Golang yamux.DefaultConfig函數代碼示例

func TestProvider_Disconnect(t *testing.T) {
	config := testProviderConfig()
	p, err := NewProvider(config)
	if err != nil {
		t.Fatalf("err: %v", err)
	}
	defer p.Shutdown()

	// Setup RPC client
	a, b := testConn(t)
	client, _ := yamux.Client(a, yamux.DefaultConfig())
	server, _ := yamux.Server(b, yamux.DefaultConfig())
	go p.handleSession(client, make(chan struct{}))

	stream, _ := server.Open()
	cc := msgpackrpc.NewCodec(false, false, stream)

	// Make the connect rpc
	args := &DisconnectRequest{
		NoRetry: true,
		Backoff: 300 * time.Second,
	}
	resp := &DisconnectResponse{}
	err = msgpackrpc.CallWithCodec(cc, "Client.Disconnect", args, resp)
	if err != nil {
		t.Fatalf("err: %v", err)
	}

	p.backoffLock.Lock()
	defer p.backoffLock.Unlock()

	if p.backoff != 300*time.Second {
		t.Fatalf("bad: %v", p.backoff)
	}
	if !p.noRetry {
		t.Fatalf("bad")
	}

	p.sessionLock.Lock()
	defer p.sessionLock.Unlock()

	if p.sessionID != "" {
		t.Fatalf("Bad: %v", p.sessionID)
	}
	if p.sessionAuth {
		t.Fatalf("Bad: %v", p.sessionAuth)
	}
}

func TestProvider_Connect(t *testing.T) {
	config := testProviderConfig()
	config.Service.Capabilities["foo"] = 1
	config.Handlers["foo"] = fooCapability(t)
	p, err := NewProvider(config)
	if err != nil {
		t.Fatalf("err: %v", err)
	}
	defer p.Shutdown()

	// Setup RPC client
	a, b := testConn(t)
	client, _ := yamux.Client(a, yamux.DefaultConfig())
	server, _ := yamux.Server(b, yamux.DefaultConfig())
	go p.handleSession(client, make(chan struct{}))

	stream, _ := server.Open()
	cc := msgpackrpc.NewCodec(false, false, stream)

	// Make the connect rpc
	args := &ConnectRequest{
		Capability: "foo",
		Meta: map[string]string{
			"zip": "zap",
		},
	}
	resp := &ConnectResponse{}
	err = msgpackrpc.CallWithCodec(cc, "Client.Connect", args, resp)
	if err != nil {
		t.Fatalf("err: %v", err)
	}

	// Should be successful!
	if !resp.Success {
		t.Fatalf("bad")
	}

	// At this point, we should be connected
	out := make([]byte, 9)
	n, err := stream.Read(out)
	if err != nil {
		t.Fatalf("err: %v %d", err, n)
	}

	if string(out) != "foobarbaz" {
		t.Fatalf("bad: %s", out)
	}
}

// NewClient creates a new tunnel that is established between the serverAddr
// and localAddr. It exits if it can't create a new control connection to the
// server. If localAddr is empty client will always try to proxy to a local
// port.
func NewClient(cfg *ClientConfig) (*Client, error) {
	yamuxConfig := yamux.DefaultConfig()
	if cfg.YamuxConfig != nil {
		yamuxConfig = cfg.YamuxConfig
	}

	log := newLogger("tunnel-client", cfg.Debug)
	if cfg.Log != nil {
		log = cfg.Log
	}

	if err := cfg.verify(); err != nil {
		return nil, err
	}

	forever := backoff.NewExponentialBackOff()
	forever.MaxElapsedTime = 365 * 24 * time.Hour // 1 year

	client := &Client{
		config:        cfg,
		log:           log,
		yamuxConfig:   yamuxConfig,
		redialBackoff: forever,
		startNotify:   make(chan bool, 1),
	}

	return client, nil
}

// NewServer creates a new Server. The defaults are used if config is nil.
func NewServer(cfg *ServerConfig) (*Server, error) {
	yamuxConfig := yamux.DefaultConfig()
	if cfg.YamuxConfig != nil {
		if err := yamux.VerifyConfig(cfg.YamuxConfig); err != nil {
			return nil, err
		}

		yamuxConfig = cfg.YamuxConfig
	}

	log := newLogger("tunnel-server", cfg.Debug)
	if cfg.Log != nil {
		log = cfg.Log
	}

	return &Server{
		pending:      make(map[string]chan net.Conn),
		sessions:     make(map[string]*yamux.Session),
		onDisconnect: make(map[string]func() error),
		virtualHosts: newVirtualHosts(),
		controls:     newControls(),
		yamuxConfig:  yamuxConfig,
		log:          log,
	}, nil
}

// NewClient creates a new tunnel that is established between the serverAddr
// and localAddr. It exits if it can't create a new control connection to the
// server. If localAddr is empty client will always try to proxy to a local
// port.
func NewClient(cfg *ClientConfig) (*Client, error) {
	yamuxConfig := yamux.DefaultConfig()
	if cfg.YamuxConfig != nil {
		yamuxConfig = cfg.YamuxConfig
	}

	log := newLogger("tunnel-client", cfg.Debug)
	if cfg.Log != nil {
		log = cfg.Log
	}

	if err := cfg.verify(); err != nil {
		return nil, err
	}

	client := &Client{
		config:        cfg,
		log:           log,
		yamuxConfig:   yamuxConfig,
		redialBackoff: cfg.Backoff,
		startNotify:   make(chan bool, 1),
	}

	if client.redialBackoff == nil {
		client.redialBackoff = newForeverBackoff()
	}

	return client, nil
}

func testHandshake(t *testing.T, list net.Listener, expect *HandshakeRequest) {
	client, err := list.Accept()
	if err != nil {
		t.Fatalf("err: %v", err)
	}
	defer client.Close()

	preamble := make([]byte, len(clientPreamble))
	n, err := client.Read(preamble)
	if err != nil || n != len(preamble) {
		t.Fatalf("err: %v", err)
	}

	server, _ := yamux.Server(client, yamux.DefaultConfig())
	conn, err := server.Accept()
	if err != nil {
		t.Fatalf("err: %v", err)
	}
	defer conn.Close()
	rpcCodec := msgpackrpc.NewCodec(true, true, conn)

	rpcSrv := rpc.NewServer()
	rpcSrv.RegisterName("Session", &TestHandshake{t, expect})

	err = rpcSrv.ServeRequest(rpcCodec)
	if err != nil {
		t.Fatalf("err: %v", err)
	}
}

func startTLSServer(config *Config) (net.Conn, chan error) {
	errc := make(chan error, 1)

	tlsConfigServer, err := config.IncomingTLSConfig()
	if err != nil {
		errc <- err
		return nil, errc
	}

	client, server := net.Pipe()

	// Use yamux to buffer the reads, otherwise it's easy to deadlock
	muxConf := yamux.DefaultConfig()
	serverSession, _ := yamux.Server(server, muxConf)
	clientSession, _ := yamux.Client(client, muxConf)
	clientConn, _ := clientSession.Open()
	serverConn, _ := serverSession.Accept()

	go func() {
		tlsServer := tls.Server(serverConn, tlsConfigServer)
		if err := tlsServer.Handshake(); err != nil {
			errc <- err
		}
		close(errc)
		// Because net.Pipe() is unbuffered, if both sides
		// Close() simultaneously, we will deadlock as they
		// both send an alert and then block. So we make the
		// server read any data from the client until error or
		// EOF, which will allow the client to Close(), and
		// *then* we Close() the server.
		io.Copy(ioutil.Discard, tlsServer)
		tlsServer.Close()
	}()
	return clientConn, errc
}

// getNewConn is used to return a new connection
func (p *ConnPool) getNewConn(addr string, timeout time.Duration) (*Conn, error) {
	// Try to dial the conn
	conn, err := tls.DialWithDialer(&net.Dialer{Timeout: timeout}, "tcp", addr, p.config)
	if err != nil {
		return nil, err
	}

	// Setup the logger
	conf := yamux.DefaultConfig()
	conf.LogOutput = p.logOutput

	// Create a multiplexed session
	session, err := yamux.Client(conn, conf)
	if err != nil {
		conn.Close()
		return nil, err
	}

	// Wrap the connection
	c := &Conn{
		addr:     addr,
		session:  session,
		lastUsed: time.Now(),
		pool:     p,
	}
	return c, nil
}

// getNewConn is used to return a new connection
func (p *ConnPool) getNewConn(region string, addr net.Addr, version int) (*Conn, error) {
	// Try to dial the conn
	conn, err := net.DialTimeout("tcp", addr.String(), 10*time.Second)
	if err != nil {
		return nil, err
	}

	// Cast to TCPConn
	if tcp, ok := conn.(*net.TCPConn); ok {
		tcp.SetKeepAlive(true)
		tcp.SetNoDelay(true)
	}

	// Check if TLS is enabled
	if p.tlsWrap != nil {
		// Switch the connection into TLS mode
		if _, err := conn.Write([]byte{byte(rpcTLS)}); err != nil {
			conn.Close()
			return nil, err
		}

		// Wrap the connection in a TLS client
		tlsConn, err := p.tlsWrap(region, conn)
		if err != nil {
			conn.Close()
			return nil, err
		}
		conn = tlsConn
	}

	// Write the multiplex byte to set the mode
	if _, err := conn.Write([]byte{byte(rpcMultiplex)}); err != nil {
		conn.Close()
		return nil, err
	}

	// Setup the logger
	conf := yamux.DefaultConfig()
	conf.LogOutput = p.logOutput

	// Create a multiplexed session
	session, err := yamux.Client(conn, conf)
	if err != nil {
		conn.Close()
		return nil, err
	}

	// Wrap the connection
	c := &Conn{
		refCount: 1,
		addr:     addr,
		session:  session,
		clients:  list.New(),
		lastUsed: time.Now(),
		version:  version,
		pool:     p,
	}
	return c, nil
}

func TestProvider_Flash(t *testing.T) {
	config := testProviderConfig()
	buf := bytes.NewBuffer(nil)
	config.LogOutput = buf
	p, err := NewProvider(config)
	if err != nil {
		t.Fatalf("err: %v", err)
	}
	defer p.Shutdown()

	// Setup RPC client
	a, b := testConn(t)
	client, _ := yamux.Client(a, yamux.DefaultConfig())
	server, _ := yamux.Server(b, yamux.DefaultConfig())
	go p.handleSession(client, make(chan struct{}))

	stream, _ := server.Open()
	cc := msgpackrpc.NewCodec(false, false, stream)

	// Make the connect rpc
	args := &FlashRequest{
		Severity: "INFO",
		Message:  "TESTING",
	}
	resp := &FlashResponse{}
	err = msgpackrpc.CallWithCodec(cc, "Client.Flash", args, resp)
	if err != nil {
		t.Fatalf("err: %v", err)
	}

	// Wait until we are disconnected
	start := time.Now()
	for time.Now().Sub(start) < time.Second {
		if bytes.Contains(buf.Bytes(), []byte("TESTING")) {
			break
		}
		time.Sleep(10 * time.Millisecond)
	}
	if !bytes.Contains(buf.Bytes(), []byte("TESTING")) {
		t.Fatalf("missing: %s", buf)
	}
}

func (y *yamuxer) handleConn(g grim.GrimReaper, conn net.Conn) {
	defer g.Wait()

	conf := yamux.DefaultConfig()
	conf.LogOutput = y.logOutput
	session, _ := yamux.Server(conn, conf)

	streamCh := make(chan net.Conn)
	g.SpawnFunc(processStreams(g.New(), conn, streamCh, y.dispatcher))
	g.SpawnFunc(acceptStreams(y.logger, session, streamCh))
}

// handleMultiplex handles a multiplexed connection.
func (r *rpcServer) handleMultiplex(conn net.Conn) {
	defer conn.Close()
	conf := yamux.DefaultConfig()
	conf.LogOutput = r.n.config.LogOutput
	server, _ := yamux.Server(conn, conf)
	for {
		sub, err := server.Accept()
		if err != nil {
			if err != io.EOF {
				r.n.logger.Printf("[ERR] onecache.rpc: multiplex conn accept failed: %v", err)
			}
			return
		}
		go r.handleConn(sub)
	}
}

// handleMultiplex is used to multiplex a single incoming connection
// using the Yamux multiplexer
func (s *Server) handleMultiplex(conn net.Conn) {
	defer conn.Close()
	conf := yamux.DefaultConfig()
	conf.LogOutput = s.config.LogOutput
	server, _ := yamux.Server(conn, conf)
	for {
		sub, err := server.Accept()
		if err != nil {
			if err != io.EOF {
				s.logger.Printf("[ERR] nomad.rpc: multiplex conn accept failed: %v", err)
			}
			return
		}
		go s.handleNomadConn(sub)
	}
}

func (li *Listener) getSession() (*yamux.Session, error) {
	li.mu.Lock()
	defer li.mu.Unlock()

	if li.session != nil {
		return li.session, nil
	}

	// connect to the socket master
	conn, err := net.Dial("tcp", li.socketMasterAddress)
	if err != nil {
		return nil, err
	}

	// bind to a port
	err = protocol.WriteHandshakeRequest(conn, protocol.HandshakeRequest{
		SocketDefinition: li.socketDefinition,
	})
	if err != nil {
		conn.Close()
		return nil, err
	}

	// see if that worked
	res, err := protocol.ReadHandshakeResponse(conn)
	if err != nil {
		conn.Close()
		return nil, err
	}
	if res.Status != "OK" {
		conn.Close()
		return nil, fmt.Errorf("%s", res.Status)
	}

	// start a new session
	session, err := yamux.Server(conn, yamux.DefaultConfig())
	if err != nil {
		conn.Close()
		return nil, err
	}

	return session, nil
}

// getNewConn is used to return a new connection
func (p *connPool) getNewConn(addr net.Addr) (*conn, error) {
	// Try to dial the conn
	con, err := net.DialTimeout("tcp", addr.String(), 10*time.Second)
	if err != nil {
		return nil, err
	}

	// Cast to TCPConn
	if tcp, ok := con.(*net.TCPConn); ok {
		tcp.SetKeepAlive(true)
		tcp.SetNoDelay(true)
	}

	// Write the multiplex byte to set the mode
	if _, err := con.Write([]byte{byte(rpcInternal)}); err != nil {
		con.Close()
		return nil, err
	}

	// Setup the logger
	conf := yamux.DefaultConfig()
	conf.LogOutput = p.logOutput

	// Create a multiplexed session
	session, err := yamux.Client(con, conf)
	if err != nil {
		con.Close()
		return nil, err
	}

	// Wrap the connection
	c := &conn{
		refCount: 1,
		addr:     addr,
		session:  session,
		clients:  list.New(),
		lastUsed: time.Now(),
		pool:     p,
	}
	return c, nil
}