Golang options.ServerRunOptions類代碼示例

// Run runs the specified APIServer.  This should never exit.
func Run(s *options.ServerRunOptions) error {
	// set defaults
	if err := s.GenericServerRunOptions.DefaultAdvertiseAddress(s.SecureServing, s.InsecureServing); err != nil {
		return err
	}
	serviceIPRange, apiServerServiceIP, err := master.DefaultServiceIPRange(s.ServiceClusterIPRange)
	if err != nil {
		return fmt.Errorf("error determining service IP ranges: %v", err)
	}
	if err := s.SecureServing.MaybeDefaultWithSelfSignedCerts(s.GenericServerRunOptions.AdvertiseAddress.String(), apiServerServiceIP); err != nil {
		return fmt.Errorf("error creating self-signed certificates: %v", err)
	}
	if err := s.CloudProvider.DefaultExternalHost(s.GenericServerRunOptions); err != nil {
		return fmt.Errorf("error setting the external host value: %v", err)
	}

	s.Authentication.ApplyAuthorization(s.Authorization)

	// validate options
	if errs := s.Validate(); len(errs) != 0 {
		return utilerrors.NewAggregate(errs)
	}

	// create config from options
	genericConfig := genericapiserver.NewConfig().
		ApplyOptions(s.GenericServerRunOptions).
		ApplyInsecureServingOptions(s.InsecureServing)

	if _, err := genericConfig.ApplySecureServingOptions(s.SecureServing); err != nil {
		return fmt.Errorf("failed to configure https: %s", err)
	}
	if err = s.Authentication.Apply(genericConfig); err != nil {
		return fmt.Errorf("failed to configure authentication: %s", err)
	}

	capabilities.Initialize(capabilities.Capabilities{
		AllowPrivileged: s.AllowPrivileged,
		// TODO(vmarmol): Implement support for HostNetworkSources.
		PrivilegedSources: capabilities.PrivilegedSources{
			HostNetworkSources: []string{},
			HostPIDSources:     []string{},
			HostIPCSources:     []string{},
		},
		PerConnectionBandwidthLimitBytesPerSec: s.MaxConnectionBytesPerSec,
	})

	// Setup nodeTunneler if needed
	var nodeTunneler tunneler.Tunneler
	var proxyDialerFn utilnet.DialFunc
	if len(s.SSHUser) > 0 {
		// Get ssh key distribution func, if supported
		var installSSHKey tunneler.InstallSSHKey
		cloud, err := cloudprovider.InitCloudProvider(s.CloudProvider.CloudProvider, s.CloudProvider.CloudConfigFile)
		if err != nil {
			return fmt.Errorf("cloud provider could not be initialized: %v", err)
		}
		if cloud != nil {
			if instances, supported := cloud.Instances(); supported {
				installSSHKey = instances.AddSSHKeyToAllInstances
			}
		}
		if s.KubeletConfig.Port == 0 {
			return fmt.Errorf("must enable kubelet port if proxy ssh-tunneling is specified")
		}
		if s.KubeletConfig.ReadOnlyPort == 0 {
			return fmt.Errorf("must enable kubelet readonly port if proxy ssh-tunneling is specified")
		}
		// Set up the nodeTunneler
		// TODO(cjcullen): If we want this to handle per-kubelet ports or other
		// kubelet listen-addresses, we need to plumb through options.
		healthCheckPath := &url.URL{
			Scheme: "http",
			Host:   net.JoinHostPort("127.0.0.1", strconv.FormatUint(uint64(s.KubeletConfig.ReadOnlyPort), 10)),
			Path:   "healthz",
		}
		nodeTunneler = tunneler.New(s.SSHUser, s.SSHKeyfile, healthCheckPath, installSSHKey)

		// Use the nodeTunneler's dialer to connect to the kubelet
		s.KubeletConfig.Dial = nodeTunneler.Dial
		// Use the nodeTunneler's dialer when proxying to pods, services, and nodes
		proxyDialerFn = nodeTunneler.Dial
	}

	// Proxying to pods and services is IP-based... don't expect to be able to verify the hostname
	proxyTLSClientConfig := &tls.Config{InsecureSkipVerify: true}

	if s.Etcd.StorageConfig.DeserializationCacheSize == 0 {
		// When size of cache is not explicitly set, estimate its size based on
		// target memory usage.
		glog.V(2).Infof("Initializing deserialization cache size based on %dMB limit", s.GenericServerRunOptions.TargetRAMMB)

		// This is the heuristics that from memory capacity is trying to infer
		// the maximum number of nodes in the cluster and set cache sizes based
		// on that value.
		// From our documentation, we officially recomment 120GB machines for
		// 2000 nodes, and we scale from that point. Thus we assume ~60MB of
		// capacity per node.
		// TODO: We may consider deciding that some percentage of memory will
		// be used for the deserialization cache and divide it by the max object
//.........這裏部分代碼省略.........

// Run runs the specified APIServer.  This should never exit.
func Run(s *options.ServerRunOptions) error {
	genericvalidation.VerifyEtcdServersList(s.GenericServerRunOptions)
	genericapiserver.DefaultAndValidateRunOptions(s.GenericServerRunOptions)
	genericConfig := genericapiserver.NewConfig(). // create the new config
							ApplyOptions(s.GenericServerRunOptions). // apply the options selected
							Complete()                               // set default values based on the known values

	serviceIPRange, apiServerServiceIP, err := genericapiserver.DefaultServiceIPRange(s.GenericServerRunOptions.ServiceClusterIPRange)
	if err != nil {
		glog.Fatalf("Error determining service IP ranges: %v", err)
	}
	if err := genericConfig.MaybeGenerateServingCerts(apiServerServiceIP); err != nil {
		glog.Fatalf("Failed to generate service certificate: %v", err)
	}

	capabilities.Initialize(capabilities.Capabilities{
		AllowPrivileged: s.AllowPrivileged,
		// TODO(vmarmol): Implement support for HostNetworkSources.
		PrivilegedSources: capabilities.PrivilegedSources{
			HostNetworkSources: []string{},
			HostPIDSources:     []string{},
			HostIPCSources:     []string{},
		},
		PerConnectionBandwidthLimitBytesPerSec: s.MaxConnectionBytesPerSec,
	})

	// Setup tunneler if needed
	var tunneler genericapiserver.Tunneler
	var proxyDialerFn apiserver.ProxyDialerFunc
	if len(s.SSHUser) > 0 {
		// Get ssh key distribution func, if supported
		var installSSH genericapiserver.InstallSSHKey
		cloud, err := cloudprovider.InitCloudProvider(s.GenericServerRunOptions.CloudProvider, s.GenericServerRunOptions.CloudConfigFile)
		if err != nil {
			glog.Fatalf("Cloud provider could not be initialized: %v", err)
		}
		if cloud != nil {
			if instances, supported := cloud.Instances(); supported {
				installSSH = instances.AddSSHKeyToAllInstances
			}
		}
		if s.KubeletConfig.Port == 0 {
			glog.Fatalf("Must enable kubelet port if proxy ssh-tunneling is specified.")
		}
		// Set up the tunneler
		// TODO(cjcullen): If we want this to handle per-kubelet ports or other
		// kubelet listen-addresses, we need to plumb through options.
		healthCheckPath := &url.URL{
			Scheme: "https",
			Host:   net.JoinHostPort("127.0.0.1", strconv.FormatUint(uint64(s.KubeletConfig.Port), 10)),
			Path:   "healthz",
		}
		tunneler = genericapiserver.NewSSHTunneler(s.SSHUser, s.SSHKeyfile, healthCheckPath, installSSH)

		// Use the tunneler's dialer to connect to the kubelet
		s.KubeletConfig.Dial = tunneler.Dial
		// Use the tunneler's dialer when proxying to pods, services, and nodes
		proxyDialerFn = tunneler.Dial
	}

	// Proxying to pods and services is IP-based... don't expect to be able to verify the hostname
	proxyTLSClientConfig := &tls.Config{InsecureSkipVerify: true}

	if s.GenericServerRunOptions.StorageConfig.DeserializationCacheSize == 0 {
		// When size of cache is not explicitly set, estimate its size based on
		// target memory usage.
		glog.V(2).Infof("Initalizing deserialization cache size based on %dMB limit", s.GenericServerRunOptions.TargetRAMMB)

		// This is the heuristics that from memory capacity is trying to infer
		// the maximum number of nodes in the cluster and set cache sizes based
		// on that value.
		// From our documentation, we officially recomment 120GB machines for
		// 2000 nodes, and we scale from that point. Thus we assume ~60MB of
		// capacity per node.
		// TODO: We may consider deciding that some percentage of memory will
		// be used for the deserialization cache and divide it by the max object
		// size to compute its size. We may even go further and measure
		// collective sizes of the objects in the cache.
		clusterSize := s.GenericServerRunOptions.TargetRAMMB / 60
		s.GenericServerRunOptions.StorageConfig.DeserializationCacheSize = 25 * clusterSize
		if s.GenericServerRunOptions.StorageConfig.DeserializationCacheSize < 1000 {
			s.GenericServerRunOptions.StorageConfig.DeserializationCacheSize = 1000
		}
	}

	storageGroupsToEncodingVersion, err := s.GenericServerRunOptions.StorageGroupsToEncodingVersion()
	if err != nil {
		glog.Fatalf("error generating storage version map: %s", err)
	}
	storageFactory, err := genericapiserver.BuildDefaultStorageFactory(
		s.GenericServerRunOptions.StorageConfig, s.GenericServerRunOptions.DefaultStorageMediaType, api.Codecs,
		genericapiserver.NewDefaultResourceEncodingConfig(), storageGroupsToEncodingVersion,
		// FIXME: this GroupVersionResource override should be configurable
		[]schema.GroupVersionResource{batch.Resource("cronjobs").WithVersion("v2alpha1")},
		master.DefaultAPIResourceConfigSource(), s.GenericServerRunOptions.RuntimeConfig)
	if err != nil {
		glog.Fatalf("error in initializing storage factory: %s", err)
	}
	storageFactory.AddCohabitatingResources(batch.Resource("jobs"), extensions.Resource("jobs"))
//.........這裏部分代碼省略.........