Python EditorTabWidget.currentWidget方法代碼示例

本文整理匯總了Python中console_editor.EditorTabWidget.currentWidget方法的典型用法代碼示例。如果您正苦於以下問題：Python EditorTabWidget.currentWidget方法的具體用法？Python EditorTabWidget.currentWidget怎麽用？Python EditorTabWidget.currentWidget使用的例子？那麽, 這裏精選的方法代碼示例或許可以為您提供幫助。您也可以進一步了解該方法所在類console_editor.EditorTabWidget的用法示例。

在下文中一共展示了EditorTabWidget.currentWidget方法的3個代碼示例，這些例子默認根據受歡迎程度排序。您可以為喜歡或者感覺有用的代碼點讚，您的評價將有助於係統推薦出更棒的Python代碼示例。

示例1: PythonConsoleWidget

# 需要導入模塊: from console_editor import EditorTabWidget [as 別名]
# 或者: from console_editor.EditorTabWidget import currentWidget [as 別名]

#.........這裏部分代碼省略.........

        #self.tabEditorWidget.newTabEditor(tabName='first', filename=None)

        ##------------ Signal -------------------------------

        self.findTextButton.toggled.connect(self.findTextEditor)
        self.objectListButton.toggled.connect(self.toggleObjectListWidget)
        self.commentEditorButton.triggered.connect(self.commentCode)
        self.uncommentEditorButton.triggered.connect(self.uncommentCode)
        self.runScriptEditorButton.triggered.connect(self.runScriptEditor)
        self.cutEditorButton.triggered.connect(self.cutEditor)
        self.copyEditorButton.triggered.connect(self.copyEditor)
        self.pasteEditorButton.triggered.connect(self.pasteEditor)
        self.showEditorButton.toggled.connect(self.toggleEditor)
        self.clearButton.triggered.connect(self.shellOut.clearConsole)
        self.optionsButton.triggered.connect(self.openSettings)
        self.loadProcessingButton.triggered.connect(self.processing)
        self.loadQtCoreButton.triggered.connect(self.qtCore)
        self.loadQtGuiButton.triggered.connect(self.qtGui)
        self.runButton.triggered.connect(self.shell.entered)
        self.openFileButton.triggered.connect(self.openScriptFile)
        self.openInEditorButton.triggered.connect(self.openScriptFileExtEditor)
        self.saveFileButton.triggered.connect(self.saveScriptFile)
        self.saveAsFileButton.triggered.connect(self.saveAsScriptFile)
        self.helpButton.triggered.connect(self.openHelp)
        self.connect(self.listClassMethod, SIGNAL('itemClicked(QTreeWidgetItem*, int)'),
                     self.onClickGoToLine)
        self.lineEditFind.returnPressed.connect(self._findText)
        self.findNextButton.clicked.connect(self._findNext)
        self.findPrevButton.clicked.connect(self._findPrev)
        self.lineEditFind.textChanged.connect(self._textFindChanged)

    def _findText(self):
        self.tabEditorWidget.currentWidget().newEditor.findText(True)

    def _findNext(self):
        self.tabEditorWidget.currentWidget().newEditor.findText(True)

    def _findPrev(self):
        self.tabEditorWidget.currentWidget().newEditor.findText(False)

    def _textFindChanged(self):
        if self.lineEditFind.text():
            self.findNextButton.setEnabled(True)
            self.findPrevButton.setEnabled(True)
        else:
            self.lineEditFind.setStyleSheet('')
            self.findNextButton.setEnabled(False)
            self.findPrevButton.setEnabled(False)

    def onClickGoToLine(self, item, column):
        tabEditor = self.tabEditorWidget.currentWidget().newEditor
        if item.text(1) == 'syntaxError':
            check = tabEditor.syntaxCheck(fromContextMenu=False)
            if check and not tabEditor.isReadOnly():
                self.tabEditorWidget.currentWidget().save()
            return
        linenr = int(item.text(1))
        itemName = str(item.text(0))
        charPos = itemName.find(' ')
        if charPos != -1:
            objName = itemName[0:charPos]
        else:
            objName = itemName
        tabEditor.goToLine(objName, linenr)

開發者ID:Geoneer，項目名稱:QGIS，代碼行數:69，代碼來源:console.py

示例2: PythonConsoleWidget

# 需要導入模塊: from console_editor import EditorTabWidget [as 別名]
# 或者: from console_editor.EditorTabWidget import currentWidget [as 別名]

#.........這裏部分代碼省略.........
        #self.tabEditorWidget.newTabEditor(tabName='first', filename=None)

        ##------------ Signal -------------------------------

        self.findTextButton.toggled.connect(self.findTextEditor)
        self.objectListButton.toggled.connect(self.toggleObjectListWidget)
        self.commentEditorButton.triggered.connect(self.commentCode)
        self.uncommentEditorButton.triggered.connect(self.uncommentCode)
        self.runScriptEditorButton.triggered.connect(self.runScriptEditor)
        self.cutEditorButton.triggered.connect(self.cutEditor)
        self.copyEditorButton.triggered.connect(self.copyEditor)
        self.pasteEditorButton.triggered.connect(self.pasteEditor)
        self.showEditorButton.toggled.connect(self.toggleEditor)
        self.clearButton.triggered.connect(self.shellOut.clearConsole)
        self.optionsButton.triggered.connect(self.openSettings)
        self.loadSextanteButton.triggered.connect(self.sextante)
        self.loadQtCoreButton.triggered.connect(self.qtCore)
        self.loadQtGuiButton.triggered.connect(self.qtGui)
        self.runButton.triggered.connect(self.shell.entered)
        self.openFileButton.triggered.connect(self.openScriptFile)
        self.saveFileButton.triggered.connect(self.saveScriptFile)
        self.saveAsFileButton.triggered.connect(self.saveAsScriptFile)
        self.helpButton.triggered.connect(self.openHelp)
        self.connect(self.options.buttonBox, SIGNAL("accepted()"),
                     self.prefChanged)
        self.connect(self.listClassMethod, SIGNAL('itemClicked(QTreeWidgetItem*, int)'),
                     self.onClickGoToLine)
        self.lineEditFind.returnPressed.connect(self._findText)
        self.findNextButton.clicked.connect(self._findNext)
        self.findPrevButton.clicked.connect(self._findPrev)
        self.lineEditFind.textChanged.connect(self._textFindChanged)

    def _findText(self):
        self.tabEditorWidget.currentWidget().newEditor.findText()

    def _findNext(self):
        self.tabEditorWidget.currentWidget().newEditor.findText()

    def _findPrev(self):
        self.tabEditorWidget.currentWidget().newEditor.findText(True)
        self.tabEditorWidget.currentWidget().newEditor.findNext()

    def _textFindChanged(self):
        if not self.lineEditFind.text().isEmpty():
            self.findNextButton.setEnabled(True)
            self.findPrevButton.setEnabled(True)
        else:
            self.findNextButton.setEnabled(False)
            self.findPrevButton.setEnabled(False)

    def onClickGoToLine(self, item, column):
        linenr = int(item.text(1))
        itemName = str(item.text(0))
        charPos = itemName.find(' ')
        if charPos != -1:
            objName = itemName[0:charPos]
        else:
            objName = itemName
        self.tabEditorWidget.currentWidget().newEditor.goToLine(objName, linenr)

    def sextante(self):
       self.shell.commandConsole('sextante')

    def qtCore(self):
       self.shell.commandConsole('qtCore')

開發者ID:cyclingzealot，項目名稱:Quantum-GIS，代碼行數:69，代碼來源:console.py

示例3: PythonConsoleWidget

# 需要導入模塊: from console_editor import EditorTabWidget [as 別名]
# 或者: from console_editor.EditorTabWidget import currentWidget [as 別名]

#.........這裏部分代碼省略.........
        self.cutEditorButton.triggered.connect(self.cutEditor)
        self.copyEditorButton.triggered.connect(self.copyEditor)
        self.pasteEditorButton.triggered.connect(self.pasteEditor)
        self.showEditorButton.toggled.connect(self.toggleEditor)
        self.clearButton.triggered.connect(self.shellOut.clearConsole)
        self.optionsButton.triggered.connect(self.openSettings)
        self.loadSextanteButton.triggered.connect(self.sextante)
        self.loadQtCoreButton.triggered.connect(self.qtCore)
        self.loadQtGuiButton.triggered.connect(self.qtGui)
        self.runButton.triggered.connect(self.shell.entered)
        self.openFileButton.triggered.connect(self.openScriptFile)
        self.saveFileButton.triggered.connect(self.saveScriptFile)
        self.saveAsFileButton.triggered.connect(self.saveAsScriptFile)
        self.helpButton.triggered.connect(self.openHelp)
        QObject.connect(self.options.buttonBox, SIGNAL("accepted()"),
                        self.prefChanged)

    def sextante(self):
       self.shell.commandConsole('sextante')

    def qtCore(self):
       self.shell.commandConsole('qtCore')

    def qtGui(self):
       self.shell.commandConsole('qtGui')

    def toggleEditor(self, checked):
        self.widgetEditor.show() if checked else self.widgetEditor.hide()
        self.openFileButton.setEnabled(checked)
        self.saveFileButton.setEnabled(checked)
        self.saveAsFileButton.setEnabled(checked)

    def pasteEditor(self):
        self.tabEditorWidget.currentWidget().newEditor.paste()

    def cutEditor(self):
        self.tabEditorWidget.currentWidget().newEditor.cut()

    def copyEditor(self):
        self.tabEditorWidget.currentWidget().newEditor.copy()

    def runScriptEditor(self):
        self.tabEditorWidget.currentWidget().newEditor.runScriptCode()

    def commentCode(self):
        self.tabEditorWidget.currentWidget().newEditor.commentEditorCode(True)

    def uncommentCode(self):
        self.tabEditorWidget.currentWidget().newEditor.commentEditorCode(False)

#    def openScriptFile(self):
#       settings = QSettings()
#       lastDirPath = settings.value("pythonConsole/lastDirPath").toString()
#       scriptFile = QFileDialog.getOpenFileName(
#                       self, "Open File", lastDirPath, "Script file (*.py)")
#       if scriptFile.isEmpty() == False:
#           oF = open(scriptFile, 'r')
#           listScriptFile = []
#           for line in oF:
#               if line != "\n":
#                   listScriptFile.append(line)
#           self.shell.insertTextFromFile(listScriptFile)
#    
#           lastDirPath = QFileInfo(scriptFile).path()
#           settings.setValue("pythonConsole/lastDirPath", QVariant(scriptFile))
#

開發者ID:PepSalehi，項目名稱:Quantum-GIS，代碼行數:70，代碼來源:console.py

注：本文中的console_editor.EditorTabWidget.currentWidget方法示例由純淨天空整理自Github/MSDocs等開源代碼及文檔管理平台，相關代碼片段篩選自各路編程大神貢獻的開源項目，源碼版權歸原作者所有，傳播和使用請參考對應項目的License；未經允許，請勿轉載。