Golang packer.Communicator類代碼示例

本文整理匯總了Golang中github.com/mitchellh/packer/packer.Communicator類的典型用法代碼示例。如果您正苦於以下問題：Golang Communicator類的具體用法？Golang Communicator怎麽用？Golang Communicator使用的例子？那麽, 這裏精選的類代碼示例或許可以為您提供幫助。

在下文中一共展示了Communicator類的15個代碼示例，這些例子默認根據受歡迎程度排序。您可以為喜歡或者感覺有用的代碼點讚，您的評價將有助於係統推薦出更棒的Golang代碼示例。

示例1: createConfig

func (p *Provisioner) createConfig(ui packer.Ui, comm packer.Communicator, localCookbooks []string) (string, error) {
	ui.Message("Creating configuration file 'solo.rb'")

	cookbook_paths := make([]string, len(p.config.RemoteCookbookPaths)+len(localCookbooks))
	for i, path := range p.config.RemoteCookbookPaths {
		cookbook_paths[i] = fmt.Sprintf(`"%s"`, path)
	}

	for i, path := range localCookbooks {
		i = len(p.config.RemoteCookbookPaths) + i
		cookbook_paths[i] = fmt.Sprintf(`"%s"`, path)
	}

	configString, err := p.config.tpl.Process(DefaultConfigTemplate, &ConfigTemplate{
		CookbookPaths: strings.Join(cookbook_paths, ","),
	})
	if err != nil {
		return "", err
	}

	remotePath := filepath.Join(p.config.StagingDir, "solo.rb")
	if err := comm.Upload(remotePath, bytes.NewReader([]byte(configString))); err != nil {
		return "", err
	}

	return remotePath, nil
}

開發者ID:B-Rich，項目名稱:packer，代碼行數:27，代碼來源:provisioner.go

示例2: createKnifeConfig

func (p *Provisioner) createKnifeConfig(ui packer.Ui, comm packer.Communicator, nodeName string, serverUrl string, clientKey string, sslVerifyMode string) (string, error) {
	ui.Message("Creating configuration file 'knife.rb'")

	// Read the template
	tpl := DefaultKnifeTemplate

	ctx := p.config.ctx
	ctx.Data = &ConfigTemplate{
		NodeName:      nodeName,
		ServerUrl:     serverUrl,
		ClientKey:     clientKey,
		SslVerifyMode: sslVerifyMode,
	}
	configString, err := interpolate.Render(tpl, &ctx)
	if err != nil {
		return "", err
	}

	remotePath := filepath.ToSlash(filepath.Join(p.config.StagingDir, "knife.rb"))
	if err := comm.Upload(remotePath, bytes.NewReader([]byte(configString)), nil); err != nil {
		return "", err
	}

	return remotePath, nil
}

開發者ID:monkeylittleinc，項目名稱:packer，代碼行數:25，代碼來源:provisioner.go

示例3: uploadDeploymentManifest

func (p *Provisioner) uploadDeploymentManifest(ui packer.Ui, comm packer.Communicator) error {
	ui.Say(fmt.Sprintf("Uploading manifest: %s", p.config.Manifest))

	err := runCmd("mkdir ~/deployments", ui, comm)
	if err != nil {
		return err
	}

	f, err := os.Open(p.config.Manifest)
	if err != nil {
		return err
	}
	defer f.Close()

	fi, err := f.Stat()
	if err != nil {
		return err
	}

	err = comm.Upload(fmt.Sprintf("~/deployments/%s", p.config.Manifest), f, &fi)
	if err != nil {
		return err
	}

	cmd := fmt.Sprintf("sed -i \"s/director_uuid: .*/director_uuid: $(bosh status --uuid)/\" ~/deployments/%s", p.config.Manifest)
	return runCmd(cmd, ui, comm)
}

開發者ID:bodymindarts，項目名稱:packer-bosh-lite，代碼行數:27，代碼來源:provisioner.go

示例4: ProvisionUpload

func (p *Provisioner) ProvisionUpload(ui packer.Ui, comm packer.Communicator) error {
	ui.Say(fmt.Sprintf("Uploading %s => %s", p.config.Source, p.config.Destination))
	info, err := os.Stat(p.config.Source)
	if err != nil {
		return err
	}

	// If we're uploading a directory, short circuit and do that
	if info.IsDir() {
		return comm.UploadDir(p.config.Destination, p.config.Source, nil)
	}

	// We're uploading a file...
	f, err := os.Open(p.config.Source)
	if err != nil {
		return err
	}
	defer f.Close()

	fi, err := f.Stat()
	if err != nil {
		return err
	}

	err = comm.Upload(p.config.Destination, f, &fi)
	if err != nil {
		ui.Error(fmt.Sprintf("Upload failed: %s", err))
	}
	return err
}

開發者ID:c12simple，項目名稱:packer，代碼行數:30，代碼來源:provisioner.go

示例5: uploadManifests

func (p *Provisioner) uploadManifests(ui packer.Ui, comm packer.Communicator) (string, error) {
	// Create the remote manifests directory...
	ui.Message("Uploading manifests...")
	remoteManifestsPath := fmt.Sprintf("%s/manifests", p.config.StagingDir)
	if err := p.createDir(ui, comm, remoteManifestsPath); err != nil {
		return "", fmt.Errorf("Error creating manifests directory: %s", err)
	}

	// Upload the main manifest
	f, err := os.Open(p.config.ManifestFile)
	if err != nil {
		return "", err
	}
	defer f.Close()

	manifestFilename := p.config.ManifestFile
	if fi, err := os.Stat(p.config.ManifestFile); err != nil {
		return "", fmt.Errorf("Error inspecting manifest file: %s", err)
	} else if !fi.IsDir() {
		manifestFilename = filepath.Base(manifestFilename)
	} else {
		ui.Say("WARNING: manifest_file should be a file. Use manifest_dir for directories")
	}

	remoteManifestFile := fmt.Sprintf("%s/%s", remoteManifestsPath, manifestFilename)
	if err := comm.Upload(remoteManifestFile, f, nil); err != nil {
		return "", err
	}

	return remoteManifestFile, nil
}

開發者ID:ttysteale，項目名稱:packer，代碼行數:31，代碼來源:provisioner.go

示例6: ProvisionDownload

func (p *Provisioner) ProvisionDownload(ui packer.Ui, comm packer.Communicator) error {
	for _, src := range p.config.Sources {
		ui.Say(fmt.Sprintf("Downloading %s => %s", src, p.config.Destination))
		// ensure destination dir exists.  p.config.Destination may either be a file or a dir.
		dir := p.config.Destination
		// if it doesn't end with a /, set dir as the parent dir
		if !strings.HasSuffix(p.config.Destination, "/") {
			dir = filepath.Dir(dir)
		}
		if dir != "" {
			err := os.MkdirAll(dir, os.FileMode(0755))
			if err != nil {
				return err
			}
		}
		// if the config.Destination was a dir, download the dir
		if strings.HasSuffix(p.config.Destination, "/") {
			return comm.DownloadDir(src, p.config.Destination, nil)
		}

		f, err := os.OpenFile(p.config.Destination, os.O_CREATE|os.O_WRONLY|os.O_TRUNC, 0644)
		if err != nil {
			return err
		}
		defer f.Close()

		err = comm.Download(src, f)
		if err != nil {
			ui.Error(fmt.Sprintf("Download failed: %s", err))
			return err
		}
	}
	return nil
}

開發者ID:rnaveiras，項目名稱:packer，代碼行數:34，代碼來源:provisioner.go

示例7: UploadLocalDirectory

func UploadLocalDirectory(localDir string, comm packer.Communicator) (err error) {
	visitPath := func(path string, f os.FileInfo, err error) (err2 error) {
		var remotePath = RemoteStagingPath + "/" + path
		if f.IsDir() {
			// Make remote directory
			err = CreateRemoteDirectory(remotePath, comm)
			if err != nil {
				return err
			}
		} else {
			// Upload file to existing directory
			file, err := os.Open(path)
			if err != nil {
				return fmt.Errorf("Error opening file: %s", err)
			}

			err = comm.Upload(remotePath, file)
			if err != nil {
				return fmt.Errorf("Error uploading file: %s", err)
			}
		}
		return
	}

	log.Printf("Uploading directory %s", localDir)
	err = filepath.Walk(localDir, visitPath)
	if err != nil {
		return fmt.Errorf("Error uploading modules %s: %s", localDir, err)
	}

	return nil
}

開發者ID:jamtur01，項目名稱:packer，代碼行數:32，代碼來源:provisioner.go

示例8: ProvisionDownload

func (p *Provisioner) ProvisionDownload(ui packer.Ui, comm packer.Communicator) error {
	for _, src := range p.config.Sources {
		ui.Say(fmt.Sprintf("Downloading %s => %s", src, p.config.Destination))

		if strings.HasSuffix(p.config.Destination, "/") {
			err := os.MkdirAll(p.config.Destination, os.FileMode(0755))
			if err != nil {
				return err
			}
			return comm.DownloadDir(src, p.config.Destination, nil)
		}

		f, err := os.OpenFile(p.config.Destination, os.O_CREATE|os.O_WRONLY|os.O_TRUNC, 0644)
		if err != nil {
			return err
		}
		defer f.Close()

		err = comm.Download(src, f)
		if err != nil {
			ui.Error(fmt.Sprintf("Download failed: %s", err))
			return err
		}
	}
	return nil
}

開發者ID:metalmolly，項目名稱:packer，代碼行數:26，代碼來源:provisioner.go

示例9: createJson

func (p *Provisioner) createJson(ui packer.Ui, comm packer.Communicator) (string, error) {
	ui.Message("Creating JSON attribute file")

	jsonData := make(map[string]interface{})

	// Copy the configured JSON
	for k, v := range p.config.Json {
		jsonData[k] = v
	}

	// Set the run list if it was specified
	if len(p.config.RunList) > 0 {
		jsonData["run_list"] = p.config.RunList
	}

	jsonBytes, err := json.MarshalIndent(jsonData, "", "  ")
	if err != nil {
		return "", err
	}

	// Upload the bytes
	remotePath := filepath.ToSlash(filepath.Join(p.config.StagingDir, "node.json"))
	if err := comm.Upload(remotePath, bytes.NewReader(jsonBytes), nil); err != nil {
		return "", err
	}

	return remotePath, nil
}

開發者ID:cewood，項目名稱:packer，代碼行數:28，代碼來源:provisioner.go

示例10: executeCommand

func executeCommand(command string, comm packer.Communicator) (err error) {
	// Setup the remote command
	stdout_r, stdout_w := io.Pipe()
	stderr_r, stderr_w := io.Pipe()

	var cmd packer.RemoteCmd
	cmd.Command = command
	cmd.Stdout = stdout_w
	cmd.Stderr = stderr_w

	log.Printf("Executing command: %s", cmd.Command)
	err = comm.Start(&cmd)
	if err != nil {
		return fmt.Errorf("Failed executing command: %s", err)
	}

	exitChan := make(chan int, 1)
	stdoutChan := iochan.DelimReader(stdout_r, '\n')
	stderrChan := iochan.DelimReader(stderr_r, '\n')

	go func() {
		defer stdout_w.Close()
		defer stderr_w.Close()

		cmd.Wait()
		exitChan <- cmd.ExitStatus
	}()

OutputLoop:
	for {
		select {
		case output := <-stderrChan:
			Ui.Message(strings.TrimSpace(output))
		case output := <-stdoutChan:
			Ui.Message(strings.TrimSpace(output))
		case exitStatus := <-exitChan:
			log.Printf("Puppet provisioner exited with status %d", exitStatus)

			if exitStatus != 0 {
				return fmt.Errorf("Command exited with non-zero exit status: %d", exitStatus)
			}

			break OutputLoop
		}
	}

	// Make sure we finish off stdout/stderr because we may have gotten
	// a message from the exit channel first.
	for output := range stdoutChan {
		Ui.Message(output)
	}

	for output := range stderrChan {
		Ui.Message(output)
	}

	return nil
}

開發者ID:jamtur01，項目名稱:packer，代碼行數:58，代碼來源:provisioner.go

示例11: uploadFile

func (p *Provisioner) uploadFile(ui packer.Ui, comm packer.Communicator, dst string, src string) error {
	f, err := os.Open(src)
	if err != nil {
		return err
	}
	defer f.Close()

	return comm.Upload(dst, f, nil)
}

開發者ID:cewood，項目名稱:packer，代碼行數:9，代碼來源:provisioner.go

示例12: uploadSingle

func (s *StepUploadX509Cert) uploadSingle(comm packer.Communicator, dst, src string) error {
	f, err := os.Open(src)
	if err != nil {
		return err
	}
	defer f.Close()

	return comm.Upload(dst, f, nil)
}

開發者ID:c12simple，項目名稱:packer，代碼行數:9，代碼來源:step_upload_x509_cert.go

示例13: Provision

func (p *Provisioner) Provision(ui packer.Ui, comm packer.Communicator) error {
	ui.Say(fmt.Sprintf("Uploading %s => %s", p.config.Source, p.config.Destination))
	f, err := os.Open(p.config.Source)
	if err != nil {
		return err
	}
	defer f.Close()

	return comm.Upload(p.config.Destination, f)
}

開發者ID:johnvilsack，項目名稱:golang-stuff，代碼行數:10，代碼來源:provisioner.go

示例14: ProvisionUpload

func (p *Provisioner) ProvisionUpload(ui packer.Ui, comm packer.Communicator) error {
	ui.Say(fmt.Sprintf("Uploading %s => %s", p.config.Source, p.config.Destination))

	info, _ := os.Stat(p.config.Source)
	if info != nil {
		// If we're uploading a directory, short circuit and do that
		if info.IsDir() {
			return comm.UploadDir(p.config.Destination, p.config.Source, nil)
		}
	}

	pwd, err := os.Getwd()
	if err != nil {
		return fmt.Errorf("Couldn't get the current working directory")
	}

	det, err := gg.Detect(p.config.Source, pwd, gg.Detectors)
	if err != nil {
		return fmt.Errorf("Couldn't detect file source type: %v", err)
	}

	if len(det) == 0 {
		return errors.New("Don't recognise the source type")
	}

	dir, err := ioutil.TempDir("", "packer")
	if err != nil {
		return errors.New("Unable to create temp dir")
	}

	defer os.RemoveAll(dir)

	source := filepath.Join(dir, filepath.Base(p.config.Source))
	if err := gg.GetFile(source, p.config.Source); err != nil {
		return fmt.Errorf("There was a problem getting the file: %v", err)
	}

	// We're uploading a file...
	f, err := os.Open(source)
	if err != nil {
		return err
	}
	defer f.Close()

	fi, err := f.Stat()
	if err != nil {
		return err
	}

	err = comm.Upload(p.config.Destination, f, &fi)
	if err != nil {
		ui.Error(fmt.Sprintf("Upload failed: %s", err))
	}
	return err
}

開發者ID:sthulb，項目名稱:packer-provisioner-remote-file，代碼行數:55，代碼來源:provisioner.go

示例15: createConfig

func (p *Provisioner) createConfig(
	ui packer.Ui,
	comm packer.Communicator,
	nodeName string,
	serverUrl string,
	clientKey string,
	encryptedDataBagSecretPath,
	remoteKeyPath string,
	validationClientName string,
	chefEnvironment string,
	sslVerifyMode string) (string, error) {

	ui.Message("Creating configuration file 'client.rb'")

	// Read the template
	tpl := DefaultConfigTemplate
	if p.config.ConfigTemplate != "" {
		f, err := os.Open(p.config.ConfigTemplate)
		if err != nil {
			return "", err
		}
		defer f.Close()

		tplBytes, err := ioutil.ReadAll(f)
		if err != nil {
			return "", err
		}

		tpl = string(tplBytes)
	}

	ctx := p.config.ctx
	ctx.Data = &ConfigTemplate{
		NodeName:                   nodeName,
		ServerUrl:                  serverUrl,
		ClientKey:                  clientKey,
		ValidationKeyPath:          remoteKeyPath,
		ValidationClientName:       validationClientName,
		ChefEnvironment:            chefEnvironment,
		SslVerifyMode:              sslVerifyMode,
		EncryptedDataBagSecretPath: encryptedDataBagSecretPath,
	}
	configString, err := interpolate.Render(tpl, &ctx)
	if err != nil {
		return "", err
	}

	remotePath := filepath.ToSlash(filepath.Join(p.config.StagingDir, "client.rb"))
	if err := comm.Upload(remotePath, bytes.NewReader([]byte(configString)), nil); err != nil {
		return "", err
	}

	return remotePath, nil
}

開發者ID:monkeylittleinc，項目名稱:packer，代碼行數:54，代碼來源:provisioner.go

注：本文中的github.com/mitchellh/packer/packer.Communicator類示例由純淨天空整理自Github/MSDocs等開源代碼及文檔管理平台，相關代碼片段篩選自各路編程大神貢獻的開源項目，源碼版權歸原作者所有，傳播和使用請參考對應項目的License；未經允許，請勿轉載。