本文整理匯總了Python中pygaze.screen.Screen類的典型用法代碼示例。如果您正苦於以下問題：Python Screen類的具體用法？Python Screen怎麽用？Python Screen使用的例子？那麽, 這裏精選的類代碼示例或許可以為您提供幫助。
在下文中一共展示了Screen類的15個代碼示例，這些例子默認根據受歡迎程度排序。您可以為喜歡或者感覺有用的代碼點讚，您的評價將有助於係統推薦出更棒的Python代碼示例。
示例1: __init__
def __init__(self, display):
"""Initiates an eyetracker dummy object, that simulates gaze position using the mouse
arguments
display -- a pygaze display.Display instance
keyword arguments
None
"""
# try to copy docstrings (but ignore it if it fails, as we do
# not need it for actual functioning of the code)
try:
copy_docstr(BaseEyeTracker, Dummy)
except:
# we're not even going to show a warning, since the copied
# docstring is useful for code editors; these load the docs
# in a non-verbose manner, so warning messages would be lost
pass
self.recording = False
self.blinking = False
self.bbpos = (settings.DISPSIZE[0]/2, settings.DISPSIZE[1]/2)
self.resolution = settings.DISPSIZE[:]
self.simulator = Mouse(disptype=settings.DISPTYPE, mousebuttonlist=None,
timeout=2, visible=False)
self.kb = Keyboard(disptype=settings.DISPTYPE, keylist=None,
timeout=None)
self.angrybeep = Sound(osc='saw',freq=100, length=100, attack=0,
decay=0, soundfile=None)
self.display = display
self.screen = Screen(disptype=settings.DISPTYPE, mousevisible=False)示例2: confirm_abort_experiment
def confirm_abort_experiment(self):
"""
Asks for confirmation before aborting the experiment. Displays a
confirmation screen, collects the response, and acts accordingly.
Exceptions:
Raises a response_error upon confirmation.
Returns:
False if no confirmation was given.
"""
# Display the confirmation screen
scr = Screen(disptype=DISPTYPE)
kb = Keyboard(timeout=5000)
yc = DISPSIZE[1]/2
xc = DISPSIZE[0]/2
ld = 40 # Line height
scr.draw_text(u'Really abort experiment?', pos=(xc, yc-3*ld))
scr.draw_text(u'Press \'Y\' to abort', pos=(xc, yc-0.5*ld))
scr.draw_text(u'Press any other key or wait 5s to go to setup', \
pos=(xc, yc+0.5*ld))
self.display.fill(scr)
self.display.show()
# process the response:
try:
key, time = kb.get_key()
except:
return False
# if confirmation, close experiment
if key == u'y':
raise Exception(u'The experiment was aborted')
self.eyelink_graphics.esc_pressed = False
return False示例3: draw_menu_screen
def draw_menu_screen(self):
"""
desc:
Draws the menu screen.
"""
self.menuscreen = Screen(disptype=settings.DISPTYPE, mousevisible=False)
self.menuscreen.draw_text(text="Eyelink calibration menu",
pos=(self.xc,self.yc-6*self.ld), center=True, font='mono',
fontsize=int(2*self.fontsize), antialias=True)
self.menuscreen.draw_text(text="%s (pygaze %s, pylink %s)" \
% (self.libeyelink.eyelink_model, pygaze.version,
pylink.__version__), pos=(self.xc,self.yc-5*self.ld), center=True,
font='mono', fontsize=int(.8*self.fontsize), antialias=True)
self.menuscreen.draw_text(text="Press C to calibrate",
pos=(self.xc, self.yc-3*self.ld), center=True, font='mono',
fontsize=self.fontsize, antialias=True)
self.menuscreen.draw_text(text="Press V to validate",
pos=(self.xc, self.yc-2*self.ld), center=True, font='mono',
fontsize=self.fontsize, antialias=True)
self.menuscreen.draw_text(text="Press A to auto-threshold",
pos=(self.xc,self.yc-1*self.ld), center=True, font='mono',
fontsize=self.fontsize, antialias=True)
self.menuscreen.draw_text(text="Press I to toggle extra info in camera image",
pos=(self.xc,self.yc-0*self.ld), center=True, font='mono',
fontsize=self.fontsize, antialias=True)
self.menuscreen.draw_text(text="Press Enter to show camera image",
pos=(self.xc,self.yc+1*self.ld), center=True, font='mono',
fontsize=self.fontsize, antialias=True)
self.menuscreen.draw_text(
text="(then change between images using the arrow keys)",
pos=(self.xc, self.yc+2*self.ld), center=True, font='mono',
fontsize=self.fontsize, antialias=True)
self.menuscreen.draw_text(text="Press Escape to abort experiment",
pos=(self.xc, self.yc+4*self.ld), center=True, font='mono',
fontsize=self.fontsize, antialias=True)
self.menuscreen.draw_text(text="Press Q to exit menu",
pos=(self.xc, self.yc+5*self.ld), center=True, font='mono',
fontsize=self.fontsize, antialias=True)示例4: set_vibration
# set up function argument types and return type
XInputSetState = xinput.XInputSetState
XInputSetState.argtypes = [ctypes.c_uint, ctypes.POINTER(XINPUT_VIBRATION)]
XInputSetState.restype = ctypes.c_uint
# define helper function
def set_vibration(controller, left_motor, right_motor):
vibration = XINPUT_VIBRATION(int(left_motor * 65535), int(right_motor * 65535))
XInputSetState(controller, ctypes.byref(vibration))
# # # # #
# PYGAZE INSTANCES
# visual
disp = Display()
scr = Screen()
# input
js = Joystick()
# # # # #
# RUN
# run until a minute has passed
t0 = timer.get_time()
t1 = timer.get_time()
text = "Test the joystick!"
while t1 - t0 < 60000:
# get joystick input
event, value, t1 = js.get_joyinput(timeout=10)
# update text示例5: __init__
def __init__(self, libeyelink, tracker):
"""
Constructor.
Arguments:
libeyelink -- A libeyelink object.
tracker -- An tracker object as returned by pylink.EyeLink().
"""
pylink.EyeLinkCustomDisplay.__init__(self)
# objects
self.libeyelink = libeyelink
self.display = libeyelink.display
self.screen = Screen(disptype=DISPTYPE, mousevisible=False)
self.kb = Keyboard(keylist=None, timeout=0)
self.mouse = Mouse(timeout=0)
if DISPTYPE == "pygame":
self.kb.set_timeout(timeout=0.001)
# If we are using a DISPTYPE that cannot be used directly, we have to
# save the camera image to a temporary file on each frame.
# if DISPTYPE not in ('pygame', 'psychopy'):
import tempfile
import os
self.tmp_file = os.path.join(tempfile.gettempdir(), "__eyelink__.jpg")
# drawing properties
self.xc = self.display.dispsize[0] / 2
self.yc = self.display.dispsize[1] / 2
self.extra_info = True
self.ld = 40 # line distance
self.fontsize = libeyelink.fontsize
self.title = ""
self.display_open = True
# menu
self.menuscreen = Screen(disptype=DISPTYPE, mousevisible=False)
self.menuscreen.draw_text(
text="Eyelink calibration menu",
pos=(self.xc, self.yc - 6 * self.ld),
center=True,
font="mono",
fontsize=int(2 * self.fontsize),
antialias=True,
)
self.menuscreen.draw_text(
text="%s (pygaze %s, pylink %s)" % (libeyelink.eyelink_model, pygaze.version, pylink.__version__),
pos=(self.xc, self.yc - 5 * self.ld),
center=True,
font="mono",
fontsize=int(0.8 * self.fontsize),
antialias=True,
)
self.menuscreen.draw_text(
text="Press C to calibrate",
pos=(self.xc, self.yc - 3 * self.ld),
center=True,
font="mono",
fontsize=self.fontsize,
antialias=True,
)
self.menuscreen.draw_text(
text="Press V to validate",
pos=(self.xc, self.yc - 2 * self.ld),
center=True,
font="mono",
fontsize=self.fontsize,
antialias=True,
)
self.menuscreen.draw_text(
text="Press A to auto-threshold",
pos=(self.xc, self.yc - 1 * self.ld),
center=True,
font="mono",
fontsize=self.fontsize,
antialias=True,
)
self.menuscreen.draw_text(
text="Press I to toggle extra info in camera image",
pos=(self.xc, self.yc - 0 * self.ld),
center=True,
font="mono",
fontsize=self.fontsize,
antialias=True,
)
self.menuscreen.draw_text(
text="Press Enter to show camera image",
pos=(self.xc, self.yc + 1 * self.ld),
center=True,
font="mono",
fontsize=self.fontsize,
antialias=True,
)
self.menuscreen.draw_text(
text="(then change between images using the arrow keys)",
pos=(self.xc, self.yc + 2 * self.ld),
center=True,
font="mono",
fontsize=self.fontsize,
antialias=True,
#.........這裏部分代碼省略.........
示例6: EyelinkGraphics
class EyelinkGraphics(custom_display):
"""
Implements the EyeLink graphics that are shown on the experimental PC, such
as the camera image, and the calibration dots. This class only implements
the drawing operations, and little to no of the logic behind the set-up,
which is implemented in PyLink.
"""
def __init__(self, libeyelink, tracker):
"""
Constructor.
Arguments:
libeyelink -- A libeyelink object.
tracker -- An tracker object as returned by pylink.EyeLink().
"""
pylink.EyeLinkCustomDisplay.__init__(self)
# objects
self.libeyelink = libeyelink
self.display = libeyelink.display
self.screen = Screen(disptype=DISPTYPE, mousevisible=False)
self.kb = Keyboard(keylist=None, timeout=0)
self.mouse = Mouse(timeout=0)
if DISPTYPE == "pygame":
self.kb.set_timeout(timeout=0.001)
# If we are using a DISPTYPE that cannot be used directly, we have to
# save the camera image to a temporary file on each frame.
# if DISPTYPE not in ('pygame', 'psychopy'):
import tempfile
import os
self.tmp_file = os.path.join(tempfile.gettempdir(), "__eyelink__.jpg")
# drawing properties
self.xc = self.display.dispsize[0] / 2
self.yc = self.display.dispsize[1] / 2
self.extra_info = True
self.ld = 40 # line distance
self.fontsize = libeyelink.fontsize
self.title = ""
self.display_open = True
# menu
self.menuscreen = Screen(disptype=DISPTYPE, mousevisible=False)
self.menuscreen.draw_text(
text="Eyelink calibration menu",
pos=(self.xc, self.yc - 6 * self.ld),
center=True,
font="mono",
fontsize=int(2 * self.fontsize),
antialias=True,
)
self.menuscreen.draw_text(
text="%s (pygaze %s, pylink %s)" % (libeyelink.eyelink_model, pygaze.version, pylink.__version__),
pos=(self.xc, self.yc - 5 * self.ld),
center=True,
font="mono",
fontsize=int(0.8 * self.fontsize),
antialias=True,
)
self.menuscreen.draw_text(
text="Press C to calibrate",
pos=(self.xc, self.yc - 3 * self.ld),
center=True,
font="mono",
fontsize=self.fontsize,
antialias=True,
)
self.menuscreen.draw_text(
text="Press V to validate",
pos=(self.xc, self.yc - 2 * self.ld),
center=True,
font="mono",
fontsize=self.fontsize,
antialias=True,
)
self.menuscreen.draw_text(
text="Press A to auto-threshold",
pos=(self.xc, self.yc - 1 * self.ld),
center=True,
font="mono",
fontsize=self.fontsize,
antialias=True,
)
self.menuscreen.draw_text(
text="Press I to toggle extra info in camera image",
pos=(self.xc, self.yc - 0 * self.ld),
center=True,
font="mono",
fontsize=self.fontsize,
antialias=True,
)
self.menuscreen.draw_text(
text="Press Enter to show camera image",
pos=(self.xc, self.yc + 1 * self.ld),
center=True,
font="mono",
fontsize=self.fontsize,
#.........這裏部分代碼省略.........
示例7: __init__
def __init__(self, display, ip='127.0.0.1', sendport=4444, receiveport= \
5555, logfile=LOGFILE, eventdetection=EVENTDETECTION, \
saccade_velocity_threshold=35, saccade_acceleration_threshold=9500, \
**args):
"""Initializes the SMItracker object
arguments
display -- a pygaze.display.Display instance
keyword arguments
ip -- internal ip address for iViewX (default =
'127.0.0.1')
sendport -- port number for iViewX sending (default = 4444)
receiveport -- port number for iViewX receiving (default = 5555)
logfile -- logfile name (string value); note that this is the
name for the SMI logfile, NOT the .idf file
(default = LOGFILE)
"""
# try to copy docstrings (but ignore it if it fails, as we do
# not need it for actual functioning of the code)
try:
copy_docstr(BaseEyeTracker, SMITracker)
except:
# we're not even going to show a warning, since the copied
# docstring is useful for code editors; these load the docs
# in a non-verbose manner, so warning messages would be lost
pass
# object properties
self.disp = display
self.screen = Screen()
self.dispsize = DISPSIZE # display size in pixels
self.screensize = SCREENSIZE # display size in cm
self.kb = Keyboard(keylist=['space', 'escape', 'q'], timeout=1)
self.errorbeep = Sound(osc='saw',freq=100, length=100)
# output file properties
self.outputfile = logfile
self.description = "experiment" # TODO: EXPERIMENT NAME
self.participant = "participant" # TODO: PP NAME
# eye tracker properties
self.connected = False
self.recording = False
self.eye_used = 0 # 0=left, 1=right, 2=binocular
self.left_eye = 0
self.right_eye = 1
self.binocular = 2
self.errdist = 2 # degrees; maximal error for drift correction
self.maxtries = 100 # number of samples obtained before giving up (for obtaining accuracy and tracker distance information, as well as starting or stopping recording)
self.prevsample = (-1,-1)
self.prevps = -1
# event detection properties
self.fixtresh = 1.5 # degrees; maximal distance from fixation start (if gaze wanders beyond this, fixation has stopped)
self.fixtimetresh = 100 # milliseconds; amount of time gaze has to linger within self.fixtresh to be marked as a fixation
self.spdtresh = saccade_velocity_threshold # degrees per second; saccade velocity threshold
self.accthresh = saccade_acceleration_threshold # degrees per second**2; saccade acceleration threshold
self.eventdetection = eventdetection
self.set_detection_type(self.eventdetection)
self.weightdist = 10 # weighted distance, used for determining whether a movement is due to measurement error (1 is ok, higher is more conservative and will result in only larger saccades to be detected)
# set logger
res = iViewXAPI.iV_SetLogger(c_int(1), c_char_p(logfile + '_SMILOG.txt'))
if res != 1:
err = errorstring(res)
raise Exception("Error in libsmi.SMItracker.__init__: failed to set logger; %s" % err)
# first logger argument is for logging type (I'm guessing these are decimal bit codes)
# LOG status bitcode
# 1 = LOG_LEVEL_BUG 00001
# 2 = LOG_LEVEL_iV_FCT 00010
# 4 = LOG_LEVEL_ETCOM 00100
# 8 = LOG_LEVEL_ALL 01000
# 16 = LOG_LEVEL_IV_COMMAND 10000
# these can be used together, using a bitwise or, e.g.: 1|2|4 (bitcode 00111)
# connect to iViewX
res = iViewXAPI.iV_Connect(c_char_p(ip), c_int(sendport), c_char_p(ip), c_int(receiveport))
if res == 1:
res = iViewXAPI.iV_GetSystemInfo(byref(systemData))
self.samplerate = systemData.samplerate
self.sampletime = 1000.0 / self.samplerate
if res != 1:
err = errorstring(res)
raise Exception("Error in libsmi.SMItracker.__init__: failed to get system information; %s" % err)
# handle connection errors
else:
self.connected = False
err = errorstring(res)
raise Exception("Error in libsmi.SMItracker.__init__: establishing connection failed; %s" % err)
# initiation report
self.log("pygaze initiation report start")
self.log("experiment: %s" % self.description)
self.log("participant: %s" % self.participant)
self.log("display resolution: %sx%s" % (self.dispsize[0],self.dispsize[1]))
self.log("display size in cm: %sx%s" % (self.screensize[0],self.screensize[1]))
self.log("samplerate: %s Hz" % self.samplerate)
#.........這裏部分代碼省略.........
示例8: SMItracker
class SMItracker(BaseEyeTracker):
"""A class for SMI eye tracker objects"""
def __init__(self, display, ip='127.0.0.1', sendport=4444, receiveport= \
5555, logfile=LOGFILE, eventdetection=EVENTDETECTION, \
saccade_velocity_threshold=35, saccade_acceleration_threshold=9500, \
**args):
"""Initializes the SMItracker object
arguments
display -- a pygaze.display.Display instance
keyword arguments
ip -- internal ip address for iViewX (default =
'127.0.0.1')
sendport -- port number for iViewX sending (default = 4444)
receiveport -- port number for iViewX receiving (default = 5555)
logfile -- logfile name (string value); note that this is the
name for the SMI logfile, NOT the .idf file
(default = LOGFILE)
"""
# try to copy docstrings (but ignore it if it fails, as we do
# not need it for actual functioning of the code)
try:
copy_docstr(BaseEyeTracker, SMITracker)
except:
# we're not even going to show a warning, since the copied
# docstring is useful for code editors; these load the docs
# in a non-verbose manner, so warning messages would be lost
pass
# object properties
self.disp = display
self.screen = Screen()
self.dispsize = DISPSIZE # display size in pixels
self.screensize = SCREENSIZE # display size in cm
self.kb = Keyboard(keylist=['space', 'escape', 'q'], timeout=1)
self.errorbeep = Sound(osc='saw',freq=100, length=100)
# output file properties
self.outputfile = logfile
self.description = "experiment" # TODO: EXPERIMENT NAME
self.participant = "participant" # TODO: PP NAME
# eye tracker properties
self.connected = False
self.recording = False
self.eye_used = 0 # 0=left, 1=right, 2=binocular
self.left_eye = 0
self.right_eye = 1
self.binocular = 2
self.errdist = 2 # degrees; maximal error for drift correction
self.maxtries = 100 # number of samples obtained before giving up (for obtaining accuracy and tracker distance information, as well as starting or stopping recording)
self.prevsample = (-1,-1)
self.prevps = -1
# event detection properties
self.fixtresh = 1.5 # degrees; maximal distance from fixation start (if gaze wanders beyond this, fixation has stopped)
self.fixtimetresh = 100 # milliseconds; amount of time gaze has to linger within self.fixtresh to be marked as a fixation
self.spdtresh = saccade_velocity_threshold # degrees per second; saccade velocity threshold
self.accthresh = saccade_acceleration_threshold # degrees per second**2; saccade acceleration threshold
self.eventdetection = eventdetection
self.set_detection_type(self.eventdetection)
self.weightdist = 10 # weighted distance, used for determining whether a movement is due to measurement error (1 is ok, higher is more conservative and will result in only larger saccades to be detected)
# set logger
res = iViewXAPI.iV_SetLogger(c_int(1), c_char_p(logfile + '_SMILOG.txt'))
if res != 1:
err = errorstring(res)
raise Exception("Error in libsmi.SMItracker.__init__: failed to set logger; %s" % err)
# first logger argument is for logging type (I'm guessing these are decimal bit codes)
# LOG status bitcode
# 1 = LOG_LEVEL_BUG 00001
# 2 = LOG_LEVEL_iV_FCT 00010
# 4 = LOG_LEVEL_ETCOM 00100
# 8 = LOG_LEVEL_ALL 01000
# 16 = LOG_LEVEL_IV_COMMAND 10000
# these can be used together, using a bitwise or, e.g.: 1|2|4 (bitcode 00111)
# connect to iViewX
res = iViewXAPI.iV_Connect(c_char_p(ip), c_int(sendport), c_char_p(ip), c_int(receiveport))
if res == 1:
res = iViewXAPI.iV_GetSystemInfo(byref(systemData))
self.samplerate = systemData.samplerate
self.sampletime = 1000.0 / self.samplerate
if res != 1:
err = errorstring(res)
raise Exception("Error in libsmi.SMItracker.__init__: failed to get system information; %s" % err)
# handle connection errors
else:
self.connected = False
err = errorstring(res)
raise Exception("Error in libsmi.SMItracker.__init__: establishing connection failed; %s" % err)
# initiation report
self.log("pygaze initiation report start")
self.log("experiment: %s" % self.description)
#.........這裏部分代碼省略.........
示例9: __init__
def __init__(self,
display,
resolution=DISPSIZE,
data_file=LOGFILENAME + ".edf",
fg_color=FGC,
bg_color=BGC,
eventdetection=EVENTDETECTION,
saccade_velocity_threshold=35,
saccade_acceleration_threshold=9500,
force_drift_correct=True,
pupil_size_mode=EYELINKPUPILSIZEMODE,
**args):
"""See pygaze._eyetracker.baseeyetracker.BaseEyeTracker"""
# try to import copy docstring (but ignore it if it fails, as we do
# not need it for actual functioning of the code)
try:
copy_docstr(BaseEyeTracker, libeyelink)
except:
# we're not even going to show a warning, since the copied
# docstring is useful for code editors; these load the docs
# in a non-verbose manner, so warning messages would be lost
pass
global _eyelink
# Make sure that we have a valid data file. The local_data_file may
# contain a folder. The eyelink_data_file is only a basename, i.e.
# without folder. The eyelink_data_file must be at most eight characters
# and end with a `.edf` extension.
self.local_data_file = data_file
self.eyelink_data_file = os.path.basename(data_file)
stem, ext = os.path.splitext(self.eyelink_data_file)
if len(stem) > 8 or ext.lower() != '.edf':
raise Exception(
"The EyeLink cannot handle filenames longer than eight "
"characters (excluding '.edf' extension).")
# properties
self.display = display
self.fontsize = 18
self.scr = Screen(disptype=DISPTYPE, mousevisible=False)
self.kb = Keyboard(keylist=["escape", "q"], timeout=1)
self.resolution = resolution
self.recording = False
self.saccade_velocity_treshold = saccade_velocity_threshold
self.saccade_acceleration_treshold = saccade_acceleration_threshold
self.eye_used = None
self.left_eye = 0
self.right_eye = 1
self.binocular = 2
self.pupil_size_mode = pupil_size_mode
self.prevsample = (-1, -1)
self.prevps = -1
# event detection properties
# degrees; maximal distance from fixation start (if gaze wanders beyond
# this, fixation has stopped)
self.fixtresh = 1.5
# milliseconds; amount of time gaze has to linger within self.fixtresh
# to be marked as a fixation
self.fixtimetresh = 100
# degrees per second; saccade velocity threshold
self.spdtresh = self.saccade_velocity_treshold
# degrees per second**2; saccade acceleration threshold
self.accthresh = self.saccade_acceleration_treshold
self.set_detection_type(eventdetection)
# weighted distance, used for determining whether a movement is due to
# measurement error (1 is ok, higher is more conservative and will
# result in only larger saccades to be detected)
self.weightdist = 10
# distance between participant and screen in cm
self.screendist = SCREENDIST
# distance between participant and screen in cm
self.screensize = SCREENSIZE
self.pixpercm = (self.resolution[0]/float(self.screensize[0]) + \
self.resolution[1]/float(self.screensize[1])) / 2.0
# only initialize eyelink once
if _eyelink == None:
try:
_eyelink = pylink.EyeLink()
except:
raise Exception(
"Error in libeyelink.libeyelink.__init__(): Failed to "
"connect to the tracker!")
# determine software version of tracker
self.tracker_software_ver = 0
self.eyelink_ver = pylink.getEYELINK().getTrackerVersion()
if self.eyelink_ver == 3:
tvstr = pylink.getEYELINK().getTrackerVersionString()
vindex = tvstr.find("EYELINK CL")
self.tracker_software_ver = int(float(tvstr[(vindex + \
len("EYELINK CL")):].strip()))
if self.eyelink_ver == 1:
self.eyelink_model = 'EyeLink I'
elif self.eyelink_ver == 2:
self.eyelink_model = 'EyeLink II'
elif self.eyelink_ver == 3:
self.eyelink_model = 'EyeLink 1000'
else:
#.........這裏部分代碼省略.........
示例10: __init__
def __init__(self, libeyelink, tracker):
"""
Constructor.
Arguments:
libeyelink -- A libeyelink object.
tracker -- An tracker object as returned by pylink.EyeLink().
"""
pylink.EyeLinkCustomDisplay.__init__(self)
# objects
self.libeyelink = libeyelink
self.display = libeyelink.display
self.screen = Screen(disptype=settings.DISPTYPE, mousevisible=False)
self.kb = Keyboard(keylist=None, timeout=0)
self.mouse = Mouse(timeout=0)
if settings.DISPTYPE == "pygame":
self.kb.set_timeout(timeout=0.001)
# If we are using a DISPTYPE that cannot be used directly, we have to
# save the camera image to a temporary file on each frame.
# if DISPTYPE not in ('pygame', 'psychopy'):
import tempfile
import os
self.tmp_file = os.path.join(tempfile.gettempdir(), "__eyelink__.jpg")
# drawing properties
self.xc = self.display.dispsize[0] / 2
self.yc = self.display.dispsize[1] / 2
self.extra_info = True
self.ld = 40 # line distance
self.fontsize = libeyelink.fontsize
self.title = ""
self.display_open = True
self.draw_menu_screen()
# beeps
self.__target_beep__ = Sound(osc="sine", freq=440, length=50, attack=0, decay=0, soundfile=None)
self.__target_beep__done__ = Sound(osc="sine", freq=880, length=200, attack=0, decay=0, soundfile=None)
self.__target_beep__error__ = Sound(osc="sine", freq=220, length=200, attack=0, decay=0, soundfile=None)
# Colors
self.color = {
pylink.CR_HAIR_COLOR: pygame.Color("white"),
pylink.PUPIL_HAIR_COLOR: pygame.Color("white"),
pylink.PUPIL_BOX_COLOR: pygame.Color("green"),
pylink.SEARCH_LIMIT_BOX_COLOR: pygame.Color("red"),
pylink.MOUSE_CURSOR_COLOR: pygame.Color("red"),
"font": pygame.Color("white"),
}
# Font
pygame.font.init()
self.font = pygame.font.SysFont("Courier New", 11)
# further properties
self.state = None
self.pal = None
self.size = (0, 0)
self.set_tracker(tracker)
self.last_mouse_state = -1
self.bit64 = "64bit" in platform.architecture()
self.imagebuffer = self.new_array()示例11: Display
# # # # #
# directory stuff
DIR = os.path.split(os.path.abspath(__file__))[0]
soundfile = os.path.join(DIR, 'bark.ogg')
imagefile = os.path.join(DIR, 'kitten.png')
# # # # #
# create instances
# initialize the display
disp = Display()
# initialize a screen
scr = Screen()
# initialize a keyboard
kb = Keyboard(keylist=['space'],timeout=None)
# initialize a mouse
mouse = Mouse(mousebuttonlist=None, timeout=None)
# initialize a sound
snd = Sound(osc='sine', freq=4400, length=3000)
sounds = {
'a sine wave (slightly oscillating)':Sound(osc='sine', freq=440, length=5000, attack=1000, decay=1000),
'a saw wave':Sound(osc='saw', freq=880, length=5000, attack=0, decay=0),
'a square wave':Sound(osc='square', freq=1760, length=5000, attack=0, decay=0),
'white noise':Sound(osc='whitenoise'),
'soundfile':Sound(soundfile=soundfile)示例12: Display
# PyGaze
from constants import *
from pygaze.display import Display
from pygaze.screen import Screen
from pygaze.eyetracker import EyeTracker
from pygaze.keyboard import Keyboard
from pygaze.libtime import clock
# # # # #
# SETUP
# visuals
disp = Display()
scr = Screen()
# input
tracker = EyeTracker(disp)
kb = Keyboard(keylist=None, timeout=None)
# calibrate
tracker.calibrate()
# starting screen
scr.clear()
scr.draw_text(text="Press Space to start")
disp.fill(scr)
disp.show()
kb.get_key(keylist=['space'], timeout=None, flush=True)示例13: __init__
def __init__(self, display, tracker):
"""
Constructor.
Arguments:
display -- A PyGaze Display object.
tracker -- An tracker object as returned by pylink.EyeLink().
"""
pylink.EyeLinkCustomDisplay.__init__(self)
# objects
self.display = display
self.screen = Screen(disptype=DISPTYPE, mousevisible=False)
self.kb = Keyboard(keylist=None, timeout=1)
if DISPTYPE == 'pygame':
self.kb.set_timeout(timeout=0.001)
# If we are using a DISPTYPE that cannot be used directly, we have to
# save the camera image to a temporary file on each frame.
#if DISPTYPE not in ('pygame', 'psychopy'):
import tempfile
import os
self.tmp_file = os.path.join(tempfile.gettempdir(), \
'__eyelink__.jpg')
# drawing properties
self.xc = self.display.dispsize[0]/2
self.yc = self.display.dispsize[1]/2
self.ld = 40 # line distance
# menu
self.menuscreen = Screen(disptype=DISPTYPE, mousevisible=False)
self.menuscreen.draw_text(text="== Eyelink calibration menu ==", pos= \
(self.xc,self.yc-5*self.ld), center=True, font='mono', fontsize= \
12, antialias=True)
self.menuscreen.draw_text(text="Press C to calibrate", pos=(self.xc, \
self.yc-3*self.ld), center=True, font='mono', fontsize=12, \
antialias=True)
self.menuscreen.draw_text(text="Press V to validate", pos=(self.xc, \
self.yc-2*self.ld), center=True, font='mono', fontsize=12, \
antialias=True)
self.menuscreen.draw_text(text="Press A to auto-threshold", pos=( \
self.xc,self.yc-1*self.ld), center=True, font='mono', fontsize=12, \
antialias=True)
self.menuscreen.draw_text(text="Press Enter to show camera image", \
pos=(self.xc,self.yc+1*self.ld), center=True, font='mono', \
fontsize=12, antialias=True)
self.menuscreen.draw_text(text= \
"(then change between images using the arrow keys)", pos=(self.xc, \
self.yc+2*self.ld), center=True, font='mono', fontsize=12, \
antialias=True)
self.menuscreen.draw_text(text="Press Q to exit menu", pos=(self.xc, \
self.yc+5*self.ld), center=True, font='mono', fontsize=12, \
antialias=True)
# beeps
self.__target_beep__ = Sound(osc='sine', freq=440, length=50, attack= \
0, decay=0, soundfile=None)
self.__target_beep__done__ = Sound(osc='sine', freq=880, length=200, \
attack=0, decay=0, soundfile=None)
self.__target_beep__error__ = Sound(osc='sine', freq=220, length=200, \
attack=0, decay=0, soundfile=None)
# further properties
self.state = None
self.imagebuffer = array.array('l')
self.pal = None
self.size = (0,0)
self.set_tracker(tracker)
self.last_mouse_state = -1示例14: EyelinkGraphics
class EyelinkGraphics(custom_display):
"""
Implements the EyeLink graphics that are shown on the experimental PC, such
as the camera image, and the calibration dots. This class only implements
the drawing operations, and little to no of the logic behind the set-up,
which is implemented in PyLink.
"""
def __init__(self, display, tracker):
"""
Constructor.
Arguments:
display -- A PyGaze Display object.
tracker -- An tracker object as returned by pylink.EyeLink().
"""
pylink.EyeLinkCustomDisplay.__init__(self)
# objects
self.display = display
self.screen = Screen(disptype=DISPTYPE, mousevisible=False)
self.kb = Keyboard(keylist=None, timeout=1)
if DISPTYPE == 'pygame':
self.kb.set_timeout(timeout=0.001)
# If we are using a DISPTYPE that cannot be used directly, we have to
# save the camera image to a temporary file on each frame.
#if DISPTYPE not in ('pygame', 'psychopy'):
import tempfile
import os
self.tmp_file = os.path.join(tempfile.gettempdir(), \
'__eyelink__.jpg')
# drawing properties
self.xc = self.display.dispsize[0]/2
self.yc = self.display.dispsize[1]/2
self.ld = 40 # line distance
# menu
self.menuscreen = Screen(disptype=DISPTYPE, mousevisible=False)
self.menuscreen.draw_text(text="== Eyelink calibration menu ==", pos= \
(self.xc,self.yc-5*self.ld), center=True, font='mono', fontsize= \
12, antialias=True)
self.menuscreen.draw_text(text="Press C to calibrate", pos=(self.xc, \
self.yc-3*self.ld), center=True, font='mono', fontsize=12, \
antialias=True)
self.menuscreen.draw_text(text="Press V to validate", pos=(self.xc, \
self.yc-2*self.ld), center=True, font='mono', fontsize=12, \
antialias=True)
self.menuscreen.draw_text(text="Press A to auto-threshold", pos=( \
self.xc,self.yc-1*self.ld), center=True, font='mono', fontsize=12, \
antialias=True)
self.menuscreen.draw_text(text="Press Enter to show camera image", \
pos=(self.xc,self.yc+1*self.ld), center=True, font='mono', \
fontsize=12, antialias=True)
self.menuscreen.draw_text(text= \
"(then change between images using the arrow keys)", pos=(self.xc, \
self.yc+2*self.ld), center=True, font='mono', fontsize=12, \
antialias=True)
self.menuscreen.draw_text(text="Press Q to exit menu", pos=(self.xc, \
self.yc+5*self.ld), center=True, font='mono', fontsize=12, \
antialias=True)
# beeps
self.__target_beep__ = Sound(osc='sine', freq=440, length=50, attack= \
0, decay=0, soundfile=None)
self.__target_beep__done__ = Sound(osc='sine', freq=880, length=200, \
attack=0, decay=0, soundfile=None)
self.__target_beep__error__ = Sound(osc='sine', freq=220, length=200, \
attack=0, decay=0, soundfile=None)
# further properties
self.state = None
self.imagebuffer = array.array('l')
self.pal = None
self.size = (0,0)
self.set_tracker(tracker)
self.last_mouse_state = -1
def set_tracker(self, tracker):
"""
Connects the tracker to the graphics environment.
Arguments:
tracker -- An tracker object as returned by pylink.EyeLink().
"""
self.tracker = tracker
self.tracker_version = tracker.getTrackerVersion()
if self.tracker_version >= 3:
self.tracker.sendCommand("enable_search_limits=YES")
self.tracker.sendCommand("track_search_limits=YES")
self.tracker.sendCommand("autothreshold_click=YES")
self.tracker.sendCommand("autothreshold_repeat=YES")
self.tracker.sendCommand("enable_camera_position_detect=YES")
def setup_cal_display(self):
"""
Sets up the initial calibration display, which contains a menu with
instructions.
#.........這裏部分代碼省略.........
示例15: Display
# # # # #
# directory stuff
DIR = os.path.split(os.path.abspath(__file__))[0]
soundfile = os.path.join(DIR, 'bark.ogg')
imagefile = os.path.join(DIR, 'kitten.png')
# # # # #
# create instances
# initialize the display
disp = Display()
# initialize a screen
scr = Screen()
# initialize an EyeTracker
tracker = EyeTracker(disp)
# initialize a keyboard
kb = Keyboard(keylist=['space'],timeout=None)
# initialize a sound
snd = Sound(soundfile=soundfile)
# initialize a Timer
timer = Time()
# create a new logfile
log = Logfile(filename="test")