Java Rectangle2D.getMinX方法代碼示例

import java.awt.geom.Rectangle2D; //導入方法依賴的package包/類
public List<AStarNode> getIntersectedNodes(final Rectangle2D rectangle) {
  final Point2D start = new Point2D.Double(rectangle.getMinX(), rectangle.getMinY());
  final Point2D end = new Point2D.Double(rectangle.getMaxX(), rectangle.getMaxY());

  final AStarNode startNode = this.getNodeFromMapLocation(start);
  final AStarNode endNode = this.getNodeFromMapLocation(end);

  final List<AStarNode> nodes = new ArrayList<>();
  if (startNode == null || endNode == null) {
    return nodes;
  }

  for (int x = startNode.getGridX(); x <= endNode.getGridX(); x++) {
    for (int y = startNode.getGridY(); y <= endNode.getGridY(); y++) {
      nodes.add(this.getGrid()[x][y]);
    }
  }

  return nodes;
}
 

import java.awt.geom.Rectangle2D; //導入方法依賴的package包/類
/**
 * Utility method for drawing a line perpendicular to the range axis (used
 * for crosshairs).
 *
 * @param g2  the graphics device.
 * @param dataArea  the area defined by the axes.
 * @param value  the data value.
 * @param stroke  the line stroke (<code>null</code> not permitted).
 * @param paint  the line paint (<code>null</code> not permitted).
 */
protected void drawRangeLine(Graphics2D g2, Rectangle2D dataArea,
        double value, Stroke stroke, Paint paint) {

    double java2D = getRangeAxis().valueToJava2D(value, dataArea, 
            getRangeAxisEdge());
    Line2D line = null;
    if (this.orientation == PlotOrientation.HORIZONTAL) {
        line = new Line2D.Double(java2D, dataArea.getMinY(), java2D, 
                dataArea.getMaxY());
    }
    else if (this.orientation == PlotOrientation.VERTICAL) {
        line = new Line2D.Double(dataArea.getMinX(), java2D, 
                dataArea.getMaxX(), java2D);
    }
    g2.setStroke(stroke);
    g2.setPaint(paint);
    g2.draw(line);

}
 

import java.awt.geom.Rectangle2D; //導入方法依賴的package包/類
private void shrinkSelectionXAxis(double x, double y, Selection selectionObject, ValueAxis axis, int axisIndex,
		double zoomFactor) {
	Rectangle2D scaledDataArea = getScreenDataArea((int) x, (int) y);

	double minX = scaledDataArea.getMinX();
	double maxX = scaledDataArea.getMaxX();
	double partToLeft = (x - minX) / (maxX - minX);

	double lowerDomain = axis.getLowerBound();
	double upperDomain = axis.getUpperBound();
	double middlePointLeft = lowerDomain + (upperDomain - lowerDomain) * partToLeft;
	double width = (upperDomain - lowerDomain) * zoomFactor;
	Range domainRange = new Range(middlePointLeft - width / 2d, middlePointLeft + width / 2d);
	for (String axisName : axisNameResolver.resolveXAxis(axisIndex)) {
		selectionObject.addDelimiter(axisName, domainRange);
	}
}
 

import java.awt.geom.Rectangle2D; //導入方法依賴的package包/類
/**
 * Draws a range crosshair.
 * 
 * @param g2  the graphics target.
 * @param dataArea  the data area.
 * @param orientation  the plot orientation.
 * @param value  the crosshair value.
 * @param axis  the axis against which the value is measured.
 * @param stroke  the stroke used to draw the crosshair line.
 * @param paint  the paint used to draw the crosshair line.
 * 
 * @since 1.0.5
 */
protected void drawRangeCrosshair(Graphics2D g2, Rectangle2D dataArea, 
        PlotOrientation orientation, double value, ValueAxis axis, 
        Stroke stroke, Paint paint) {
    
    if (!axis.getRange().contains(value)) {
        return;
    }
    Line2D line = null;
    if (orientation == PlotOrientation.HORIZONTAL) {
        double xx = axis.valueToJava2D(value, dataArea, 
                RectangleEdge.BOTTOM);
        line = new Line2D.Double(xx, dataArea.getMinY(), xx, 
                dataArea.getMaxY());
    }
    else {
        double yy = axis.valueToJava2D(value, dataArea, 
                RectangleEdge.LEFT);
        line = new Line2D.Double(dataArea.getMinX(), yy, 
                dataArea.getMaxX(), yy);
    }
    g2.setStroke(stroke);
    g2.setPaint(paint);
    g2.draw(line);
   
}
 

import java.awt.geom.Rectangle2D; //導入方法依賴的package包/類
/**
 * Draws the needle.
 *
 * @param g2  the graphics device.
 * @param plotArea  the plot area.
 * @param rotate  the rotation point.
 * @param angle  the angle.
 */
protected void drawNeedle(Graphics2D g2, Rectangle2D plotArea, 
                          Point2D rotate, double angle) {

    Line2D shape = new Line2D.Double();

    double x = plotArea.getMinX() + (plotArea.getWidth() / 2);
    shape.setLine(x, plotArea.getMinY(), x, plotArea.getMaxY());

    Shape s = shape;

    if ((rotate != null) && (angle != 0)) {
        /// we have rotation
        getTransform().setToRotation(angle, rotate.getX(), rotate.getY());
        s = getTransform().createTransformedShape(s);
    }

    defaultDisplay(g2, s);

}
 

import java.awt.geom.Rectangle2D; //導入方法依賴的package包/類
/**
 * Helper method which returns a value if it lies
 * inside the visible dataArea and otherwise the corresponding
 * coordinate on the border of the dataArea. The PlotOrientation
 * is taken into account. 
 * Useful to avoid possible sun.dc.pr.PRException: endPath: bad path
 * which occurs when trying to draw lines/shapes which in large part
 * lie outside of the visible dataArea.
 * 
 * @param value the value which shall be 
 * @param dataArea  the area within which the data is being drawn.
 * @param plot  the plot (can be used to obtain standard color 
 *              information etc).
 * @return <code>double</code> value inside the data area.
 */
protected static double restrictValueToDataArea(double value, 
                                                XYPlot plot, 
                                                Rectangle2D dataArea) {
    double min = 0;
    double max = 0;
    if (plot.getOrientation() == PlotOrientation.VERTICAL) {
        min = dataArea.getMinY();
        max = dataArea.getMaxY();
    } 
    else if (plot.getOrientation() ==  PlotOrientation.HORIZONTAL) {
        min = dataArea.getMinX();
        max = dataArea.getMaxX();
    }       
    if (value < min) {
        value = min;
    }
    else if (value > max) {
        value = max;
    }
    return value;
}
 

import java.awt.geom.Rectangle2D; //導入方法依賴的package包/類
/**
 * Utility method for drawing a horizontal line across the data area of the
 * plot.
 *
 * @param g2  the graphics device.
 * @param dataArea  the data area.
 * @param value  the coordinate, where to draw the line.
 * @param stroke  the stroke to use.
 * @param paint  the paint to use.
 */
protected void drawHorizontalLine(Graphics2D g2, Rectangle2D dataArea,
                                  double value, Stroke stroke,
                                  Paint paint) {

    ValueAxis axis = getRangeAxis();
    if (getOrientation() == PlotOrientation.HORIZONTAL) {
        axis = getDomainAxis();
    }
    if (axis.getRange().contains(value)) {
        double yy = axis.valueToJava2D(value, dataArea, RectangleEdge.LEFT);
        Line2D line = new Line2D.Double(dataArea.getMinX(), yy, 
                dataArea.getMaxX(), yy);
        g2.setStroke(stroke);
        g2.setPaint(paint);
        g2.draw(line);
    }

}
 

import java.awt.geom.Rectangle2D; //導入方法依賴的package包/類
/**
 * Draws a horizontal line used to trace the mouse position to the vertical
 * axis.
 *
 * @param g2 the graphics device.
 * @param y  the y-coordinate of the trace line.
 */
private void drawVerticalAxisTrace(Graphics2D g2, int y) {

    Rectangle2D dataArea = getScreenDataArea();

    g2.setXORMode(Color.orange);
    if (((int) dataArea.getMinY() < y) && (y < (int) dataArea.getMaxY())) {

        if (this.horizontalTraceLine != null) {
            g2.draw(this.horizontalTraceLine);
            this.horizontalTraceLine.setLine((int) dataArea.getMinX(), y, 
                    (int) dataArea.getMaxX(), y);
        }
        else {
            this.horizontalTraceLine = new Line2D.Float(
                    (int) dataArea.getMinX(), y, (int) dataArea.getMaxX(), 
                    y);
        }
        g2.draw(this.horizontalTraceLine);
    }

    // Reset to the default 'overwrite' mode
    g2.setPaintMode();
}
 

import java.awt.geom.Rectangle2D; //導入方法依賴的package包/類
/**
 * Draws a grid line against the range axis.
 *
 * @param g2  the graphics device.
 * @param plot  the plot.
 * @param axis  the value axis.
 * @param dataArea  the area for plotting data (not yet adjusted for any 3D effect).
 * @param value  the value at which the grid line should be drawn.
 *
 */
public void drawRangeGridline(Graphics2D g2,
                              CategoryPlot plot,
                              ValueAxis axis,
                              Rectangle2D dataArea,
                              double value) {

    Range range = axis.getRange();
    if (!range.contains(value)) {
        return;
    }

    PlotOrientation orientation = plot.getOrientation();
    double v = axis.valueToJava2D(value, dataArea, plot.getRangeAxisEdge());
    Line2D line = null;
    if (orientation == PlotOrientation.HORIZONTAL) {
        line = new Line2D.Double(v, dataArea.getMinY(), v, dataArea.getMaxY());
    }
    else if (orientation == PlotOrientation.VERTICAL) {
        line = new Line2D.Double(dataArea.getMinX(), v, dataArea.getMaxX(), v);
    }

    Paint paint = plot.getRangeGridlinePaint();
    if (paint == null) {
        paint = CategoryPlot.DEFAULT_GRIDLINE_PAINT;
    }
    g2.setPaint(paint);

    Stroke stroke = plot.getRangeGridlineStroke();
    if (stroke == null) {
        stroke = CategoryPlot.DEFAULT_GRIDLINE_STROKE;
    }
    g2.setStroke(stroke);

    g2.draw(line);

}
 

import java.awt.geom.Rectangle2D; //導入方法依賴的package包/類
/**
 * Draws a grid line against the domain axis.
 * <P>
 * Note that this default implementation assumes that the horizontal axis is the domain axis.
 * If this is not the case, you will need to override this method.
 *
 * @param g2  the graphics device.
 * @param plot  the plot.
 * @param dataArea  the area for plotting data (not yet adjusted for any 3D effect).
 * @param value  the Java2D value at which the grid line should be drawn.
 */
public void drawDomainGridline(Graphics2D g2,
                               CategoryPlot plot,
                               Rectangle2D dataArea,
                               double value) {

    Line2D line = null;
    PlotOrientation orientation = plot.getOrientation();

    if (orientation == PlotOrientation.HORIZONTAL) {
        line = new Line2D.Double(dataArea.getMinX(), value, dataArea.getMaxX(), value);
    }
    else if (orientation == PlotOrientation.VERTICAL) {
        line = new Line2D.Double(value, dataArea.getMinY(), value, dataArea.getMaxY());
    }

    Paint paint = plot.getDomainGridlinePaint();
    if (paint == null) {
        paint = CategoryPlot.DEFAULT_GRIDLINE_PAINT;
    }
    g2.setPaint(paint);

    Stroke stroke = plot.getDomainGridlineStroke();
    if (stroke == null) {
        stroke = CategoryPlot.DEFAULT_GRIDLINE_STROKE;
    }
    g2.setStroke(stroke);

    g2.draw(line);

}
 

import java.awt.geom.Rectangle2D; //導入方法依賴的package包/類
public void runTest(Object ctx, int numReps) {
    TLExContext tlctx = (TLExContext)ctx;
    TextLayout tl = tlctx.tl;
    int numhits = tlctx.hits.length;
    Rectangle2D lb = tlctx.lb;
    TextHitInfo hit;
    for (int i = 0; i <= numhits; ++i) {
        float x = (float)(lb.getMinX() + lb.getWidth() * i / numhits);
        float y = (float)(lb.getMinY() + lb.getHeight() * i / numhits);
        hit = tl.hitTestChar(x, y, lb);
    }
}
 

import java.awt.geom.Rectangle2D; //導入方法依賴的package包/類
/**
 * Converts a data value to a coordinate in Java2D space, assuming that
 * the axis runs along one edge of the specified plotArea.
 * Note that it is possible for the coordinate to fall outside the
 * plotArea.
 *
 * @param value  the data value.
 * @param plotArea  the area for plotting the data.
 * @param edge  the axis location.
 *
 * @return the Java2D coordinate.
 * 
 * @deprecated Use valueToJava2D().
 */
public double translateValueToJava2D(double value, Rectangle2D plotArea,
                                     RectangleEdge edge) {

    Range range = getRange();
    double axisMin = switchedLog10(range.getLowerBound());
    double axisMax = switchedLog10(range.getUpperBound());

    double min = 0.0;
    double max = 0.0;
    if (RectangleEdge.isTopOrBottom(edge)) {
        min = plotArea.getMinX();
        max = plotArea.getMaxX();
    }
    else if (RectangleEdge.isLeftOrRight(edge)) {
        min = plotArea.getMaxY();
        max = plotArea.getMinY();
    }

    value = switchedLog10(value);

    if (isInverted()) {
        return max - (((value - axisMin) / (axisMax - axisMin)) * (max - min));
    }
    else {
        return min + (((value - axisMin) / (axisMax - axisMin)) * (max - min));
    }

}
 

import java.awt.geom.Rectangle2D; //導入方法依賴的package包/類
/**
 * Handles a 'mouse released' event. On Windows, we need to check if this is a popup trigger,
 * but only if we haven't already been tracking a zoom rectangle.
 * 
 * @param e
 *            information about the event.
 */

@Override
public void mouseReleased(MouseEvent e) {
	// if we've been panning, we need to reset now that the mouse is
	// released...
	if (this.panLast != null) {
		this.panLast = null;
		setCursor(Cursor.getDefaultCursor());
	} else if (this.selectionRectangle != null) {
		boolean hZoom = false;
		boolean vZoom = false;
		if (this.orientation == PlotOrientation.HORIZONTAL) {
			hZoom = this.rangeZoomable;
			vZoom = this.domainZoomable;
		} else {
			hZoom = this.domainZoomable;
			vZoom = this.rangeZoomable;
		}

		boolean zoomTrigger1 = hZoom && Math.abs(e.getX() - this.zoomPoint.getX()) >= this.zoomTriggerDistance;
		boolean zoomTrigger2 = vZoom && Math.abs(e.getY() - this.zoomPoint.getY()) >= this.zoomTriggerDistance;
		if (zoomTrigger1 || zoomTrigger2) {
			if (hZoom && e.getX() < this.zoomPoint.getX() || vZoom && e.getY() < this.zoomPoint.getY()) {
				restoreAutoBounds();
			} else {
				double x, y, w, h;
				Rectangle2D screenDataArea = getScreenDataArea((int) this.zoomPoint.getX(), (int) this.zoomPoint.getY());
				double maxX = screenDataArea.getMaxX();
				double maxY = screenDataArea.getMaxY();
				// for mouseReleased event, (horizontalZoom || verticalZoom)
				// will be true, so we can just test for either being false;
				// otherwise both are true
				if (!vZoom) {
					x = this.zoomPoint.getX();
					y = screenDataArea.getMinY();
					w = Math.min(this.selectionRectangle.getWidth(), maxX - this.zoomPoint.getX());
					h = screenDataArea.getHeight();
				} else if (!hZoom) {
					x = screenDataArea.getMinX();
					y = this.zoomPoint.getY();
					w = screenDataArea.getWidth();
					h = Math.min(this.selectionRectangle.getHeight(), maxY - this.zoomPoint.getY());
				} else {
					x = this.zoomPoint.getX();
					y = this.zoomPoint.getY();
					w = Math.min(this.selectionRectangle.getWidth(), maxX - this.zoomPoint.getX());
					h = Math.min(this.selectionRectangle.getHeight(), maxY - this.zoomPoint.getY());
				}
				Rectangle2D zoomArea = new Rectangle2D.Double(x, y, w, h);
				selectRectangle(zoomArea, e);
			}
			this.zoomPoint = null;
			this.selectionRectangle = null;
		} else {
			this.zoomPoint = null;
			this.selectionRectangle = null;
		}

	}

	else if (e.isPopupTrigger()) {
		if (this.popup != null) {
			displayPopupMenu(e.getX(), e.getY());
		}
	}

}
 

import java.awt.geom.Rectangle2D; //導入方法依賴的package包/類
/**
 * Draws the needle.
 *
 * @param g2  the graphics device.
 * @param plotArea  the plot area.
 * @param rotate  the rotation point.
 * @param angle  the angle.
 */
protected void drawNeedle(Graphics2D g2, Rectangle2D plotArea, 
                          Point2D rotate, double angle) {

    GeneralPath shape1 = new GeneralPath();
    GeneralPath shape2 = new GeneralPath();
    GeneralPath shape3 = new GeneralPath();

    float minX = (float) plotArea.getMinX();
    float minY = (float) plotArea.getMinY();
    float maxX = (float) plotArea.getMaxX();
    float maxY = (float) plotArea.getMaxY();
    //float midX = (float) (minX + (plotArea.getWidth() * getRotateX()));
    //float midY = (float) (minY + (plotArea.getHeight() * getRotateY()));
    float midX = (float) (minX + (plotArea.getWidth() * 0.5));
    float midY = (float) (minY + (plotArea.getHeight() * 0.8));
    float y = maxY - (2 * (maxY - midY));
    if (y < minY) {
        y = minY;
    }
    shape1.moveTo(minX, midY);
    shape1.lineTo(midX, minY);
    shape1.lineTo(midX, y);
    shape1.closePath();

    shape2.moveTo(maxX, midY);
    shape2.lineTo(midX, minY);
    shape2.lineTo(midX, y);
    shape2.closePath();

    shape3.moveTo(minX, midY);
    shape3.lineTo(midX, maxY);
    shape3.lineTo(maxX, midY);
    shape3.lineTo(midX, y);
    shape3.closePath();

    Shape s1 = shape1;
    Shape s2 = shape2;
    Shape s3 = shape3;

    if ((rotate != null) && (angle != 0)) {
        /// we have rotation huston, please spin me
        getTransform().setToRotation(angle, rotate.getX(), rotate.getY());
        s1 = shape1.createTransformedShape(transform);
        s2 = shape2.createTransformedShape(transform);
        s3 = shape3.createTransformedShape(transform);
    }


    if (getHighlightPaint() != null) {
        g2.setPaint(getHighlightPaint());
        g2.fill(s3);
    }

    if (getFillPaint() != null) {
        g2.setPaint(getFillPaint());
        g2.fill(s1);
        g2.fill(s2);
    }


    if (getOutlinePaint() != null) {
        g2.setStroke(getOutlineStroke());
        g2.setPaint(getOutlinePaint());
        g2.draw(s1);
        g2.draw(s2);
        g2.draw(s3);
    }
}
 

import java.awt.geom.Rectangle2D; //導入方法依賴的package包/類
/**
 * Draws the needle.
 *
 * @param g2  the graphics device.
 * @param plotArea  the plot area.
 * @param rotate  the rotation point.
 * @param angle  the angle.
 */
protected void drawNeedle(Graphics2D g2, Rectangle2D plotArea, 
                          Point2D rotate, double angle) {

    GeneralPath shape1 = new GeneralPath();
    GeneralPath shape2 = new GeneralPath();
    float minX = (float) plotArea.getMinX();
    float minY = (float) plotArea.getMinY();
    float maxX = (float) plotArea.getMaxX();
    float maxY = (float) plotArea.getMaxY();
    float midX = (float) (minX + (plotArea.getWidth() / 2));
    float midY = (float) (minY + (plotArea.getHeight() / 2));

    shape1.moveTo(minX, midY);
    shape1.lineTo(midX, minY);
    shape1.lineTo(maxX, midY);
    shape1.closePath();

    shape2.moveTo(minX, midY);
    shape2.lineTo(midX, maxY);
    shape2.lineTo(maxX, midY);
    shape2.closePath();

    if ((rotate != null) && (angle != 0)) {
        /// we have rotation huston, please spin me
        getTransform().setToRotation(angle, rotate.getX(), rotate.getY());
        shape1.transform(getTransform());
        shape2.transform(getTransform());
    }

    if (getFillPaint() != null) {
        g2.setPaint(getFillPaint());
        g2.fill(shape1);
    }

    if (getHighlightPaint() != null) {
        g2.setPaint(getHighlightPaint());
        g2.fill(shape2);
    }

    if (getOutlinePaint() != null) {
        g2.setStroke(getOutlineStroke());
        g2.setPaint(getOutlinePaint());
        g2.draw(shape1);
        g2.draw(shape2);
    }
}