本文整理匯總了Java中javax.crypto.ShortBufferException類的典型用法代碼示例。如果您正苦於以下問題:Java ShortBufferException類的具體用法?Java ShortBufferException怎麽用?Java ShortBufferException使用的例子?那麽, 這裏精選的類代碼示例或許可以為您提供幫助。
ShortBufferException類屬於javax.crypto包,在下文中一共展示了ShortBufferException類的15個代碼示例,這些例子默認根據受歡迎程度排序。您可以為喜歡或者感覺有用的代碼點讚,您的評價將有助於係統推薦出更棒的Java代碼示例。
示例1: engineUpdate
import javax.crypto.ShortBufferException; //導入依賴的package包/類
protected int engineUpdate(
byte[] input,
int inputOffset,
int inputLen,
byte[] output,
int outputOffset)
throws ShortBufferException
{
try
{
return cipher.processBytes(input, inputOffset, inputLen, output, outputOffset);
}
catch (DataLengthException e)
{
throw new ShortBufferException(e.getMessage());
}
}
示例2: engineDoFinal
import javax.crypto.ShortBufferException; //導入依賴的package包/類
@Override
protected byte[] engineDoFinal(byte[] input, int inputOffset, int inputLen)
throws IllegalBlockSizeException, BadPaddingException {
int maxSize = engineGetOutputSize(inputLen);
byte[] output = new byte[maxSize];
int finalSize;
try {
finalSize = doFinal(input, inputOffset, inputLen, output, 0);
} catch (ShortBufferException e) {
// This shouldn't be possible rethrow as RuntimeException
throw new RuntimeException("Short buffer exception shouldn't be possible from here.");
}
if ( maxSize == finalSize ) {
return output;
} else {
// TODO: Special doFinal to avoid this copy
byte[] exact = new byte[finalSize];
System.arraycopy(output, 0, exact, 0, finalSize);
return exact;
}
}
示例3: update
import javax.crypto.ShortBufferException; //導入依賴的package包/類
public int update(ByteBuffer input, ByteBuffer output)
throws ShortBufferException {
//checkState();
Preconditions.checkArgument(input.isDirect() && output.isDirect(),
"Direct buffers are required.");
try {
int outputPosition = output.position();
if (mode == TRANSFORM_MODE)
transform(input, output);
else if (mode == ENCRYPT_MODE)
encrypt(input, output);
else
decrypt(input, output);
return output.position() - outputPosition;
} catch (IOException e) {
e.printStackTrace();
}
return 0;
}
示例4: doFinal
import javax.crypto.ShortBufferException; //導入依賴的package包/類
/**
* Finish a multiple-part encryption or decryption operation (depending on
* how this cipher was initialized).
*
* @param input the input buffer
* @param inOff the offset where the input starts
* @param inLen the input length
* @param output the buffer for the result
* @param outOff the offset where the result is stored
* @return the output length
* @throws ShortBufferException if the output buffer is too small to hold the result.
* @throws IllegalBlockSizeException if the plaintext or ciphertext size is too large.
* @throws BadPaddingException if the ciphertext is invalid.
*/
public final int doFinal(byte[] input, int inOff, int inLen, byte[] output,
int outOff)
throws ShortBufferException, IllegalBlockSizeException,
BadPaddingException
{
if (output.length < getOutputSize(inLen))
{
throw new ShortBufferException("Output buffer too short.");
}
byte[] out = doFinal(input, inOff, inLen);
System.arraycopy(out, 0, output, outOff, out.length);
return out.length;
}
示例5: engineUpdate
import javax.crypto.ShortBufferException; //導入依賴的package包/類
protected int engineUpdate(
byte[] input,
int inputOffset,
int inputLen,
byte[] output,
int outputOffset)
throws ShortBufferException
{
try
{
cipher.processBytes(input, inputOffset, inputLen, output, outputOffset);
return inputLen;
}
catch (DataLengthException e)
{
throw new ShortBufferException(e.getMessage());
}
}
示例6: main
import javax.crypto.ShortBufferException; //導入依賴的package包/類
public static void main(String[] args) throws ShortBufferException,
IllegalBlockSizeException, BadPaddingException {
byte[] plainText = new byte[801];
// Initialization
RandomFactory.getRandom().nextBytes(plainText);
Cipher ci = new NullCipher();
// Encryption
byte[] cipherText = new byte[ci.getOutputSize(plainText.length)];
int offset = ci.update(plainText, 0, plainText.length, cipherText, 0);
ci.doFinal(cipherText, offset);
// Decryption
byte[] recoveredText = new byte[ci.getOutputSize(cipherText.length)];
int len = ci.doFinal(cipherText, 0, cipherText.length, recoveredText);
// Comparison
if (len != plainText.length ||
!TestUtilities.equalsBlock(plainText, cipherText, len) ||
!TestUtilities.equalsBlock(plainText, recoveredText, len)) {
throw new RuntimeException(
"Test failed because plainText not equal to cipherText and revoveredText");
}
}
示例7: engineGenerateSecret
import javax.crypto.ShortBufferException; //導入依賴的package包/類
protected int engineGenerateSecret(
byte[] sharedSecret,
int offset)
throws IllegalStateException, ShortBufferException
{
byte[] secret = engineGenerateSecret();
if (sharedSecret.length - offset < secret.length)
{
throw new ShortBufferException(kaAlgorithm + " key agreement: need " + secret.length + " bytes");
}
System.arraycopy(secret, 0, sharedSecret, offset, secret.length);
return secret.length;
}
示例8: engineTransformBlock
import javax.crypto.ShortBufferException; //導入依賴的package包/類
/**
* This method is called whenever a full block needs to be
* encrypted/decrypted. The input block is contained in input.The
* transformed block is written into output starting at otputOfset. The
* number of bytes written is returned.
*
* @param input
* - byte[]
* @param inputOffset
* -int
* @param inputLenth
* -int
* @param output
* -byte[]
* @param outputOffset
* -int
* @return The number of bytes written.
* @throws ShortBufferException
*/
protected final int engineTransformBlock(byte[] input, int inputOffset,
int inputLenth, byte[] output, int outputOffset)
throws ShortBufferException {
if (stateMode == Cipher.ENCRYPT_MODE)
try {
return encryptBlock(input, inputOffset, inputLenth, output,
outputOffset);
} catch (Exception e) {
e.printStackTrace();
}
else if (stateMode == Cipher.DECRYPT_MODE)
return decryptBlock(input, inputOffset, inputLenth, output,
outputOffset);
return 0;
}
示例9: engineDoFinal
import javax.crypto.ShortBufferException; //導入依賴的package包/類
/**
* Calls the second overloaded version of the same method.
*/
protected final byte[] engineDoFinal(byte[] input, int inputOffset, int inputLen)
throws IllegalBlockSizeException, BadPaddingException {
int length = 0;
byte[] out = new byte[engineGetOutputSize(inputLen)];
try {
length = engineDoFinal(input, inputOffset, inputLen, out, 0);
} catch (ShortBufferException sbe) {
}
if (length < out.length) {
byte[] smaller = new byte[length];
System.arraycopy(out, 0, smaller, 0, length);
}
return out;
}
示例10: engineDoFinal
import javax.crypto.ShortBufferException; //導入依賴的package包/類
/**
* Calls encrypt or decrypt based on the state of the cipher. Creates a
* single input array from the supplied input data. And returns number of
* bytes stored in output.
*
* @param input
* - the input buffer
* @param inputOffset
* - the offset in input where the input starts always zero
* @param inputLen
* - the input length
* @param output
* - the buffer for the result
* @param outputOffset
* - the offset in output where the result is stored
* @return the number of bytes stored in output
*/
protected final int engineDoFinal(byte[] input, int inputOffset, int inputLen,
byte[] output, int outputOffset) throws ShortBufferException,
IllegalBlockSizeException, BadPaddingException {
// Create a single array of input data
byte[] totalInput = new byte[inputLen ];
if (inputLen > 0)
System.arraycopy(input, inputOffset, totalInput, 0,
inputLen);
if (stateMode == Cipher.ENCRYPT_MODE)
try {
return encrypt(input, inputOffset, inputLen, output,
outputOffset);
} catch (Exception e) {
e.printStackTrace();
}
else if (stateMode == Cipher.DECRYPT_MODE)
return decrypt(input, inputOffset, inputLen, output,
outputOffset);
return 0;
}
示例11: runAll
import javax.crypto.ShortBufferException; //導入依賴的package包/類
public void runAll() throws InvalidKeyException,
NoSuchPaddingException, InvalidAlgorithmParameterException,
ShortBufferException, IllegalBlockSizeException,
BadPaddingException, NoSuchAlgorithmException,
NoSuchProviderException {
for (String mode : MODES) {
for (String padding : PADDINGS) {
if (!isMultipleKeyLengthSupported()) {
runTest(mode, padding, minKeySize);
} else {
int keySize = maxKeySize;
while (keySize >= minKeySize) {
out.println("With Key Strength: " + keySize);
runTest(mode, padding, keySize);
keySize -= KEYCUTTER;
}
}
}
}
}
示例12: padWithLen
import javax.crypto.ShortBufferException; //導入依賴的package包/類
/**
* Adds the given number of padding bytes to the data input.
* The value of the padding bytes is determined
* by the specific padding mechanism that implements this
* interface.
*
* @param in the input buffer with the data to pad
* @param off the offset in <code>in</code> where the padding bytes
* are appended
* @param len the number of padding bytes to add
*
* @exception ShortBufferException if <code>in</code> is too small to hold
* the padding bytes
*/
public void padWithLen(byte[] in, int off, int len)
throws ShortBufferException
{
if (in == null)
return;
if ((off + len) > in.length) {
throw new ShortBufferException("Buffer too small to hold padding");
}
byte paddingOctet = (byte) (len & 0xff);
byte[] padding = new byte[len];
SunJCE.getRandom().nextBytes(padding);
padding[len-1] = paddingOctet;
System.arraycopy(padding, 0, in, off, len);
return;
}
示例13: padWithLen
import javax.crypto.ShortBufferException; //導入依賴的package包/類
/**
* Adds the given number of padding bytes to the data input.
* The value of the padding bytes is determined
* by the specific padding mechanism that implements this
* interface.
*
* @param in the input buffer with the data to pad
* @param off the offset in <code>in</code> where the padding bytes
* are appended
* @param len the number of padding bytes to add
*
* @exception ShortBufferException if <code>in</code> is too small to hold
* the padding bytes
*/
public void padWithLen(byte[] in, int off, int len)
throws ShortBufferException
{
if (in == null)
return;
if ((off + len) > in.length) {
throw new ShortBufferException("Buffer too small to hold padding");
}
byte paddingOctet = (byte) (len & 0xff);
for (int i = 0; i < len; i++) {
in[i + off] = paddingOctet;
}
return;
}
示例14: hash
import javax.crypto.ShortBufferException; //導入依賴的package包/類
private byte[] hash(Cipher aes, byte[] h, byte[] nonce, byte[] plaintext, byte[] data) {
final Polyval polyval = new Polyval(h);
polyval.update(data); // hash data with padding
polyval.update(plaintext); // hash plaintext with padding
// hash data and plaintext lengths in bits with padding
final byte[] block = new byte[AES_BLOCK_SIZE];
Bytes.putLong((long) data.length * 8, block, 0);
Bytes.putLong((long) plaintext.length * 8, block, 8);
polyval.updateBlock(block, 0);
polyval.digest(block);
for (int i = 0; i < nonce.length; i++) {
block[i] ^= nonce[i];
}
block[block.length - 1] &= (byte) ~0x80;
// encrypt polyval hash to produce tag
try {
aes.update(block, 0, block.length, block, 0);
} catch (ShortBufferException e) {
throw new IllegalStateException(e);
}
return block;
}
示例15: subKey
import javax.crypto.ShortBufferException; //導入依賴的package包/類
private byte[] subKey(int ctrStart, int ctrEnd, byte[] nonce) {
final byte[] counter = new byte[AES_BLOCK_SIZE];
System.arraycopy(nonce, 0, counter, counter.length - nonce.length, nonce.length);
final byte[] key = new byte[(ctrEnd - ctrStart + 1) * 8];
final byte[] block = new byte[AES_BLOCK_SIZE];
for (int i = ctrStart; i <= ctrEnd; i++) {
Bytes.putInt(i, counter);
try {
aes.update(counter, 0, AES_BLOCK_SIZE, block, 0);
} catch (ShortBufferException e) {
throw new IllegalStateException(e);
}
System.arraycopy(block, 0, key, (i - ctrStart) * 8, 8);
}
return key;
}