Golang LightningWallet.NewAddress方法代碼示例

func loadTestCredits(miner *rpctest.Harness, w *lnwallet.LightningWallet, numOutputs, btcPerOutput int) error {
	// Using the mining node, spend from a coinbase output numOutputs to
	// give us btcPerOutput with each output.
	satoshiPerOutput := int64(btcPerOutput * 1e8)
	addrs := make([]btcutil.Address, 0, numOutputs)
	for i := 0; i < numOutputs; i++ {
		// Grab a fresh address from the wallet to house this output.
		walletAddr, err := w.NewAddress(lnwallet.WitnessPubKey, false)
		if err != nil {
			return err
		}

		script, err := txscript.PayToAddrScript(walletAddr)
		if err != nil {
			return err
		}

		addrs = append(addrs, walletAddr)

		output := &wire.TxOut{satoshiPerOutput, script}
		if _, err := miner.CoinbaseSpend([]*wire.TxOut{output}); err != nil {
			return err
		}
	}

	// TODO(roasbeef): shouldn't hardcode 10, use config param that dictates
	// how many confs we wait before opening a channel.
	// Generate 10 blocks with the mining node, this should mine all
	// numOutputs transactions created above. We generate 10 blocks here
	// in order to give all the outputs a "sufficient" number of confirmations.
	if _, err := miner.Node.Generate(10); err != nil {
		return err
	}

	// Wait until the wallet has finished syncing up to the main chain.
	ticker := time.NewTicker(100 * time.Millisecond)
	expectedBalance := btcutil.Amount(satoshiPerOutput * int64(numOutputs))
out:
	for {
		select {
		case <-ticker.C:
			balance, err := w.ConfirmedBalance(1, false)
			if err != nil {
				return err
			}
			if balance == expectedBalance {
				break out
			}
		}
	}
	ticker.Stop()

	return nil
}

func testListTransactionDetails(miner *rpctest.Harness, wallet *lnwallet.LightningWallet, t *testing.T) {
	t.Log("Running list transaction details test")

	// Create 5 new outputs spendable by the wallet.
	const numTxns = 5
	const outputAmt = btcutil.SatoshiPerBitcoin
	txids := make(map[wire.ShaHash]struct{})
	for i := 0; i < numTxns; i++ {
		addr, err := wallet.NewAddress(lnwallet.WitnessPubKey, false)
		if err != nil {
			t.Fatalf("unable to create new address: %v", err)
		}
		script, err := txscript.PayToAddrScript(addr)
		if err != nil {
			t.Fatalf("unable to create output script: %v", err)
		}

		output := &wire.TxOut{outputAmt, script}
		txid, err := miner.CoinbaseSpend([]*wire.TxOut{output})
		if err != nil {
			t.Fatalf("unable to send coinbase: %v", err)
		}
		txids[*txid] = struct{}{}
	}

	// Generate 10 blocks to mine all the transactions created above.
	const numBlocksMined = 10
	blocks, err := miner.Node.Generate(numBlocksMined)
	if err != nil {
		t.Fatalf("unable to mine blocks: %v", err)
	}

	// Next, fetch all the current transaction details.
	// TODO(roasbeef): use ntfn client here instead?
	time.Sleep(time.Second * 2)
	txDetails, err := wallet.ListTransactionDetails()
	if err != nil {
		t.Fatalf("unable to fetch tx details: %v", err)
	}

	// Each of the transactions created above should be found with the
	// proper details populated.
	for _, txDetail := range txDetails {
		if _, ok := txids[txDetail.Hash]; !ok {
			continue
		}

		if txDetail.NumConfirmations != numBlocksMined {
			t.Fatalf("num confs incorrect, got %v expected %v",
				txDetail.NumConfirmations, numBlocksMined)
		}
		if txDetail.Value != outputAmt {
			t.Fatalf("tx value incorrect, got %v expected %v",
				txDetail.Value, outputAmt)
		}
		if !bytes.Equal(txDetail.BlockHash[:], blocks[0][:]) {
			t.Fatalf("block hash mismatch, got %v expected %v",
				txDetail.BlockHash, blocks[0])
		}

		delete(txids, txDetail.Hash)
	}
	if len(txids) != 0 {
		t.Fatalf("all transactions not found in details!")
	}

	// Next create a transaction paying to an output which isn't under the
	// wallet's control.
	b := txscript.NewScriptBuilder()
	b.AddOp(txscript.OP_0)
	outputScript, err := b.Script()
	if err != nil {
		t.Fatalf("unable to make output script: %v", err)
	}
	burnOutput := wire.NewTxOut(outputAmt, outputScript)
	burnTXID, err := wallet.SendOutputs([]*wire.TxOut{burnOutput})
	if err != nil {
		t.Fatalf("unable to create burn tx: %v", err)
	}
	burnBlock, err := miner.Node.Generate(1)
	if err != nil {
		t.Fatalf("unable to mine block: %v", err)
	}

	// Fetch the transaction details again, the new transaction should be
	// shown as debiting from the wallet's balance.
	time.Sleep(time.Second * 2)
	txDetails, err = wallet.ListTransactionDetails()
	if err != nil {
		t.Fatalf("unable to fetch tx details: %v", err)
	}
	var burnTxFound bool
	for _, txDetail := range txDetails {
		if !bytes.Equal(txDetail.Hash[:], burnTXID[:]) {
			continue
		}

		burnTxFound = true
		if txDetail.NumConfirmations != 1 {
			t.Fatalf("num confs incorrect, got %v expected %v",
//.........這裏部分代碼省略.........

func testTransactionSubscriptions(miner *rpctest.Harness, w *lnwallet.LightningWallet, t *testing.T) {
	t.Log("Running transaction subscriptions test")

	// First, check to see if this wallet meets the TransactionNotifier
	// interface, if not then we'll skip this test for this particular
	// implementation of the WalletController.
	txClient, err := w.SubscribeTransactions()
	if err != nil {
		t.Fatalf("unable to generate tx subscription: %v")
	}
	defer txClient.Cancel()

	const (
		outputAmt = btcutil.SatoshiPerBitcoin
		numTxns   = 3
	)
	unconfirmedNtfns := make(chan struct{})
	go func() {
		for i := 0; i < numTxns; i++ {
			txDetail := <-txClient.UnconfirmedTransactions()
			if txDetail.NumConfirmations != 0 {
				t.Fatalf("incorrect number of confs, expected %v got %v",
					0, txDetail.NumConfirmations)
			}
			if txDetail.Value != outputAmt {
				t.Fatalf("incorrect output amt, expected %v got %v",
					outputAmt, txDetail.Value)
			}
			if txDetail.BlockHash != nil {
				t.Fatalf("block hash should be nil, is instead %v",
					txDetail.BlockHash)
			}
		}

		close(unconfirmedNtfns)
	}()

	// Next, fetch a fresh address from the wallet, create 3 new outputs
	// with the pkScript.
	for i := 0; i < numTxns; i++ {
		addr, err := w.NewAddress(lnwallet.WitnessPubKey, false)
		if err != nil {
			t.Fatalf("unable to create new address: %v", err)
		}
		script, err := txscript.PayToAddrScript(addr)
		if err != nil {
			t.Fatalf("unable to create output script: %v", err)
		}

		output := &wire.TxOut{outputAmt, script}
		if _, err := miner.CoinbaseSpend([]*wire.TxOut{output}); err != nil {
			t.Fatalf("unable to send coinbase: %v", err)
		}
	}

	// We should receive a notification for all three transactions
	// generated above.
	select {
	case <-time.After(time.Second * 5):
		t.Fatalf("transactions not received after 3 seconds")
	case <-unconfirmedNtfns: // Fall through on successs
	}

	confirmedNtfns := make(chan struct{})
	go func() {
		for i := 0; i < numTxns; i++ {
			txDetail := <-txClient.ConfirmedTransactions()
			if txDetail.NumConfirmations != 1 {
				t.Fatalf("incorrect number of confs, expected %v got %v",
					0, txDetail.NumConfirmations)
			}
			if txDetail.Value != outputAmt {
				t.Fatalf("incorrect output amt, expected %v got %v",
					outputAmt, txDetail.Value)
			}
		}
		close(confirmedNtfns)
	}()

	// Next mine a single block, all the transactions generated above
	// should be included.
	if _, err := miner.Node.Generate(1); err != nil {
		t.Fatalf("unable to generate block: %v", err)
	}

	// We should receive a notification for all three transactions
	// since they should be mined in the next block.
	select {
	case <-time.After(time.Second * 5):
		t.Fatalf("transactions not received after 3 seconds")
	case <-confirmedNtfns: // Fall through on successs
	}
}