本文整理匯總了Python中unicorn.UC_MODE_ARM屬性的典型用法代碼示例。如果您正苦於以下問題：Python unicorn.UC_MODE_ARM屬性的具體用法？Python unicorn.UC_MODE_ARM怎麽用？Python unicorn.UC_MODE_ARM使用的例子？那麽, 這裏精選的屬性代碼示例或許可以為您提供幫助。您也可以進一步了解該屬性所在類unicorn的用法示例。
在下文中一共展示了unicorn.UC_MODE_ARM屬性的5個代碼示例，這些例子默認根據受歡迎程度排序。您可以為喜歡或者感覺有用的代碼點讚，您的評價將有助於係統推薦出更棒的Python代碼示例。
示例1: __init__
# 需要導入模塊: import unicorn [as 別名]
# 或者: from unicorn import UC_MODE_ARM [as 別名]
def __init__(self, trace=True, sca_mode=False, local_vars={}):
super().__init__(trace, sca_mode)
self.emu = uc.Uc(uc.UC_ARCH_ARM, uc.UC_MODE_ARM)
self.disasm = cs.Cs(cs.CS_ARCH_ARM, cs.CS_MODE_ARM | cs.CS_MODE_THUMB)
self.disasm.detail = True
self.word_size = 4
self.endianness = "little"
self.page_size = self.emu.query(uc.UC_QUERY_PAGE_SIZE)
self.page_shift = self.page_size.bit_length() - 1
self.pc = uc.arm_const.UC_ARM_REG_PC
known_regs = [i[len('UC_ARM_REG_'):] for i in dir(uc.arm_const) if '_REG' in i]
self.reg_map = {r.lower(): getattr(uc.arm_const, 'UC_ARM_REG_'+r) for r in known_regs}
self.stubbed_functions = local_vars
self.setup(sca_mode)
self.reset_stack() 示例2: __init__
# 需要導入模塊: import unicorn [as 別名]
# 或者: from unicorn import UC_MODE_ARM [as 別名]
def __init__(self, trace=True, sca_mode=False, local_vars=[]):
super().__init__(trace, sca_mode)
self.emu = uc.Uc(uc.UC_ARCH_ARM64, uc.UC_MODE_ARM)
self.disasm = cs.Cs(cs.CS_ARCH_ARM64, cs.CS_MODE_ARM)
self.disasm.detail = True
self.word_size = 8
self.endianness = "little"
self.page_size = self.emu.query(uc.UC_QUERY_PAGE_SIZE)
self.page_shift = self.page_size.bit_length() - 1
self.pc = uc.arm64_const.UC_ARM64_REG_PC
known_regs = [i[len('UC_ARM64_REG_'):] for i in dir(uc.arm64_const) if '_REG' in i]
self.reg_map = {r.lower(): getattr(uc.arm64_const, 'UC_ARM64_REG_'+r) for r in known_regs}
self.stubbed_functions = local_vars
self.setup(sca_mode)
self.reset_stack() 示例3: __init__
# 需要導入模塊: import unicorn [as 別名]
# 或者: from unicorn import UC_MODE_ARM [as 別名]
def __init__(self):
Emulator.__init__(self, "ARM64",
unicorn.UC_ARCH_ARM64,
unicorn.UC_MODE_ARM,
"pc",
64,
["sp", "cpsr"])
self.syscall_regnames = map(lambda x: "x%d" % x, range(0, 8)) + ["x8",
"pc"]
self.stackbot = "fp"
self.stacktop = "sp"
self.syscall_reg = "x8" 示例4: __init__
# 需要導入模塊: import unicorn [as 別名]
# 或者: from unicorn import UC_MODE_ARM [as 別名]
def __init__(self):
super(Arm, self).__init__()
self.unicorn_arch = unicorn.UC_ARCH_ARM
self.unicorn_mode = unicorn.UC_MODE_ARM
self.capstone_arch = capstone.CS_ARCH_ARM
self.capstone_mode = capstone.CS_MODE_ARM 示例5: __init__
# 需要導入模塊: import unicorn [as 別名]
# 或者: from unicorn import UC_MODE_ARM [as 別名]
def __init__(self, controller, r, stage):
# controller.gdb_print("creating longwrite break\n")
self.emptywrite = {'start': None,
'end': None,
'pc': None}
self.writeinfo = self.emptywrite
self.breakaddr = r['breakaddr']
self.contaddr = r['contaddr']
self.writeaddr = r['writeaddr']
self.thumb = r['thumb']
r2.gets(stage.elf, "s 0x%x" % self.writeaddr)
if self.thumb:
self.emu = unicorn.Uc(unicorn.UC_ARCH_ARM, unicorn.UC_MODE_THUMB)
r2.gets(stage.elf, "ahb 16")
r2.gets(stage.elf, "e asm.bits=16")
self.cs = capstone.Cs(capstone.CS_ARCH_ARM, capstone.CS_MODE_THUMB)
else:
self.emu = unicorn.Uc(unicorn.UC_ARCH_ARM, unicorn.UC_MODE_ARM)
r2.gets(stage.elf, "ahb 32")
r2.gets(stage.elf, "e asm.bits=32")
self.cs = capstone.Cs(capstone.CS_ARCH_ARM, capstone.CS_MODE_ARM)
r2.get(stage.elf, "pdj 1")
self.cs.detail = True
self.info = staticanalysis.LongWriteInfo(stage.elf, r['start'],
r['end'], self.thumb)
self.inss = []
self.regs = set()
self.bytes = b""
self.dst_addrs = []
self.write_size = r['writesize']
for i in self.info.bbs:
self.inss.append(i)
bs = i["bytes"].decode("hex")
self.bytes += b"%s" % bs
ci = next(self.cs.disasm(bs, i["offset"], 1))
if i["offset"] == self.writeaddr:
self.write_ins = ci
(read, write) = ci.regs_access()
for rs in (read, write):
self.regs.update([ci.reg_name(rn).encode('ascii') for rn in rs])
self.emu.mem_map(0, 0xFFFFFFFF + 1, unicorn.UC_PROT_ALL)
self.emu.mem_write(self.inss[0]["offset"], self.bytes)
self.emu.hook_add(unicorn.UC_HOOK_MEM_WRITE, self.write_hook)
self.spec = "*(0x%x)" % r['breakaddr']
TargetBreak.__init__(self, self.spec, controller, True, stage, r=r)