Python board.TX屬性代碼示例

# 需要導入模塊: import board [as 別名]
# 或者: from board import TX [as 別名]
def touch_TX(self):  # pylint: disable=invalid-name
        """Detect touch on capacitive touch pad TX (also known as A7 on the Circuit Playground
        Express) Note: can be called as ``touch_A7`` on Circuit Playground Express.

        .. image :: ../docs/_static/capacitive_touch_pad_A7.jpg
          :alt: Capacitive touch pad TX

        To use with the Circuit Playground Express or Bluefruit:

        .. code-block:: python

          from adafruit_circuitplayground import cp

          while True:
              if cp.touch_A7:
                  print('Touched pad A7')
        """
        return self._touch(7) 

# 需要導入模塊: import board [as 別名]
# 或者: from board import TX [as 別名]
def __init__(self):
        self._a = digitalio.DigitalInOut(board.BUTTON_A)
        self._a.switch_to_input(pull=digitalio.Pull.DOWN)
        self._b = digitalio.DigitalInOut(board.BUTTON_B)
        self._b.switch_to_input(pull=digitalio.Pull.DOWN)
        self.gamepad = gamepad.GamePad(self._a, self._b)

        # Define switch:
        self._switch = digitalio.DigitalInOut(board.SLIDE_SWITCH)
        self._switch.switch_to_input(pull=digitalio.Pull.UP)

        # Define LEDs:
        self._led = digitalio.DigitalInOut(board.D13)
        self._led.switch_to_output()
        self._pixels = neopixel.NeoPixel(board.NEOPIXEL, 10)

        # Define sensors:
        self._temp = adafruit_thermistor.Thermistor(
            board.TEMPERATURE, 10000, 10000, 25, 3950
        )
        self._light = Photocell(board.LIGHT)

        # Define touch:
        # Initially, self._touches stores the pin used for a particular touch. When that touch is
        # used for the first time, the pin is replaced with the corresponding TouchIn object.
        # This saves a little RAM over using a separate read-only pin tuple.
        # For example, after `cp.touch_A2`, self._touches is equivalent to:
        # [None, board.A1, touchio.TouchIn(board.A2), board.A3, ...]
        # Slot 0 is not used (A0 is not allowed as a touch pin).
        self._touches = [
            None,
            board.A1,
            board.A2,
            board.A3,
            board.A4,
            board.A5,
            board.A6,
            board.TX,
        ]
        self._touch_threshold_adjustment = 0

        # Define acceleration:
        self._i2c = busio.I2C(board.ACCELEROMETER_SCL, board.ACCELEROMETER_SDA)
        self._int1 = digitalio.DigitalInOut(board.ACCELEROMETER_INTERRUPT)
        self._lis3dh = adafruit_lis3dh.LIS3DH_I2C(
            self._i2c, address=0x19, int1=self._int1
        )
        self._lis3dh.range = adafruit_lis3dh.RANGE_8_G

        # Define audio:
        self._speaker_enable = digitalio.DigitalInOut(board.SPEAKER_ENABLE)
        self._speaker_enable.switch_to_output(value=False)
        self._sample = None
        self._sine_wave = None
        self._sine_wave_sample = None

        # Initialise tap:
        self._detect_taps = 1
        self.detect_taps = 1