Golang common.ScrubConfig函數代碼示例

本文整理匯總了Golang中github.com/mitchellh/packer/common.ScrubConfig函數的典型用法代碼示例。如果您正苦於以下問題：Golang ScrubConfig函數的具體用法？Golang ScrubConfig怎麽用？Golang ScrubConfig使用的例子？那麽, 這裏精選的函數代碼示例或許可以為您提供幫助。

在下文中一共展示了ScrubConfig函數的15個代碼示例，這些例子默認根據受歡迎程度排序。您可以為喜歡或者感覺有用的代碼點讚，您的評價將有助於係統推薦出更棒的Golang代碼示例。

示例1: Prepare

func (b *Builder) Prepare(raws ...interface{}) ([]string, error) {
	md, err := common.DecodeConfig(&b.config, raws...)
	if err != nil {
		return nil, err
	}

	b.config.tpl, err = packer.NewConfigTemplate()
	if err != nil {
		return nil, err
	}
	b.config.tpl.UserVars = b.config.PackerUserVars

	// Accumulate any errors
	errs := common.CheckUnusedConfig(md)
	errs = packer.MultiErrorAppend(errs, b.config.AccessConfig.Prepare(b.config.tpl)...)
	errs = packer.MultiErrorAppend(errs, b.config.ImageConfig.Prepare(b.config.tpl)...)
	errs = packer.MultiErrorAppend(errs, b.config.RunConfig.Prepare(b.config.tpl)...)

	if errs != nil && len(errs.Errors) > 0 {
		return nil, errs
	}

	log.Println(common.ScrubConfig(b.config, b.config.Password))
	return nil, nil
}

開發者ID:hnakamur，項目名稱:packer，代碼行數:25，代碼來源:builder.go

示例2: Prepare

func (b *Builder) Prepare(raws ...interface{}) error {
	md, err := common.DecodeConfig(&b.config, raws...)
	if err != nil {
		return err
	}

	b.config.tpl, err = packer.NewConfigTemplate()
	if err != nil {
		return err
	}
	b.config.tpl.UserVars = b.config.PackerUserVars
	b.config.tpl.Funcs(awscommon.TemplateFuncs)

	// Accumulate any errors
	errs := common.CheckUnusedConfig(md)
	errs = packer.MultiErrorAppend(errs, b.config.AccessConfig.Prepare(b.config.tpl)...)
	errs = packer.MultiErrorAppend(errs, b.config.AMIConfig.Prepare(b.config.tpl)...)
	errs = packer.MultiErrorAppend(errs, b.config.RunConfig.Prepare(b.config.tpl)...)

	if errs != nil && len(errs.Errors) > 0 {
		return errs
	}

	log.Println(common.ScrubConfig(b.config), b.config.AccessKey, b.config.SecretKey)
	return nil
}

開發者ID:reoring，項目名稱:packer，代碼行數:26，代碼來源:builder.go

示例3: Prepare

func (builder *Builder) Prepare(raws ...interface{}) ([]string, error) {
	md, err := common.DecodeConfig(&builder.config, raws...)
	if err != nil {
		return nil, err
	}

	builder.config.tpl, err = packer.NewConfigTemplate()
	if err != nil {
		return nil, err
	}
	builder.config.tpl.UserVars = builder.config.PackerUserVars
	builder.config.tpl.Funcs(awscommon.TemplateFuncs)

	if builder.config.VolumeSize == 0 {
		builder.config.VolumeSize = 12
	}

	if builder.config.VolumeType == "" {
		builder.config.VolumeType = "standard"
	}

	if builder.config.RootDeviceName == "" {
		builder.config.RootDeviceName = "/dev/xvda"
	}

	builder.ensureWorkerDeviceMapping()

	// Accumulate any errors
	errs := common.CheckUnusedConfig(md)
	errs = packer.MultiErrorAppend(errs, builder.config.AccessConfig.Prepare(builder.config.tpl)...)
	errs = packer.MultiErrorAppend(errs, builder.config.BlockDevices.Prepare(builder.config.tpl)...)
	errs = packer.MultiErrorAppend(errs, builder.config.AMIConfig.Prepare(builder.config.tpl)...)
	errs = packer.MultiErrorAppend(errs, builder.config.RunConfig.Prepare(builder.config.tpl)...)

	templates := map[string]*string{
		"worker_device_name": &builder.config.WorkerDeviceName,
		"root_device_name":   &builder.config.RootDeviceName,
	}

	for n, ptr := range templates {
		var err error
		*ptr, err = builder.config.tpl.Process(*ptr, nil)
		if err != nil {
			errs = packer.MultiErrorAppend(
				errs, fmt.Errorf("Error processing %s: %s", n, err))
		}
	}

	if errs != nil && len(errs.Errors) > 0 {
		return nil, errs
	}

	log.Println(common.ScrubConfig(builder.config, builder.config.AccessKey, builder.config.SecretKey))
	return nil, nil
}

開發者ID:bsamek，項目名稱:packer-builder-amazon-scratch，代碼行數:55，代碼來源:builder.go

示例4: Configure

// Entry point for configuration parisng when we've defined
func (p *PostProcessor) Configure(raws ...interface{}) error {
	p.config.ctx.Funcs = awscommon.TemplateFuncs
	err := config.Decode(&p.config, &config.DecodeOpts{
		Interpolate:        true,
		InterpolateContext: &p.config.ctx,
		InterpolateFilter: &interpolate.RenderFilter{
			Exclude: []string{
				"s3_key_name",
			},
		},
	}, raws...)
	if err != nil {
		return err
	}

	// Set defaults
	if p.config.S3Key == "" {
		p.config.S3Key = "packer-import-{{timestamp}}.ova"
	}

	errs := new(packer.MultiError)

	// Check and render s3_key_name
	if err = interpolate.Validate(p.config.S3Key, &p.config.ctx); err != nil {
		errs = packer.MultiErrorAppend(
			errs, fmt.Errorf("Error parsing s3_key_name template: %s", err))
	}

	// Check we have AWS access variables defined somewhere
	errs = packer.MultiErrorAppend(errs, p.config.AccessConfig.Prepare(&p.config.ctx)...)

	// define all our required paramaters
	templates := map[string]*string{
		"s3_bucket_name": &p.config.S3Bucket,
	}
	// Check out required params are defined
	for key, ptr := range templates {
		if *ptr == "" {
			errs = packer.MultiErrorAppend(
				errs, fmt.Errorf("%s must be set", key))
		}
	}

	// Anything which flagged return back up the stack
	if len(errs.Errors) > 0 {
		return errs
	}

	log.Println(common.ScrubConfig(p.config, p.config.AccessKey, p.config.SecretKey))
	return nil
}

開發者ID:boumenot，項目名稱:packer，代碼行數:52，代碼來源:post-processor.go

示例5: Prepare

func (b *Builder) Prepare(raws ...interface{}) ([]string, error) {
	err := config.Decode(&b.config, &config.DecodeOpts{
		Interpolate: true,
	}, raws...)
	if err != nil {
		return nil, err
	}

	// Accumulate any errors
	var errs *packer.MultiError
	errs = packer.MultiErrorAppend(errs, b.config.AccessConfig.Prepare(&b.config.ctx)...)
	errs = packer.MultiErrorAppend(errs, b.config.ImageConfig.Prepare(&b.config.ctx)...)
	errs = packer.MultiErrorAppend(errs, b.config.RunConfig.Prepare(&b.config.ctx)...)

	if errs != nil && len(errs.Errors) > 0 {
		return nil, errs
	}

	log.Println(common.ScrubConfig(b.config, b.config.Password))
	return nil, nil
}

開發者ID:henrysher，項目名稱:packer，代碼行數:21，代碼來源:builder.go

示例6: Prepare

func (b *Builder) Prepare(raws ...interface{}) ([]string, error) {
	b.config.ctx.Funcs = awscommon.TemplateFuncs
	err := config.Decode(&b.config, &config.DecodeOpts{
		Interpolate:        true,
		InterpolateContext: &b.config.ctx,
	}, raws...)
	if err != nil {
		return nil, err
	}

	// Accumulate any errors
	var errs *packer.MultiError
	errs = packer.MultiErrorAppend(errs, b.config.AccessConfig.Prepare(&b.config.ctx)...)
	errs = packer.MultiErrorAppend(errs, b.config.RunConfig.Prepare(&b.config.ctx)...)

	if errs != nil && len(errs.Errors) > 0 {
		return nil, errs
	}

	log.Println(common.ScrubConfig(b.config, b.config.AccessKey, b.config.SecretKey))
	return nil, nil
}

開發者ID:rnaveiras，項目名稱:packer，代碼行數:22，代碼來源:builder.go

示例7: Prepare

func (b *Builder) Prepare(raws ...interface{}) ([]string, error) {
	err := config.Decode(&b.config, &config.DecodeOpts{
		Interpolate:        true,
		InterpolateContext: &b.config.ctx,
	}, raws...)
	if err != nil {
		return nil, err
	}

	var errs *packer.MultiError
	errs = packer.MultiErrorAppend(errs, b.config.AccessConfig.Prepare(&b.config.ctx)...)
	errs = packer.MultiErrorAppend(errs, b.config.ImageConfig.Prepare(&b.config.ctx)...)
	errs = packer.MultiErrorAppend(errs, b.config.WorkloadConfig.Prepare(&b.config.ctx)...)
	errs = packer.MultiErrorAppend(errs, b.config.Comm.Prepare(&b.config.ctx)...)
	errs = packer.MultiErrorAppend(errs, b.config.MachineTypeConfig.Prepare(&b.config.ctx)...)

	if errs != nil && len(errs.Errors) > 0 {
		return nil, errs
	}

	log.Println(common.ScrubConfig(b.config, b.config.AccessToken, b.config.MacKey))

	return nil, nil
}

開發者ID:brkt，項目名稱:packer，代碼行數:24，代碼來源:builder.go

示例8: NewConfig

func NewConfig(raws ...interface{}) (*Config, []string, error) {
	c := new(Config)

	var md mapstructure.Metadata
	err := config.Decode(c, &config.DecodeOpts{
		Metadata:           &md,
		Interpolate:        true,
		InterpolateContext: &c.ctx,
		InterpolateFilter: &interpolate.RenderFilter{
			Exclude: []string{
				"run_command",
			},
		},
	}, raws...)
	if err != nil {
		return nil, nil, err
	}

	// Defaults
	if c.APIToken == "" {
		// Default to environment variable for api_token, if it exists
		c.APIToken = os.Getenv("DIGITALOCEAN_API_TOKEN")
	}

	if c.SnapshotName == "" {
		def, err := interpolate.Render("packer-{{timestamp}}", nil)
		if err != nil {
			panic(err)
		}

		// Default to packer-{{ unix timestamp (utc) }}
		c.SnapshotName = def
	}

	if c.DropletName == "" {
		// Default to packer-[time-ordered-uuid]
		c.DropletName = fmt.Sprintf("packer-%s", uuid.TimeOrderedUUID())
	}

	if c.Comm.SSHUsername == "" {
		// Default to "root". You can override this if your
		// SourceImage has a different user account then the DO default
		c.Comm.SSHUsername = "root"
	}

	if c.StateTimeout == 0 {
		// Default to 6 minute timeouts waiting for
		// desired state. i.e waiting for droplet to become active
		c.StateTimeout = 6 * time.Minute
	}

	var errs *packer.MultiError
	if es := c.Comm.Prepare(&c.ctx); len(es) > 0 {
		errs = packer.MultiErrorAppend(errs, es...)
	}
	if c.APIToken == "" {
		// Required configurations that will display errors if not set
		errs = packer.MultiErrorAppend(
			errs, errors.New("api_token for auth must be specified"))
	}

	if c.Region == "" {
		errs = packer.MultiErrorAppend(
			errs, errors.New("region is required"))
	}

	if c.Size == "" {
		errs = packer.MultiErrorAppend(
			errs, errors.New("size is required"))
	}

	if c.Image == "" {
		errs = packer.MultiErrorAppend(
			errs, errors.New("image is required"))
	}

	if errs != nil && len(errs.Errors) > 0 {
		return nil, nil, errs
	}

	common.ScrubConfig(c, c.APIToken)
	return c, nil, nil
}

開發者ID:c12simple，項目名稱:packer，代碼行數:83，代碼來源:config.go

示例9: Prepare

func (b *Builder) Prepare(raws ...interface{}) ([]string, error) {
	b.config.ctx = &interpolate.Context{Funcs: awscommon.TemplateFuncs}
	err := config.Decode(&b.config, &config.DecodeOpts{
		Interpolate:        true,
		InterpolateContext: b.config.ctx,
		InterpolateFilter: &interpolate.RenderFilter{
			Exclude: []string{
				"bundle_upload_command",
				"bundle_vol_command",
			},
		},
	}, raws...)
	if err != nil {
		return nil, err
	}

	if b.config.BundleDestination == "" {
		b.config.BundleDestination = "/tmp"
	}

	if b.config.BundlePrefix == "" {
		b.config.BundlePrefix = "image-{{timestamp}}"
	}

	if b.config.BundleUploadCommand == "" {
		b.config.BundleUploadCommand = "sudo -i -n ec2-upload-bundle " +
			"-b {{.BucketName}} " +
			"-m {{.ManifestPath}} " +
			"-a {{.AccessKey}} " +
			"-s {{.SecretKey}} " +
			"-d {{.BundleDirectory}} " +
			"--batch " +
			"--location {{.Region}} " +
			"--retry"
	}

	if b.config.BundleVolCommand == "" {
		b.config.BundleVolCommand = "sudo -i -n ec2-bundle-vol " +
			"-k {{.KeyPath}} " +
			"-u {{.AccountId}} " +
			"-c {{.CertPath}} " +
			"-r {{.Architecture}} " +
			"-e {{.PrivatePath}}/* " +
			"-d {{.Destination}} " +
			"-p {{.Prefix}} " +
			"--batch " +
			"--no-filter"
	}

	if b.config.X509UploadPath == "" {
		b.config.X509UploadPath = "/tmp"
	}

	// Accumulate any errors
	var errs *packer.MultiError
	errs = packer.MultiErrorAppend(errs, b.config.AccessConfig.Prepare(b.config.ctx)...)
	errs = packer.MultiErrorAppend(errs, b.config.BlockDevices.Prepare(b.config.ctx)...)
	errs = packer.MultiErrorAppend(errs, b.config.AMIConfig.Prepare(b.config.ctx)...)
	errs = packer.MultiErrorAppend(errs, b.config.RunConfig.Prepare(b.config.ctx)...)

	if b.config.AccountId == "" {
		errs = packer.MultiErrorAppend(errs, errors.New("account_id is required"))
	} else {
		b.config.AccountId = strings.Replace(b.config.AccountId, "-", "", -1)
	}

	if b.config.S3Bucket == "" {
		errs = packer.MultiErrorAppend(errs, errors.New("s3_bucket is required"))
	}

	if b.config.X509CertPath == "" {
		errs = packer.MultiErrorAppend(errs, errors.New("x509_cert_path is required"))
	} else if _, err := os.Stat(b.config.X509CertPath); err != nil {
		errs = packer.MultiErrorAppend(
			errs, fmt.Errorf("x509_cert_path points to bad file: %s", err))
	}

	if b.config.X509KeyPath == "" {
		errs = packer.MultiErrorAppend(errs, errors.New("x509_key_path is required"))
	} else if _, err := os.Stat(b.config.X509KeyPath); err != nil {
		errs = packer.MultiErrorAppend(
			errs, fmt.Errorf("x509_key_path points to bad file: %s", err))
	}

	if errs != nil && len(errs.Errors) > 0 {
		return nil, errs
	}

	log.Println(common.ScrubConfig(b.config, b.config.AccessKey, b.config.SecretKey))
	return nil, nil
}

開發者ID:henrysher，項目名稱:packer，代碼行數:91，代碼來源:builder.go

示例10: Prepare


//.........這裏部分代碼省略.........
	}

	if b.config.RegionID == 0 {
		// Default to Region "New York"
		b.config.RegionID = 1
	}

	if b.config.SizeID == 0 {
		// Default to 512mb, the smallest droplet size
		b.config.SizeID = 66
	}

	if b.config.ImageID == 0 {
		// Default to base image "Ubuntu 12.04.4 x64 (id: 3101045)"
		b.config.ImageID = 3101045
	}

	if b.config.SnapshotName == "" {
		// Default to packer-{{ unix timestamp (utc) }}
		b.config.SnapshotName = "packer-{{timestamp}}"
	}

	if b.config.DropletName == "" {
		// Default to packer-[time-ordered-uuid]
		b.config.DropletName = fmt.Sprintf("packer-%s", uuid.TimeOrderedUUID())
	}

	if b.config.SSHUsername == "" {
		// Default to "root". You can override this if your
		// SourceImage has a different user account then the DO default
		b.config.SSHUsername = "root"
	}

	if b.config.SSHPort == 0 {
		// Default to port 22 per DO default
		b.config.SSHPort = 22
	}

	if b.config.RawSSHTimeout == "" {
		// Default to 1 minute timeouts
		b.config.RawSSHTimeout = "1m"
	}

	if b.config.RawStateTimeout == "" {
		// Default to 6 minute timeouts waiting for
		// desired state. i.e waiting for droplet to become active
		b.config.RawStateTimeout = "6m"
	}

	templates := map[string]*string{
		"client_id":     &b.config.ClientID,
		"api_key":       &b.config.APIKey,
		"snapshot_name": &b.config.SnapshotName,
		"droplet_name":  &b.config.DropletName,
		"ssh_username":  &b.config.SSHUsername,
		"ssh_timeout":   &b.config.RawSSHTimeout,
		"state_timeout": &b.config.RawStateTimeout,
	}

	for n, ptr := range templates {
		var err error
		*ptr, err = b.config.tpl.Process(*ptr, nil)
		if err != nil {
			errs = packer.MultiErrorAppend(
				errs, fmt.Errorf("Error processing %s: %s", n, err))
		}
	}

	// Required configurations that will display errors if not set
	if b.config.ClientID == "" {
		errs = packer.MultiErrorAppend(
			errs, errors.New("a client_id must be specified"))
	}

	if b.config.APIKey == "" {
		errs = packer.MultiErrorAppend(
			errs, errors.New("an api_key must be specified"))
	}

	sshTimeout, err := time.ParseDuration(b.config.RawSSHTimeout)
	if err != nil {
		errs = packer.MultiErrorAppend(
			errs, fmt.Errorf("Failed parsing ssh_timeout: %s", err))
	}
	b.config.sshTimeout = sshTimeout

	stateTimeout, err := time.ParseDuration(b.config.RawStateTimeout)
	if err != nil {
		errs = packer.MultiErrorAppend(
			errs, fmt.Errorf("Failed parsing state_timeout: %s", err))
	}
	b.config.stateTimeout = stateTimeout

	if errs != nil && len(errs.Errors) > 0 {
		return nil, errs
	}

	common.ScrubConfig(b.config, b.config.ClientID, b.config.APIKey)
	return nil, nil
}

開發者ID:johnbellone，項目名稱:packer，代碼行數:101，代碼來源:builder.go

示例11: Prepare

func (b *Builder) Prepare(raws ...interface{}) ([]string, error) {
	b.config.ctx.Funcs = awscommon.TemplateFuncs
	err := config.Decode(&b.config, &config.DecodeOpts{
		Interpolate:        true,
		InterpolateContext: &b.config.ctx,
		InterpolateFilter: &interpolate.RenderFilter{
			Exclude: []string{
				"command_wrapper",
				"mount_path",
			},
		},
	}, raws...)
	if err != nil {
		return nil, err
	}

	// Defaults
	if b.config.ChrootMounts == nil {
		b.config.ChrootMounts = make([][]string, 0)
	}

	if b.config.CopyFiles == nil {
		b.config.CopyFiles = make([]string, 0)
	}

	if len(b.config.ChrootMounts) == 0 {
		b.config.ChrootMounts = [][]string{
			[]string{"proc", "proc", "/proc"},
			[]string{"sysfs", "sysfs", "/sys"},
			[]string{"bind", "/dev", "/dev"},
			[]string{"devpts", "devpts", "/dev/pts"},
			[]string{"binfmt_misc", "binfmt_misc", "/proc/sys/fs/binfmt_misc"},
		}
	}

	if len(b.config.CopyFiles) == 0 {
		b.config.CopyFiles = []string{"/etc/resolv.conf"}
	}

	if b.config.CommandWrapper == "" {
		b.config.CommandWrapper = "{{.Command}}"
	}

	if b.config.MountPath == "" {
		b.config.MountPath = "/mnt/packer-amazon-chroot-volumes/{{.Device}}"
	}

	if b.config.MountPartition == 0 {
		b.config.MountPartition = 1
	}

	// Accumulate any errors
	var errs *packer.MultiError
	errs = packer.MultiErrorAppend(errs, b.config.AccessConfig.Prepare(&b.config.ctx)...)
	errs = packer.MultiErrorAppend(errs, b.config.AMIConfig.Prepare(&b.config.ctx)...)

	for _, mounts := range b.config.ChrootMounts {
		if len(mounts) != 3 {
			errs = packer.MultiErrorAppend(
				errs, errors.New("Each chroot_mounts entry should be three elements."))
			break
		}
	}

	if b.config.SourceAmi == "" {
		errs = packer.MultiErrorAppend(errs, errors.New("source_ami is required."))
	}

	if errs != nil && len(errs.Errors) > 0 {
		return nil, errs
	}

	log.Println(common.ScrubConfig(b.config, b.config.AccessKey, b.config.SecretKey))
	return nil, nil
}

開發者ID:curiositycasualty，項目名稱:packer，代碼行數:75，代碼來源:builder.go

示例12: Prepare


//.........這裏部分代碼省略.........
		self.config.DatacenterName = "ams01"
	}

	if self.config.InstanceName == "" {
		self.config.InstanceName = fmt.Sprintf("packer-softlayer-%s", time.Now().Unix())
	}

	if self.config.InstanceDomain == "" {
		self.config.InstanceDomain = "defaultdomain.com"
	}

	if self.config.ImageDescription == "" {
		self.config.ImageDescription = "Instance snapshot. Generated by packer.io"
	}

	if self.config.ImageType == "" {
		self.config.ImageType = IMAGE_TYPE_FLEX
	}

	if self.config.InstanceCpu == 0 {
		self.config.InstanceCpu = 1
	}

	if self.config.InstanceMemory == 0 {
		self.config.InstanceMemory = 1024
	}

	if self.config.InstanceNetworkSpeed == 0 {
		self.config.InstanceNetworkSpeed = 10
	}

	if self.config.InstanceDiskCapacity == 0 {
		self.config.InstanceDiskCapacity = 25
	}

	if self.config.Type == "" {
		self.config.Type = "ssh"
	}

	if self.config.SSHPort == 0 {
		self.config.SSHPort = 22
	}

	if self.config.SSHUsername == "" {
		self.config.SSHUsername = "root"
	}

	if self.config.SSHTimeout == 0 {
		self.config.SSHTimeout = 5 * time.Minute
	}

	if self.config.StateTimeout == 0 {
		self.config.StateTimeout = 10 * time.Minute
	}

	// Check for required configurations that will display errors if not set
	if self.config.APIKey == "" {
		errs = packer.MultiErrorAppend(
			errs, errors.New("api_key or the SOFTLAYER_API_KEY environment variable must be specified"))
	}

	if self.config.Username == "" {
		errs = packer.MultiErrorAppend(
			errs, errors.New("username or the SOFTLAYER_USER_NAME environment variable must be specified"))
	}

	if self.config.ImageName == "" {
		errs = packer.MultiErrorAppend(
			errs, errors.New("image_name must be specified"))
	}

	if self.config.ImageType != IMAGE_TYPE_FLEX && self.config.ImageType != IMAGE_TYPE_STANDARD {
		errs = packer.MultiErrorAppend(
			errs, fmt.Errorf("Unknown image_type '%s'. Must be one of 'flex' (the default) or 'standard'.", self.config.ImageType))
	}

	if self.config.BaseImageId == "" && self.config.BaseOsCode == "" {
		errs = packer.MultiErrorAppend(
			errs, errors.New("please specify base_image_id or base_os_code"))
	}

	if self.config.BaseImageId != "" && self.config.BaseOsCode != "" {
		errs = packer.MultiErrorAppend(
			errs, errors.New("please specify only one of base_image_id or base_os_code"))
	}

	if self.config.BaseImageId != "" && self.config.SSHPrivateKey == "" {
		errs = packer.MultiErrorAppend(
			errs, errors.New("when using base_image_id, you must specify ssh_private_key_file "+
				"since automatic ssh key config for custom images isn't supported by SoftLayer API"))
	}

	log.Println(common.ScrubConfig(self.config, self.config.APIKey, self.config.Username))

	if len(errs.Errors) > 0 {
		return nil, errors.New(errs.Error())
	}

	return nil, nil
}

開發者ID:rjeczalik，項目名稱:packer-builder-softlayer，代碼行數:101，代碼來源:builder.go

示例13: Prepare


//.........這裏部分代碼省略.........
		},
	}, raws...)
	if err != nil {
		return nil, err
	}

	// Defaults
	if b.config.ChrootMounts == nil {
		b.config.ChrootMounts = make([][]string, 0)
	}

	if b.config.CopyFiles == nil {
		b.config.CopyFiles = make([]string, 0)
	}

	if len(b.config.ChrootMounts) == 0 {
		b.config.ChrootMounts = [][]string{
			{"proc", "proc", "/proc"},
			{"sysfs", "sysfs", "/sys"},
			{"bind", "/dev", "/dev"},
			{"devpts", "devpts", "/dev/pts"},
			{"binfmt_misc", "binfmt_misc", "/proc/sys/fs/binfmt_misc"},
		}
	}

	if len(b.config.CopyFiles) == 0 && !b.config.FromScratch {
		b.config.CopyFiles = []string{"/etc/resolv.conf"}
	}

	if b.config.CommandWrapper == "" {
		b.config.CommandWrapper = "{{.Command}}"
	}

	if b.config.MountPath == "" {
		b.config.MountPath = "/mnt/packer-amazon-chroot-volumes/{{.Device}}"
	}

	if b.config.MountPartition == 0 {
		b.config.MountPartition = 1
	}

	// Accumulate any errors or warnings
	var errs *packer.MultiError
	var warns []string

	errs = packer.MultiErrorAppend(errs, b.config.AccessConfig.Prepare(&b.config.ctx)...)
	errs = packer.MultiErrorAppend(errs, b.config.AMIConfig.Prepare(&b.config.ctx)...)

	for _, mounts := range b.config.ChrootMounts {
		if len(mounts) != 3 {
			errs = packer.MultiErrorAppend(
				errs, errors.New("Each chroot_mounts entry should be three elements."))
			break
		}
	}

	if b.config.FromScratch {
		if b.config.SourceAmi != "" || !b.config.SourceAmiFilter.Empty() {
			warns = append(warns, "source_ami and source_ami_filter are unused when from_scratch is true")
		}
		if b.config.RootVolumeSize == 0 {
			errs = packer.MultiErrorAppend(
				errs, errors.New("root_volume_size is required with from_scratch."))
		}
		if len(b.config.PreMountCommands) == 0 {
			errs = packer.MultiErrorAppend(
				errs, errors.New("pre_mount_commands is required with from_scratch."))
		}
		if b.config.AMIVirtType == "" {
			errs = packer.MultiErrorAppend(
				errs, errors.New("ami_virtualization_type is required with from_scratch."))
		}
		if b.config.RootDeviceName == "" {
			errs = packer.MultiErrorAppend(
				errs, errors.New("root_device_name is required with from_scratch."))
		}
		if len(b.config.AMIMappings) == 0 {
			errs = packer.MultiErrorAppend(
				errs, errors.New("ami_block_device_mappings is required with from_scratch."))
		}
	} else {
		if b.config.SourceAmi == "" && b.config.SourceAmiFilter.Empty() {
			errs = packer.MultiErrorAppend(
				errs, errors.New("source_ami or source_ami_filter is required."))
		}
		if len(b.config.AMIMappings) != 0 {
			warns = append(warns, "ami_block_device_mappings are unused when from_scratch is false")
		}
		if b.config.RootDeviceName != "" {
			warns = append(warns, "root_device_name is unused when from_scratch is false")
		}
	}

	if errs != nil && len(errs.Errors) > 0 {
		return warns, errs
	}

	log.Println(common.ScrubConfig(b.config, b.config.AccessKey, b.config.SecretKey))
	return warns, nil
}

開發者ID:bryson，項目名稱:packer，代碼行數:101，代碼來源:builder.go

示例14: Prepare


//.........這裏部分代碼省略.........
		self.config.SshPort = 22
	}

	if self.config.SshUserName == "" {
		self.config.SshUserName = "root"
	}

	if self.config.RawSshTimeout == "" {
		self.config.RawSshTimeout = "5m"
	}

	if self.config.RawStateTimeout == "" {
		self.config.RawStateTimeout = "10m"
	}

	templates := map[string]*string{
		"username":               &self.config.Username,
		"api_key":                &self.config.APIKey,
		"datacenter_name":        &self.config.DatacenterName,
		"base_image_id":          &self.config.BaseImageId,
		"image_name":             &self.config.ImageName,
		"image_description":      &self.config.ImageDescription,
		"image_type":             &self.config.ImageType,
		"base_os_code":           &self.config.BaseOsCode,
		"instance_name":          &self.config.InstanceName,
		"instance_domain":        &self.config.InstanceDomain,
		"ssh_timeout":            &self.config.RawSshTimeout,
		"instance_state_timeout": &self.config.RawStateTimeout,
		"ssh_username":           &self.config.SshUserName,
		"ssh_private_key_file":   &self.config.SshPrivateKeyFile,
	}

	for n, ptr := range templates {
		var err error
		*ptr, err = self.config.tpl.Process(*ptr, nil)
		if err != nil {
			errs = packer.MultiErrorAppend(errs, fmt.Errorf("Error processing %s: %s", n, err))
		}
	}

	// Check for required configurations that will display errors if not set
	if self.config.APIKey == "" {
		errs = packer.MultiErrorAppend(
			errs, errors.New("api_key or the SOFTLAYER_API_KEY environment variable must be specified"))
	}

	if self.config.Username == "" {
		errs = packer.MultiErrorAppend(
			errs, errors.New("username or the SOFTLAYER_USER_NAME environment variable must be specified"))
	}

	if self.config.ImageName == "" {
		errs = packer.MultiErrorAppend(
			errs, errors.New("image_name must be specified"))
	}

	if self.config.ImageType != IMAGE_TYPE_FLEX && self.config.ImageType != IMAGE_TYPE_STANDARD {
		errs = packer.MultiErrorAppend(
			errs, fmt.Errorf("Unknown image_type '%s'. Must be one of 'flex' (the default) or 'standard'.", self.config.ImageType))
	}

	if self.config.BaseImageId == "" && self.config.BaseOsCode == "" {
		errs = packer.MultiErrorAppend(
			errs, errors.New("please specify base_image_id or base_os_code"))
	}

	if self.config.BaseImageId != "" && self.config.BaseOsCode != "" {
		errs = packer.MultiErrorAppend(
			errs, errors.New("please specify only one of base_image_id or base_os_code"))
	}

	if self.config.BaseImageId != "" && self.config.SshPrivateKeyFile == "" {
		errs = packer.MultiErrorAppend(
			errs, errors.New("when using base_image_id, you must specify ssh_private_key_file "+
				"since automatic ssh key config for custom images isn't supported by SoftLayer API"))
	}

	// Translate date configuration data from string to time format
	sshTimeout, err := time.ParseDuration(self.config.RawSshTimeout)
	if err != nil {
		errs = packer.MultiErrorAppend(
			errs, fmt.Errorf("Failed parsing ssh_timeout: %s", err))
	}
	self.config.SshTimeout = sshTimeout

	stateTimeout, err := time.ParseDuration(self.config.RawStateTimeout)
	if err != nil {
		errs = packer.MultiErrorAppend(
			errs, fmt.Errorf("Failed parsing state_timeout: %s", err))
	}
	self.config.StateTimeout = stateTimeout

	log.Println(common.ScrubConfig(self.config, self.config.APIKey, self.config.Username))

	if len(errs.Errors) > 0 {
		retErr = errors.New(errs.Error())
	}

	return nil, retErr
}

開發者ID:kgrvamsi，項目名稱:packer-builder-softlayer，代碼行數:101，代碼來源:builder.go

示例15: newConfig


//.........這裏部分代碼省略.........
	randSuffix := azureCommon.RandomString("0123456789abcdefghijklmnopqrstuvwxyz", 10)
	c.tmpVmName = "PkrVM" + randSuffix
	c.tmpServiceName = "PkrSrv" + randSuffix
	c.tmpContainerName = "packer-provision-" + randSuffix

	// Check values
	var errs *packer.MultiError
	errs = packer.MultiErrorAppend(errs, c.Comm.Prepare(c.ctx)...)

	if c.SubscriptionName == "" {
		errs = packer.MultiErrorAppend(errs,
			fmt.Errorf("subscription_name must be specified"))
	}

	if c.PublishSettingsPath == "" {
		errs = packer.MultiErrorAppend(errs, fmt.Errorf("publish_settings_path must be specified"))
	}

	if c.StorageAccount == "" {
		errs = packer.MultiErrorAppend(errs, fmt.Errorf("storage_account must be specified"))
	}

	if _, err := os.Stat(c.PublishSettingsPath); err != nil {
		errs = packer.MultiErrorAppend(errs, fmt.Errorf("publish_settings_path is not a valid path: %s", err))
	}

	if !(c.OSType == constants.Target_Linux) {
		errs = packer.MultiErrorAppend(errs,
			fmt.Errorf("os_type is not valid, must be one of: %s", constants.Target_Linux))
	}

	count := 0
	if c.RemoteSourceImageLink != "" {
		count += 1
	}
	if c.OSImageLabel != "" {
		count += 1
	}
	if c.OSImageName != "" {
		count += 1
	}

	if count != 1 {
		errs = packer.MultiErrorAppend(errs, fmt.Errorf("One source and only one among os_image_label, os_image_label or remote_source_image_link has to be specified"))
	}

	if c.Location == "" {
		errs = packer.MultiErrorAppend(errs, fmt.Errorf("location must be specified"))
	}

	sizeIsValid := false

	for _, instanceSize := range allowedVMSizes {
		if c.InstanceSize == instanceSize {
			sizeIsValid = true
			break
		}
	}

	if !sizeIsValid {
		errs = packer.MultiErrorAppend(errs, fmt.Errorf("instance_size is not valid, must be one of: %v", allowedVMSizes))
	}

	for n := 0; n < len(c.DataDisks); n++ {
		switch v := c.DataDisks[n].(type) {
		case string:
		case int:
		case float64:
			if v != math.Floor(v) {
				errs = packer.MultiErrorAppend(errs, fmt.Errorf("Data disk # %d is a fractional number, needs to be integer", n))
			}
			c.DataDisks[n] = int(v)
		default:
			errs = packer.MultiErrorAppend(errs, fmt.Errorf("Data disk # %d is not a string to an existing VHD nor an integer number, but a %T", n, v))
		}
	}

	if c.UserImageLabel == "" {
		errs = packer.MultiErrorAppend(errs, fmt.Errorf("user_image_label must be specified"))
	}

	const userLabelRegex = "^[A-Za-z][A-Za-z0-9-_.]*[A-Za-z0-9]$"
	if !regexp.MustCompile(userLabelRegex).MatchString(c.UserImageLabel) {
		errs = packer.MultiErrorAppend(errs, fmt.Errorf("user_image_label is not valid, it should follow the pattern %s", userLabelRegex))
	}

	c.userImageName = c.UserImageLabel

	if (c.VNet != "" && c.Subnet == "") || (c.Subnet != "" && c.VNet == "") {
		errs = packer.MultiErrorAppend(errs, fmt.Errorf("vnet and subnet need to either both be set or both be empty"))
	}

	log.Println(common.ScrubConfig(c))

	if errs != nil && len(errs.Errors) > 0 {
		return nil, nil, errs
	}

	return &c, nil, nil
}

開發者ID:Gamesparks-OSS，項目名稱:packer-azure，代碼行數:101，代碼來源:config.go

注：本文中的github.com/mitchellh/packer/common.ScrubConfig函數示例由純淨天空整理自Github/MSDocs等開源代碼及文檔管理平台，相關代碼片段篩選自各路編程大神貢獻的開源項目，源碼版權歸原作者所有，傳播和使用請參考對應項目的License；未經允許，請勿轉載。