本文整理匯總了Java中org.quartz.Trigger.MISFIRE_INSTRUCTION_IGNORE_MISFIRE_POLICY屬性的典型用法代碼示例。如果您正苦於以下問題：Java Trigger.MISFIRE_INSTRUCTION_IGNORE_MISFIRE_POLICY屬性的具體用法？Java Trigger.MISFIRE_INSTRUCTION_IGNORE_MISFIRE_POLICY怎麽用？Java Trigger.MISFIRE_INSTRUCTION_IGNORE_MISFIRE_POLICY使用的例子？那麽, 這裏精選的屬性代碼示例或許可以為您提供幫助。您也可以進一步了解該屬性所在類org.quartz.Trigger的用法示例。
在下文中一共展示了Trigger.MISFIRE_INSTRUCTION_IGNORE_MISFIRE_POLICY屬性的5個代碼示例，這些例子默認根據受歡迎程度排序。您可以為喜歡或者感覺有用的代碼點讚，您的評價將有助於係統推薦出更棒的Java代碼示例。
示例1: updateAfterMisfire
/**
* <p>
* Updates the <code>CronTrigger</code>'s state based on the
* MISFIRE_INSTRUCTION_XXX that was selected when the <code>CronTrigger</code>
* was created.
* </p>
*
* <p>
* If the misfire instruction is set to MISFIRE_INSTRUCTION_SMART_POLICY,
* then the following scheme will be used: <br>
* <ul>
* <li>The instruction will be interpreted as <code>MISFIRE_INSTRUCTION_FIRE_ONCE_NOW</code>
* </ul>
* </p>
*/
@Override
public void updateAfterMisfire(org.quartz.Calendar cal) {
int instr = getMisfireInstruction();
if(instr == Trigger.MISFIRE_INSTRUCTION_IGNORE_MISFIRE_POLICY)
return;
if (instr == MISFIRE_INSTRUCTION_SMART_POLICY) {
instr = MISFIRE_INSTRUCTION_FIRE_ONCE_NOW;
}
if (instr == MISFIRE_INSTRUCTION_DO_NOTHING) {
Date newFireTime = getFireTimeAfter(new Date());
while (newFireTime != null && cal != null
&& !cal.isTimeIncluded(newFireTime.getTime())) {
newFireTime = getFireTimeAfter(newFireTime);
}
setNextFireTime(newFireTime);
} else if (instr == MISFIRE_INSTRUCTION_FIRE_ONCE_NOW) {
setNextFireTime(new Date());
}
}
示例2: applyMisfire
boolean applyMisfire(TriggerWrapper tw) throws JobPersistenceException {
long misfireTime = System.currentTimeMillis();
if (getMisfireThreshold() > 0) {
misfireTime -= getMisfireThreshold();
}
Date tnft = tw.getNextFireTime();
if (tnft == null || tnft.getTime() > misfireTime
|| tw.getMisfireInstruction() == Trigger.MISFIRE_INSTRUCTION_IGNORE_MISFIRE_POLICY) { return false; }
Calendar cal = null;
if (tw.getCalendarName() != null) {
cal = retrieveCalendar(tw.getCalendarName());
}
signaler.notifyTriggerListenersMisfired(tw.getTriggerClone());
tw.updateAfterMisfire(cal, triggerFacade);
if (tw.getNextFireTime() == null) {
tw.setState(TriggerState.COMPLETE, terracottaClientId, triggerFacade);
signaler.notifySchedulerListenersFinalized(tw.getTriggerClone());
timeTriggers.remove(tw);
} else if (tnft.equals(tw.getNextFireTime())) { return false; }
return true;
}
示例3: updateAfterMisfire
/**
* <p>
* Updates the <code>DateIntervalTrigger</code>'s state based on the
* MISFIRE_INSTRUCTION_XXX that was selected when the <code>DateIntervalTrigger</code>
* was created.
* </p>
*
* <p>
* If the misfire instruction is set to MISFIRE_INSTRUCTION_SMART_POLICY,
* then the following scheme will be used: <br>
* <ul>
* <li>The instruction will be interpreted as <code>MISFIRE_INSTRUCTION_FIRE_ONCE_NOW</code>
* </ul>
* </p>
*/
@Override
public void updateAfterMisfire(org.quartz.Calendar cal) {
int instr = getMisfireInstruction();
if(instr == Trigger.MISFIRE_INSTRUCTION_IGNORE_MISFIRE_POLICY)
return;
if (instr == MISFIRE_INSTRUCTION_SMART_POLICY) {
instr = MISFIRE_INSTRUCTION_FIRE_ONCE_NOW;
}
if (instr == MISFIRE_INSTRUCTION_DO_NOTHING) {
Date newFireTime = getFireTimeAfter(new Date());
while (newFireTime != null && cal != null
&& !cal.isTimeIncluded(newFireTime.getTime())) {
newFireTime = getFireTimeAfter(newFireTime);
}
setNextFireTime(newFireTime);
} else if (instr == MISFIRE_INSTRUCTION_FIRE_ONCE_NOW) {
// fire once now...
setNextFireTime(new Date());
// the new fire time afterward will magically preserve the original
// time of day for firing for day/week/month interval triggers,
// because of the way getFireTimeAfter() works - in its always restarting
// computation from the start time.
}
}
示例4: applyMisfire
protected boolean applyMisfire(TriggerWrapper tw) {
long misfireTime = System.currentTimeMillis();
if (getMisfireThreshold() > 0) {
misfireTime -= getMisfireThreshold();
}
Date tnft = tw.trigger.getNextFireTime();
if (tnft == null || tnft.getTime() > misfireTime
|| tw.trigger.getMisfireInstruction() == Trigger.MISFIRE_INSTRUCTION_IGNORE_MISFIRE_POLICY) {
return false;
}
Calendar cal = null;
if (tw.trigger.getCalendarName() != null) {
cal = retrieveCalendar(tw.trigger.getCalendarName());
}
signaler.notifyTriggerListenersMisfired((OperableTrigger)tw.trigger.clone());
tw.trigger.updateAfterMisfire(cal);
if (tw.trigger.getNextFireTime() == null) {
tw.state = TriggerWrapper.STATE_COMPLETE;
signaler.notifySchedulerListenersFinalized(tw.trigger);
synchronized (lock) {
timeTriggers.remove(tw);
}
} else if (tnft.equals(tw.trigger.getNextFireTime())) {
return false;
}
return true;
}
示例5: updateAfterMisfire
/**
* <p>
* Updates the <code>DailyTimeIntervalTrigger</code>'s state based on the
* MISFIRE_INSTRUCTION_XXX that was selected when the <code>DailyTimeIntervalTrigger</code>
* was created.
* </p>
*
* <p>
* If the misfire instruction is set to MISFIRE_INSTRUCTION_SMART_POLICY,
* then the following scheme will be used: <br>
* <ul>
* <li>The instruction will be interpreted as <code>MISFIRE_INSTRUCTION_FIRE_ONCE_NOW</code>
* </ul>
* </p>
*/
@Override
public void updateAfterMisfire(org.quartz.Calendar cal) {
int instr = getMisfireInstruction();
if(instr == Trigger.MISFIRE_INSTRUCTION_IGNORE_MISFIRE_POLICY)
return;
if (instr == MISFIRE_INSTRUCTION_SMART_POLICY) {
instr = MISFIRE_INSTRUCTION_FIRE_ONCE_NOW;
}
if (instr == MISFIRE_INSTRUCTION_DO_NOTHING) {
Date newFireTime = getFireTimeAfter(new Date());
while (newFireTime != null && cal != null
&& !cal.isTimeIncluded(newFireTime.getTime())) {
newFireTime = getFireTimeAfter(newFireTime);
}
setNextFireTime(newFireTime);
} else if (instr == MISFIRE_INSTRUCTION_FIRE_ONCE_NOW) {
// fire once now...
setNextFireTime(new Date());
// the new fire time afterward will magically preserve the original
// time of day for firing for day/week/month interval triggers,
// because of the way getFireTimeAfter() works - in its always restarting
// computation from the start time.
}
}