PHP is_subnet函數代碼示例

本文整理匯總了PHP中is_subnet函數的典型用法代碼示例。如果您正苦於以下問題：PHP is_subnet函數的具體用法？PHP is_subnet怎麽用？PHP is_subnet使用的例子？那麽, 這裏精選的函數代碼示例或許可以為您提供幫助。

在下文中一共展示了is_subnet函數的15個代碼示例，這些例子默認根據受歡迎程度排序。您可以為喜歡或者感覺有用的代碼點讚，您的評價將有助於係統推薦出更棒的PHP代碼示例。

示例1: delete_static_route

function delete_static_route($id)
{
    global $config, $a_routes;
    if (!isset($a_routes[$id])) {
        return;
    }
    $targets = array();
    if (is_alias($a_routes[$id]['network'])) {
        foreach (filter_expand_alias_array($a_routes[$id]['network']) as $tgt) {
            if (is_ipaddrv4($tgt)) {
                $tgt .= "/32";
            } elseif (is_ipaddrv6($tgt)) {
                $tgt .= "/128";
            }
            if (!is_subnet($tgt)) {
                continue;
            }
            $targets[] = $tgt;
        }
    } else {
        $targets[] = $a_routes[$id]['network'];
    }
    foreach ($targets as $tgt) {
        $family = is_subnetv6($tgt) ? "-inet6" : "-inet";
        mwexec("/sbin/route delete {$family} " . escapeshellarg($tgt));
    }
    unset($targets);
}

開發者ID:siloportem，項目名稱:core，代碼行數:28，代碼來源:system_routes.php

示例2: fixup_host

function fixup_host($value, $position) {
	$host = strip_host_logic($value);
	$not = has_not($value) ? "not " : "";
	$andor = ($position > 0) ? get_host_boolean($value, $host) : "";
	if (is_ipaddr($host))
		return "{$andor}host {$not}" . $host;
	elseif (is_subnet($host))
		return "{$andor}net {$not}" . $host;
	else
		return "";
}

開發者ID:hlcherub，項目名稱:core，代碼行數:11，代碼來源:diag_packet_capture.php

示例3: easyrule_parse_pass

function easyrule_parse_pass($int, $proto, $src, $dst, $dstport = 0, $ipproto = "inet")
{
    /* Check for valid int, srchost, dsthost, dstport, and proto */
    $protocols_with_ports = array('tcp', 'udp');
    $src = trim($src, "[]");
    $dst = trim($dst, "[]");
    if (!empty($int) && !empty($proto) && !empty($src) && !empty($dst)) {
        $int = easyrule_find_rule_interface($int);
        if ($int === false) {
            return gettext("Invalid interface for pass rule:") . ' ' . htmlspecialchars($int);
        }
        if (getprotobyname($proto) == -1) {
            return gettext("Invalid protocol for pass rule:") . ' ' . htmlspecialchars($proto);
        }
        if (!is_ipaddr($src) && !is_subnet($src) && !is_ipaddroralias($src) && !is_specialnet($src)) {
            return gettext("Tried to pass invalid source IP:") . ' ' . htmlspecialchars($src);
        }
        if (!is_ipaddr($dst) && !is_subnet($dst) && !is_ipaddroralias($dst) && !is_specialnet($dst)) {
            return gettext("Tried to pass invalid destination IP:") . ' ' . htmlspecialchars($dst);
        }
        if (in_array($proto, $protocols_with_ports)) {
            if (empty($dstport)) {
                return gettext("Missing destination port:") . ' ' . htmlspecialchars($dstport);
            }
            if (!is_port($dstport) && $dstport != "any") {
                return gettext("Tried to pass invalid destination port:") . ' ' . htmlspecialchars($dstport);
            }
        } else {
            $dstport = 0;
        }
        /* Should have valid input... */
        if (easyrule_pass_rule_add($int, $proto, $src, $dst, $dstport, $ipproto)) {
            return gettext("Successfully added pass rule!");
        } else {
            return gettext("Failed to add pass rule.");
        }
    } else {
        return gettext("Missing parameters for pass rule.");
    }
    return gettext("Unknown pass error.");
}

開發者ID:noikiy，項目名稱:core-2，代碼行數:41，代碼來源:diag_logs_filter.php

示例4: count

         }
         $new_targets[] = $tgt;
     }
 }
 if (!isset($id)) {
     $id = count($a_routes);
 }
 $oroute = $a_routes[$id];
 if (!empty($oroute)) {
     $old_targets = array();
     if (is_alias($oroute['network'])) {
         foreach (filter_expand_alias_array($oroute['network']) as $tgt) {
             if (is_ipaddr($tgt)) {
                 $tgt .= "/32";
             }
             if (!is_subnet($tgt)) {
                 continue;
             }
             $old_targets[] = $tgt;
         }
     } else {
         $old_targets[] = $oroute['network'];
     }
 }
 $overlaps = array_intersect($current_targets, $new_targets);
 $overlaps = array_diff($overlaps, $old_targets);
 if (count($overlaps)) {
     $input_errors[] = gettext("A route to these destination networks already exists") . ": " . implode(", ", $overlaps);
 }
 if (!$input_errors) {
     $route = array();

開發者ID:rdmenezes，項目名稱:pfsense，代碼行數:31，代碼來源:system_routes_edit.php

示例5: gettext

 }
 if ($_POST['target'] && !is_ipaddr($_POST['target']) && !is_subnet($_POST['target']) && !is_alias($_POST['target']) && !isset($_POST['nonat']) && !($_POST['target'] == "other-subnet")) {
     $input_errors[] = gettext("A valid target IP address must be specified.");
 }
 if ($_POST['target'] == "other-subnet") {
     if (!is_ipaddr($_POST['targetip'])) {
         $input_errors[] = gettext("A valid target IP must be specified when using the 'Other Subnet' type.");
     }
     if (!is_numericint($_POST['targetip_subnet'])) {
         $input_errors[] = gettext("A valid target bit count must be specified when using the 'Other Subnet' type.");
     }
 }
 /* Verify Pool Options */
 $poolopts = "";
 if ($_POST['poolopts']) {
     if (is_subnet($_POST['target']) || $_POST['target'] == "other-subnet") {
         $poolopts = $_POST['poolopts'];
     } elseif (is_alias($_POST['target'])) {
         if (substr($_POST['poolopts'], 0, 11) == "round-robin") {
             $poolopts = $_POST['poolopts'];
         } else {
             $input_errors[] = gettext("Only Round Robin pool options may be chosen when selecting an alias.");
         }
     }
 }
 /* if user has selected any as source, set it here */
 if ($_POST['source_type'] == "any") {
     $osn = "any";
 } else {
     if ($_POST['source_type'] == "(self)") {
         $osn = "(self)";

開發者ID:curtiszimmerman，項目名稱:pfsense，代碼行數:31，代碼來源:firewall_nat_out_edit.php

示例6: trim

 $impip = $implinea[0];
 $impdesc = trim($implinea[1]);
 if (strlen($impdesc) < 200) {
     if (strpos($impdesc, "||") === false && substr($impdesc, 0, 1) != "|" && substr($impdesc, -1, 1) != "|") {
         $iprange_type = is_iprange($impip);
         if ($iprange_type == 4) {
             list($startip, $endip) = explode('-', $impip);
             $rangesubnets = ip_range_to_subnet_array($startip, $endip);
             $imported_ips = array_merge($imported_ips, $rangesubnets);
             $rangedescs = array_fill(0, count($rangesubnets), $impdesc);
             $imported_descs = array_merge($imported_descs, $rangedescs);
         } else {
             if ($iprange_type == 6) {
                 $input_errors[] = sprintf(gettext('IPv6 address ranges are not supported (%s)'), $impip);
             } else {
                 if (!is_ipaddr($impip) && !is_subnet($impip) && !is_hostname($impip) && !empty($impip)) {
                     $input_errors[] = sprintf(gettext("%s is not an IP address. Please correct the error to continue"), $impip);
                 } elseif (!empty($impip)) {
                     $imported_ips[] = $impip;
                     $imported_descs[] = $impdesc;
                 }
             }
         }
     } else {
         if (!$desc_fmt_err_found) {
             $input_errors[] = gettext("Descriptions may not start or end with vertical bar (|) or contain double vertical bar ||.");
             $desc_fmt_err_found = true;
         }
     }
 } else {
     if (!$desc_len_err_found) {

開發者ID:nwholloway，項目名稱:pfsense，代碼行數:31，代碼來源:firewall_aliases_import.php

示例7: configd_run

    if (!empty($_POST['tablename'])) {
        $tablename = $_POST['tablename'];
    }
    if (isset($_POST['act']) && $_POST['act'] == 'update_bogons') {
        try {
            configd_run("filter update bogons");
        } catch (Exception $e) {
            $savemsg = gettext("The bogons database has NOT been updated.");
        } finally {
            $savemsg = gettext("The bogons database has been updated.");
        }
        echo $savemsg;
        exit;
    } elseif (isset($_POST['act']) && $_POST['act'] == 'delete') {
        // delete entry
        if ((is_ipaddr($_REQUEST['address']) || is_subnet($_REQUEST['address'])) && !empty($tablename)) {
            $delEntry = escapeshellarg($_REQUEST['address']);
            $delTable = escapeshellarg($tablename);
            configd_run("filter delete table {$delTable} {$delEntry}");
            header("Location: diag_tables.php?tablename=" . $tablename);
            exit;
        }
    } elseif (isset($_POST['act']) && $_POST['act'] == 'flush') {
        $delTable = escapeshellarg($tablename);
        configd_run("filter delete table {$delTable} ALL");
        header("Location: diag_tables.php?tablename=" . $tablename);
        exit;
    }
}
// fetch list of tables and content of selected table
$tables = json_decode(configd_run("filter list tables json"));

開發者ID:siloportem，項目名稱:core，代碼行數:31，代碼來源:diag_tables.php

示例8: gettext

?>
					</td>
					<td style="font-weight:bold;" align="right">
						<?php 
echo gettext("Filter expression:");
?>
						<input type="text" name="filter" class="formfld search" value="<?php 
echo htmlspecialchars($_GET['filter']);
?>
" size="30" />
						<input type="submit" class="formbtn" value="<?php 
echo gettext("Filter");
?>
" />
					<?php 
if (is_ipaddr($_GET['filter']) || is_subnet($_GET['filter'])) {
    ?>
						<input type="submit" class="formbtn" name="killfilter" value="<?php 
    echo gettext("Kill");
    ?>
" />
					<?php 
}
?>
					<td>
				</tr>
			</table>
			</form>
		</td>
	</tr>
	<tr>

開發者ID:rdmenezes，項目名稱:pfsense，代碼行數:31，代碼來源:diag_dump_states.php

示例9: clear_subsystem_dirty

         clear_subsystem_dirty('unbound');
     }
 } else {
     if (!$deleting) {
         // input validation - only allow 50 entries in a single ACL
         for ($x = 0; $x < 50; $x++) {
             if (isset($pconfig["acl_network{$x}"])) {
                 $networkacl[$x] = array();
                 $networkacl[$x]['acl_network'] = $pconfig["acl_network{$x}"];
                 $networkacl[$x]['mask'] = $pconfig["mask{$x}"];
                 $networkacl[$x]['description'] = $pconfig["description{$x}"];
                 if (!is_ipaddr($networkacl[$x]['acl_network'])) {
                     $input_errors[] = gettext("You must enter a valid IP address for each row under Networks.");
                 }
                 if (is_ipaddr($networkacl[$x]['acl_network'])) {
                     if (!is_subnet($networkacl[$x]['acl_network'] . "/" . $networkacl[$x]['mask'])) {
                         $input_errors[] = gettext("You must enter a valid IPv4 netmask for each IPv4 row under Networks.");
                     }
                 } else {
                     if (function_exists("is_ipaddrv6")) {
                         if (!is_ipaddrv6($networkacl[$x]['acl_network'])) {
                             $input_errors[] = gettext("You must enter a valid IPv6 address for {$networkacl[$x]['acl_network']}.");
                         } else {
                             if (!is_subnetv6($networkacl[$x]['acl_network'] . "/" . $networkacl[$x]['mask'])) {
                                 $input_errors[] = gettext("You must enter a valid IPv6 netmask for each IPv6 row under Networks.");
                             }
                         }
                     } else {
                         $input_errors[] = gettext("You must enter a valid IP address for each row under Networks.");
                     }
                 }

開發者ID:sjourdois，項目名稱:pfsense，代碼行數:31，代碼來源:services_unbound_acls.php

示例10: is_iprange

             }
         }
     } else {
         // IP alias - host or network
         $iprange_type = is_iprange($impip);
         if ($iprange_type == 4) {
             list($startip, $endip) = explode('-', $impip);
             $rangesubnets = ip_range_to_subnet_array($startip, $endip);
             $imported_ips = array_merge($imported_ips, $rangesubnets);
             $rangedescs = array_fill(0, count($rangesubnets), $impdesc);
             $imported_descs = array_merge($imported_descs, $rangedescs);
         } else {
             if ($iprange_type == 6) {
                 $input_errors[] = sprintf(gettext('IPv6 address ranges are not supported (%s)'), $impip);
             } else {
                 $is_subnet = is_subnet($impip);
                 if (!is_ipaddr($impip) && !$is_subnet && !is_hostname($impip) && !empty($impip)) {
                     $input_errors[] = sprintf(gettext("%s is not an IP address. Please correct the error to continue"), $impip);
                 } elseif (!empty($impip)) {
                     if ($is_subnet) {
                         $alias_type = "network";
                     }
                     $imported_ips[] = $impip;
                     $imported_descs[] = $impdesc;
                 }
             }
         }
     }
 } else {
     if (!$desc_fmt_err_found) {
         $input_errors[] = gettext("Descriptions may not start or end with vertical bar (|) or contain double vertical bar ||.");

開發者ID:KyleJohnstonNet，項目名稱:pfsense，代碼行數:31，代碼來源:firewall_aliases_import.php

示例11: gettext

 if (!(in_array($pconfig['source'], array("any", "(self)")) || is_ipaddroralias($pconfig['source']))) {
     $input_errors[] = gettext("A valid source must be specified.");
 }
 if (!empty($pconfig['source_subnet']) && !is_numericint($pconfig['source_subnet'])) {
     $input_errors[] = gettext("A valid source bit count must be specified.");
 }
 if (!(in_array($pconfig['destination'], array("any", "(self)")) || is_ipaddroralias($pconfig['destination']))) {
     $input_errors[] = gettext("A valid destination must be specified.");
 }
 if (!empty($pconfig['destination_subnet']) && !is_numericint($pconfig['destination_subnet'])) {
     $input_errors[] = gettext("A valid destination bit count must be specified.");
 }
 if ($pconfig['destination'] == "any" && !empty($pconfig['destination_not'])) {
     $input_errors[] = gettext("Negating destination address of \"any\" is invalid.");
 }
 if (!empty($pconfig['targetip']) && !is_ipaddr($pconfig['targetip']) && !is_subnet($pconfig['targetip']) && !is_alias($pconfig['targetip']) && empty($pconfig['nonat'])) {
     $input_errors[] = gettext("A valid target IP address must be specified.");
 }
 /* Verify Pool Options */
 if (!empty($pconfig['targetip']) && !is_alias($pconfig['targetip']) && substr($pconfig['poolopts'], 0, 11) == "round-robin") {
     $input_errors[] = gettext("Only Round Robin pool options may be chosen when selecting an alias.");
 }
 if (count($input_errors) == 0) {
     $natent = array();
     $natent['source'] = array();
     $natent['destination'] = array();
     $natent['descr'] = $pconfig['descr'];
     $natent['interface'] = $pconfig['interface'];
     $natent['poolopts'] = $pconfig['poolopts'];
     if (isset($a_out[$id]['created']) && is_array($a_out[$id]['created'])) {
         $natent['created'] = $a_out[$id]['created'];

開發者ID:paudam，項目名稱:opnsense-core，代碼行數:31，代碼來源:firewall_nat_out_edit.php

示例12: array_merge

 if ("https" === $_POST['webguiproto']) {
     $reqdfields = array_merge($reqdfields, explode(" ", "certificate privatekey"));
     $reqdfieldsn = array_merge($reqdfieldsn, array(gettext("Certificate"), gettext("Private key")));
     $reqdfieldst = array_merge($reqdfieldst, explode(" ", "certificate privatekey"));
 }
 if (!empty($_POST['webguiport'])) {
     $reqdfields = array_merge($reqdfields, array("webguiport"));
     $reqdfieldsn = array_merge($reqdfieldsn, array(gettext("Port")));
     $reqdfieldst = array_merge($reqdfieldst, array("port"));
 }
 do_input_validation($_POST, $reqdfields, $reqdfieldsn, $input_errors);
 do_input_validation_type($_POST, $reqdfields, $reqdfieldsn, $reqdfieldst, $input_errors);
 if (!empty($_POST['webguihostsallow'])) {
     foreach (explode(' ', $_POST['webguihostsallow']) as $a) {
         list($hp, $np) = explode('/', $a);
         if (!is_ipaddr($hp) || !empty($np) && !is_subnet($a)) {
             $input_errors[] = gettext("A valid IP address or CIDR notation must be specified for the hosts allow.");
         }
     }
 }
 if ($_POST['dns1'] && !is_ipv4addr($_POST['dns1']) || $_POST['dns2'] && !is_ipv4addr($_POST['dns2'])) {
     $input_errors[] = gettext("A valid IPv4 address must be specified for the primary/secondary DNS server.");
 }
 if ($_POST['ipv6dns1'] && !is_ipv6addr($_POST['ipv6dns1']) || $_POST['ipv6dns2'] && !is_ipv6addr($_POST['ipv6dns2'])) {
     $input_errors[] = gettext("A valid IPv6 address must be specified for the primary/secondary DNS server.");
 }
 if (isset($_POST['ntp_enable'])) {
     $t = (int) $_POST['ntp_updateinterval'];
     if ($t < 0 || $t > 0 && $t < 6 || $t > 1440) {
         $input_errors[] = gettext("The time update interval must be either between 6 and 1440.");
     }

開發者ID:sdoney，項目名稱:nas4free，代碼行數:31，代碼來源:system.php

示例13: start_capture

/**
 *  start capture operation
 *  @param array $option, options to pass to tpcdump (interface, promiscuous, snaplen, fam, host, proto, port)
 */
function start_capture($options)
{
    $cmd_opts = array();
    $filter_opts = array();
    $intf = get_real_interface($options['interface']);
    $cmd_opts[] = '-i ' . $intf;
    if (empty($options['promiscuous'])) {
        // disable promiscuous mode
        $cmd_opts[] = '-p';
    }
    if (!empty($options['snaplen']) && is_numeric($options['snaplen'])) {
        // setup Packet Length
        $cmd_opts[] = '-s ' . $options['snaplen'];
    }
    if (!empty($options['count']) && is_numeric($options['count'])) {
        // setup count
        $cmd_opts[] = '-c ' . $options['count'];
    }
    if (!empty($options['fam']) && in_array($options['fam'], array('ip', 'ip6'))) {
        // filter address family
        $filter_opts[] = $options['fam'];
    }
    if (!empty($options['proto'])) {
        // filter protocol
        $filter_opts[] = $options['proto'];
    }
    if (!empty($options['host'])) {
        // filter host argument
        $filter = '';
        $prev_token = '';
        foreach (explode(' ', $options['host']) as $token) {
            if (in_array(trim($token), array('and', 'or'))) {
                $filter .= $token;
            } elseif (is_ipaddr($token)) {
                $filter .= "host " . $prev_token . " " . $token;
            } elseif (is_subnet($token)) {
                $filter .= "net " . $prev_token . " " . $token;
            }
            if (trim($token) == 'not') {
                $prev_token = 'not';
            } else {
                $prev_token = '';
            }
            $filter .= " ";
        }
        $filter_opts[] = "( " . $filter . " )";
    }
    if (!empty($options['port'])) {
        // filter port
        $filter_opts[] = "port " . str_replace("!", "not ", $options['port']);
    }
    if (!empty($intf)) {
        $cmd = '/usr/sbin/tcpdump ';
        $cmd .= implode(' ', $cmd_opts);
        $cmd .= ' -w /root/packetcapture.cap ';
        $cmd .= " " . escapeshellarg(implode(' and ', $filter_opts));
        //delete previous packet capture if it exists
        if (file_exists('/root/packetcapture.cap')) {
            unlink('/root/packetcapture.cap');
        }
        mwexec_bg($cmd);
    }
}

開發者ID:8191，項目名稱:opnsense-core，代碼行數:67，代碼來源:diag_packet_capture.php

示例14: file_get_contents

 if (file_exists("{$temp_filename}/aliases")) {
     $file_contents = file_get_contents("{$temp_filename}/aliases");
     $file_contents = str_replace("#", "\n#", $file_contents);
     $file_contents_split = explode("\n", $file_contents);
     foreach ($file_contents_split as $fc) {
         // Stop at 3000 items, aliases larger than that tend to break both pf and the WebGUI.
         if ($address_count >= 3000) {
             break;
         }
         $tmp = trim($fc);
         if (stristr($fc, "#")) {
             $tmp_split = explode("#", $tmp);
             $tmp = trim($tmp_split[0]);
         }
         $tmp = trim($tmp);
         if (!empty($tmp) && (is_ipaddr($tmp) || is_subnet($tmp))) {
             $address[] = $tmp;
             $isfirst = 1;
             $address_count++;
         }
     }
     if ($isfirst == 0) {
         /* nothing was found */
         $input_errors[] = gettext("You must provide a valid URL. Could not fetch usable data.");
         $dont_update = true;
         break;
     }
     $alias['aliasurl'][] = $_POST['address' . $x];
     mwexec("/bin/rm -rf {$temp_filename}");
 } else {
     $input_errors[] = gettext("You must provide a valid URL.");

開發者ID:rdmenezes，項目名稱:pfsense，代碼行數:31，代碼來源:firewall_aliases_edit.php

示例15: gettext

?>
</div></td>
						<td><div id="twocolumn">CIDR</div></td>
						<td><div id="threecolumn"><?php 
echo gettext("Description");
?>
</div></td>
					</tr>

					<?php 
$counter = 0;
if ($pconfig['address'] != "") {
    $addresses = explode(" ", $pconfig['address']);
    $details = explode("||", $pconfig['detail']);
    while ($counter < count($addresses)) {
        if (is_subnet($addresses[$counter])) {
            list($address, $address_subnet) = explode("/", $addresses[$counter]);
        } else {
            $address = $addresses[$counter];
            $address_subnet = "";
        }
        ?>
					<tr>
						<td>
							<input autocomplete="off" name="address<?php 
        echo $counter;
        ?>
" type="text" class="formfldalias ipv4v6" id="address<?php 
        echo $counter;
        ?>
" size="30" value="<?php

開發者ID:wcchandler，項目名稱:pfsense，代碼行數:31，代碼來源:firewall_aliases_edit.php

注：本文中的is_subnet函數示例由純淨天空整理自Github/MSDocs等開源代碼及文檔管理平台，相關代碼片段篩選自各路編程大神貢獻的開源項目，源碼版權歸原作者所有，傳播和使用請參考對應項目的License；未經允許，請勿轉載。