本文整理匯總了Golang中github.com/kildevaeld/projects/Godeps/_workspace/src/github.com/pebbe/zmq4.Socket.Send方法的典型用法代碼示例。如果您正苦於以下問題：Golang Socket.Send方法的具體用法？Golang Socket.Send怎麽用？Golang Socket.Send使用的例子？那麽, 這裏精選的方法代碼示例或許可以為您提供幫助。您也可以進一步了解該方法所在類github.com/kildevaeld/projects/Godeps/_workspace/src/github.com/pebbe/zmq4.Socket的用法示例。
在下文中一共展示了Socket.Send方法的3個代碼示例，這些例子默認根據受歡迎程度排序。您可以為喜歡或者感覺有用的代碼點讚，您的評價將有助於係統推薦出更棒的Golang代碼示例。
示例1: snapshots
func snapshots(socket *zmq.Socket, srv *clonesrv_t) (err error) {
msg, err := socket.RecvMessage(0)
if err != nil {
return
}
identity := msg[0]
// Request is in second frame of message
request := msg[1]
if request != "ICANHAZ?" {
err = errors.New("E: bad request, aborting")
return
}
subtree := msg[2]
// Send state socket to client
for _, kvmsg := range srv.kvmap {
if key, _ := kvmsg.GetKey(); strings.HasPrefix(key, subtree) {
socket.Send(identity, zmq.SNDMORE)
kvmsg.Send(socket)
}
}
// Now send END message with sequence number
log.Println("I: sending shapshot =", srv.sequence)
socket.Send(identity, zmq.SNDMORE)
kvmsg := kvmsg.NewKvmsg(srv.sequence)
kvmsg.SetKey("KTHXBAI")
kvmsg.SetBody(subtree)
kvmsg.Send(socket)
return
}示例2: Example_test_hwm
func Example_test_hwm() {
MAX_SENDS := 10000
BIND_FIRST := 1
CONNECT_FIRST := 2
test_defaults := func() int {
// Set up bind socket
bind_socket, err := zmq.NewSocket(zmq.PULL)
if checkErr(err) {
return 0
}
defer func() {
err := bind_socket.Close()
checkErr(err)
}()
err = bind_socket.Bind("inproc://a")
if checkErr(err) {
return 0
}
// Set up connect socket
connect_socket, err := zmq.NewSocket(zmq.PUSH)
if checkErr(err) {
return 0
}
defer func() {
err := connect_socket.Close()
checkErr(err)
}()
err = connect_socket.Connect("inproc://a")
if checkErr(err) {
return 0
}
// Send until we block
send_count := 0
for send_count < MAX_SENDS {
_, err := connect_socket.Send("", zmq.DONTWAIT)
if err != nil {
break
}
send_count++
}
// Now receive all sent messages
recv_count := 0
for {
_, err := bind_socket.Recv(zmq.DONTWAIT)
if err != nil {
break
}
recv_count++
}
fmt.Println("send_count == recv_count:", send_count == recv_count)
return send_count
}
count_msg := func(send_hwm, recv_hwm, testType int) int {
var bind_socket, connect_socket *zmq.Socket
var err error
if testType == BIND_FIRST {
// Set up bind socket
bind_socket, err = zmq.NewSocket(zmq.PULL)
if checkErr(err) {
return 0
}
defer func() {
err := bind_socket.Close()
checkErr(err)
}()
err = bind_socket.SetRcvhwm(recv_hwm)
if checkErr(err) {
return 0
}
err = bind_socket.Bind("inproc://a")
if checkErr(err) {
return 0
}
// Set up connect socket
connect_socket, err = zmq.NewSocket(zmq.PUSH)
if checkErr(err) {
return 0
}
defer func() {
err := connect_socket.Close()
checkErr(err)
}()
err = connect_socket.SetSndhwm(send_hwm)
if checkErr(err) {
//.........這裏部分代碼省略.........
示例3: bounce
func bounce(server, client *zmq.Socket, willfail bool) {
content := "12345678ABCDEFGH12345678abcdefgh"
// Send message from client to server
rc, err := client.Send(content, zmq.SNDMORE|zmq.DONTWAIT)
if checkErr0(err, 1) {
return
}
if rc != 32 {
checkErr0(errors.New("rc != 32"), 2)
}
rc, err = client.Send(content, zmq.DONTWAIT)
if checkErr0(err, 3) {
return
}
if rc != 32 {
checkErr0(errors.New("rc != 32"), 4)
}
// Receive message at server side
msg, err := server.Recv(0)
if checkErr0(e(err, willfail), 5) {
return
}
// Check that message is still the same
if msg != content {
checkErr0(errors.New(fmt.Sprintf("%q != %q", msg, content)), 6)
}
rcvmore, err := server.GetRcvmore()
if checkErr0(err, 7) {
return
}
if !rcvmore {
checkErr0(errors.New(fmt.Sprint("rcvmore ==", rcvmore)), 8)
return
}
// Receive message at server side
msg, err = server.Recv(0)
if checkErr0(err, 9) {
return
}
// Check that message is still the same
if msg != content {
checkErr0(errors.New(fmt.Sprintf("%q != %q", msg, content)), 10)
}
rcvmore, err = server.GetRcvmore()
if checkErr0(err, 11) {
return
}
if rcvmore {
checkErr0(errors.New(fmt.Sprint("rcvmore == ", rcvmore)), 12)
return
}
// The same, from server back to client
// Send message from server to client
rc, err = server.Send(content, zmq.SNDMORE)
if checkErr0(err, 13) {
return
}
if rc != 32 {
checkErr0(errors.New("rc != 32"), 14)
}
rc, err = server.Send(content, 0)
if checkErr0(err, 15) {
return
}
if rc != 32 {
checkErr0(errors.New("rc != 32"), 16)
}
// Receive message at client side
msg, err = client.Recv(0)
if checkErr0(err, 17) {
return
}
// Check that message is still the same
if msg != content {
checkErr0(errors.New(fmt.Sprintf("%q != %q", msg, content)), 18)
}
rcvmore, err = client.GetRcvmore()
if checkErr0(err, 19) {
return
}
if !rcvmore {
checkErr0(errors.New(fmt.Sprint("rcvmore ==", rcvmore)), 20)
return
}
//.........這裏部分代碼省略.........