PHP Draft::saveRoutedMessage方法代碼示例

 /**
  * Routes a draft to the correct issue.
  *
  * @param   string $full_message The complete draft.
  * @return  mixed   true or array(ERROR_CODE, ERROR_STRING) in case of failure
  */
 public static function route_drafts($full_message)
 {
     // save the full message for logging purposes
     Draft::saveRoutedMessage($full_message);
     if (preg_match('/^(boundary=).*/m', $full_message)) {
         $pattern = "/(Content-Type: multipart\\/)(.+); ?\r?\n(boundary=)(.*)\$/im";
         $replacement = '$1$2; $3$4';
         $full_message = preg_replace($pattern, $replacement, $full_message);
     }
     // need some validation here
     if (empty($full_message)) {
         return array(self::EX_NOINPUT, ev_gettext('Error: The email message was empty.') . "\n");
     }
     // remove the reply-to: header
     if (preg_match('/^(reply-to:).*/im', $full_message)) {
         $full_message = preg_replace("/^(reply-to:).*\n/im", '', $full_message, 1);
     }
     // check if the draft interface is even supposed to be enabled
     $setup = Setup::get();
     if ($setup['draft_routing']['status'] != 'enabled') {
         return array(self::EX_CONFIG, ev_gettext('Error: The email draft interface is disabled.') . "\n");
     }
     if (empty($setup['draft_routing']['address_prefix'])) {
         return array(self::EX_CONFIG, ev_gettext('Error: Please configure the email address prefix.') . "\n");
     }
     if (empty($setup['draft_routing']['address_host'])) {
         return array(self::EX_CONFIG, ev_gettext('Error: Please configure the email address domain.') . "\n");
     }
     $structure = Mime_Helper::decode($full_message, true, false);
     // find which issue ID this email refers to
     if (isset($structure->headers['to'])) {
         $issue_id = self::getMatchingIssueIDs($structure->headers['to'], 'draft');
     }
     // validation is always a good idea
     if (empty($issue_id) and isset($structure->headers['cc'])) {
         // we need to try the Cc header as well
         $issue_id = self::getMatchingIssueIDs($structure->headers['cc'], 'draft');
     }
     if (empty($issue_id)) {
         return array(self::EX_DATAERR, ev_gettext('Error: The routed email had no associated Eventum issue ID or had an invalid recipient address.') . "\n");
     }
     $prj_id = Issue::getProjectID($issue_id);
     // check if the sender is allowed in this issue' project and if it is an internal user
     $sender_email = strtolower(Mail_Helper::getEmailAddress($structure->headers['from']));
     $sender_usr_id = User::getUserIDByEmail($sender_email, true);
     if (!empty($sender_usr_id)) {
         $sender_role = User::getRoleByUser($sender_usr_id, $prj_id);
         if ($sender_role < User::ROLE_USER) {
             return array(self::EX_NOPERM, ev_gettext("Error: The sender of this email is not allowed in the project associated with issue #{$issue_id}.") . "\n");
         }
     }
     AuthCookie::setAuthCookie(User::getUserIDByEmail($sender_email));
     AuthCookie::setProjectCookie($prj_id);
     $body = $structure->body;
     Draft::saveEmail($issue_id, @$structure->headers['to'], @$structure->headers['cc'], @$structure->headers['subject'], $body, false, false, false);
     // XXX: need to handle attachments coming from drafts as well?
     $usr_id = Auth::getUserID();
     History::add($issue_id, $usr_id, 'draft_routed', 'Draft routed from {from}', array('from' => $structure->headers['from']));
     return true;
 }

 /**
  * Routes a draft to the correct issue.
  *
  * @param   string $full_message The complete draft.
  */
 function route_drafts($full_message)
 {
     global $HTTP_POST_VARS;
     // save the full message for logging purposes
     Draft::saveRoutedMessage($full_message);
     if (preg_match("/^(boundary=).*/m", $full_message)) {
         $pattern = "/(Content-Type: multipart\\/)(.+); ?\r?\n(boundary=)(.*)\$/im";
         $replacement = '$1$2; $3$4';
         $full_message = preg_replace($pattern, $replacement, $full_message);
     }
     // need some validation here
     if (empty($full_message)) {
         return array(66, "Error: The email message was empty.\n");
     }
     //
     // DON'T EDIT ANYTHING BELOW THIS LINE
     //
     // remove the reply-to: header
     if (preg_match("/^(reply-to:).*/im", $full_message)) {
         $full_message = preg_replace("/^(reply-to:).*\n/im", '', $full_message, 1);
     }
     // check if the draft interface is even supposed to be enabled
     $setup = Setup::load();
     if (@$setup['draft_routing']['status'] != 'enabled') {
         return array(78, "Error: The email draft interface is disabled.\n");
     }
     $prefix = $setup['draft_routing']['address_prefix'];
     // escape plus signs so 'draft+1@example.com' becomes a valid address
     $prefix = str_replace('+', '\\+', $prefix);
     $mail_domain = quotemeta($setup['draft_routing']['address_host']);
     if (empty($prefix)) {
         return array(78, "Error: Please configure the email address prefix.\n");
     }
     if (empty($mail_domain)) {
         return array(78, "Error: Please configure the email address domain.\n");
     }
     $structure = Mime_Helper::decode($full_message, true, false);
     // find which issue ID this email refers to
     @preg_match("/{$prefix}(\\d*)@{$mail_domain}/i", $structure->headers['to'], $matches);
     @($issue_id = $matches[1]);
     // validation is always a good idea
     if (empty($issue_id)) {
         // we need to try the Cc header as well
         @preg_match("/{$prefix}(\\d*)@{$mail_domain}/i", $structure->headers['cc'], $matches);
         if (!empty($matches[1])) {
             $issue_id = $matches[1];
         } else {
             return array(65, "Error: The routed draft had no associated Eventum issue ID or had an invalid recipient address.\n");
         }
     }
     $prj_id = Issue::getProjectID($issue_id);
     // check if the sender is allowed in this issue' project and if it is an internal user
     $users = Project::getUserEmailAssocList($prj_id, 'active', User::getRoleID('Customer'));
     $sender_email = strtolower(Mail_API::getEmailAddress($structure->headers['from']));
     $user_emails = array_map('strtolower', array_values($users));
     if (!in_array($sender_email, $user_emails)) {
         return array(77, "Error: The sender of this email is not allowed in the project associated with issue #{$issue_id}.\n");
     }
     Auth::createFakeCookie(User::getUserIDByEmail($sender_email), $prj_id);
     $body = Mime_Helper::getMessageBody($structure);
     Draft::saveEmail($issue_id, @$structure->headers['to'], @$structure->headers['cc'], @$structure->headers['subject'], $body, false, false, false);
     // XXX: need to handle attachments coming from drafts as well?
     History::add($issue_id, Auth::getUserID(), History::getTypeID('draft_routed'), "Draft routed from " . $structure->headers['from']);
     return true;
 }