Golang common.SSHConfig函數代碼示例

本文整理匯總了Golang中github.com/mitchellh/packer/builder/amazon/common.SSHConfig函數的典型用法代碼示例。如果您正苦於以下問題：Golang SSHConfig函數的具體用法？Golang SSHConfig怎麽用？Golang SSHConfig使用的例子？那麽, 這裏精選的函數代碼示例或許可以為您提供幫助。

在下文中一共展示了SSHConfig函數的6個代碼示例，這些例子默認根據受歡迎程度排序。您可以為喜歡或者感覺有用的代碼點讚，您的評價將有助於係統推薦出更棒的Golang代碼示例。

示例1: Run

func (b *Builder) Run(ui packer.Ui, hook packer.Hook, cache packer.Cache) (packer.Artifact, error) {
	region, err := b.config.Region()
	if err != nil {
		return nil, err
	}

	auth, err := b.config.AccessConfig.Auth()
	if err != nil {
		return nil, err
	}

	ec2conn := ec2.New(auth, region)

	// Setup the state bag and initial state for the steps
	state := new(multistep.BasicStateBag)
	state.Put("config", &b.config)
	state.Put("ec2", ec2conn)
	state.Put("hook", hook)
	state.Put("ui", ui)

	// Build the steps
	steps := []multistep.Step{
		&awscommon.StepKeyPair{
			Debug:          b.config.PackerDebug,
			DebugKeyPath:   fmt.Sprintf("ec2_%s.pem", b.config.PackerBuildName),
			KeyPairName:    b.config.TemporaryKeyPairName,
			PrivateKeyFile: b.config.SSHPrivateKeyFile,
		},
		&awscommon.StepSecurityGroup{
			SecurityGroupIds: b.config.SecurityGroupIds,
			SSHPort:          b.config.SSHPort,
			VpcId:            b.config.VpcId,
		},
		&awscommon.StepRunSourceInstance{
			Debug:                    b.config.PackerDebug,
			ExpectedRootDevice:       "instance-store",
			InstanceType:             b.config.InstanceType,
			IamInstanceProfile:       b.config.IamInstanceProfile,
			UserData:                 b.config.UserData,
			UserDataFile:             b.config.UserDataFile,
			SourceAMI:                b.config.SourceAmi,
			SubnetId:                 b.config.SubnetId,
			AssociatePublicIpAddress: b.config.AssociatePublicIpAddress,
			AvailabilityZone:         b.config.AvailabilityZone,
			BlockDevices:             b.config.BlockDevices,
			Tags:                     b.config.RunTags,
		},
		&common.StepConnectSSH{
			SSHAddress:     awscommon.SSHAddress(ec2conn, b.config.SSHPort),
			SSHConfig:      awscommon.SSHConfig(b.config.SSHUsername),
			SSHWaitTimeout: b.config.SSHTimeout(),
		},
		&common.StepProvision{},
		&StepUploadX509Cert{},
		&StepBundleVolume{},
		&StepUploadBundle{},
		&StepRegisterAMI{},
		&awscommon.StepAMIRegionCopy{
			Regions: b.config.AMIRegions,
		},
		&awscommon.StepModifyAMIAttributes{
			Description:  b.config.AMIDescription,
			Users:        b.config.AMIUsers,
			Groups:       b.config.AMIGroups,
			ProductCodes: b.config.AMIProductCodes,
		},
		&awscommon.StepCreateTags{
			Tags: b.config.AMITags,
		},
	}

	// Run!
	if b.config.PackerDebug {
		b.runner = &multistep.DebugRunner{
			Steps:   steps,
			PauseFn: common.MultistepDebugFn(ui),
		}
	} else {
		b.runner = &multistep.BasicRunner{Steps: steps}
	}

	b.runner.Run(state)

	// If there was an error, return that
	if rawErr, ok := state.GetOk("error"); ok {
		return nil, rawErr.(error)
	}

	// If there are no AMIs, then just return
	if _, ok := state.GetOk("amis"); !ok {
		return nil, nil
	}

	// Build the artifact and return it
	artifact := &awscommon.Artifact{
		Amis:           state.Get("amis").(map[string]string),
		BuilderIdValue: BuilderId,
		Conn:           ec2conn,
	}

//.........這裏部分代碼省略.........

開發者ID:Nitron，項目名稱:packer，代碼行數:101，代碼來源:builder.go

示例2: Run

func (b *Builder) Run(ui packer.Ui, hook packer.Hook, cache packer.Cache) (packer.Artifact, error) {
	config, err := b.config.Config()
	if err != nil {
		return nil, err
	}

	session, err := session.NewSession(config)
	if err != nil {
		return nil, err
	}
	ec2conn := ec2.New(session)

	// If the subnet is specified but not the AZ, try to determine the AZ automatically
	if b.config.SubnetId != "" && b.config.AvailabilityZone == "" {
		log.Printf("[INFO] Finding AZ for the given subnet '%s'", b.config.SubnetId)
		resp, err := ec2conn.DescribeSubnets(&ec2.DescribeSubnetsInput{SubnetIds: []*string{&b.config.SubnetId}})
		if err != nil {
			return nil, err
		}
		b.config.AvailabilityZone = *resp.Subnets[0].AvailabilityZone
		log.Printf("[INFO] AZ found: '%s'", b.config.AvailabilityZone)
	}

	// Setup the state bag and initial state for the steps
	state := new(multistep.BasicStateBag)
	state.Put("config", b.config)
	state.Put("ec2", ec2conn)
	state.Put("hook", hook)
	state.Put("ui", ui)

	// Build the steps
	steps := []multistep.Step{
		&awscommon.StepPreValidate{
			DestAmiName:     b.config.AMIName,
			ForceDeregister: b.config.AMIForceDeregister,
		},
		&awscommon.StepSourceAMIInfo{
			SourceAmi:          b.config.SourceAmi,
			EnhancedNetworking: b.config.AMIEnhancedNetworking,
			AmiFilters:         b.config.SourceAmiFilter,
		},
		&awscommon.StepKeyPair{
			Debug:                b.config.PackerDebug,
			SSHAgentAuth:         b.config.Comm.SSHAgentAuth,
			DebugKeyPath:         fmt.Sprintf("ec2_%s.pem", b.config.PackerBuildName),
			KeyPairName:          b.config.SSHKeyPairName,
			TemporaryKeyPairName: b.config.TemporaryKeyPairName,
			PrivateKeyFile:       b.config.RunConfig.Comm.SSHPrivateKey,
		},
		&awscommon.StepSecurityGroup{
			SecurityGroupIds: b.config.SecurityGroupIds,
			CommConfig:       &b.config.RunConfig.Comm,
			VpcId:            b.config.VpcId,
		},
		&stepCleanupVolumes{
			BlockDevices: b.config.BlockDevices,
		},
		&awscommon.StepRunSourceInstance{
			Debug:                    b.config.PackerDebug,
			ExpectedRootDevice:       "ebs",
			SpotPrice:                b.config.SpotPrice,
			SpotPriceProduct:         b.config.SpotPriceAutoProduct,
			InstanceType:             b.config.InstanceType,
			UserData:                 b.config.UserData,
			UserDataFile:             b.config.UserDataFile,
			SourceAMI:                b.config.SourceAmi,
			IamInstanceProfile:       b.config.IamInstanceProfile,
			SubnetId:                 b.config.SubnetId,
			AssociatePublicIpAddress: b.config.AssociatePublicIpAddress,
			EbsOptimized:             b.config.EbsOptimized,
			AvailabilityZone:         b.config.AvailabilityZone,
			BlockDevices:             b.config.BlockDevices,
			Tags:                     b.config.RunTags,
			InstanceInitiatedShutdownBehavior: b.config.InstanceInitiatedShutdownBehavior,
		},
		&stepTagEBSVolumes{
			VolumeRunTags: b.config.VolumeRunTags,
		},
		&awscommon.StepGetPassword{
			Debug:   b.config.PackerDebug,
			Comm:    &b.config.RunConfig.Comm,
			Timeout: b.config.WindowsPasswordTimeout,
		},
		&communicator.StepConnect{
			Config: &b.config.RunConfig.Comm,
			Host: awscommon.SSHHost(
				ec2conn,
				b.config.SSHPrivateIp),
			SSHConfig: awscommon.SSHConfig(
				b.config.RunConfig.Comm.SSHAgentAuth,
				b.config.RunConfig.Comm.SSHUsername,
				b.config.RunConfig.Comm.SSHPassword),
		},
		&common.StepProvision{},
		&awscommon.StepStopEBSBackedInstance{
			SpotPrice:           b.config.SpotPrice,
			DisableStopInstance: b.config.DisableStopInstance,
		},
		&awscommon.StepModifyEBSBackedInstance{
			EnableEnhancedNetworking: b.config.AMIEnhancedNetworking,
//.........這裏部分代碼省略.........

開發者ID:bryson，項目名稱:packer，代碼行數:101，代碼來源:builder.go

示例3: Run

func (b *Builder) Run(ui packer.Ui, hook packer.Hook, cache packer.Cache) (packer.Artifact, error) {
	config, err := b.config.Config()
	if err != nil {
		return nil, err
	}

	ec2conn := ec2.New(config)

	// Setup the state bag and initial state for the steps
	state := new(multistep.BasicStateBag)
	state.Put("config", b.config)
	state.Put("ec2", ec2conn)
	state.Put("hook", hook)
	state.Put("ui", ui)

	// Build the steps
	steps := []multistep.Step{
		&awscommon.StepPreValidate{
			DestAmiName:     b.config.AMIName,
			ForceDeregister: b.config.AMIForceDeregister,
		},
		&awscommon.StepSourceAMIInfo{
			SourceAmi:          b.config.SourceAmi,
			EnhancedNetworking: b.config.AMIEnhancedNetworking,
		},
		&awscommon.StepKeyPair{
			Debug:                b.config.PackerDebug,
			DebugKeyPath:         fmt.Sprintf("ec2_%s.pem", b.config.PackerBuildName),
			KeyPairName:          b.config.SSHKeyPairName,
			TemporaryKeyPairName: b.config.TemporaryKeyPairName,
			PrivateKeyFile:       b.config.RunConfig.Comm.SSHPrivateKey,
		},
		&awscommon.StepSecurityGroup{
			SecurityGroupIds: b.config.SecurityGroupIds,
			CommConfig:       &b.config.RunConfig.Comm,
			VpcId:            b.config.VpcId,
		},
		&stepCleanupVolumes{
			BlockDevices: b.config.BlockDevices,
		},
		&awscommon.StepRunSourceInstance{
			Debug:                    b.config.PackerDebug,
			ExpectedRootDevice:       "ebs",
			SpotPrice:                b.config.SpotPrice,
			SpotPriceProduct:         b.config.SpotPriceAutoProduct,
			InstanceType:             b.config.InstanceType,
			UserData:                 b.config.UserData,
			UserDataFile:             b.config.UserDataFile,
			SourceAMI:                b.config.SourceAmi,
			IamInstanceProfile:       b.config.IamInstanceProfile,
			SubnetId:                 b.config.SubnetId,
			AssociatePublicIpAddress: b.config.AssociatePublicIpAddress,
			AvailabilityZone:         b.config.AvailabilityZone,
			BlockDevices:             b.config.BlockDevices,
			Tags:                     b.config.RunTags,
		},
		&awscommon.StepGetPassword{
			Comm:    &b.config.RunConfig.Comm,
			Timeout: b.config.WindowsPasswordTimeout,
		},
		&communicator.StepConnect{
			Config: &b.config.RunConfig.Comm,
			Host: awscommon.SSHHost(
				ec2conn,
				b.config.SSHPrivateIp),
			SSHConfig: awscommon.SSHConfig(
				b.config.RunConfig.Comm.SSHUsername),
		},
		&common.StepProvision{},
		&stepStopInstance{SpotPrice: b.config.SpotPrice},
		// TODO(mitchellh): verify works with spots
		&stepModifyInstance{},
		&awscommon.StepDeregisterAMI{
			ForceDeregister: b.config.AMIForceDeregister,
			AMIName:         b.config.AMIName,
		},
		&stepCreateAMI{},
		&awscommon.StepAMIRegionCopy{
			AccessConfig: &b.config.AccessConfig,
			Regions:      b.config.AMIRegions,
			Name:         b.config.AMIName,
		},
		&awscommon.StepModifyAMIAttributes{
			Description: b.config.AMIDescription,
			Users:       b.config.AMIUsers,
			Groups:      b.config.AMIGroups,
		},
		&awscommon.StepCreateTags{
			Tags: b.config.AMITags,
		},
	}

	// Run!
	if b.config.PackerDebug {
		b.runner = &multistep.DebugRunner{
			Steps:   steps,
			PauseFn: common.MultistepDebugFn(ui),
		}
	} else {
		b.runner = &multistep.BasicRunner{Steps: steps}
//.........這裏部分代碼省略.........

開發者ID:cewood，項目名稱:packer，代碼行數:101，代碼來源:builder.go

示例4: Run

func (b *Builder) Run(ui packer.Ui, hook packer.Hook, cache packer.Cache) (packer.Artifact, error) {
	region, ok := aws.Regions[b.config.Region]
	if !ok {
		panic("region not found")
	}

	auth, err := b.config.AccessConfig.Auth()
	if err != nil {
		return nil, err
	}

	ec2conn := ec2.New(auth, region)

	// Setup the state bag and initial state for the steps
	state := make(map[string]interface{})
	state["config"] = &b.config
	state["ec2"] = ec2conn
	state["hook"] = hook
	state["ui"] = ui

	// Build the steps
	steps := []multistep.Step{
		&awscommon.StepKeyPair{},
		&awscommon.StepSecurityGroup{
			SecurityGroupId: b.config.SecurityGroupId,
			SSHPort:         b.config.SSHPort,
			VpcId:           b.config.VpcId,
		},
		&awscommon.StepRunSourceInstance{
			ExpectedRootDevice: "instance-store",
			InstanceType:       b.config.InstanceType,
			SourceAMI:          b.config.SourceAmi,
			SubnetId:           b.config.SubnetId,
		},
		&common.StepConnectSSH{
			SSHAddress:     awscommon.SSHAddress(b.config.SSHPort),
			SSHConfig:      awscommon.SSHConfig(b.config.SSHUsername),
			SSHWaitTimeout: b.config.SSHTimeout(),
		},
		&common.StepProvision{},
		&StepUploadX509Cert{},
		&StepBundleVolume{},
		&StepUploadBundle{},
		&StepRegisterAMI{},
	}

	// Run!
	if b.config.PackerDebug {
		b.runner = &multistep.DebugRunner{
			Steps:   steps,
			PauseFn: common.MultistepDebugFn(ui),
		}
	} else {
		b.runner = &multistep.BasicRunner{Steps: steps}
	}

	b.runner.Run(state)

	// If there was an error, return that
	if rawErr, ok := state["error"]; ok {
		return nil, rawErr.(error)
	}

	// If there are no AMIs, then just return
	if _, ok := state["amis"]; !ok {
		return nil, nil
	}

	// Build the artifact and return it
	artifact := &awscommon.Artifact{
		Amis:           state["amis"].(map[string]string),
		BuilderIdValue: BuilderId,
		Conn:           ec2conn,
	}

	return artifact, nil
}

開發者ID:jstamerj，項目名稱:packer，代碼行數:77，代碼來源:builder.go

示例5: Run

func (b *Builder) Run(ui packer.Ui, hook packer.Hook, cache packer.Cache) (packer.Artifact, error) {
	region, err := b.config.Region()
	if err != nil {
		return nil, err
	}

	auth, err := b.config.AccessConfig.Auth()
	if err != nil {
		return nil, err
	}

	ec2conn := ec2.New(auth, region)

	// Setup the state bag and initial state for the steps
	state := make(map[string]interface{})
	state["config"] = b.config
	state["ec2"] = ec2conn
	state["hook"] = hook
	state["ui"] = ui

	// Build the steps
	steps := []multistep.Step{
		&awscommon.StepKeyPair{},
		&awscommon.StepSecurityGroup{
			SecurityGroupId: b.config.SecurityGroupId,
			SSHPort:         b.config.SSHPort,
			VpcId:           b.config.VpcId,
		},
		&awscommon.StepRunSourceInstance{
			ExpectedRootDevice: "ebs",
			InstanceType:       b.config.InstanceType,
			UserData:           b.config.UserData,
			UserDataFile:       b.config.UserDataFile,
			SourceAMI:          b.config.SourceAmi,
			IamInstanceProfile: b.config.IamInstanceProfile,
			SubnetId:           b.config.SubnetId,
			BlockDevices:       b.config.BlockDevices,
		},
		&common.StepConnectSSH{
			SSHAddress:     awscommon.SSHAddress(ec2conn, b.config.SSHPort),
			SSHConfig:      awscommon.SSHConfig(b.config.SSHUsername),
			SSHWaitTimeout: b.config.SSHTimeout(),
		},
		&common.StepProvision{},
		&stepStopInstance{},
		&stepCreateAMI{},
		&awscommon.StepCreateTags{Tags: b.config.Tags},
		&awscommon.StepModifyAMIAttributes{
			Description: b.config.AMIDescription,
			Users:       b.config.AMIUsers,
			Groups:      b.config.AMIGroups,
		},
	}

	// Run!
	if b.config.PackerDebug {
		b.runner = &multistep.DebugRunner{
			Steps:   steps,
			PauseFn: common.MultistepDebugFn(ui),
		}
	} else {
		b.runner = &multistep.BasicRunner{Steps: steps}
	}

	b.runner.Run(state)

	// If there was an error, return that
	if rawErr, ok := state["error"]; ok {
		return nil, rawErr.(error)
	}

	// If there are no AMIs, then just return
	if _, ok := state["amis"]; !ok {
		return nil, nil
	}

	// Build the artifact and return it
	artifact := &awscommon.Artifact{
		Amis:           state["amis"].(map[string]string),
		BuilderIdValue: BuilderId,
		Conn:           ec2conn,
	}

	return artifact, nil
}

開發者ID:phobos182，項目名稱:packer，代碼行數:85，代碼來源:builder.go

示例6: Run

func (b *Builder) Run(ui packer.Ui, hook packer.Hook, cache packer.Cache) (packer.Artifact, error) {
	config, err := b.config.Config()
	if err != nil {
		return nil, err
	}

	session, err := session.NewSession(config)
	if err != nil {
		return nil, errwrap.Wrapf("Error creating AWS Session: {{err}}", err)
	}

	ec2conn := ec2.New(session)

	// If the subnet is specified but not the AZ, try to determine the AZ automatically
	if b.config.SubnetId != "" && b.config.AvailabilityZone == "" {
		log.Printf("[INFO] Finding AZ for the given subnet '%s'", b.config.SubnetId)
		resp, err := ec2conn.DescribeSubnets(&ec2.DescribeSubnetsInput{SubnetIds: []*string{&b.config.SubnetId}})
		if err != nil {
			return nil, err
		}
		b.config.AvailabilityZone = *resp.Subnets[0].AvailabilityZone
		log.Printf("[INFO] AZ found: '%s'", b.config.AvailabilityZone)
	}

	// Setup the state bag and initial state for the steps
	state := new(multistep.BasicStateBag)
	state.Put("config", b.config)
	state.Put("ec2", ec2conn)
	state.Put("hook", hook)
	state.Put("ui", ui)

	launchBlockDevices := commonBlockDevices(b.config.VolumeMappings)

	var volumeIds *[]string

	// Build the steps
	steps := []multistep.Step{
		&awscommon.StepSourceAMIInfo{
			SourceAmi:          b.config.SourceAmi,
			EnhancedNetworking: b.config.AMIEnhancedNetworking,
			AmiFilters:         b.config.SourceAmiFilter,
		},
		&awscommon.StepKeyPair{
			Debug:                b.config.PackerDebug,
			DebugKeyPath:         fmt.Sprintf("ec2_%s.pem", b.config.PackerBuildName),
			KeyPairName:          b.config.SSHKeyPairName,
			TemporaryKeyPairName: b.config.TemporaryKeyPairName,
			PrivateKeyFile:       b.config.RunConfig.Comm.SSHPrivateKey,
		},
		&awscommon.StepSecurityGroup{
			SecurityGroupIds: b.config.SecurityGroupIds,
			CommConfig:       &b.config.RunConfig.Comm,
			VpcId:            b.config.VpcId,
		},
		&awscommon.StepRunSourceInstance{
			Debug:                    b.config.PackerDebug,
			ExpectedRootDevice:       "ebs",
			SpotPrice:                b.config.SpotPrice,
			SpotPriceProduct:         b.config.SpotPriceAutoProduct,
			InstanceType:             b.config.InstanceType,
			UserData:                 b.config.UserData,
			UserDataFile:             b.config.UserDataFile,
			SourceAMI:                b.config.SourceAmi,
			IamInstanceProfile:       b.config.IamInstanceProfile,
			SubnetId:                 b.config.SubnetId,
			AssociatePublicIpAddress: b.config.AssociatePublicIpAddress,
			EbsOptimized:             b.config.EbsOptimized,
			AvailabilityZone:         b.config.AvailabilityZone,
			BlockDevices:             launchBlockDevices,
			Tags:                     b.config.RunTags,
			InstanceInitiatedShutdownBehavior: b.config.InstanceInitiatedShutdownBehavior,
		},
		&stepTagEBSVolumes{
			VolumeMapping: b.config.VolumeMappings,
			VolumeIDs:     &volumeIds,
		},
		&awscommon.StepGetPassword{
			Debug:   b.config.PackerDebug,
			Comm:    &b.config.RunConfig.Comm,
			Timeout: b.config.WindowsPasswordTimeout,
		},
		&communicator.StepConnect{
			Config: &b.config.RunConfig.Comm,
			Host: awscommon.SSHHost(
				ec2conn,
				b.config.SSHPrivateIp),
			SSHConfig: awscommon.SSHConfig(
				b.config.RunConfig.Comm.SSHAgentAuth,
				b.config.RunConfig.Comm.SSHUsername,
				b.config.RunConfig.Comm.SSHPassword),
		},
		&common.StepProvision{},
		&awscommon.StepStopEBSBackedInstance{
			SpotPrice:           b.config.SpotPrice,
			DisableStopInstance: b.config.DisableStopInstance,
		},
		&awscommon.StepModifyEBSBackedInstance{
			EnableEnhancedNetworking: b.config.AMIEnhancedNetworking,
		},
	}
//.........這裏部分代碼省略.........

開發者ID:rnaveiras，項目名稱:packer，代碼行數:101，代碼來源:builder.go

注：本文中的github.com/mitchellh/packer/builder/amazon/common.SSHConfig函數示例由純淨天空整理自Github/MSDocs等開源代碼及文檔管理平台，相關代碼片段篩選自各路編程大神貢獻的開源項目，源碼版權歸原作者所有，傳播和使用請參考對應項目的License；未經允許，請勿轉載。