Python rrp.REG_DWORD屬性代碼示例

本文整理匯總了Python中impacket.dcerpc.v5.rrp.REG_DWORD屬性的典型用法代碼示例。如果您正苦於以下問題：Python rrp.REG_DWORD屬性的具體用法？Python rrp.REG_DWORD怎麽用？Python rrp.REG_DWORD使用的例子？那麽, 這裏精選的屬性代碼示例或許可以為您提供幫助。您也可以進一步了解該屬性所在類impacket.dcerpc.v5.rrp的用法示例。

在下文中一共展示了rrp.REG_DWORD屬性的8個代碼示例，這些例子默認根據受歡迎程度排序。您可以為喜歡或者感覺有用的代碼點讚，您的評價將有助於係統推薦出更棒的Python代碼示例。

示例1: test_hBaseRegQueryMultipleValues

# 需要導入模塊: from impacket.dcerpc.v5 import rrp [as 別名]
# 或者: from impacket.dcerpc.v5.rrp import REG_DWORD [as 別名]
def test_hBaseRegQueryMultipleValues(self):
        dce, rpctransport, phKey = self.connect()

        resp = rrp.hBaseRegOpenKey(dce, phKey, 'SOFTWARE\\Microsoft\\Windows NT\\CurrentVersion\x00')
        resp.dump()


        valueIn = list()
        item1 = {}
        item1['ValueName'] = 'ProductName\x00'
        item1['ValueType'] = rrp.REG_SZ
        valueIn.append(item1)
         
        item2 = {}
        item2['ValueName'] = 'InstallDate\x00'
        item2['ValueType'] = rrp.REG_DWORD
        valueIn.append(item2)

        item3 = {}
        item3['ValueName'] = 'DigitalProductId\x00'
        item3['ValueType'] = rrp.REG_BINARY
        #valueIn.append(item3)

        resp = rrp.hBaseRegQueryMultipleValues(dce, resp['phkResult'], valueIn)
        #print resp

開發者ID:joxeankoret，項目名稱:CVE-2017-7494，代碼行數:27，代碼來源:test_rrp.py

示例2: wdigest_enable

# 需要導入模塊: from impacket.dcerpc.v5 import rrp [as 別名]
# 或者: from impacket.dcerpc.v5.rrp import REG_DWORD [as 別名]
def wdigest_enable(self, context, smbconnection):
        remoteOps = RemoteOperations(smbconnection, False)
        remoteOps.enableRegistry()

        if remoteOps._RemoteOperations__rrp:
            ans = rrp.hOpenLocalMachine(remoteOps._RemoteOperations__rrp)
            regHandle = ans['phKey']

            ans = rrp.hBaseRegOpenKey(remoteOps._RemoteOperations__rrp, regHandle, 'SYSTEM\\CurrentControlSet\\Control\\SecurityProviders\\WDigest')
            keyHandle = ans['phkResult']

            rrp.hBaseRegSetValue(remoteOps._RemoteOperations__rrp, keyHandle, 'UseLogonCredential\x00',  rrp.REG_DWORD, 1)

            rtype, data = rrp.hBaseRegQueryValue(remoteOps._RemoteOperations__rrp, keyHandle, 'UseLogonCredential\x00')

            if int(data) == 1:
                context.log.success('UseLogonCredential registry key created successfully')

        try:
            remoteOps.finish()
        except:
            pass

開發者ID:byt3bl33d3r，項目名稱:CrackMapExec，代碼行數:24，代碼來源:wdigest.py

示例3: rdp_enable

# 需要導入模塊: from impacket.dcerpc.v5 import rrp [as 別名]
# 或者: from impacket.dcerpc.v5.rrp import REG_DWORD [as 別名]
def rdp_enable(self, context, smbconnection):
        remoteOps = RemoteOperations(smbconnection, False)
        remoteOps.enableRegistry()

        if remoteOps._RemoteOperations__rrp:
            ans = rrp.hOpenLocalMachine(remoteOps._RemoteOperations__rrp)
            regHandle = ans['phKey']

            ans = rrp.hBaseRegOpenKey(remoteOps._RemoteOperations__rrp, regHandle, 'SYSTEM\\CurrentControlSet\\Control\\Terminal Server')
            keyHandle = ans['phkResult']

            rrp.hBaseRegSetValue(remoteOps._RemoteOperations__rrp, keyHandle, 'fDenyTSConnections\x00',  rrp.REG_DWORD, 0)

            rtype, data = rrp.hBaseRegQueryValue(remoteOps._RemoteOperations__rrp, keyHandle, 'fDenyTSConnections\x00')

            if int(data) == 0:
                context.log.success('RDP enabled successfully')

        try:
            remoteOps.finish()
        except:
            pass

開發者ID:byt3bl33d3r，項目名稱:CrackMapExec，代碼行數:24，代碼來源:rdp.py

示例4: rdp_disable

# 需要導入模塊: from impacket.dcerpc.v5 import rrp [as 別名]
# 或者: from impacket.dcerpc.v5.rrp import REG_DWORD [as 別名]
def rdp_disable(self, context, smbconnection):
        remoteOps = RemoteOperations(smbconnection, False)
        remoteOps.enableRegistry()

        if remoteOps._RemoteOperations__rrp:
            ans = rrp.hOpenLocalMachine(remoteOps._RemoteOperations__rrp)
            regHandle = ans['phKey']

            ans = rrp.hBaseRegOpenKey(remoteOps._RemoteOperations__rrp, regHandle, 'SYSTEM\\CurrentControlSet\\Control\\Terminal Server')
            keyHandle = ans['phkResult']

            rrp.hBaseRegSetValue(remoteOps._RemoteOperations__rrp, keyHandle, 'fDenyTSConnections\x00',  rrp.REG_DWORD, 1)

            rtype, data = rrp.hBaseRegQueryValue(remoteOps._RemoteOperations__rrp, keyHandle, 'fDenyTSConnections\x00')

            if int(data) == 1:
                context.log.success('RDP disabled successfully')

        try:
            remoteOps.finish()
        except:
            pass

開發者ID:byt3bl33d3r，項目名稱:CrackMapExec，代碼行數:24，代碼來源:rdp.py

示例5: init

# 需要導入模塊: from impacket.dcerpc.v5 import rrp [as 別名]
# 或者: from impacket.dcerpc.v5.rrp import REG_DWORD [as 別名]
def __init__(self, username, password, domain, options):
        self.__username = username
        self.__password = password
        self.__domain = domain
        self.__options = options
        self.__action = options.action.upper()
        self.__lmhash = ''
        self.__nthash = ''
        self.__aesKey = options.aesKey
        self.__doKerberos = options.k
        self.__kdcHost = options.dc_ip
        self.__smbConnection = None
        self.__remoteOps = None

        # It's possible that this is defined somewhere, but I couldn't find where
        self.__regValues = {0: 'REG_NONE', 1: 'REG_SZ', 2: 'REG_EXPAND_SZ', 3: 'REG_BINARY', 4: 'REG_DWORD',
                            5: 'REG_DWORD_BIG_ENDIAN', 6: 'REG_LINK', 7: 'REG_MULTI_SZ', 11: 'REG_QWORD'}

        if options.hashes is not None:
            self.__lmhash, self.__nthash = options.hashes.split(':')

開發者ID:Coalfire-Research，項目名稱:Slackor，代碼行數:22，代碼來源:reg.py

示例6: test_hBaseRegQueryMultipleValues

# 需要導入模塊: from impacket.dcerpc.v5 import rrp [as 別名]
# 或者: from impacket.dcerpc.v5.rrp import REG_DWORD [as 別名]
def test_hBaseRegQueryMultipleValues(self):
        dce, rpctransport, phKey = self.connect()

        resp = rrp.hBaseRegOpenKey(dce, phKey, 'SOFTWARE\\Microsoft\\Windows NT\\CurrentVersion\x00')
        resp.dump()


        valueIn = list()
        item1 = {}
        item1['ValueName'] = 'ProductName\x00'
        item1['ValueType'] = rrp.REG_SZ
        valueIn.append(item1)
         
        item2 = {}
        item2['ValueName'] = 'InstallDate\x00'
        item2['ValueType'] = rrp.REG_DWORD
        valueIn.append(item2)

        item3 = {}
        item3['ValueName'] = 'DigitalProductId\x00'
        item3['ValueType'] = rrp.REG_BINARY
        #valueIn.append(item3)

        rrp.hBaseRegQueryMultipleValues(dce, resp['phkResult'], valueIn)

開發者ID:Coalfire-Research，項目名稱:Slackor，代碼行數:26，代碼來源:test_rrp.py

示例7: __parse_lp_data

# 需要導入模塊: from impacket.dcerpc.v5 import rrp [as 別名]
# 或者: from impacket.dcerpc.v5.rrp import REG_DWORD [as 別名]
def __parse_lp_data(valueType, valueData):
        try:
            if valueType == rrp.REG_SZ or valueType == rrp.REG_EXPAND_SZ:
                if type(valueData) is int:
                    print('NULL')
                else:
                    print("%s" % (valueData.decode('utf-16le')[:-1]))
            elif valueType == rrp.REG_BINARY:
                print('')
                hexdump(valueData, '\t')
            elif valueType == rrp.REG_DWORD:
                print("0x%x" % (unpack('<L', valueData)[0]))
            elif valueType == rrp.REG_QWORD:
                print("0x%x" % (unpack('<Q', valueData)[0]))
            elif valueType == rrp.REG_NONE:
                try:
                    if len(valueData) > 1:
                        print('')
                        hexdump(valueData, '\t')
                    else:
                        print(" NULL")
                except:
                    print(" NULL")
            elif valueType == rrp.REG_MULTI_SZ:
                print("%s" % (valueData.decode('utf-16le')[:-2]))
            else:
                print("Unknown Type 0x%x!" % valueType)
                hexdump(valueData)
        except Exception as e:
            logging.debug('Exception thrown when printing reg value %s', str(e))
            print('Invalid data')
            pass

開發者ID:Coalfire-Research，項目名稱:Slackor，代碼行數:34，代碼來源:reg.py

示例8: __parse_lp_data

# 需要導入模塊: from impacket.dcerpc.v5 import rrp [as 別名]
# 或者: from impacket.dcerpc.v5.rrp import REG_DWORD [as 別名]
def __parse_lp_data(valueType, valueData):
        try:
            if valueType == rrp.REG_SZ or valueType == rrp.REG_EXPAND_SZ:
                if type(valueData) is int:
                    print 'NULL'
                else:
                    print "%s" % (valueData.decode('utf-16le')[:-1])
            elif valueType == rrp.REG_BINARY:
                print ''
                hexdump(valueData, '\t')
            elif valueType == rrp.REG_DWORD:
                print "0x%x" % (unpack('<L', valueData)[0])
            elif valueType == rrp.REG_QWORD:
                print "0x%x" % (unpack('<Q', valueData)[0])
            elif valueType == rrp.REG_NONE:
                try:
                    if len(valueData) > 1:
                        print ''
                        hexdump(valueData, '\t')
                    else:
                        print " NULL"
                except:
                    print " NULL"
            elif valueType == rrp.REG_MULTI_SZ:
                print "%s" % (valueData.decode('utf-16le')[:-2])
            else:
                print "Unkown Type 0x%x!" % valueType
                hexdump(valueData)
        except Exception, e:
            logging.debug('Exception thrown when printing reg value %s', str(e))
            print 'Invalid data'
            pass

開發者ID:tholum，項目名稱:PiBunny，代碼行數:34，代碼來源:reg.py

注：本文中的impacket.dcerpc.v5.rrp.REG_DWORD屬性示例由純淨天空整理自Github/MSDocs等開源代碼及文檔管理平台，相關代碼片段篩選自各路編程大神貢獻的開源項目，源碼版權歸原作者所有，傳播和使用請參考對應項目的License；未經允許，請勿轉載。