Python all.ARP屬性代碼示例

# 需要導入模塊: from scapy import all [as 別名]
# 或者: from scapy.all import ARP [as 別名]
def run(self):
        """Starts the thread, which is sniffing incoming ARP packets and sends out packets to spoof
        all clients on the network and the gateway. This packets are sent every __SLEEP seconds.

        Note:
            First, a ARP request packet is generated for every possible client of the network.
            This packets are directed at the gateway and update existing entries of the gateway's ARP table.
            So the gateway is not flooded with entries for non-existing clients.

            Second, a GARP broadcast request packet is generated to spoof every client on the network.
        """
        # start sniffing thread
        self.sniffthread.start()

        # generates a packet for each possible client of the network
        # these packets update existing entries in the arp table of the gateway
        # packets = [Ether(dst=self.gate_mac) / ARP(op=1, psrc=str(x), pdst=str(x)) for x in self.ip_range]

        # gratuitous arp to clients
        # updates the gateway entry of the clients arp table
        packets = [Ether(dst=ETHER_BROADCAST) / ARP(op=1, psrc=self.ipv4.gateway, pdst=self.ipv4.gateway, hwdst=ETHER_BROADCAST)]
        while True:
            sendp(packets)
            time.sleep(self.__SLEEP) 

# 需要導入模塊: from scapy import all [as 別名]
# 或者: from scapy.all import ARP [as 別名]
def scan_ips(interface='wlan0', ips='192.168.1.0/24'):
	"""a simple ARP scan with Scapy"""
	try:
		print('[*] Start to scan')
		conf.verb = 0 # hide all verbose of scapy
		ether = Ether(dst="ff:ff:ff:ff:ff:ff")
		arp = ARP(pdst = ips)
		answer, unanswered = srp(ether/arp, timeout = 2, iface = interface, inter = 0.1)

		for sent, received in answer:
			print(received.summary())

	except KeyboardInterrupt:
		print('[*] User requested Shutdown')
		print('[*] Quitting...')
		sys.exit(1) 

# 需要導入模塊: from scapy import all [as 別名]
# 或者: from scapy.all import ARP [as 別名]
def restore(self, index):
        try:
            victimIP = self._devices[index][0]
            victimMAC = self._devices[index][1]

            _LOGGER.info("Enabling internet for device IP: %s MAC: %s",
                         victimIP, victimMAC)

            del self._devices[index]

            send(ARP(op=2, pdst=victimIP, hwdst=victimMAC, psrc=self._router_ip,
                     hwsrc=self._router_mac), count=4, iface=self._interface, verbose=False)
            send(ARP(op=2, pdst=self._router_ip, hwdst=self._router_mac, psrc=victimIP,
                     hwsrc=victimMAC), count=4, iface=self._interface, verbose=False)

        except:
            _LOGGER.error("Error when restoring device index: %s", index) 

# 需要導入模塊: from scapy import all [as 別名]
# 或者: from scapy.all import ARP [as 別名]
def parsepacket(p):
    if DHCP6_Solicit in p:
        target = get_target(p)
        if should_spoof_dhcpv6(target.host):
            send_dhcp_advertise(p[DHCP6_Solicit], p, target)
    if DHCP6_Request in p:
        target = get_target(p)
        if p[DHCP6OptServerId].duid == config.selfduid and should_spoof_dhcpv6(target.host):
            send_dhcp_reply(p[DHCP6_Request], p)
            print('IPv6 address %s is now assigned to %s' % (p[DHCP6OptIA_NA].ianaopts[0].addr, pcdict[p.src]))
    if DHCP6_Renew in p:
        target = get_target(p)
        if p[DHCP6OptServerId].duid == config.selfduid and should_spoof_dhcpv6(target.host):
            send_dhcp_reply(p[DHCP6_Renew],p)
            print('Renew reply sent to %s' % p[DHCP6OptIA_NA].ianaopts[0].addr)
    if ARP in p:
        arpp = p[ARP]
        if arpp.op is 2:
            #Arp is-at package, update internal arp table
            arptable[arpp.hwsrc] = arpp.psrc
    if DNS in p:
        if p.dst == config.selfmac:
            send_dns_reply(p) 

# 需要導入模塊: from scapy import all [as 別名]
# 或者: from scapy.all import ARP [as 別名]
def build_arp_packet(source_mac, src=None, dst=None):
    """ forge arp packets used to poison and reset target connection """
    arp = dpkt.arp.ARP()
    packet = dpkt.ethernet.Ethernet()
    if not src or not dst:
        return False
    arp.sha = string_to_binary(source_mac)
    arp.spa = inet_aton(dst)
    arp.tha = '\x00' * 6
    arp.tpa = inet_aton(src)
    arp.op = dpkt.arp.ARP_OP_REPLY
    packet.src = string_to_binary(source_mac)
    packet.dst = '\xff' * 6 # broadcast address
    packet.data = arp
    packet.type = dpkt.ethernet.ETH_TYPE_ARP
    return packet 

# 需要導入模塊: from scapy import all [as 別名]
# 或者: from scapy.all import ARP [as 別名]
def restore(self, delay, target_b=None):
        if not target_b:
            target_b = self.gateway
        src_mac = ':'.join(a+b for a, b in zip(self.src_mac[::2], self.src_mac[1::2]))
        if not isinstance(self.target, list):
            dst_mac = utils.get_mac_by_ip(self.target)
            send(ARP(op=2, pdst=target_b, psrc=self.target,
                     hwdst="ff:" * 5 + "ff", hwsrc=dst_mac), count=3, verbose=False)
            send(ARP(op=2, pdst=self.target, psrc=target_b,
                     hwdst="ff:" * 5 + "ff", hwsrc=src_mac), count=3, verbose=False)
        else:
            for addr in self.target:
                dst_mac = utils.get_mac_by_ip(addr)
                send(ARP(op=2, pdst=target_b, psrc=addr,
                         hwdst="ff:" * 5 + "ff", hwsrc=dst_mac), count=3, verbose=False)
                send(ARP(op=2, pdst=addr, psrc=target_b,
                         hwdst="ff:" * 5 + "ff", hwsrc=src_mac), count=3, verbose=False) 

# 需要導入模塊: from scapy import all [as 別名]
# 或者: from scapy.all import ARP [as 別名]
def get_kube_dns_ip_mac(self):
        config = get_config()
        kubedns_svc_ip = self.extract_nameserver_ip()

        # getting actual pod ip of kube-dns service, by comparing the src mac of a dns response and arp scanning.
        dns_info_res = srp1(
            Ether() / IP(dst=kubedns_svc_ip) / UDP(dport=53) / DNS(rd=1, qd=DNSQR()),
            verbose=0,
            timeout=config.network_timeout,
        )
        kubedns_pod_mac = dns_info_res.src
        self_ip = dns_info_res[IP].dst

        arp_responses, _ = srp(
            Ether(dst="ff:ff:ff:ff:ff:ff") / ARP(op=1, pdst=f"{self_ip}/24"), timeout=config.network_timeout, verbose=0,
        )
        for _, response in arp_responses:
            if response[Ether].src == kubedns_pod_mac:
                return response[ARP].psrc, response.src 

# 需要導入模塊: from scapy import all [as 別名]
# 或者: from scapy.all import ARP [as 別名]
def poison():
    v = scapy.ARP(pdst=target, psrc=gateway)
    while True:
        try:
            scapy.send(v,verbose=0,inter=1,loop=1)
        except KeyboardInterupt:
            print(bcolours.OKBLUE + '  [Warning] Stopping...' + bcolours.ENDC)
            sys.exit(3) 

# 需要導入模塊: from scapy import all [as 別名]
# 或者: from scapy.all import ARP [as 別名]
def gw_poison():
    gw = scapy.ARP(pdst=gateway, psrc=target)
    while True:
        try:
            scapy.send(gw,verbose=0,inter=1,loop=1)
        except KeyboardInterrupt:
            print(bcolours.OKBLUE + '  [Warning] Stopping...' + bcolours.ENDC)
            sys.exit(3) 

# 需要導入模塊: from scapy import all [as 別名]
# 或者: from scapy.all import ARP [as 別名]
def raw_packet_send_arp_requests(number_of_packets):
    for _ in range(number_of_packets):
        arp_request = arp.make_request(ethernet_src_mac=ethernet_src,
                                       ethernet_dst_mac="ff:ff:ff:ff:ff:ff",
                                       sender_mac=ethernet_src,
                                       sender_ip=ip_src,
                                       target_mac="00:00:00:00:00:00",
                                       target_ip=ip_dst)
        global_socket.send(arp_request)
# endregion


# region Send ARP packets in scapy 

# 需要導入模塊: from scapy import all [as 別名]
# 或者: from scapy.all import ARP [as 別名]
def scapy_send_arp_requests(number_of_packets):
    arp_request = Ether(src=ethernet_src, dst='ff:ff:ff:ff:ff:ff') /\
                  ARP(op=1, hwsrc=ethernet_src, hwdst='00:00:00:00:00:00', psrc=ip_src, pdst=ip_dst)
    sendp(arp_request, count=number_of_packets, verbose=False)
# endregion


# region Send DHCP Discover packets in raw-packet 

# 需要導入模塊: from scapy import all [as 別名]
# 或者: from scapy.all import ARP [as 別名]
def _process_arp(self, pkt):
        """
        Updates ARP cache upon receiving ARP packets, only if the packet is not
        spoofed.

        """
        try:
            if pkt.op == 2 and pkt.hwsrc != self._host_state.host_mac:
                self._host_state.set_ip_mac_mapping(pkt.psrc, pkt.hwsrc)

        except AttributeError:
            return 

# 需要導入模塊: from scapy import all [as 別名]
# 或者: from scapy.all import ARP [as 別名]
def start(self):

        with self._lock:
            self._active = True

        utils.log('[ARP Scanning] Starting.')
        self._thread.start() 

# 需要導入模塊: from scapy import all [as 別名]
# 或者: from scapy.all import ARP [as 別名]
def _arp_scan_thread_helper(self):

        fast_scan_start_ts = None

        while True:

            if not self._host_state.is_inspecting():
                time.sleep(1)
                continue

            for ip in utils.get_network_ip_range():

                sleep_time = SLOW_SCAN_SLEEP_TIME

                # Whether we should scan fast or slow
                with self._host_state.lock:
                    fast_arp_scan = self._host_state.fast_arp_scan

                # If fast scan, we do it for at most 5 mins
                if fast_arp_scan:
                    sleep_time = FAST_SCAN_SLEEP_TIME
                    if fast_scan_start_ts is None:
                        fast_scan_start_ts = time.time()
                    else:
                        if time.time() - fast_scan_start_ts > 300:
                            fast_scan_start_ts = None
                            sleep_time = SLOW_SCAN_SLEEP_TIME
                            with self._host_state.lock:
                                self._host_state.fast_arp_scan = False

                time.sleep(sleep_time)

                arp_pkt = sc.Ether(dst="ff:ff:ff:ff:ff:ff") / \
                    sc.ARP(pdst=ip, hwdst="ff:ff:ff:ff:ff:ff")
                sc.sendp(arp_pkt, verbose=0)

                with self._lock:
                    if not self._active:
                        return 

# 需要導入模塊: from scapy import all [as 別名]
# 或者: from scapy.all import ARP [as 別名]
def stop(self):

        with self._lock:
            self._active = False

        self._thread.join()

        utils.log('[ARP Scanning] Stopped.')