本文整理匯總了Python中tomato.devices.Device類的典型用法代碼示例。如果您正苦於以下問題：Python Device類的具體用法？Python Device怎麽用？Python Device使用的例子？那麽, 這裏精選的類代碼示例或許可以為您提供幫助。
在下文中一共展示了Device類的15個代碼示例，這些例子默認根據受歡迎程度排序。您可以為喜歡或者感覺有用的代碼點讚，您的評價將有助於係統推薦出更棒的Python代碼示例。
示例1: configure
def configure(self, properties):
if "template" in properties:
fault.check(self.state == State.CREATED, "Cannot change template of prepared device: %s" % self.name)
Device.configure(self, properties)
if "template" in properties:
self.setTemplate(properties["template"])
self._assignTemplate()
self.save()示例2: configure
def configure(self, properties):
if "template" in properties:
fault.check(self.state != State.STARTED, "Cannot change template of running device: %s" % self.name)
Device.configure(self, properties)
if "template" in properties:
self.setTemplate(properties["template"])
if self.state == State.PREPARED:
qm.useTemplate(self.host, self.getVmid(), self.getTemplate())
self.save()示例3: configure
def configure(self, properties):
if "template" in properties:
fault.check(self.state == State.CREATED, "Cannot change template of prepared device: %s" % self.name)
if "args" in properties:
fault.check(self.state != State.STARTED, "Cannot change arguments of running device: %s" % self.name)
Device.configure(self, properties)
if "template" in properties:
self.setTemplate(properties["template"])
self._assignTemplate()
if "args" in properties:
self.setArgs(properties["args"])
self._assignTemplate()
self.save()示例4: interfacesAdd
def interfacesAdd(self, name, properties):
fault.check(self.state != State.STARTED, "Repy does not support adding interfaces to running VMs: %s" % self.name)
import re
fault.check(re.match("eth(\d+)", name), "Invalid interface name: %s" % name)
try:
fault.check(not self.interfaceSetGet(name), "Duplicate interface name: %s" % name)
except Interface.DoesNotExist: #pylint: disable-msg=W0702
pass
iface = Interface()
iface.name = name
iface.device = self
iface.init()
iface.save()
Device.interfaceSetAdd(self, iface)示例5: getStopTasks
def getStopTasks(self):
taskset = Device.getStopTasks(self)
stop_vnc = tasks.Task("stop-vnc", self._stopVnc, reverseFn=self._fallbackStop)
stop_vm = tasks.Task("stop-vm", self._stopVm, reverseFn=self._fallbackStop)
unassign_vnc_port = tasks.Task("unassign-vnc-port", self._unassignVncPort, reverseFn=self._fallbackStop, after=stop_vnc)
taskset.add([stop_vnc, stop_vm, unassign_vnc_port])
return self._adaptTaskset(taskset)示例6: getDestroyTasks
def getDestroyTasks(self):
taskset = Device.getDestroyTasks(self)
destroy_vm = tasks.Task("destroy-vm", self._destroyVm, reverseFn=self._fallbackDestroy)
unassign_vmid = tasks.Task("unassign-vmid", self._unassignVmid, after=destroy_vm, reverseFn=self._fallbackDestroy)
unassign_host = tasks.Task("unassign-host", self._unassignHost, after=unassign_vmid, reverseFn=self._fallbackDestroy)
taskset.add([destroy_vm, unassign_host, unassign_vmid])
return self._adaptTaskset(taskset)示例7: toDict
def toDict(self, auth):
res = Device.toDict(self, auth)
res["attrs"].update(vmid=self.getVmid(), vnc_port=self.getVncPort(), template=self.getTemplate(),
gateway4=self.getAttribute("gateway4"), gateway6=self.getAttribute("gateway6"))
if auth:
res["attrs"].update(root_password=self.getRootPassword(), vnc_password = self.vncPassword())
return res示例8: interfacesAdd
def interfacesAdd(self, name, properties): #@UnusedVariable, pylint: disable-msg=W0613
fault.check(self.state != State.STARTED, "Changes of running KVMs are not supported")
fault.check(re.match("eth(\d+)", name), "Invalid interface name: %s" % name)
iface = Interface()
try:
if self.interfaceSetGet(name):
raise fault.new("Duplicate interface name: %s" % name)
except Interface.DoesNotExist: #pylint: disable-msg=W0702
pass
iface.name = name
iface.device = self
iface.init()
if self.state == State.PREPARED:
qm.addInterface(self.host, self.getVmid(), iface.name)
iface.save()
Device.interfaceSetAdd(self, iface)示例9: interfacesAdd
def interfacesAdd(self, name, properties):
fault.check(self.state != State.STARTED, "OpenVZ does not support adding interfaces to running VMs: %s" % self.name)
import re
fault.check(re.match("eth(\d+)", name), "Invalid interface name: %s" % name)
try:
fault.check(not self.interfaceSetGet(name), "Duplicate interface name: %s" % name)
except Interface.DoesNotExist: #pylint: disable-msg=W0702
pass
iface = ConfiguredInterface()
iface.name = name
iface.device = self
iface.init()
if self.state == State.PREPARED or self.state == State.STARTED:
vzctl.addInterface(self.host, self.getVmid(), iface.name)
iface.configure(properties)
iface.save()
Device.interfaceSetAdd(self, iface)示例10: getStartTasks
def getStartTasks(self):
taskset = Device.getStartTasks(self)
start_vm = tasks.Task("start-vm", self._startVm, reverseFn=self._fallbackStop)
for iface in self.interfaceSetAll():
taskset.add(tasks.Task("start-interface-%s" % iface, self._startIface, args=(iface,), reverseFn=self._fallbackStop, after=start_vm))
assign_vnc_port = tasks.Task("assign-vnc-port", self._assignVncPort, reverseFn=self._fallbackStop)
start_vnc = tasks.Task("start-vnc", self._startVnc, reverseFn=self._fallbackStop, after=[start_vm, assign_vnc_port])
taskset.add([start_vm, assign_vnc_port, start_vnc])
return self._adaptTaskset(taskset)示例11: getPrepareTasks
def getPrepareTasks(self):
taskset = Device.getPrepareTasks(self)
assign_template = tasks.Task("assign-template", self._assignTemplate, reverseFn=self._fallbackDestroy)
assign_host = tasks.Task("assign-host", self._assignHost, reverseFn=self._fallbackDestroy)
assign_vmid = tasks.Task("assign-vmid", self._assignVmid, reverseFn=self._fallbackDestroy, after=assign_host)
create_vm = tasks.Task("create-vm", self._createVm, reverseFn=self._fallbackDestroy, after=assign_vmid)
configure_vm = tasks.Task("configure-vm", self._configureVm, reverseFn=self._fallbackDestroy, after=create_vm)
create_interfaces = tasks.Task("create-interfaces", self._createInterfaces, reverseFn=self._fallbackDestroy, after=configure_vm)
taskset.add([assign_template, assign_host, assign_vmid, create_vm, configure_vm, create_interfaces])
return self._adaptTaskset(taskset)示例12: getCapabilities
def getCapabilities(self, user):
capabilities = Device.getCapabilities(self, user)
isUser = self.topology.checkAccess(Permission.ROLE_USER, user)
capabilities["configure"].update({
"template": self.state == State.CREATED,
"args": self.state != State.STARTED,
})
capabilities.update(other={
"console": isUser and self.getVncPort() and self.state == State.STARTED
})
return capabilities示例13: getIdUsage
def getIdUsage(self, host):
ids = Device.getIdUsage(self, host)
if self.vnc_port and self.host == host:
ids["port"] = ids.get("port", set()) | set((self.vnc_port,))
if self.vmid and self.host == host:
ids["vmid"] = ids.get("vmid", set()) | set((self.vmid,))
if self.hasAttribute("migration"):
migration = self.getAttribute("migration")
if host.name in migration:
ids["vmid"] |= set((migration[host.name],))
return ids示例14: getPrepareTasks
def getPrepareTasks(self):
taskset = Device.getPrepareTasks(self)
assign_template = tasks.Task("assign-template", self._assignTemplate)
assign_host = tasks.Task("assign-host", self._assignHost)
assign_vmid = tasks.Task("assign-vmid", self._assignVmid, after=assign_host)
create_vm = tasks.Task("create-vm", self._createVm, reverseFn=self._fallbackDestroy, after=assign_vmid)
use_template = tasks.Task("use-template", self._useTemplate, reverseFn=self._fallbackDestroy, after=create_vm)
configure_vm = tasks.Task("configure-vm", self._configureVm, reverseFn=self._fallbackDestroy, after=create_vm)
for iface in self.interfaceSetAll():
taskset.add(tasks.Task("create-interface-%s" % iface.name, self._createIface, args=(iface,), reverseFn=self._fallbackDestroy, after=create_vm))
taskset.add([assign_template, assign_host, assign_vmid, create_vm, use_template, configure_vm])
return self._adaptTaskset(taskset)示例15: configure
def configure(self, properties):
if "template" in properties:
fault.check(self.state == State.CREATED, "Cannot change template of prepared device: %s" % self.name)
Device.configure(self, properties)
if "root_password" in properties:
self.setRootPassword(properties["root_password"])
if self.state == State.PREPARED or self.state == State.STARTED:
vzctl.setUserPassword(self.host, self.getVmid(), self.getRootPassword(), username="root")
if "gateway4" in properties:
self.setAttribute("gateway4", properties["gateway4"])
if self.state == State.STARTED:
self._configureRoutes()
if "gateway6" in properties:
self.setAttribute("gateway6", properties["gateway6"])
if self.state == State.STARTED:
self._configureRoutes()
if "template" in properties:
self.setTemplate(properties["template"])
self._assignTemplate()
fault.check(self.getTemplate(), "Template not found: %s" % properties["template"])
self.save()