sens_id not in Devices ):                
                if ( sens_type == "doorbell" ):                    
                    Domoticz.Device(Name=sens_name,  Unit=sens_id, Type=17, Switchtype=1).Create()
                elif ( sens_type == "motion" ):
                    Domoticz.Device(Name=sens_name,  Unit=sens_id, Type=17, Switchtype=8).Create()
                elif ( sens_type == "contact" ):
                    Domoticz.Device(Name=sens_name,  Unit=sens_id, Type=17, Switchtype=2).Create()
                elif ( sens_type == "smoke" ) or ( sens_type == "smoke868" ):
                    Domoticz.Device(Name=sens_name,  Unit=sens_id, Type=32, Subtype=3).Create()                
                    
        return

    # TODO: Verify it works... 

# 需要導入模塊: import Domoticz [as 別名]
# 或者: from Domoticz import Device [as 別名]
def onStart(self):
    try:
      self.logLevel = int(Parameters["Mode6"])
    except:
      self.LogError("Debuglevel '"+Parameters["Mode6"]+"' is not an integer")
      
    if self.logLevel == 10:
      Domoticz.Debugging(1)
    self.LogMessage("onStart called", 9)
    
    Domoticz.Heartbeat(int(Parameters["Mode2"]))
      
    if (len(Devices) == 0):
      Domoticz.Device(Name="Free space", Unit=1, TypeName="Custom", Image=3, Options={"Custom": ("1;" + Parameters["Mode1"])}).Create()
      Domoticz.Device(Name="Temperature", Unit=2, Type=80, Subtype=5, Switchtype=0, Image=0).Create()
    elif 1 in Devices:
      Devices[1].Update(0, "0", Options={"Custom": ("1;" + Parameters["Mode1"])})
      
    self.DumpConfigToLog()
    
    return 

# 需要導入模塊: import Domoticz [as 別名]
# 或者: from Domoticz import Device [as 別名]
def pollnodes(self):
        self.BatteryNodes = []
        # poll the openzwave file
        if not self.error:
            try:
                zwavexml = xml.parse(self.zwaveinfofilepath)
                zwave = zwavexml.getroot()
            except:
                Domoticz.Error("Error reading openzwave file {}".format(self.zwaveinfofilepath))
            else:
                for node in zwave:
                    for commandclass in node[1]:  # node[1] is the list of CommandClasses
                        if commandclass.attrib["id"] == "128":  # CommandClass id=128 is BATTERY_LEVEL
                            self.BatteryNodes.append(zwnode(int(node.attrib["id"]), node.attrib["name"],
                                                            int(commandclass[1].attrib["value"])))
                            break

        for node in self.BatteryNodes:
            Domoticz.Debug("Node {} {} has battery level of {}%".format(node.nodeid, node.name, node.level))
            # if device does not yet exist, then create it
            if not (node.nodeid in Devices):
                Domoticz.Device(Name=node.name, Unit=node.nodeid, TypeName="Custom",
                                Options={"Custom": "1;%"}).Create()
            self.UpdateDevice(node.nodeid, str(node.level)) 

# 需要導入模塊: import Domoticz [as 別名]
# 或者: from Domoticz import Device [as 別名]
def addListeningMode(strCode):
  nValue = Devices[MAINLISTENINGMODE].nValue
  sValue = Devices[MAINLISTENINGMODE].sValue
  dictOptions = Devices[MAINLISTENINGMODE].Options 
  Domoticz.Log(dictOptions["LevelActions"])
  Domoticz.Log(dictOptions["LevelNames"])
  dictOptions["LevelNames"] = dictOptions["LevelNames"]+'|['+strCode+']'+' New'
  dictOptions["LevelActions"] = dictOptions["LevelActions"]+'|'
  Domoticz.Log(dictOptions["LevelActions"])
  Domoticz.Log(dictOptions["LevelNames"])

  Devices[MAINLISTENINGMODE].Update(nValue = nValue, sValue = sValue, Options = dictOptions) 

#  Domoticz.Device(Name=(self.XMLRoot.find('device')).find('model').text + \
#            ' ' + zone.get('name') + " Mode", Unit=MAINLISTENINGMODE, \
#            TypeName="Selector Switch", Switchtype=18, Image=5, \
#            Options = dictOptions).Create() 

# 需要導入模塊: import Domoticz [as 別名]
# 或者: from Domoticz import Device [as 別名]
def DumpConfigToLog():
    for x in Parameters:
        if Parameters[x] != "":
            Domoticz.Debug( "'" + x + "':'" + str(Parameters[x]) + "'")
    Domoticz.Debug("Device count: " + str(len(Devices)))
    for x in Devices:
        Domoticz.Debug("Device:           " + str(x) + " - " + str(Devices[x]))
        Domoticz.Debug("Device ID:       '" + str(Devices[x].ID) + "'")
        Domoticz.Debug("Device Name:     '" + Devices[x].Name + "'")
        Domoticz.Debug("Device nValue:    " + str(Devices[x].nValue))
        Domoticz.Debug("Device sValue:   '" + Devices[x].sValue + "'")
        Domoticz.Debug("Device LastLevel: " + str(Devices[x].LastLevel))
    return 

# 需要導入模塊: import Domoticz [as 別名]
# 或者: from Domoticz import Device [as 別名]
def onHeartbeat():
    _plugin.onHeartbeat()

# Update Device into database 

# 需要導入模塊: import Domoticz [as 別名]
# 或者: from Domoticz import Device [as 別名]
def UpdateImage(Unit):
    if Unit in Devices and Parameters["Mode2"] in Images:
        LogMessage("Device Image update: '" + Parameters["Mode2"] + "', Currently " + str(Devices[Unit].Image) + ", should be " + str(Images[Parameters["Mode2"]].ID))
        if Devices[Unit].Image != Images[Parameters["Mode2"]].ID:
            Devices[Unit].Update(nValue=Devices[Unit].nValue, sValue=str(Devices[Unit].sValue), Image=Images[Parameters["Mode2"]].ID)
    return

# xml built in parser threw import error on expat so just do it manually 

# 需要導入模塊: import Domoticz [as 別名]
# 或者: from Domoticz import Device [as 別名]
def DumpConfigToLog():
    for x in Parameters:
        if Parameters[x] != "":
            LogMessage( "'" + x + "':'" + str(Parameters[x]) + "'")
    LogMessage("Device count: " + str(len(Devices)))
    for x in Devices:
        LogMessage("Device:           " + str(x) + " - " + str(Devices[x]))
        LogMessage("Internal ID:     '" + str(Devices[x].ID) + "'")
        LogMessage("External ID:     '" + str(Devices[x].DeviceID) + "'")
        LogMessage("Device Name:     '" + Devices[x].Name + "'")
        LogMessage("Device nValue:    " + str(Devices[x].nValue))
        LogMessage("Device sValue:   '" + Devices[x].sValue + "'")
        LogMessage("Device LastLevel: " + str(Devices[x].LastLevel))
    return 

# 需要導入模塊: import Domoticz [as 別名]
# 或者: from Domoticz import Device [as 別名]
def DumpConfigToLog():
	for x in Parameters:
		if Parameters[x] != "":
			Domoticz.Debug( "'" + x + "':'" + str(Parameters[x]) + "'")
	Domoticz.Debug("Device count: " + str(len(Devices)))
	for x in Devices:
		Domoticz.Debug("Device:		   " + str(x) + " - " + str(Devices[x]))
		Domoticz.Debug("Device ID:	   '" + str(Devices[x].ID) + "'")
		Domoticz.Debug("Device Name:	 '" + Devices[x].Name + "'")
		Domoticz.Debug("Device nValue:	" + str(Devices[x].nValue))
		Domoticz.Debug("Device sValue:   '" + Devices[x].sValue + "'")
		Domoticz.Debug("Device LastLevel: " + str(Devices[x].LastLevel))
		Domoticz.Debug("Options:         '" + str(Devices[x].Options) + "'")
	return 

# 需要導入模塊: import Domoticz [as 別名]
# 或者: from Domoticz import Device [as 別名]
def DecodeInfoType0(DecData, infoType):
	try :
		IsCreated=False
		x=0
		# New device will start at 1 or at last + 1
		nbrdevices=0
		protocol = DecData['frame']['header']['protocol']
		SubType = DecData['frame']['infos']['subType']
		id = DecData['frame']['infos']['id']
		Domoticz.Debug("id : " + str(id))
		
		Options = {"infoType":infoType, "id": str(id), "protocol": str(protocol)}
		Domoticz.Debug("Options to find or set : " + str(Options))
		#########check if devices exist ####################
		for x in Devices:
			#JJE - start
			DOptions = Devices[x].Options
	#				if Devices[x].Options == Options :
			if  DOptions["protocol"] == Options["protocol"] :
				if DOptions["infoType"] == Options["infoType"] :
					if DOptions["id"] == Options["id"] :
					#JJE - end
						IsCreated = True
						Domoticz.Log("Devices already exist. Unit=" + str(x))
						Domoticz.Debug("Options found in DB: " + str(Devices[x].Options) + " for devices unit " + str(x))
						break
		if IsCreated == False :
			Domoticz.Debug("isCreated = false")
		nbrdevices=x
		########### create device if not find ###############
		if IsCreated == False and Parameters["Mode4"] == "True" :
			nbrdevices += 1
			Domoticz.Device(Name=protocol + " - " + id, Unit=nbrdevices, Type=16, Switchtype=0).Create()
			Devices[nbrdevices].Update(nValue =int(SubType),sValue = str(SubType),Options = Options)
		elif IsCreated == True :
		############ update device if found###################
			Devices[nbrdevices].Update(nValue =int(SubType),sValue = str(SubType))
	except:
		Domoticz.Log("Error while decoding Infotype0 frame")
		return 

# 需要導入模塊: import Domoticz [as 別名]
# 或者: from Domoticz import Device [as 別名]
def onStart():
    global _pico
    
    if Parameters["Mode6"] == "Debug":
        Domoticz.Debugging(1)
    Domoticz.Heartbeat(20)

    for dev, cfg in deviceDict.items():
        if not dev in Devices:
            Domoticz.Device(Name=cfg["Name"], Unit=cfg["Unit"], TypeName=cfg["TypeName"]).Create()
            Domoticz.Log("Device created: " + cfg["Name"])

    result = _pico.getData()
    #Domoticz.Log("reg 0x69 0-0x26:" + str(data) + "\nlength:" + str(len(data)))
    Domoticz.Log("PCB version: " + _pico.picoData["verPCB"])
    Domoticz.Log("Bootloader version: " + _pico.picoData["verBoot"])
    Domoticz.Log("FW version: " + str(_pico.picoData["verFW"]))
    Domoticz.Log("Bat Powering running time (min): " + str(_pico.picoData["pwrRunTime"]))
    Domoticz.Debug("-" * 20)
    Domoticz.Debug("BAT Voltage: " + str(_pico.picoData["voltBat"]))
    Domoticz.Debug("RPi Voltage: " + str(_pico.picoData["voltRpi"]))
    Domoticz.Debug("NTC1 Temperature: " + str(_pico.picoData["tempNtc1"]))
    Domoticz.Debug("Powering Mode: " + _pico.picoData["pwrMode"])
    Domoticz.Debug("User LED Orange: " + str(_pico.picoData["ledOrange"]))
    Domoticz.Debug("User LED Green: " + str(_pico.picoData["ledGreen"]))
    Domoticz.Debug("User LED Blue: " + str(_pico.picoData["ledBlue"]))
    Domoticz.Debug("Enable LEDs: " + str(_pico.picoData["ledEnable"]))

    if result:
        UpdateDevice(1, 0, str(_pico.picoData["voltBat"]), updEvery=True)
        UpdateDevice(2, 0, str(_pico.picoData["voltRpi"]), updEvery=True)
        UpdateDevice(3, 0, str(_pico.picoData["tempNtc1"]), updEvery=True)
        UpdateDevice(4, 0, _pico.picoData["pwrMode"])
        UpdateDevice(5, _pico.picoData["ledOrange"], "0")
        UpdateDevice(6, _pico.picoData["ledGreen"], "0")
        UpdateDevice(7, _pico.picoData["ledBlue"], "0")
        UpdateDevice(8, _pico.picoData["ledEnable"], "0")

    #DumpConfigToLog() 

# 需要導入模塊: import Domoticz [as 別名]
# 或者: from Domoticz import Device [as 別名]
def EnergyMeters(self, strData):                
        i = 0
        for Energymeter in self.GetValue(strData["response"], "energymeters", {}):
            if ( self.en_id+i not in Devices ):
                Domoticz.Device(Name="Energymeter",  Unit=self.en_id+i, TypeName="kWh").Create()
            en_0 = self.GetValue(Energymeter, "po", "0")
            en_1 = self.GetValue(Energymeter, "dayTotal", "0")
            UpdateDevice(self.en_id+i, 0, str(en_0)+";"+str(en_1 * 1000))
            i = i + 1
        return 

# 需要導入模塊: import Domoticz [as 別名]
# 或者: from Domoticz import Device [as 別名]
def Switches(self, strData):    
        Domoticz.Log("No. of switches found: " + str(len(strData["response"]["switches"])))
        for Switch in self.GetValue(strData["response"], "switches", {}):
            sw_id = Switch["id"] + 1
            sw_status = self.GetValue(Switch, "status", "off").lower()            
            sw_type = self.GetValue(Switch, "type", "switch").lower()            
            sw_name = self.GetValue(Switch, "name", "switch").lower()            
            self.hw_types.update({str(sw_id): sw_type})
            
            if ( sw_id not in Devices ):                
                if ( sw_type == "switch" ) or ( sw_type == "virtual" ):
                    Domoticz.Device(Name=sw_name,  Unit=sw_id, TypeName="Switch").Create()                
                elif ( sw_type == "dimmer" ):
                    Domoticz.Device(Name=sw_name,  Unit=sw_id, Type=244, Subtype=73, Switchtype=7).Create()
                elif ( sw_type == "somfy" ) or ( sw_type == "asun" ):
                    Domoticz.Device(Name=sw_name,  Unit=sw_id, Type=244, Subtype=73, Switchtype=15).Create()

            if ( str(sw_status).lower() == "on" ):
                if ( sw_type == "dimmer" ):
                    sw_status = "2"
                else:
                    sw_status = "1"
            else:
                sw_status = "0"
                
            # Update the switch status
            try:
                if ( sw_type == "switch" ) or ( sw_type == "virtual" ):
                    UpdateDevice(sw_id, int(sw_status), "")            
                elif ( sw_type == "dimmer" ):                
                    UpdateDevice(sw_id, int(sw_status), str(Switch["dimlevel"]))
                elif ( sw_type == "somfy" ):
                    UpdateDevice(sw_id, int(Switch["mode"]), "")
            except:
                Domoticz.Error("Error at setting device status! Device: "+sw_name)
                
        return 

# 需要導入模塊: import Domoticz [as 別名]
# 或者: from Domoticz import Device [as 別名]
def Thermometers(self, strData):            
        Domoticz.Log("No. of thermometers found: " + str(len(self.GetValue(strData["response"], "thermometers",{}))))
        i = 0        
        for Thermometer in self.GetValue(strData["response"], "thermometers", {}):
            if ( self.term_id+i not in Devices ):
                Domoticz.Device(Name=Thermometer["name"],  Unit=self.term_id+i, TypeName="Temp+Hum").Create()
            te_0 = self.GetValue(Thermometer, "te", 0)
            hu_0 = self.GetValue(Thermometer, "hu", 0)
            UpdateDevice(self.term_id+i, 0, str(te_0)+";"+str(hu_0)+";"+str(self.HumStat(hu_0)))
            i = i + 1
        return