當前位置: 首頁>>代碼示例>>Python>>正文

Python GCode.importDXF方法代碼示例

本文整理匯總了Python中CNC.GCode.importDXF方法的典型用法代碼示例。如果您正苦於以下問題：Python GCode.importDXF方法的具體用法？Python GCode.importDXF怎麽用？Python GCode.importDXF使用的例子？那麽, 這裏精選的方法代碼示例或許可以為您提供幫助。您也可以進一步了解該方法所在類CNC.GCode的用法示例。


在下文中一共展示了GCode.importDXF方法的3個代碼示例，這些例子默認根據受歡迎程度排序。您可以為喜歡或者感覺有用的代碼點讚，您的評價將有助於係統推薦出更棒的Python代碼示例。

示例1: __init__

# 需要導入模塊: from CNC import GCode [as 別名]
# 或者: from CNC.GCode import importDXF [as 別名]

#.........這裏部分代碼省略.........
	def _loadRecent1(self,event): self.loadRecent(1)
	def _loadRecent2(self,event): self.loadRecent(2)
	def _loadRecent3(self,event): self.loadRecent(3)
	def _loadRecent4(self,event): self.loadRecent(4)
	def _loadRecent5(self,event): self.loadRecent(5)
	def _loadRecent6(self,event): self.loadRecent(6)
	def _loadRecent7(self,event): self.loadRecent(7)
	def _loadRecent8(self,event): self.loadRecent(8)
	def _loadRecent9(self,event): self.loadRecent(9)

	#----------------------------------------------------------------------
	def _saveConfigFile(self, filename=None):
		if filename is None:
			filename = self.gcode.filename
		Utils.setStr("File", "dir",   os.path.dirname(os.path.abspath(filename)))
		Utils.setStr("File", "file",  os.path.basename(filename))
		Utils.setStr("File", "probe", os.path.basename(self.gcode.probe.filename))

	#----------------------------------------------------------------------
	# Load a file into editor
	#----------------------------------------------------------------------
	def load(self, filename):
		fn,ext = os.path.splitext(filename)
		if ext==".probe":
			if filename is not None:
				self.gcode.probe.filename = filename
				self._saveConfigFile()
			self.gcode.probe.load(filename)
		elif ext == ".stl":
			# FIXME: implements solid import???
			pass
		elif ext==".dxf":
			self.gcode.init()
			self.gcode.importDXF(filename)
			self._saveConfigFile(filename)
		else:
			self.gcode.load(filename)
			self._saveConfigFile()
		Utils.addRecent(filename)

	#----------------------------------------------------------------------
	def save(self, filename):
		fn,ext = os.path.splitext(filename)
		if ext == ".probe":
			# save probe
			if filename is not None:
				self.gcode.probe.filename = filename
				self._saveConfigFile()
			if not self.gcode.probe.isEmpty():
				self.gcode.probe.save()
		elif ext == ".stl":
			#save probe as STL
			self.gcode.probe.saveAsSTL(filename)
		elif ext == ".dxf":
			return self.gcode.saveDXF(filename)
		else:
			if filename is not None:
				self.gcode.filename = filename
				self._saveConfigFile()
			Utils.addRecent(self.gcode.filename)
			return self.gcode.save()

	#----------------------------------------------------------------------
	def saveAll(self, event=None):
		if self.gcode.filename:
			self.save(self.gcode.filename)
開發者ID:Janecpekmutt，項目名稱:bCNC，代碼行數:70，代碼來源:Sender.py

示例2: __init__

# 需要導入模塊: from CNC import GCode [as 別名]
# 或者: from CNC.GCode import importDXF [as 別名]

#.........這裏部分代碼省略.........
	def _loadRecent5(self,event): self.loadRecent(5)
	def _loadRecent6(self,event): self.loadRecent(6)
	def _loadRecent7(self,event): self.loadRecent(7)
	def _loadRecent8(self,event): self.loadRecent(8)
	def _loadRecent9(self,event): self.loadRecent(9)

	#----------------------------------------------------------------------
	def _saveConfigFile(self, filename=None):
		if filename is None:
			filename = self.gcode.filename
		Utils.setUtf("File", "dir",   os.path.dirname(os.path.abspath(filename)))
		Utils.setUtf("File", "file",  os.path.basename(filename))
		Utils.setUtf("File", "probe", os.path.basename(self.gcode.probe.filename))

	#----------------------------------------------------------------------
	# Load a file into editor
	#----------------------------------------------------------------------
	def load(self, filename):
		fn,ext = os.path.splitext(filename)
		ext = ext.lower()
		if ext==".probe":
			if filename is not None:
				self.gcode.probe.filename = filename
				self._saveConfigFile()
			self.gcode.probe.load(filename)
		elif ext == ".orient":
			# save orientation file
			self.gcode.orient.load(filename)
		elif ext == ".stl":
			# FIXME: implements solid import???
			pass
		elif ext==".dxf":
			self.gcode.init()
			self.gcode.importDXF(filename)
			self._saveConfigFile(filename)
		else:
			self.gcode.load(filename)
			self._saveConfigFile()
		Utils.addRecent(filename)

	#----------------------------------------------------------------------
	def save(self, filename):
		fn,ext = os.path.splitext(filename)
		ext = ext.lower()
		if ext == ".probe":
			# save probe
			if filename is not None:
				self.gcode.probe.filename = filename
				self._saveConfigFile()
			if not self.gcode.probe.isEmpty():
				self.gcode.probe.save()
		elif ext == ".orient":
			# save orientation file
			self.gcode.orient.save(filename)
		elif ext == ".stl":
			#save probe as STL
			self.gcode.probe.saveAsSTL(filename)
		elif ext == ".dxf":
			return self.gcode.saveDXF(filename)
		else:
			if filename is not None:
				self.gcode.filename = filename
				self._saveConfigFile()
			Utils.addRecent(self.gcode.filename)
			return self.gcode.save()
開發者ID:YUESS，項目名稱:bCNC，代碼行數:69，代碼來源:Sender.py

示例3: __init__

# 需要導入模塊: from CNC import GCode [as 別名]
# 或者: from CNC.GCode import importDXF [as 別名]

#.........這裏部分代碼省略.........
	def _loadRecent8(self,event): self.loadRecent(8)

	# ----------------------------------------------------------------------
	def _loadRecent9(self,event): self.loadRecent(9)

	#----------------------------------------------------------------------
	def _saveConfigFile(self, filename=None):
		if filename is None:
			filename = self.gcode.filename
		Utils.setUtf("File", "dir",   os.path.dirname(os.path.abspath(filename)))
		Utils.setUtf("File", "file",  os.path.basename(filename))
		Utils.setUtf("File", "probe", os.path.basename(self.gcode.probe.filename))

	#----------------------------------------------------------------------
	# Load a file into editor
	#----------------------------------------------------------------------
	def load(self, filename):
		fn,ext = os.path.splitext(filename)
		ext = ext.lower()
		if ext==".probe":
			if filename is not None:
				self.gcode.probe.filename = filename
				self._saveConfigFile()
			self.gcode.probe.load(filename)
		elif ext == ".orient":
			# save orientation file
			self.gcode.orient.load(filename)
		elif ext == ".stl" or ext == ".ply":
			# FIXME: implements solid import???
			import tkMessageBox
			tkMessageBox.showinfo("Open 3D Mesh", "Importing of 3D mesh files in .STL and .PLY format is supported by SliceMesh plugin.\nYou can find it in Tools->SliceMesh.")
		elif ext==".dxf":
			self.gcode.init()
			self.gcode.importDXF(filename)
			self._saveConfigFile(filename)
		elif ext==".svg":
			self.gcode.init()
			self.gcode.importSVG(filename)
			self._saveConfigFile(filename)
		else:
			self.gcode.load(filename)
			self._saveConfigFile()
		Utils.addRecent(filename)

	#----------------------------------------------------------------------
	def save(self, filename):
		fn,ext = os.path.splitext(filename)
		ext = ext.lower()
		if ext == ".probe" or ext == ".xyz":
			# save probe
			if not self.gcode.probe.isEmpty():
				self.gcode.probe.save(filename)
			if filename is not None:
				self._saveConfigFile()
		elif ext == ".orient":
			# save orientation file
			self.gcode.orient.save(filename)
		elif ext == ".stl":
			#save probe as STL
			self.gcode.probe.saveAsSTL(filename)
		elif ext == ".dxf":
			return self.gcode.saveDXF(filename)
		elif ext == ".svg":
			return self.gcode.saveSVG(filename)
		elif ext == ".txt":
			#save gcode as txt (only enabled blocks and no bCNC metadata)
開發者ID:onekk，項目名稱:bCNC，代碼行數:70，代碼來源:Sender.py


注：本文中的CNC.GCode.importDXF方法示例由純淨天空整理自Github/MSDocs等開源代碼及文檔管理平台，相關代碼片段篩選自各路編程大神貢獻的開源項目，源碼版權歸原作者所有，傳播和使用請參考對應項目的License；未經允許，請勿轉載。