Golang factory.NewPlugin函數代碼示例

func RunSDNController(config *kubernetes.NodeConfig, nodeConfig configapi.NodeConfig) kubernetes.FilteringEndpointsConfigHandler {
	oclient, _, err := configapi.GetOpenShiftClient(nodeConfig.MasterKubeConfig)
	if err != nil {
		glog.Fatal("Failed to get kube client for SDN")
	}

	ch := make(chan struct{})

	controller, endpointFilter, err := factory.NewPlugin(nodeConfig.NetworkConfig.NetworkPluginName, oclient, config.Client, nodeConfig.NodeName, nodeConfig.NodeIP, ch)
	if err != nil {
		glog.Fatalf("SDN initialization failed: %v", err)
	}

	if controller != nil {
		config.KubeletConfig.StartUpdates = ch
		config.KubeletConfig.NetworkPlugins = append(config.KubeletConfig.NetworkPlugins, controller)

		go func() {
			err := controller.StartNode(nodeConfig.NetworkConfig.MTU)
			if err != nil {
				glog.Fatalf("SDN Node failed: %v", err)
			}
		}()
	}

	return endpointFilter
}

// RunSDNController runs openshift-sdn if the said network plugin is provided
func (c *MasterConfig) RunSDNController() {
	oClient, kClient := c.SDNControllerClients()
	controller, _, err := factory.NewPlugin(c.Options.NetworkConfig.NetworkPluginName, oClient, kClient, "", "")
	if err != nil {
		glog.Fatalf("SDN initialization failed: %v", err)
	}

	if controller != nil {
		err = controller.StartMaster(c.Options.NetworkConfig.ClusterNetworkCIDR, c.Options.NetworkConfig.HostSubnetLength, c.Options.NetworkConfig.ServiceNetworkCIDR)
		if err != nil {
			glog.Fatalf("SDN initialization failed: %v", err)
		}
	}
}

//.........這裏部分代碼省略.........

	// Setup auth
	osClient, osClientConfig, err := configapi.GetOpenShiftClient(options.MasterKubeConfig)
	if err != nil {
		return nil, err
	}
	authnTTL, err := time.ParseDuration(options.AuthConfig.AuthenticationCacheTTL)
	if err != nil {
		return nil, err
	}
	authn, err := newAuthenticator(clientCAs, clientcmd.AnonymousClientConfig(osClientConfig), authnTTL, options.AuthConfig.AuthenticationCacheSize)
	if err != nil {
		return nil, err
	}

	authzAttr, err := newAuthorizerAttributesGetter(options.NodeName)
	if err != nil {
		return nil, err
	}

	authzTTL, err := time.ParseDuration(options.AuthConfig.AuthorizationCacheTTL)
	if err != nil {
		return nil, err
	}
	authz, err := newAuthorizer(osClient, authzTTL, options.AuthConfig.AuthorizationCacheSize)
	if err != nil {
		return nil, err
	}

	cfg.Auth = kubeletserver.NewKubeletAuth(authn, authzAttr, authz)

	// Make sure the node doesn't think it is in standalone mode
	// This is required for the node to enforce nodeSelectors on pods, to set hostIP on pod status updates, etc
	cfg.StandaloneMode = false

	// TODO: could be cleaner
	if configapi.UseTLS(options.ServingInfo) {
		extraCerts, err := configapi.GetNamedCertificateMap(options.ServingInfo.NamedCertificates)
		if err != nil {
			return nil, err
		}
		cfg.TLSOptions = &kubeletserver.TLSOptions{
			Config: crypto.SecureTLSConfig(&tls.Config{
				// RequestClientCert lets us request certs, but allow requests without client certs
				// Verification is done by the authn layer
				ClientAuth: tls.RequestClientCert,
				ClientCAs:  clientCAs,
				// Set SNI certificate func
				// Do not use NameToCertificate, since that requires certificates be included in the server's tlsConfig.Certificates list,
				// which we do not control when running with http.Server#ListenAndServeTLS
				GetCertificate: cmdutil.GetCertificateFunc(extraCerts),
			}),
			CertFile: options.ServingInfo.ServerCert.CertFile,
			KeyFile:  options.ServingInfo.ServerCert.KeyFile,
		}
	} else {
		cfg.TLSOptions = nil
	}

	// Prepare cloud provider
	cloud, err := cloudprovider.InitCloudProvider(server.CloudProvider, server.CloudConfigFile)
	if err != nil {
		return nil, err
	}
	if cloud != nil {
		glog.V(2).Infof("Successfully initialized cloud provider: %q from the config file: %q\n", server.CloudProvider, server.CloudConfigFile)
	}
	cfg.Cloud = cloud

	sdnPlugin, endpointFilter, err := factory.NewPlugin(options.NetworkConfig.NetworkPluginName, originClient, kubeClient, options.NodeName, options.NodeIP)
	if err != nil {
		return nil, fmt.Errorf("SDN initialization failed: %v", err)
	}
	if sdnPlugin != nil {
		cfg.NetworkPlugins = append(cfg.NetworkPlugins, sdnPlugin)
	}

	config := &NodeConfig{
		BindAddress: options.ServingInfo.BindAddress,

		AllowDisabledDocker: options.AllowDisabledDocker,
		Containerized:       containerized,

		Client: kubeClient,

		VolumeDir: options.VolumeDirectory,

		KubeletServer: server,
		KubeletConfig: cfg,

		ProxyConfig: proxyconfig,

		MTU: options.NetworkConfig.MTU,

		SDNPlugin:                 sdnPlugin,
		FilteringEndpointsHandler: endpointFilter,
	}

	return config, nil
}

//.........這裏部分代碼省略.........
		glog.Warningf("Disabling cgroup manipulation of nested docker daemon for docker-in-docker compatibility")
		cfg.DockerDaemonContainer = ""
	}

	// Setup auth
	osClient, osClientConfig, err := configapi.GetOpenShiftClient(options.MasterKubeConfig)
	if err != nil {
		return nil, err
	}
	authnTTL, err := time.ParseDuration(options.AuthConfig.AuthenticationCacheTTL)
	if err != nil {
		return nil, err
	}
	authn, err := newAuthenticator(clientCAs, clientcmd.AnonymousClientConfig(*osClientConfig), authnTTL, options.AuthConfig.AuthenticationCacheSize)
	if err != nil {
		return nil, err
	}

	authzAttr, err := newAuthorizerAttributesGetter(options.NodeName)
	if err != nil {
		return nil, err
	}

	authzTTL, err := time.ParseDuration(options.AuthConfig.AuthorizationCacheTTL)
	if err != nil {
		return nil, err
	}
	authz, err := newAuthorizer(osClient, authzTTL, options.AuthConfig.AuthorizationCacheSize)
	if err != nil {
		return nil, err
	}

	cfg.Auth = kubelet.NewKubeletAuth(authn, authzAttr, authz)

	// Make sure the node doesn't think it is in standalone mode
	// This is required for the node to enforce nodeSelectors on pods, to set hostIP on pod status updates, etc
	cfg.StandaloneMode = false

	// TODO: could be cleaner
	if configapi.UseTLS(options.ServingInfo) {
		extraCerts, err := configapi.GetNamedCertificateMap(options.ServingInfo.NamedCertificates)
		if err != nil {
			return nil, err
		}
		cfg.TLSOptions = &kubelet.TLSOptions{
			Config: crypto.SecureTLSConfig(&tls.Config{
				// RequestClientCert lets us request certs, but allow requests without client certs
				// Verification is done by the authn layer
				ClientAuth: tls.RequestClientCert,
				ClientCAs:  clientCAs,
				// Set SNI certificate func
				// Do not use NameToCertificate, since that requires certificates be included in the server's tlsConfig.Certificates list,
				// which we do not control when running with http.Server#ListenAndServeTLS
				GetCertificate: cmdutil.GetCertificateFunc(extraCerts),
			}),
			CertFile: options.ServingInfo.ServerCert.CertFile,
			KeyFile:  options.ServingInfo.ServerCert.KeyFile,
		}
	} else {
		cfg.TLSOptions = nil
	}

	// Prepare cloud provider
	cloud, err := cloudprovider.InitCloudProvider(server.CloudProvider, server.CloudConfigFile)
	if err != nil {
		return nil, err
	}
	if cloud != nil {
		glog.V(2).Infof("Successfully initialized cloud provider: %q from the config file: %q\n", server.CloudProvider, server.CloudConfigFile)
	}
	cfg.Cloud = cloud

	sdnPlugin, endpointFilter, err := factory.NewPlugin(options.NetworkConfig.NetworkPluginName, originClient, kubeClient, options.NodeName, options.NodeIP)
	if err != nil {
		return nil, fmt.Errorf("SDN initialization failed: %v", err)
	} else if sdnPlugin != nil {
		cfg.NetworkPlugins = append(cfg.NetworkPlugins, sdnPlugin)
	}

	config := &NodeConfig{
		BindAddress: options.ServingInfo.BindAddress,

		AllowDisabledDocker: options.AllowDisabledDocker,

		Client: kubeClient,

		VolumeDir: options.VolumeDirectory,

		KubeletServer: server,
		KubeletConfig: cfg,

		IPTablesSyncPeriod: options.IPTablesSyncPeriod,
		MTU:                options.NetworkConfig.MTU,

		SDNPlugin:                 sdnPlugin,
		FilteringEndpointsHandler: endpointFilter,
	}

	return config, nil
}