Python errno.WSAEWOULDBLOCK屬性代碼示例

# 需要導入模塊: import errno [as 別名]
# 或者: from errno import WSAEWOULDBLOCK [as 別名]
def doRead(self):
        """Calls self.protocol.dataReceived with all available data.

        This reads up to self.bufferSize bytes of data from its socket, then
        calls self.dataReceived(data) to process it.  If the connection is not
        lost through an error in the physical recv(), this function will return
        the result of the dataReceived call.
        """
        try:
            data = self.socket.recv(self.bufferSize)
        except socket.error as se:
            if se.args[0] == EWOULDBLOCK:
                return
            else:
                return main.CONNECTION_LOST

        return self._dataReceived(data) 

# 需要導入模塊: import errno [as 別名]
# 或者: from errno import WSAEWOULDBLOCK [as 別名]
def writeSomeData(self, data):
        """
        Write as much as possible of the given data to this TCP connection.

        This sends up to C{self.SEND_LIMIT} bytes from C{data}.  If the
        connection is lost, an exception is returned.  Otherwise, the number
        of bytes successfully written is returned.
        """
        # Limit length of buffer to try to send, because some OSes are too
        # stupid to do so themselves (ahem windows)
        limitedData = lazyByteSlice(data, 0, self.SEND_LIMIT)

        try:
            return untilConcludes(self.socket.send, limitedData)
        except socket.error as se:
            if se.args[0] in (EWOULDBLOCK, ENOBUFS):
                return 0
            else:
                return main.CONNECTION_LOST 

# 需要導入模塊: import errno [as 別名]
# 或者: from errno import WSAEWOULDBLOCK [as 別名]
def __init__ (self):
		self.sock = None		# socket object
		self.send_buf = []		# send buffer
		self.recv_buf = []		# recv buffer
		self.pend_buf = ''		# send pending
		self.state = NET_STATE_CLOSED
		self.errd = [ errno.EINPROGRESS, errno.EALREADY, errno.EWOULDBLOCK ]
		self.conn = ( errno.EISCONN, 10057, 10053 )
		self.errc = 0
		self.ipv6 = False
		self.eintr = ()
		if 'EINTR' in errno.__dict__:
			self.eintr = (errno.__dict__['EINTR'],)
		if 'WSAEWOULDBLOCK' in errno.__dict__:
			self.errd.append(errno.WSAEWOULDBLOCK)
		self.errd = tuple(self.errd)
		self.timeout = 0
		self.timecon = 0 

# 需要導入模塊: import errno [as 別名]
# 或者: from errno import WSAEWOULDBLOCK [as 別名]
def doRead(self):
        """
        Called when my socket is ready for reading.
        """
        read = 0
        while read < self.maxThroughput:
            try:
                data, addr = self.socket.recvfrom(self.maxPacketSize)
            except socket.error, se:
                no = se.args[0]
                if no in (EAGAIN, EINTR, EWOULDBLOCK):
                    return
                if (no == ECONNREFUSED) or (platformType == "win32" and no == WSAECONNRESET):
                    if self._connectedAddr:
                        self.protocol.connectionRefused()
                else:
                    raise
            else:
                read += len(data)
                try:
                    self.protocol.datagramReceived(data, addr)
                except:
                    log.err() 

# 需要導入模塊: import errno [as 別名]
# 或者: from errno import WSAEWOULDBLOCK [as 別名]
def writeSomeData(self, data):
        """
        Write as much as possible of the given data to this TCP connection.

        This sends up to C{self.SEND_LIMIT} bytes from C{data}.  If the
        connection is lost, an exception is returned.  Otherwise, the number
        of bytes successfully written is returned.
        """
        try:
            # Limit length of buffer to try to send, because some OSes are too
            # stupid to do so themselves (ahem windows)
            return self.socket.send(buffer(data, 0, self.SEND_LIMIT))
        except socket.error, se:
            if se.args[0] == EINTR:
                return self.writeSomeData(data)
            elif se.args[0] in (EWOULDBLOCK, ENOBUFS):
                return 0
            else:
                return main.CONNECTION_LOST 

# 需要導入模塊: import errno [as 別名]
# 或者: from errno import WSAEWOULDBLOCK [as 別名]
def doRead(self):
        """Called when my socket is ready for reading."""
        read = 0
        while read < self.maxThroughput:
            try:
                data, addr = self.socket.recvfrom(self.maxPacketSize)
            except socket.error, se:
                no = se.args[0]
                if no in (EAGAIN, EINTR, EWOULDBLOCK):
                    return
                if (no == ECONNREFUSED) or (platformType == "win32" and no == WSAECONNRESET):
                    if self._connectedAddr:
                        self.protocol.connectionRefused()
                else:
                    raise
            else:
                read += len(data)
                try:
                    self.protocol.datagramReceived(data, addr)
                except:
                    log.err() 

# 需要導入模塊: import errno [as 別名]
# 或者: from errno import WSAEWOULDBLOCK [as 別名]
def writeSomeData(self, data):
        """Connection.writeSomeData(data) -> #of bytes written | CONNECTION_LOST
        This writes as much data as possible to the socket and returns either
        the number of bytes read (which is positive) or a connection error code
        (which is negative)
        """
        try:
            # Limit length of buffer to try to send, because some OSes are too
            # stupid to do so themselves (ahem windows)
            return self.socket.send(buffer(data, 0, self.SEND_LIMIT))
        except socket.error, se:
            if se.args[0] == EINTR:
                return self.writeSomeData(data)
            elif se.args[0] in (EWOULDBLOCK, ENOBUFS):
                return 0
            else:
                return main.CONNECTION_LOST 

# 需要導入模塊: import errno [as 別名]
# 或者: from errno import WSAEWOULDBLOCK [as 別名]
def wakeUp(self):
        """Send a byte to my connection.
        """
        try:
            util.untilConcludes(self.w.send, b'x')
        except socket.error as e:
            if e.args[0] != errno.WSAEWOULDBLOCK:
                raise 

# 需要導入模塊: import errno [as 別名]
# 或者: from errno import WSAEWOULDBLOCK [as 別名]
def test_stopOnlyCloses(self):
        """
        When the L{IListeningPort} returned by
        L{IReactorSocket.adoptStreamPort} is stopped using
        C{stopListening}, the underlying socket is closed but not
        shutdown.  This allows another process which still has a
        reference to it to continue accepting connections over it.
        """
        reactor = self.buildReactor()

        portSocket = socket.socket()
        self.addCleanup(portSocket.close)

        portSocket.bind(("127.0.0.1", 0))
        portSocket.listen(1)
        portSocket.setblocking(False)

        # The file descriptor is duplicated by adoptStreamPort
        port = reactor.adoptStreamPort(
            portSocket.fileno(), portSocket.family, ServerFactory())
        d = port.stopListening()
        def stopped(ignored):
            # Should still be possible to accept a connection on
            # portSocket.  If it was shutdown, the exception would be
            # EINVAL instead.
            exc = self.assertRaises(socket.error, portSocket.accept)
            if platform.isWindows() and _PY3:
                self.assertEqual(exc.args[0], errno.WSAEWOULDBLOCK)
            else:
                self.assertEqual(exc.args[0], errno.EAGAIN)
        d.addCallback(stopped)
        d.addErrback(err, "Failed to accept on original port.")

        needsRunningReactor(
            reactor,
            lambda: d.addCallback(lambda ignored: reactor.stop()))

        reactor.run() 

# 需要導入模塊: import errno [as 別名]
# 或者: from errno import WSAEWOULDBLOCK [as 別名]
def test_readImmediateError(self):
        """
        If the socket is unconnected, socket reads with an immediate
        connection refusal are ignored, and reading stops. The protocol's
        C{connectionRefused} method is not called.
        """
        # Add a fake error to the list of those that count as connection
        # refused:
        udp._sockErrReadRefuse.append(-6000)
        self.addCleanup(udp._sockErrReadRefuse.remove, -6000)

        protocol = KeepReads()
        # Fail if connectionRefused is called:
        protocol.connectionRefused = lambda: 1/0

        port = udp.Port(None, protocol)

        # Try an immediate "connection refused"
        port.socket = StringUDPSocket([b"a", socket.error(-6000), b"b",
                                       socket.error(EWOULDBLOCK)])
        port.doRead()
        # Read stops on error:
        self.assertEqual(protocol.reads, [b"a"])
        # Read again:
        port.doRead()
        self.assertEqual(protocol.reads, [b"a", b"b"]) 

# 需要導入模塊: import errno [as 別名]
# 或者: from errno import WSAEWOULDBLOCK [as 別名]
def test_connectedReadImmediateError(self):
        """
        If the socket connected, socket reads with an immediate
        connection refusal are ignored, and reading stops. The protocol's
        C{connectionRefused} method is called.
        """
        # Add a fake error to the list of those that count as connection
        # refused:
        udp._sockErrReadRefuse.append(-6000)
        self.addCleanup(udp._sockErrReadRefuse.remove, -6000)

        protocol = KeepReads()
        refused = []
        protocol.connectionRefused = lambda: refused.append(True)

        port = udp.Port(None, protocol)
        port.socket = StringUDPSocket([b"a", socket.error(-6000), b"b",
                                       socket.error(EWOULDBLOCK)])
        port.connect("127.0.0.1", 9999)

        # Read stops on error:
        port.doRead()
        self.assertEqual(protocol.reads, [b"a"])
        self.assertEqual(refused, [True])

        # Read again:
        port.doRead()
        self.assertEqual(protocol.reads, [b"a", b"b"])
        self.assertEqual(refused, [True]) 

# 需要導入模塊: import errno [as 別名]
# 或者: from errno import WSAEWOULDBLOCK [as 別名]
def test_mlistener_nonblocking(self):
            sock = MultipleSocketsListener([('127.0.0.1', 0), ('::1', 0)])
            sock.setblocking(False)
            try:
                sock.accept()
            except socket.error as err:
                if os.name == 'nt':
                    code = errno.WSAEWOULDBLOCK
                else:
                    code = errno.EAGAIN
                self.assertEqual(err.errno, code)
            else:
                self.fail('exception not raised') 

# 需要導入模塊: import errno [as 別名]
# 或者: from errno import WSAEWOULDBLOCK [as 別名]
def read(self, num):
        try:
            return self.sr.recv(num)
        except socket.error as exc:
            # emulate os.read exception
            if exc.errno == errno.WSAEWOULDBLOCK:
                new_exc = OSError()
                new_exc.errno = errno.EAGAIN
                raise new_exc
            else:
                raise 

# 需要導入模塊: import errno [as 別名]
# 或者: from errno import WSAEWOULDBLOCK [as 別名]
def _sendCloseAlert(self):
        # Okay, *THIS* is a bit complicated.

        # Basically, the issue is, OpenSSL seems to not actually return
        # errors from SSL_shutdown. Therefore, the only way to
        # determine if the close notification has been sent is by
        # SSL_shutdown returning "done". However, it will not claim it's
        # done until it's both sent *and* received a shutdown notification.

        # I don't actually want to wait for a received shutdown
        # notification, though, so, I have to set RECEIVED_SHUTDOWN
        # before calling shutdown. Then, it'll return True once it's
        # *SENT* the shutdown.

        # However, RECEIVED_SHUTDOWN can't be left set, because then
        # reads will fail, breaking half close.

        # Also, since shutdown doesn't report errors, an empty write call is
        # done first, to try to detect if the connection has gone away.
        # (*NOT* an SSL_write call, because that fails once you've called
        # shutdown)
        try:
            os.write(self.socket.fileno(), '')
        except OSError, se:
            if se.args[0] in (EINTR, EWOULDBLOCK, ENOBUFS):
                return 0
            # Write error, socket gone
            return main.CONNECTION_LOST 

# 需要導入模塊: import errno [as 別名]
# 或者: from errno import WSAEWOULDBLOCK [as 別名]
def doRead(self):
        """Calls self.protocol.dataReceived with all available data.

        This reads up to self.bufferSize bytes of data from its socket, then
        calls self.dataReceived(data) to process it.  If the connection is not
        lost through an error in the physical recv(), this function will return
        the result of the dataReceived call.
        """
        try:
            data = self.socket.recv(self.bufferSize)
        except socket.error, se:
            if se.args[0] == EWOULDBLOCK:
                return
            else:
                return main.CONNECTION_LOST