當前位置: 首頁>>代碼示例>>Golang>>正文


Golang net.Stream類代碼示例

本文整理匯總了Golang中gx/ipfs/QmUBogf4nUefBjmYjn6jfsfPJRkmDGSeMhNj4usRKq69f4/go-libp2p/p2p/net.Stream的典型用法代碼示例。如果您正苦於以下問題:Golang Stream類的具體用法?Golang Stream怎麽用?Golang Stream使用的例子?那麽, 這裏精選的類代碼示例或許可以為您提供幫助。


在下文中一共展示了Stream類的6個代碼示例,這些例子默認根據受歡迎程度排序。您可以為喜歡或者感覺有用的代碼點讚,您的評價將有助於係統推薦出更棒的Golang代碼示例。

示例1: HandleMessage

func (d *Diagnostics) HandleMessage(ctx context.Context, s inet.Stream) error {

	cr := ctxio.NewReader(ctx, s)
	cw := ctxio.NewWriter(ctx, s)
	r := ggio.NewDelimitedReader(cr, inet.MessageSizeMax) // maxsize
	w := ggio.NewDelimitedWriter(cw)

	// deserialize msg
	pmes := new(pb.Message)
	if err := r.ReadMsg(pmes); err != nil {
		log.Debugf("Failed to decode protobuf message: %v", err)
		return nil
	}

	// Print out diagnostic
	log.Infof("[peer: %s] Got message from [%s]\n",
		d.self.Pretty(), s.Conn().RemotePeer())

	// Make sure we havent already handled this request to prevent loops
	if err := d.startDiag(pmes.GetDiagID()); err != nil {
		return nil
	}

	resp := newMessage(pmes.GetDiagID())
	resp.Data = d.getDiagInfo().Marshal()
	if err := w.WriteMsg(resp); err != nil {
		log.Debugf("Failed to write protobuf message over stream: %s", err)
		return err
	}

	timeout := pmes.GetTimeoutDuration()
	if timeout < HopTimeoutDecrement {
		return fmt.Errorf("timeout too short: %s", timeout)
	}
	ctx, cancel := context.WithTimeout(ctx, timeout)
	defer cancel()
	pmes.SetTimeoutDuration(timeout - HopTimeoutDecrement)

	dpeers, err := d.getDiagnosticFromPeers(ctx, d.getPeers(), pmes)
	if err != nil {
		log.Debugf("diagnostic from peers err: %s", err)
		return err
	}
	for b := range dpeers {
		resp := newMessage(pmes.GetDiagID())
		resp.Data = b.Marshal()
		if err := w.WriteMsg(resp); err != nil {
			log.Debugf("Failed to write protobuf message over stream: %s", err)
			return err
		}
	}

	return nil
}
開發者ID:musha68k,項目名稱:go-ipfs,代碼行數:54,代碼來源:diag.go

示例2: handleNewMessage

func (dht *IpfsDHT) handleNewMessage(s inet.Stream) {
	defer s.Close()

	ctx := dht.Context()
	cr := ctxio.NewReader(ctx, s) // ok to use. we defer close stream in this func
	cw := ctxio.NewWriter(ctx, s) // ok to use. we defer close stream in this func
	r := ggio.NewDelimitedReader(cr, inet.MessageSizeMax)
	w := ggio.NewDelimitedWriter(cw)
	mPeer := s.Conn().RemotePeer()

	// receive msg
	pmes := new(pb.Message)
	if err := r.ReadMsg(pmes); err != nil {
		log.Debugf("Error unmarshaling data: %s", err)
		return
	}

	// update the peer (on valid msgs only)
	dht.updateFromMessage(ctx, mPeer, pmes)

	// get handler for this msg type.
	handler := dht.handlerForMsgType(pmes.GetType())
	if handler == nil {
		log.Debug("got back nil handler from handlerForMsgType")
		return
	}

	// dispatch handler.
	rpmes, err := handler(ctx, mPeer, pmes)
	if err != nil {
		log.Debugf("handle message error: %s", err)
		return
	}

	// if nil response, return it before serializing
	if rpmes == nil {
		log.Debug("Got back nil response from request.")
		return
	}

	// send out response msg
	if err := w.WriteMsg(rpmes); err != nil {
		log.Debugf("send response error: %s", err)
		return
	}

	return
}
開發者ID:peckjerry,項目名稱:go-ipfs,代碼行數:48,代碼來源:dht_net.go

示例3: HandleStream

func (lb *Loopback) HandleStream(s inet.Stream) {
	defer s.Close()
	pbr := ggio.NewDelimitedReader(s, inet.MessageSizeMax)
	var incoming dhtpb.Message
	if err := pbr.ReadMsg(&incoming); err != nil {
		log.Debug(err)
		return
	}
	ctx := context.TODO()
	outgoing := lb.Handler.HandleRequest(ctx, s.Conn().RemotePeer(), &incoming)

	pbw := ggio.NewDelimitedWriter(s)

	if err := pbw.WriteMsg(outgoing); err != nil {
		return // TODO logerr
	}
}
開發者ID:musha68k,項目名稱:go-ipfs,代碼行數:17,代碼來源:loopback.go

示例4: handleNewStream

// handleNewStream receives a new stream from the network.
func (bsnet *impl) handleNewStream(s inet.Stream) {
	defer s.Close()

	if bsnet.receiver == nil {
		return
	}

	received, err := bsmsg.FromNet(s)
	if err != nil {
		go bsnet.receiver.ReceiveError(err)
		log.Debugf("bitswap net handleNewStream from %s error: %s", s.Conn().RemotePeer(), err)
		return
	}

	p := s.Conn().RemotePeer()
	ctx := context.Background()
	log.Debugf("bitswap net handleNewStream from %s", s.Conn().RemotePeer())
	bsnet.receiver.ReceiveMessage(ctx, p, received)
}
開發者ID:musha68k,項目名稱:go-ipfs,代碼行數:20,代碼來源:ipfs_impl.go

示例5: HandleStream

func (p *standard) HandleStream(s inet.Stream) {
	// TODO(brian): Should clients be able to satisfy requests?
	log.Error("supernode client received (dropped) a routing message from", s.Conn().RemotePeer())
	s.Close()
}
開發者ID:musha68k,項目名稱:go-ipfs,代碼行數:5,代碼來源:standard.go

示例6: handleNewStream

func (d *Diagnostics) handleNewStream(s inet.Stream) {
	d.HandleMessage(context.Background(), s)
	s.Close()
}
開發者ID:musha68k,項目名稱:go-ipfs,代碼行數:4,代碼來源:diag.go


注:本文中的gx/ipfs/QmUBogf4nUefBjmYjn6jfsfPJRkmDGSeMhNj4usRKq69f4/go-libp2p/p2p/net.Stream類示例由純淨天空整理自Github/MSDocs等開源代碼及文檔管理平台,相關代碼片段篩選自各路編程大神貢獻的開源項目,源碼版權歸原作者所有,傳播和使用請參考對應項目的License;未經允許,請勿轉載。