Python rrp.MSRPC_UUID_RRP屬性代碼示例

本文整理匯總了Python中impacket.dcerpc.v5.rrp.MSRPC_UUID_RRP屬性的典型用法代碼示例。如果您正苦於以下問題：Python rrp.MSRPC_UUID_RRP屬性的具體用法？Python rrp.MSRPC_UUID_RRP怎麽用？Python rrp.MSRPC_UUID_RRP使用的例子？那麽, 這裏精選的屬性代碼示例或許可以為您提供幫助。您也可以進一步了解該屬性所在類impacket.dcerpc.v5.rrp的用法示例。

在下文中一共展示了rrp.MSRPC_UUID_RRP屬性的6個代碼示例，這些例子默認根據受歡迎程度排序。您可以為喜歡或者感覺有用的代碼點讚，您的評價將有助於係統推薦出更棒的Python代碼示例。

示例1: connect

# 需要導入模塊: from impacket.dcerpc.v5 import rrp [as 別名]
# 或者: from impacket.dcerpc.v5.rrp import MSRPC_UUID_RRP [as 別名]
def connect(self):
        rpctransport = transport.DCERPCTransportFactory(self.stringBinding)
        if len(self.hashes) > 0:
            lmhash, nthash = self.hashes.split(':')
        else:
            lmhash = ''
            nthash = ''
        if hasattr(rpctransport, 'set_credentials'):
            # This method exists only for selected protocol sequences.
            rpctransport.set_credentials(self.username,self.password, self.domain, lmhash, nthash)
        dce = rpctransport.get_dce_rpc()
        #dce.set_auth_level(RPC_C_AUTHN_LEVEL_PKT_INTEGRITY)
        dce.connect()
        dce.bind(rrp.MSRPC_UUID_RRP, transfer_syntax = self.ts)
        resp = rrp.hOpenLocalMachine(dce, MAXIMUM_ALLOWED | rrp.KEY_WOW64_32KEY | rrp.KEY_ENUMERATE_SUB_KEYS)

        return dce, rpctransport, resp['phKey']

開發者ID:joxeankoret，項目名稱:CVE-2017-7494，代碼行數:19，代碼來源:test_rrp.py

示例2: __connectWinReg

# 需要導入模塊: from impacket.dcerpc.v5 import rrp [as 別名]
# 或者: from impacket.dcerpc.v5.rrp import MSRPC_UUID_RRP [as 別名]
def __connectWinReg(self):
        rpc = transport.DCERPCTransportFactory(self.__stringBindingWinReg)
        rpc.set_smb_connection(self.__smbConnection)
        self.__rrp = rpc.get_dce_rpc()
        self.__rrp.connect()
        self.__rrp.bind(rrp.MSRPC_UUID_RRP)

開發者ID:joxeankoret，項目名稱:CVE-2017-7494，代碼行數:8，代碼來源:secretsdump.py

示例3: setUp

# 需要導入模塊: from impacket.dcerpc.v5 import rrp [as 別名]
# 或者: from impacket.dcerpc.v5.rrp import MSRPC_UUID_RRP [as 別名]
def setUp(self):
        RRPTests.setUp(self)
        configFile = ConfigParser.ConfigParser()
        configFile.read('dcetests.cfg')
        self.username = configFile.get('TCPTransport', 'username')
        self.domain   = configFile.get('TCPTransport', 'domain')
        self.serverName = configFile.get('TCPTransport', 'servername')
        self.password = configFile.get('TCPTransport', 'password')
        self.machine  = configFile.get('TCPTransport', 'machine')
        self.hashes   = configFile.get('TCPTransport', 'hashes')
        self.stringBinding = epm.hept_map(self.machine, rrp.MSRPC_UUID_RRP, protocol = 'ncacn_ip_tcp')


# Process command-line arguments.

開發者ID:joxeankoret，項目名稱:CVE-2017-7494，代碼行數:16，代碼來源:test_rrp.py

示例4: connectWinReg

# 需要導入模塊: from impacket.dcerpc.v5 import rrp [as 別名]
# 或者: from impacket.dcerpc.v5.rrp import MSRPC_UUID_RRP [as 別名]
def connectWinReg(self):
        rpc = transport.DCERPCTransportFactory(self.__stringBindingWinReg)
        rpc.set_smb_connection(self.__smbConnection)
        self.__rrp = rpc.get_dce_rpc()
        self.__rrp.connect()
        self.__rrp.bind(rrp.MSRPC_UUID_RRP)

開發者ID:Coalfire-Research，項目名稱:Slackor，代碼行數:8，代碼來源:reg.py

示例5: connect

# 需要導入模塊: from impacket.dcerpc.v5 import rrp [as 別名]
# 或者: from impacket.dcerpc.v5.rrp import MSRPC_UUID_RRP [as 別名]
def connect(self):
        if self.rrpStarted is not True:
            dce, rpctransport, scHandle = self.connect_scmr()

            desiredAccess = scmr.SERVICE_START | scmr.SERVICE_STOP | scmr.SERVICE_CHANGE_CONFIG | \
                            scmr.SERVICE_QUERY_CONFIG | scmr.SERVICE_QUERY_STATUS | scmr.SERVICE_ENUMERATE_DEPENDENTS

            resp = scmr.hROpenServiceW(dce, scHandle, 'RemoteRegistry\x00', desiredAccess)
            resp.dump()
            serviceHandle = resp['lpServiceHandle']

            try:
                resp = scmr.hRStartServiceW(dce, serviceHandle )
            except Exception as e:
                if str(e).find('ERROR_SERVICE_ALREADY_RUNNING') >=0:
                    pass
                else:
                    raise
            resp = scmr.hRCloseServiceHandle(dce, scHandle)
            self.rrpStarted = True

        rpctransport = transport.DCERPCTransportFactory(self.stringBinding)
        if len(self.hashes) > 0:
            lmhash, nthash = self.hashes.split(':')
        else:
            lmhash = ''
            nthash = ''
        if hasattr(rpctransport, 'set_credentials'):
            # This method exists only for selected protocol sequences.
            rpctransport.set_credentials(self.username,self.password, self.domain, lmhash, nthash)
        dce = rpctransport.get_dce_rpc()
        #dce.set_auth_level(RPC_C_AUTHN_LEVEL_PKT_INTEGRITY)
        dce.connect()
        dce.bind(rrp.MSRPC_UUID_RRP, transfer_syntax = self.ts)
        resp = rrp.hOpenLocalMachine(dce, MAXIMUM_ALLOWED | rrp.KEY_WOW64_32KEY | rrp.KEY_ENUMERATE_SUB_KEYS)

        return dce, rpctransport, resp['phKey']

開發者ID:Coalfire-Research，項目名稱:Slackor，代碼行數:39，代碼來源:test_rrp.py

示例6: setUp

# 需要導入模塊: from impacket.dcerpc.v5 import rrp [as 別名]
# 或者: from impacket.dcerpc.v5.rrp import MSRPC_UUID_RRP [as 別名]
def setUp(self):
        RRPTests.setUp(self)
        configFile = ConfigParser.ConfigParser()
        configFile.read('dcetests.cfg')
        self.username = configFile.get('TCPTransport', 'username')
        self.domain   = configFile.get('TCPTransport', 'domain')
        self.serverName = configFile.get('TCPTransport', 'servername')
        self.password = configFile.get('TCPTransport', 'password')
        self.machine  = configFile.get('TCPTransport', 'machine')
        self.hashes   = configFile.get('TCPTransport', 'hashes')
        self.stringBinding = epm.hept_map(self.machine, rrp.MSRPC_UUID_RRP, protocol = 'ncacn_ip_tcp')
        self.rrpStarted = False


# Process command-line arguments.

開發者ID:Coalfire-Research，項目名稱:Slackor，代碼行數:17，代碼來源:test_rrp.py

注：本文中的impacket.dcerpc.v5.rrp.MSRPC_UUID_RRP屬性示例由純淨天空整理自Github/MSDocs等開源代碼及文檔管理平台，相關代碼片段篩選自各路編程大神貢獻的開源項目，源碼版權歸原作者所有，傳播和使用請參考對應項目的License；未經允許，請勿轉載。