Python smb3structs.FILE_WRITE_DATA屬性代碼示例

本文整理匯總了Python中impacket.smb3structs.FILE_WRITE_DATA屬性的典型用法代碼示例。如果您正苦於以下問題：Python smb3structs.FILE_WRITE_DATA屬性的具體用法？Python smb3structs.FILE_WRITE_DATA怎麽用？Python smb3structs.FILE_WRITE_DATA使用的例子？那麽, 這裏精選的屬性代碼示例或許可以為您提供幫助。您也可以進一步了解該屬性所在類impacket.smb3structs的用法示例。

在下文中一共展示了smb3structs.FILE_WRITE_DATA屬性的8個代碼示例，這些例子默認根據受歡迎程度排序。您可以為喜歡或者感覺有用的代碼點讚，您的評價將有助於係統推薦出更棒的Python代碼示例。

示例1: findWritableShare

# 需要導入模塊: from impacket import smb3structs [as 別名]
# 或者: from impacket.smb3structs import FILE_WRITE_DATA [as 別名]
def findWritableShare(self, shares):
        # Check we can write a file on the shares, stop in the first one
        writeableShare = None
        for i in shares['Buffer']:
            if i['shi1_type'] == srvs.STYPE_DISKTREE or i['shi1_type'] == srvs.STYPE_SPECIAL:
               share = i['shi1_netname'][:-1]
               tid = 0
               try:
                   tid = self.connection.connectTree(share)
                   self.connection.openFile(tid, '\\', FILE_WRITE_DATA, creationOption=FILE_DIRECTORY_FILE)
               except:
                   LOG.critical("share '%s' is not writable." % share)
                   pass
               else:
                   LOG.info('Found writable share %s' % share)
                   writeableShare = str(share)
                   break
               finally:
                   if tid != 0:
                       self.connection.disconnectTree(tid)
        return writeableShare

開發者ID:eth0izzle，項目名稱:cracke-dit，代碼行數:23，代碼來源:serviceinstall.py

示例2: findWritableShare

# 需要導入模塊: from impacket import smb3structs [as 別名]
# 或者: from impacket.smb3structs import FILE_WRITE_DATA [as 別名]
def findWritableShare(self, shares):
        # Check we can write a file on the shares, stop in the first one
        writeableShare = None
        for i in shares['Buffer']:
            if i['shi1_type'] == srvs.STYPE_DISKTREE or i['shi1_type'] == srvs.STYPE_SPECIAL:
               share = i['shi1_netname'][:-1]
               tid = 0
               try:
                   tid = self.connection.connectTree(share)
                   self.connection.openFile(tid, '\\', FILE_WRITE_DATA, creationOption=FILE_DIRECTORY_FILE)
               except:
                   LOG.debug('Exception', exc_info=True)
                   LOG.critical("share '%s' is not writable." % share)
                   pass
               else:
                   LOG.info('Found writable share %s' % share)
                   writeableShare = str(share)
                   break
               finally:
                   if tid != 0:
                       self.connection.disconnectTree(tid)
        return writeableShare

開發者ID:Coalfire-Research，項目名稱:Slackor，代碼行數:24，代碼來源:serviceinstall.py

示例3: init

# 需要導入模塊: from impacket import smb3structs [as 別名]
# 或者: from impacket.smb3structs import FILE_WRITE_DATA [as 別名]
def __init__(self, smbConnection, fileName, share='ADMIN$', access = FILE_READ_DATA | FILE_WRITE_DATA ):
        self.__smbConnection = smbConnection
        self.__share = share
        self.__access = access
        self.__fileName = fileName
        self.__tid = self.__smbConnection.connectTree(share)
        self.__fid = None
        self.__currentOffset = 0

開發者ID:byt3bl33d3r，項目名稱:CrackMapExec，代碼行數:10，代碼來源:remotefile.py

示例4: init

# 需要導入模塊: from impacket import smb3structs [as 別名]
# 或者: from impacket.smb3structs import FILE_WRITE_DATA [as 別名]
def __init__(self, smbConnection, fileName, share, access = FILE_READ_DATA | FILE_WRITE_DATA ):
        self.__smbConnection = smbConnection
        self.__share = share
        self.__access = access
        self.__fileName = fileName
        self.__tid = self.__smbConnection.connectTree(share)
        self.__fid = None
        self.__currentOffset = 0

開發者ID:m8r0wn，項目名稱:ActiveReign，代碼行數:10，代碼來源:remotefile.py

示例5: smbComNtCreateAndX

# 需要導入模塊: from impacket import smb3structs [as 別名]
# 或者: from impacket.smb3structs import FILE_WRITE_DATA [as 別名]
def smbComNtCreateAndX(self, connId, smbServer, SMBCommand, recvPacket):
        connData = smbServer.getConnectionData(connId)

        ntCreateAndXParameters = smb.SMBNtCreateAndX_Parameters(SMBCommand['Parameters'])
        ntCreateAndXData       = smb.SMBNtCreateAndX_Data( flags = recvPacket['Flags2'], data = SMBCommand['Data'])

        respSMBCommand        = smb.SMBCommand(smb.SMB.SMB_COM_NT_CREATE_ANDX)

        #ntCreateAndXParameters.dump()

        # Let's try to avoid allowing write requests from the client back to us
        # not 100% bulletproof, plus also the client might be using other SMB
        # calls (e.g. SMB_COM_WRITE)
        createOptions =  ntCreateAndXParameters['CreateOptions']
        if createOptions & smb.FILE_DELETE_ON_CLOSE == smb.FILE_DELETE_ON_CLOSE:
            errorCode = STATUS_ACCESS_DENIED
        elif ntCreateAndXParameters['Disposition'] & smb.FILE_OVERWRITE == FILE_OVERWRITE:
            errorCode = STATUS_ACCESS_DENIED
        elif ntCreateAndXParameters['Disposition'] & smb.FILE_OVERWRITE_IF == FILE_OVERWRITE_IF:
            errorCode = STATUS_ACCESS_DENIED
        elif ntCreateAndXParameters['AccessMask'] & smb.FILE_WRITE_DATA == FILE_WRITE_DATA:
            errorCode = STATUS_ACCESS_DENIED
        elif ntCreateAndXParameters['AccessMask'] & smb.FILE_APPEND_DATA == FILE_APPEND_DATA:
            errorCode = STATUS_ACCESS_DENIED
        elif ntCreateAndXParameters['AccessMask'] & smb.GENERIC_WRITE == GENERIC_WRITE:
            errorCode = STATUS_ACCESS_DENIED
        elif ntCreateAndXParameters['AccessMask'] & 0x10000 == 0x10000:
            errorCode = STATUS_ACCESS_DENIED
        else:
            errorCode = STATUS_SUCCESS

        if errorCode == STATUS_ACCESS_DENIED:
            return [respSMBCommand], None, errorCode

        # 1. Let's grab the extension and map the file's contents we will deliver
        origPathName = os.path.normpath(decodeSMBString(recvPacket['Flags2'],ntCreateAndXData['FileName']).replace('\\','/'))

        _, origPathNameExtension = os.path.splitext(origPathName)
        origPathNameExtension = origPathNameExtension.upper()[1:]

        if origPathNameExtension.upper() in self.extensions:
            targetFile = self.extensions[origPathNameExtension.upper()]
        else:
            targetFile = self.defaultFile
        
        # 2. We change the filename in the request for our targetFile
        ntCreateAndXData['FileName'] = encodeSMBString( flags = recvPacket['Flags2'], text = targetFile)
        SMBCommand['Data'] = ntCreateAndXData.getData()
        smbServer.log("%s is asking for %s. Delivering %s" % (connData['ClientIP'], origPathName,targetFile),logging.INFO)

        # 3. We call the original call with our modified data
        return self.origsmbComNtCreateAndX(connId, smbServer, SMBCommand, recvPacket)

開發者ID:Coalfire-Research，項目名稱:Slackor，代碼行數:54，代碼來源:karmaSMB.py

示例6: smb2Create

# 需要導入模塊: from impacket import smb3structs [as 別名]
# 或者: from impacket.smb3structs import FILE_WRITE_DATA [as 別名]
def smb2Create(self, connId, smbServer, recvPacket):
        connData = smbServer.getConnectionData(connId)

        ntCreateRequest       = smb2.SMB2Create(recvPacket['Data'])

        # Let's try to avoid allowing write requests from the client back to us
        # not 100% bulletproof, plus also the client might be using other SMB
        # calls 
        createOptions =  ntCreateRequest['CreateOptions']
        if createOptions & smb2.FILE_DELETE_ON_CLOSE == smb2.FILE_DELETE_ON_CLOSE:
            errorCode = STATUS_ACCESS_DENIED
        elif ntCreateRequest['CreateDisposition'] & smb2.FILE_OVERWRITE == smb2.FILE_OVERWRITE:
            errorCode = STATUS_ACCESS_DENIED
        elif ntCreateRequest['CreateDisposition'] & smb2.FILE_OVERWRITE_IF == smb2.FILE_OVERWRITE_IF:
            errorCode = STATUS_ACCESS_DENIED
        elif ntCreateRequest['DesiredAccess'] & smb2.FILE_WRITE_DATA == smb2.FILE_WRITE_DATA:
            errorCode = STATUS_ACCESS_DENIED
        elif ntCreateRequest['DesiredAccess'] & smb2.FILE_APPEND_DATA == smb2.FILE_APPEND_DATA:
            errorCode = STATUS_ACCESS_DENIED
        elif ntCreateRequest['DesiredAccess'] & smb2.GENERIC_WRITE == smb2.GENERIC_WRITE:
            errorCode = STATUS_ACCESS_DENIED
        elif ntCreateRequest['DesiredAccess'] & 0x10000 == 0x10000:
            errorCode = STATUS_ACCESS_DENIED
        else:
            errorCode = STATUS_SUCCESS

        if errorCode == STATUS_ACCESS_DENIED:
            return [smb2.SMB2Error()], None, errorCode

        # 1. Let's grab the extension and map the file's contents we will deliver
        origPathName = os.path.normpath(ntCreateRequest['Buffer'][:ntCreateRequest['NameLength']].decode('utf-16le').replace('\\','/'))

        _, origPathNameExtension = os.path.splitext(origPathName)
        origPathNameExtension = origPathNameExtension.upper()[1:]

        # Are we being asked for a directory?
        if (createOptions & smb2.FILE_DIRECTORY_FILE) == 0:
            if origPathNameExtension.upper() in self.extensions:
                targetFile = self.extensions[origPathNameExtension.upper()]
            else:
                targetFile = self.defaultFile
            connData['MS15011']['FileData'] = (os.path.basename(origPathName), targetFile)
            smbServer.log("%s is asking for %s. Delivering %s" % (connData['ClientIP'], origPathName,targetFile),logging.INFO)
        else:
            targetFile = '/'
        
        # 2. We change the filename in the request for our targetFile
        try:
            ntCreateRequest['Buffer'] = targetFile.encode('utf-16le')
        except UnicodeDecodeError:
            import sys
            ntCreateRequest['Buffer'] = targetFile.decode(sys.getfilesystemencoding()).encode('utf-16le')
        ntCreateRequest['NameLength'] = len(targetFile)*2
        recvPacket['Data'] = ntCreateRequest.getData()

        # 3. We call the original call with our modified data
        return self.origsmb2Create(connId, smbServer, recvPacket)

開發者ID:Coalfire-Research，項目名稱:Slackor，代碼行數:59，代碼來源:karmaSMB.py

示例7: smbComNtCreateAndX

# 需要導入模塊: from impacket import smb3structs [as 別名]
# 或者: from impacket.smb3structs import FILE_WRITE_DATA [as 別名]
def smbComNtCreateAndX(self, connId, smbServer, SMBCommand, recvPacket):
        connData = smbServer.getConnectionData(connId)

        ntCreateAndXParameters = smb.SMBNtCreateAndX_Parameters(SMBCommand['Parameters'])
        ntCreateAndXData       = smb.SMBNtCreateAndX_Data( flags = recvPacket['Flags2'], data = SMBCommand['Data'])

        respSMBCommand        = smb.SMBCommand(smb.SMB.SMB_COM_NT_CREATE_ANDX)

        #ntCreateAndXParameters.dump()

        # Let's try to avoid allowing write requests from the client back to us
        # not 100% bulletproof, plus also the client might be using other SMB
        # calls (e.g. SMB_COM_WRITE)
        createOptions =  ntCreateAndXParameters['CreateOptions']
        if createOptions & smb.FILE_DELETE_ON_CLOSE == smb.FILE_DELETE_ON_CLOSE:
            errorCode = STATUS_ACCESS_DENIED
        elif ntCreateAndXParameters['Disposition'] & smb.FILE_OVERWRITE == FILE_OVERWRITE:
            errorCode = STATUS_ACCESS_DENIED
        elif ntCreateAndXParameters['Disposition'] & smb.FILE_OVERWRITE_IF == FILE_OVERWRITE_IF:
            errorCode = STATUS_ACCESS_DENIED
        elif ntCreateAndXParameters['AccessMask'] & smb.FILE_WRITE_DATA == FILE_WRITE_DATA:
            errorCode = STATUS_ACCESS_DENIED
        elif ntCreateAndXParameters['AccessMask'] & smb.FILE_APPEND_DATA == FILE_APPEND_DATA:
            errorCode = STATUS_ACCESS_DENIED
        elif ntCreateAndXParameters['AccessMask'] & smb.GENERIC_WRITE == GENERIC_WRITE:
            errorCode = STATUS_ACCESS_DENIED
        elif ntCreateAndXParameters['AccessMask'] & 0x10000 == 0x10000:
            errorCode = STATUS_ACCESS_DENIED
        else:
            errorCode = STATUS_SUCCESS

        if errorCode == STATUS_ACCESS_DENIED:
            return [respSMBCommand], None, errorCode

        # 1. Let's grab the extension and map the file's contents we will deliver
        origPathName = os.path.normpath(decodeSMBString(recvPacket['Flags2'],ntCreateAndXData['FileName']).replace('\\','/'))

        _, origPathNameExtension = os.path.splitext(origPathName)
        origPathNameExtension = origPathNameExtension.upper()[1:]

        if self.extensions.has_key(origPathNameExtension.upper()):
            targetFile = self.extensions[origPathNameExtension.upper()]
        else:
            targetFile = self.defaultFile
        
        # 2. We change the filename in the request for our targetFile
        ntCreateAndXData['FileName'] = encodeSMBString( flags = recvPacket['Flags2'], text = targetFile)
        SMBCommand['Data'] = str(ntCreateAndXData)
        smbServer.log("%s is asking for %s. Delivering %s" % (connData['ClientIP'], origPathName,targetFile),logging.INFO)

        # 3. We call the original call with our modified data
        return self.origsmbComNtCreateAndX(connId, smbServer, SMBCommand, recvPacket)

開發者ID:tholum，項目名稱:PiBunny，代碼行數:54，代碼來源:karmaSMB.py

示例8: smb2Create

# 需要導入模塊: from impacket import smb3structs [as 別名]
# 或者: from impacket.smb3structs import FILE_WRITE_DATA [as 別名]
def smb2Create(self, connId, smbServer, recvPacket):
        connData = smbServer.getConnectionData(connId)

        ntCreateRequest       = smb2.SMB2Create(recvPacket['Data'])

        # Let's try to avoid allowing write requests from the client back to us
        # not 100% bulletproof, plus also the client might be using other SMB
        # calls 
        createOptions =  ntCreateRequest['CreateOptions']
        if createOptions & smb2.FILE_DELETE_ON_CLOSE == smb2.FILE_DELETE_ON_CLOSE:
            errorCode = STATUS_ACCESS_DENIED
        elif ntCreateRequest['CreateDisposition'] & smb2.FILE_OVERWRITE == smb2.FILE_OVERWRITE:
            errorCode = STATUS_ACCESS_DENIED
        elif ntCreateRequest['CreateDisposition'] & smb2.FILE_OVERWRITE_IF == smb2.FILE_OVERWRITE_IF:
            errorCode = STATUS_ACCESS_DENIED
        elif ntCreateRequest['DesiredAccess'] & smb2.FILE_WRITE_DATA == smb2.FILE_WRITE_DATA:
            errorCode = STATUS_ACCESS_DENIED
        elif ntCreateRequest['DesiredAccess'] & smb2.FILE_APPEND_DATA == smb2.FILE_APPEND_DATA:
            errorCode = STATUS_ACCESS_DENIED
        elif ntCreateRequest['DesiredAccess'] & smb2.GENERIC_WRITE == smb2.GENERIC_WRITE:
            errorCode = STATUS_ACCESS_DENIED
        elif ntCreateRequest['DesiredAccess'] & 0x10000 == 0x10000:
            errorCode = STATUS_ACCESS_DENIED
        else:
            errorCode = STATUS_SUCCESS

        if errorCode == STATUS_ACCESS_DENIED:
            return [smb2.SMB2Error()], None, errorCode

        # 1. Let's grab the extension and map the file's contents we will deliver
        origPathName = os.path.normpath(ntCreateRequest['Buffer'][:ntCreateRequest['NameLength']].decode('utf-16le').replace('\\','/'))

        _, origPathNameExtension = os.path.splitext(origPathName)
        origPathNameExtension = origPathNameExtension.upper()[1:]

        # Are we being asked for a directory?
        if (createOptions & smb2.FILE_DIRECTORY_FILE) == 0:
            if self.extensions.has_key(origPathNameExtension.upper()):
                targetFile = self.extensions[origPathNameExtension.upper()]
            else:
                targetFile = self.defaultFile
            connData['MS15011']['FileData'] = (os.path.basename(origPathName), targetFile)
            smbServer.log("%s is asking for %s. Delivering %s" % (connData['ClientIP'], origPathName,targetFile),logging.INFO)
        else:
            targetFile = '/'
        
        # 2. We change the filename in the request for our targetFile
        try:
            ntCreateRequest['Buffer'] = targetFile.encode('utf-16le')
        except UnicodeDecodeError:
            import sys
            ntCreateRequest['Buffer'] = targetFile.decode(sys.getfilesystemencoding()).encode('utf-16le')
        ntCreateRequest['NameLength'] = len(targetFile)*2
        recvPacket['Data'] = str(ntCreateRequest)

        # 3. We call the original call with our modified data
        return self.origsmb2Create(connId, smbServer, recvPacket)

開發者ID:tholum，項目名稱:PiBunny，代碼行數:59，代碼來源:karmaSMB.py

注：本文中的impacket.smb3structs.FILE_WRITE_DATA屬性示例由純淨天空整理自Github/MSDocs等開源代碼及文檔管理平台，相關代碼片段篩選自各路編程大神貢獻的開源項目，源碼版權歸原作者所有，傳播和使用請參考對應項目的License；未經允許，請勿轉載。