Golang common.MultistepDebugFn函數代碼示例

本文整理匯總了Golang中github.com/mitchellh/packer/builder/common.MultistepDebugFn函數的典型用法代碼示例。如果您正苦於以下問題：Golang MultistepDebugFn函數的具體用法？Golang MultistepDebugFn怎麽用？Golang MultistepDebugFn使用的例子？那麽, 這裏精選的函數代碼示例或許可以為您提供幫助。

在下文中一共展示了MultistepDebugFn函數的5個代碼示例，這些例子默認根據受歡迎程度排序。您可以為喜歡或者感覺有用的代碼點讚，您的評價將有助於係統推薦出更棒的Golang代碼示例。

示例1: Run

func (b *Builder) Run(ui packer.Ui, hook packer.Hook, cache packer.Cache) (packer.Artifact, error) {
	region, ok := aws.Regions[b.config.Region]
	if !ok {
		panic("region not found")
	}

	auth := aws.Auth{b.config.AccessKey, b.config.SecretKey}
	ec2conn := ec2.New(auth, region)

	// Setup the state bag and initial state for the steps
	state := make(map[string]interface{})
	state["config"] = b.config
	state["ec2"] = ec2conn
	state["hook"] = hook
	state["ui"] = ui

	// Build the steps
	steps := []multistep.Step{
		&stepKeyPair{},
		&stepSecurityGroup{},
		&stepRunSourceInstance{},
		&stepConnectSSH{},
		&stepProvision{},
		&stepStopInstance{},
		&stepCreateAMI{},
	}

	// Run!
	if b.config.PackerDebug {
		b.runner = &multistep.DebugRunner{
			Steps:   steps,
			PauseFn: common.MultistepDebugFn(ui),
		}
	} else {
		b.runner = &multistep.BasicRunner{Steps: steps}
	}

	b.runner.Run(state)

	// If there was an error, return that
	if rawErr, ok := state["error"]; ok {
		return nil, rawErr.(error)
	}

	// If there are no AMIs, then just return
	if _, ok := state["amis"]; !ok {
		return nil, nil
	}

	// Build the artifact and return it
	artifact := &artifact{
		amis: state["amis"].(map[string]string),
		conn: ec2conn,
	}

	return artifact, nil
}

開發者ID:smerrill，項目名稱:packer，代碼行數:57，代碼來源:builder.go

示例2: Run

func (b *Builder) Run(ui packer.Ui, hook packer.Hook, cache packer.Cache) (packer.Artifact, error) {
	// Initialize the DO API client
	client := DigitalOceanClient{}.New(b.config.ClientID, b.config.APIKey)

	// Set up the state
	state := make(map[string]interface{})
	state["config"] = b.config
	state["client"] = client
	state["hook"] = hook
	state["ui"] = ui

	// Build the steps
	steps := []multistep.Step{
		new(stepCreateSSHKey),
		new(stepCreateDroplet),
		new(stepDropletInfo),
		&common.StepConnectSSH{
			SSHAddress:     sshAddress,
			SSHConfig:      sshConfig,
			SSHWaitTimeout: 5 * time.Minute,
		},
		new(common.StepProvision),
		new(stepPowerOff),
		new(stepSnapshot),
	}

	// Run the steps
	if b.config.PackerDebug {
		b.runner = &multistep.DebugRunner{
			Steps:   steps,
			PauseFn: common.MultistepDebugFn(ui),
		}
	} else {
		b.runner = &multistep.BasicRunner{Steps: steps}
	}

	b.runner.Run(state)

	// If there was an error, return that
	if rawErr, ok := state["error"]; ok {
		return nil, rawErr.(error)
	}

	if _, ok := state["snapshot_name"]; !ok {
		log.Println("Failed to find snapshot_name in state. Bug?")
		return nil, nil
	}

	artifact := &Artifact{
		snapshotName: state["snapshot_name"].(string),
		snapshotId:   state["snapshot_image_id"].(uint),
		client:       client,
	}

	return artifact, nil
}

開發者ID:psi，項目名稱:packer，代碼行數:56，代碼來源:builder.go

示例3: Run

func (b *Builder) Run(ui packer.Ui, hook packer.Hook, cache packer.Cache) (packer.Artifact, error) {
	region, ok := aws.Regions[b.config.Region]
	if !ok {
		panic("region not found")
	}

	auth, err := b.config.AccessConfig.Auth()
	if err != nil {
		return nil, err
	}

	ec2conn := ec2.New(auth, region)

	// Setup the state bag and initial state for the steps
	state := make(map[string]interface{})
	state["config"] = &b.config
	state["ec2"] = ec2conn
	state["hook"] = hook
	state["ui"] = ui

	// Build the steps
	steps := []multistep.Step{
		&awscommon.StepKeyPair{},
		&awscommon.StepSecurityGroup{
			SecurityGroupId: b.config.SecurityGroupId,
			SSHPort:         b.config.SSHPort,
			VpcId:           b.config.VpcId,
		},
		&awscommon.StepRunSourceInstance{
			ExpectedRootDevice: "instance-store",
			InstanceType:       b.config.InstanceType,
			SourceAMI:          b.config.SourceAmi,
			SubnetId:           b.config.SubnetId,
		},
		&common.StepConnectSSH{
			SSHAddress:     awscommon.SSHAddress(b.config.SSHPort),
			SSHConfig:      awscommon.SSHConfig(b.config.SSHUsername),
			SSHWaitTimeout: b.config.SSHTimeout(),
		},
		&common.StepProvision{},
		&StepUploadX509Cert{},
		&StepBundleVolume{},
		&StepUploadBundle{},
		&StepRegisterAMI{},
	}

	// Run!
	if b.config.PackerDebug {
		b.runner = &multistep.DebugRunner{
			Steps:   steps,
			PauseFn: common.MultistepDebugFn(ui),
		}
	} else {
		b.runner = &multistep.BasicRunner{Steps: steps}
	}

	b.runner.Run(state)

	// If there was an error, return that
	if rawErr, ok := state["error"]; ok {
		return nil, rawErr.(error)
	}

	// If there are no AMIs, then just return
	if _, ok := state["amis"]; !ok {
		return nil, nil
	}

	// Build the artifact and return it
	artifact := &awscommon.Artifact{
		Amis:           state["amis"].(map[string]string),
		BuilderIdValue: BuilderId,
		Conn:           ec2conn,
	}

	return artifact, nil
}

開發者ID:jstamerj，項目名稱:packer，代碼行數:77，代碼來源:builder.go

示例4: Run

func (b *Builder) Run(ui packer.Ui, hook packer.Hook, cache packer.Cache) (packer.Artifact, error) {
	// Seed the random number generator
	rand.Seed(time.Now().UTC().UnixNano())

	steps := []multistep.Step{
		&stepPrepareTools{},
		&stepDownloadISO{},
		&stepPrepareOutputDir{},
		&common.StepCreateFloppy{
			Files: b.config.FloppyFiles,
		},
		&stepCreateDisk{},
		&stepCreateVMX{},
		&stepHTTPServer{},
		&stepConfigureVNC{},
		&stepRun{},
		&stepTypeBootCommand{},
		&common.StepConnectSSH{
			SSHAddress:     sshAddress,
			SSHConfig:      sshConfig,
			SSHWaitTimeout: b.config.sshWaitTimeout,
		},
		&stepUploadTools{},
		&common.StepProvision{},
		&stepShutdown{},
		&stepCleanFiles{},
		&stepCleanVMX{},
		&stepCompactDisk{},
	}

	// Setup the state bag
	state := make(map[string]interface{})
	state["cache"] = cache
	state["config"] = &b.config
	state["driver"] = b.driver
	state["hook"] = hook
	state["ui"] = ui

	// Run!
	if b.config.PackerDebug {
		b.runner = &multistep.DebugRunner{
			Steps:   steps,
			PauseFn: common.MultistepDebugFn(ui),
		}
	} else {
		b.runner = &multistep.BasicRunner{Steps: steps}
	}

	b.runner.Run(state)

	// If there was an error, return that
	if rawErr, ok := state["error"]; ok {
		return nil, rawErr.(error)
	}

	// If we were interrupted or cancelled, then just exit.
	if _, ok := state[multistep.StateCancelled]; ok {
		return nil, errors.New("Build was cancelled.")
	}

	if _, ok := state[multistep.StateHalted]; ok {
		return nil, errors.New("Build was halted.")
	}

	// Compile the artifact list
	files := make([]string, 0, 10)
	visit := func(path string, info os.FileInfo, err error) error {
		if err != nil {
			return err
		}

		if !info.IsDir() {
			files = append(files, path)
		}

		return nil
	}

	if err := filepath.Walk(b.config.OutputDir, visit); err != nil {
		return nil, err
	}

	return &Artifact{b.config.OutputDir, files}, nil
}

開發者ID:robinbowes，項目名稱:packer，代碼行數:84，代碼來源:builder.go

示例5: Run

func (b *Builder) Run(ui packer.Ui, hook packer.Hook, cache packer.Cache) (packer.Artifact, error) {
	steps := []multistep.Step{
		new(stepDownloadGuestAdditions),
		new(stepDownloadISO),
		new(stepPrepareOutputDir),
		&common.StepCreateFloppy{
			Files: b.config.FloppyFiles,
		},
		new(stepHTTPServer),
		new(stepSuppressMessages),
		new(stepCreateVM),
		new(stepCreateDisk),
		new(stepAttachISO),
		new(stepAttachFloppy),
		new(stepForwardSSH),
		new(stepVBoxManage),
		new(stepRun),
		new(stepTypeBootCommand),
		new(stepWaitForSSH),
		new(stepUploadVersion),
		new(stepUploadGuestAdditions),
		new(stepProvision),
		new(stepShutdown),
		new(stepExport),
	}

	// Setup the state bag
	state := make(map[string]interface{})
	state["cache"] = cache
	state["config"] = &b.config
	state["driver"] = b.driver
	state["hook"] = hook
	state["ui"] = ui

	// Run
	if b.config.PackerDebug {
		b.runner = &multistep.DebugRunner{
			Steps:   steps,
			PauseFn: common.MultistepDebugFn(ui),
		}
	} else {
		b.runner = &multistep.BasicRunner{Steps: steps}
	}

	b.runner.Run(state)

	// If there was an error, return that
	if rawErr, ok := state["error"]; ok {
		return nil, rawErr.(error)
	}

	// If we were interrupted or cancelled, then just exit.
	if _, ok := state[multistep.StateCancelled]; ok {
		return nil, errors.New("Build was cancelled.")
	}

	if _, ok := state[multistep.StateHalted]; ok {
		return nil, errors.New("Build was halted.")
	}

	// Compile the artifact list
	files := make([]string, 0, 5)
	visit := func(path string, info os.FileInfo, err error) error {
		if !info.IsDir() {
			files = append(files, path)
		}

		return err
	}

	if err := filepath.Walk(b.config.OutputDir, visit); err != nil {
		return nil, err
	}

	artifact := &Artifact{
		dir: b.config.OutputDir,
		f:   files,
	}

	return artifact, nil
}

開發者ID:ROBLOX，項目名稱:packer，代碼行數:81，代碼來源:builder.go

注：本文中的github.com/mitchellh/packer/builder/common.MultistepDebugFn函數示例由純淨天空整理自Github/MSDocs等開源代碼及文檔管理平台，相關代碼片段篩選自各路編程大神貢獻的開源項目，源碼版權歸原作者所有，傳播和使用請參考對應項目的License；未經允許，請勿轉載。