Java ValueAxis.draw方法代碼示例

本文整理匯總了Java中org.jfree.chart.axis.ValueAxis.draw方法的典型用法代碼示例。如果您正苦於以下問題：Java ValueAxis.draw方法的具體用法？Java ValueAxis.draw怎麽用？Java ValueAxis.draw使用的例子？那麽, 這裏精選的方法代碼示例或許可以為您提供幫助。您也可以進一步了解該方法所在類org.jfree.chart.axis.ValueAxis的用法示例。

在下文中一共展示了ValueAxis.draw方法的6個代碼示例，這些例子默認根據受歡迎程度排序。您可以為喜歡或者感覺有用的代碼點讚，您的評價將有助於係統推薦出更棒的Java代碼示例。

示例1: draw

import org.jfree.chart.axis.ValueAxis; //導入方法依賴的package包/類
/**
 * Draws the plot within the specified area on a graphics device.
 * 
 * @param g2  the graphics device.
 * @param area  the plot area (in Java2D space).
 * @param anchor  an anchor point in Java2D space (<code>null</code> permitted).
 * @param parentState  the state from the parent plot, if there is one (<code>null</code> 
 *                     permitted).
 * @param info  collects chart drawing information (<code>null</code> permitted).
 */
public void draw(Graphics2D g2,
                 Rectangle2D area,
                 Point2D anchor,
                 PlotState parentState,
                 PlotRenderingInfo info) {
    
    // set up info collection...
    if (info != null) {
        info.setPlotArea(area);
    }

    // adjust the drawing area for plot insets (if any)...
    Insets insets = getInsets();
    if (insets != null) {
        area.setRect(
            area.getX() + insets.left, area.getY() + insets.top,
            area.getWidth() - insets.left - insets.right,
            area.getHeight() - insets.top - insets.bottom
        );
    }

    AxisSpace space = calculateAxisSpace(g2, area);
    Rectangle2D dataArea = space.shrink(area, null);

    // set the width and height of non-shared axis of all sub-plots
    setFixedRangeAxisSpaceForSubplots(space);

    // draw the shared axis
    ValueAxis axis = getDomainAxis();
    RectangleEdge edge = getDomainAxisEdge();
    double cursor = RectangleEdge.coordinate(dataArea, edge);
    AxisState axisState = axis.draw(g2, cursor, area, dataArea, edge, info);
    if (parentState == null) {
        parentState = new PlotState();
    }
    parentState.getSharedAxisStates().put(axis, axisState);
    
    // draw all the subplots
    for (int i = 0; i < this.subplots.size(); i++) {
        XYPlot plot = (XYPlot) this.subplots.get(i);
        PlotRenderingInfo subplotInfo = null;
        if (info != null) {
            subplotInfo = new PlotRenderingInfo(info.getOwner());
            info.addSubplotInfo(subplotInfo);
        }
        plot.draw(g2, this.subplotAreas[i], anchor, parentState, subplotInfo);
    }

    if (info != null) {
        info.setDataArea(dataArea);
    }
    
}

開發者ID:parabuild-ci，項目名稱:parabuild-ci，代碼行數:64，代碼來源:CombinedDomainXYPlot.java

示例2: draw

import org.jfree.chart.axis.ValueAxis; //導入方法依賴的package包/類
/**
 * Draws the plot on a Java 2D graphics device (such as the screen or a printer).
 * Will perform all the placement calculations for each sub-plots and then tell these to draw
 * themselves.
 *
 * @param g2  the graphics device.
 * @param plotArea  the area within which the plot (including axis labels) should be drawn.
 * @param parentState  the parent state.
 * @param info  collects information about the drawing (<code>null</code> permitted).
 */
public void draw(Graphics2D g2, Rectangle2D plotArea, PlotState parentState,
                 PlotRenderingInfo info) {

    // set up info collection...
    if (info != null) {
        info.setPlotArea(plotArea);
    }

    // adjust the drawing area for plot insets (if any)...
    Insets insets = getInsets();
    if (insets != null) {
        plotArea.setRect(
            plotArea.getX() + insets.left,
            plotArea.getY() + insets.top,
            plotArea.getWidth() - insets.left - insets.right,
            plotArea.getHeight() - insets.top - insets.bottom
        );
    }

    // calculate the data area...
    AxisSpace space = calculateAxisSpace(g2, plotArea);
    Rectangle2D dataArea = space.shrink(plotArea, null);

    // set the width and height of non-shared axis of all sub-plots
    setFixedDomainAxisSpaceForSubplots(space);

    // draw the shared axis
    ValueAxis axis = getRangeAxis();
    RectangleEdge rangeEdge = getRangeAxisEdge();
    double cursor = RectangleEdge.coordinate(dataArea, rangeEdge);
    AxisState state = axis.draw(g2, cursor, plotArea, dataArea, rangeEdge, info);
    if (parentState == null) {
        parentState = new PlotState();
    }
    parentState.getSharedAxisStates().put(axis, state);
    
    // draw all the charts
    for (int i = 0; i < this.subplots.size(); i++) {
        CategoryPlot plot = (CategoryPlot) this.subplots.get(i);
        PlotRenderingInfo subplotInfo = null;
        if (info != null) {
            subplotInfo = new PlotRenderingInfo(info.getOwner());
            info.addSubplotInfo(subplotInfo);
        }
        plot.draw(g2, this.subplotArea[i], parentState, subplotInfo);
    }

    if (info != null) {
        info.setDataArea(dataArea);
    }

}

開發者ID:parabuild-ci，項目名稱:parabuild-ci，代碼行數:63，代碼來源:CombinedRangeCategoryPlot.java

示例3: draw

import org.jfree.chart.axis.ValueAxis; //導入方法依賴的package包/類
/**
 * Draws the plot within the specified area on a graphics device.
 * 
 * @param g2  the graphics device.
 * @param area  the plot area (in Java2D space).
 * @param anchor  an anchor point in Java2D space (<code>null</code> permitted).
 * @param parentState  the state from the parent plot, if there is one (<code>null</code> 
 *                     permitted).
 * @param info  collects chart drawing information (<code>null</code> permitted).
 */
public void draw(Graphics2D g2,
                 Rectangle2D area,
                 Point2D anchor,
                 PlotState parentState,
                 PlotRenderingInfo info) {
    
    // set up info collection...
    if (info != null) {
        info.setPlotArea(area);
    }

    // adjust the drawing area for plot insets (if any)...
    Insets insets = getInsets();
    if (insets != null) {
        area.setRect(area.getX() + insets.left,
                     area.getY() + insets.top,
                     area.getWidth() - insets.left - insets.right,
                     area.getHeight() - insets.top - insets.bottom);
    }

    AxisSpace space = calculateAxisSpace(g2, area);
    Rectangle2D dataArea = space.shrink(area, null);
    //this.axisOffset.trim(dataArea);

    // set the width and height of non-shared axis of all sub-plots
    setFixedDomainAxisSpaceForSubplots(space);

    // draw the shared axis
    ValueAxis axis = getRangeAxis();
    RectangleEdge edge = getRangeAxisEdge();
    double cursor = RectangleEdge.coordinate(dataArea, edge);
    AxisState axisState = axis.draw(g2, cursor, area, dataArea, edge, info);

    if (parentState == null) {
        parentState = new PlotState();
    }
    parentState.getSharedAxisStates().put(axis, axisState);
    
    // draw all the charts
    for (int i = 0; i < this.subplots.size(); i++) {
        XYPlot plot = (XYPlot) this.subplots.get(i);
        PlotRenderingInfo subplotInfo = null;
        if (info != null) {
            subplotInfo = new PlotRenderingInfo(info.getOwner());
            info.addSubplotInfo(subplotInfo);
        }
        plot.draw(g2, this.subplotAreas[i], anchor, parentState, subplotInfo);
    }

    if (info != null) {
        info.setDataArea(dataArea);
    }

}

開發者ID:parabuild-ci，項目名稱:parabuild-ci，代碼行數:65，代碼來源:CombinedRangeXYPlot.java

示例4: draw

import org.jfree.chart.axis.ValueAxis; //導入方法依賴的package包/類
/**
 * Draws the plot within the specified area on a graphics device.
 * 
 * @param g2  the graphics device.
 * @param area  the plot area (in Java2D space).
 * @param anchor  an anchor point in Java2D space (<code>null</code> 
 *                permitted).
 * @param parentState  the state from the parent plot, if there is one 
 *                     (<code>null</code> permitted).
 * @param info  collects chart drawing information (<code>null</code> 
 *              permitted).
 */
public void draw(Graphics2D g2,
                 Rectangle2D area,
                 Point2D anchor,
                 PlotState parentState,
                 PlotRenderingInfo info) {
    
    // set up info collection...
    if (info != null) {
        info.setPlotArea(area);
    }

    // adjust the drawing area for plot insets (if any)...
    RectangleInsets insets = getInsets();
    insets.trim(area);

    AxisSpace space = calculateAxisSpace(g2, area);
    Rectangle2D dataArea = space.shrink(area, null);

    // set the width and height of non-shared axis of all sub-plots
    setFixedRangeAxisSpaceForSubplots(space);

    // draw the shared axis
    ValueAxis axis = getDomainAxis();
    RectangleEdge edge = getDomainAxisEdge();
    double cursor = RectangleEdge.coordinate(dataArea, edge);
    AxisState axisState = axis.draw(g2, cursor, area, dataArea, edge, info);
    if (parentState == null) {
        parentState = new PlotState();
    }
    parentState.getSharedAxisStates().put(axis, axisState);
    
    // draw all the subplots
    for (int i = 0; i < this.subplots.size(); i++) {
        XYPlot plot = (XYPlot) this.subplots.get(i);
        PlotRenderingInfo subplotInfo = null;
        if (info != null) {
            subplotInfo = new PlotRenderingInfo(info.getOwner());
            info.addSubplotInfo(subplotInfo);
        }
        plot.draw(g2, this.subplotAreas[i], anchor, parentState, 
                subplotInfo);
    }

    if (info != null) {
        info.setDataArea(dataArea);
    }
    
}

開發者ID:parabuild-ci，項目名稱:parabuild-ci，代碼行數:61，代碼來源:CombinedDomainXYPlot.java

示例5: draw

import org.jfree.chart.axis.ValueAxis; //導入方法依賴的package包/類
/**
 * Draws the plot on a Java 2D graphics device (such as the screen or a 
 * printer).  Will perform all the placement calculations for each 
 * sub-plots and then tell these to draw themselves.
 *
 * @param g2  the graphics device.
 * @param area  the area within which the plot (including axis labels)
 *              should be drawn.
 * @param anchor  the anchor point (<code>null</code> permitted).
 * @param parentState  the parent state.
 * @param info  collects information about the drawing (<code>null</code> 
 *              permitted).
 */
public void draw(Graphics2D g2, Rectangle2D area, Point2D anchor,
                 PlotState parentState,
                 PlotRenderingInfo info) {

    // set up info collection...
    if (info != null) {
        info.setPlotArea(area);
    }

    // adjust the drawing area for plot insets (if any)...
    RectangleInsets insets = getInsets();
    insets.trim(area);

    // calculate the data area...
    AxisSpace space = calculateAxisSpace(g2, area);
    Rectangle2D dataArea = space.shrink(area, null);

    // set the width and height of non-shared axis of all sub-plots
    setFixedDomainAxisSpaceForSubplots(space);

    // draw the shared axis
    ValueAxis axis = getRangeAxis();
    RectangleEdge rangeEdge = getRangeAxisEdge();
    double cursor = RectangleEdge.coordinate(dataArea, rangeEdge);
    AxisState state = axis.draw(g2, cursor, area, dataArea, rangeEdge, 
            info);
    if (parentState == null) {
        parentState = new PlotState();
    }
    parentState.getSharedAxisStates().put(axis, state);
    
    // draw all the charts
    for (int i = 0; i < this.subplots.size(); i++) {
        CategoryPlot plot = (CategoryPlot) this.subplots.get(i);
        PlotRenderingInfo subplotInfo = null;
        if (info != null) {
            subplotInfo = new PlotRenderingInfo(info.getOwner());
            info.addSubplotInfo(subplotInfo);
        }
        plot.draw(g2, this.subplotArea[i], null, parentState, subplotInfo);
    }

    if (info != null) {
        info.setDataArea(dataArea);
    }

}

開發者ID:parabuild-ci，項目名稱:parabuild-ci，代碼行數:61，代碼來源:CombinedRangeCategoryPlot.java

示例6: draw

import org.jfree.chart.axis.ValueAxis; //導入方法依賴的package包/類
/**
 * Draws the plot within the specified area on a graphics device.
 * 
 * @param g2  the graphics device.
 * @param area  the plot area (in Java2D space).
 * @param anchor  an anchor point in Java2D space (<code>null</code> 
 *                permitted).
 * @param parentState  the state from the parent plot, if there is one 
 *                     (<code>null</code> permitted).
 * @param info  collects chart drawing information (<code>null</code> 
 *              permitted).
 */
public void draw(Graphics2D g2,
                 Rectangle2D area,
                 Point2D anchor,
                 PlotState parentState,
                 PlotRenderingInfo info) {
    
    // set up info collection...
    if (info != null) {
        info.setPlotArea(area);
    }

    // adjust the drawing area for plot insets (if any)...
    RectangleInsets insets = getInsets();
    insets.trim(area);

    AxisSpace space = calculateAxisSpace(g2, area);
    Rectangle2D dataArea = space.shrink(area, null);
    //this.axisOffset.trim(dataArea);

    // set the width and height of non-shared axis of all sub-plots
    setFixedDomainAxisSpaceForSubplots(space);

    // draw the shared axis
    ValueAxis axis = getRangeAxis();
    RectangleEdge edge = getRangeAxisEdge();
    double cursor = RectangleEdge.coordinate(dataArea, edge);
    AxisState axisState = axis.draw(g2, cursor, area, dataArea, edge, info);

    if (parentState == null) {
        parentState = new PlotState();
    }
    parentState.getSharedAxisStates().put(axis, axisState);
    
    // draw all the charts
    for (int i = 0; i < this.subplots.size(); i++) {
        XYPlot plot = (XYPlot) this.subplots.get(i);
        PlotRenderingInfo subplotInfo = null;
        if (info != null) {
            subplotInfo = new PlotRenderingInfo(info.getOwner());
            info.addSubplotInfo(subplotInfo);
        }
        plot.draw(g2, this.subplotAreas[i], anchor, parentState, 
                subplotInfo);
    }

    if (info != null) {
        info.setDataArea(dataArea);
    }

}

開發者ID:parabuild-ci，項目名稱:parabuild-ci，代碼行數:63，代碼來源:CombinedRangeXYPlot.java

注：本文中的org.jfree.chart.axis.ValueAxis.draw方法示例由純淨天空整理自Github/MSDocs等開源代碼及文檔管理平台，相關代碼片段篩選自各路編程大神貢獻的開源項目，源碼版權歸原作者所有，傳播和使用請參考對應項目的License；未經允許，請勿轉載。