本文整理匯總了Golang中github.com/r3boot/rlib/sys.Run函數的典型用法代碼示例。如果您正苦於以下問題：Golang Run函數的具體用法？Golang Run怎麽用？Golang Run使用的例子？那麽, 這裏精選的函數代碼示例或許可以為您提供幫助。
在下文中一共展示了Run函數的15個代碼示例，這些例子默認根據受歡迎程度排序。您可以為喜歡或者感覺有用的代碼點讚，您的評價將有助於係統推薦出更棒的Golang代碼示例。
示例1: GetType
func (link *Link) GetType() (intf_type byte, err error) {
l := *link
if !l.HasLink() {
if err = l.SetLinkStatus(LINK_UP); err != nil {
err = errors.New("SetLinkStatus failed: " + err.Error())
return
}
}
stdout, _, err := sys.Run(l.CmdIfconfig, l.Interface.Name)
if err != nil {
return
}
for _, line := range stdout {
if strings.Contains(line, IFCONFIG_MEDIA_ETHERNET) {
intf_type = INTF_TYPE_ETHERNET
return
} else if strings.Contains(line, IFCONFIG_MEDIA_WIRELESS) {
intf_type = INTF_TYPE_WIRELESS
return
}
}
err = errors.New("Unknown interface type")
return
}示例2: Stop
/*
* Stop dhcpcd on intf. Print an error if anything goes wrong
*/
func (d Dhcpcd) Stop() (err error) {
_, _, err = sys.Run(d.CmdDhcpcd, "-k", d.Interface)
if err != nil {
err = errors.New("Failed to stop dhcpcd: " + err.Error())
}
return
}示例3: AddAddress
func (i Ip) AddAddress(ip string, af byte) (err error) {
use_af, err := mkUseAf(af)
if err != nil {
return
}
sys.Run("/sbin/ip", use_af, "addr", "add", ip, "dev", i.Interface)
return
}示例4: GetMTU
func (l Link) GetMTU() (mtu int, err error) {
stdout, _, err := sys.Run(l.CmdIfconfig, l.Interface.Name)
if err != nil {
return
}
raw_mtu := strings.Fields(stdout[0])[5]
mtu, err = strconv.Atoi(raw_mtu)
return
}示例5: AddAddress
func (i Ip) AddAddress(ip string, af byte) (err error) {
use_af, err := mkUseAf(af)
if err != nil {
return
}
sys.Run("/sbin/ifconfig", i.Interface, use_af, "alias", ip)
return
}示例6: RemoveRoute
func (r RIB) RemoveRoute(network net.IPNet) (err error) {
_, use_af, err := getAfDetails(network)
if err != nil {
return
}
use_af = "-" + use_af
_, _, err = sys.Run("/sbin/route", "delete", use_af, network.String())
return
}示例7: AddRoute
func (r RIB) AddRoute(network net.IPNet, gateway net.IP) (err error) {
_, use_af, err := getAfDetails(network)
if err != nil {
return
}
use_af = "-" + use_af
_, _, err = sys.Run("/sbin/route", "add", use_af, network.String(), gateway.String())
return
}示例8: DisableRA
func (r RA) DisableRA() (err error) {
enabled, err := r.AcceptsRA()
if err != nil {
return
}
if enabled {
_, _, err = sys.Run(r.CmdIfconfig, r.Interface, IFCONFIG_USE_AF_INET6, "-"+IFCONFIG_ENABLE_RTADV)
}
return
}示例9: FlushAddresses
func (i Ip) FlushAddresses(af byte) (err error) {
use_af, err := mkUseAf(af)
if err != nil {
return
}
if len(use_af) == 0 {
return
}
sys.Run("/sbin/ip", use_af, "addr", "flush", "dev", i.Interface, "scope", "global")
return
}示例10: SetLinkStatus
func (l Link) SetLinkStatus(link_status byte) (err error) {
var status string
if link_status == LINK_UP {
status = "up"
} else if link_status == LINK_DOWN {
status = "down"
} else {
err = errors.New("Unknown link status: " + strconv.Itoa(int(link_status)))
return
}
_, _, err = sys.Run(l.CmdIfconfig, l.Interface.Name, status)
return
}示例11: AcceptsRA
func (r RA) AcceptsRA() (result bool, err error) {
stdout, _, err := sys.Run(r.CmdIfconfig, r.Interface, IFCONFIG_USE_AF_INET6)
if err != nil {
return
}
for _, line := range stdout {
if strings.Contains(line, IFCONFIG_ND6_OPTIONS) {
result = strings.Contains(line, IFCONFIG_ACCEPT_RTADV)
return
}
}
return
}示例12: RemoveConfig
func (rc *ResolvConf) RemoveConfig() {
r := *rc
_, _, err := sys.Run(r.CmdResolvconf, "-d", r.Interface)
if err != nil {
err = errors.New("Failed to remove config for " + r.Interface + ": " + err.Error())
}
if err = r.UpdateResolvConf(); err != nil {
err = errors.New("Failed to update /etc/resolv.conf: " + err.Error())
return
}
*rc = r
}示例13: Start
func (ovpn *OpenVPN) Start() (err error) {
o := *ovpn
_, _, err = sys.Run(o.CmdOpenvpn, "--daemon", "--config", o.ConfigFile, "--writepid", o.PidFile)
if err != nil {
err = errors.New("Failed to start OpenVPN: " + err.Error())
return
}
var timeout_counter = 0
for {
if timeout_counter >= OVPN_STARTUP_MAXWAIT {
err = errors.New("Connection establishment took too long")
o.Stop()
break
}
is_connected, e := o.IsConnected()
if e != nil {
err = e
return
}
if is_connected {
break
}
time.Sleep(1 * time.Second)
timeout_counter += 1
}
raw_intf, err := net.InterfaceByName(o.InterfaceName)
intf, err := network.InterfaceFactory(*raw_intf)
if err != nil {
return
}
o.Interface = intf
*ovpn = o
return
}示例14: IsRunning
func (s Service) IsRunning(name string) (result bool, err error) {
stdout, stderr, err := sys.Run(CmdService, name, "status")
log.Print(CmdService)
log.Print(stdout)
log.Print(stderr)
if err != nil {
return
}
if strings.Contains(stdout[0], SERVICE_SERVICE_RUNNING) {
result = true
} else if strings.Contains(stdout[0], SERVICE_SERVICE_NOT_RUNNING) {
result = false
} else if strings.Contains(stdout[0], SERVICE_SERVICE_NOT_ENABLED) {
err = errors.New("Service " + name + " is not enabled")
} else {
err = errors.New("Unknown error trying to determine service status of " + name)
}
return
}示例15: GetRoute
func (r RIB) GetRoute(network net.IPNet) (result Route, err error) {
af, use_af, err := getAfDetails(network)
if err != nil {
return
}
stdout, _, err := sys.Run("/usr/bin/netstat", "-rn", "-f", use_af)
if err != nil {
return
}
for _, line := range stdout {
if strings.HasPrefix(line, "Routing") {
continue
} else if line == "" {
continue
} else if strings.HasPrefix(line, "Internet") {
continue
} else if strings.HasPrefix(line, "Destination") {
continue
}
route, e := parseRoutingLine(af, line)
if e != nil {
continue
}
if (network.IP.Equal(route.Destination.IP)) &&
(network.Mask.String() == route.Destination.Mask.String()) {
result = route
return
}
}
err = errors.New("Failed to find any routes")
return
}