本文整理匯總了Golang中github.com/emicklei/go-restful/log.Printf函數的典型用法代碼示例。如果您正苦於以下問題:Golang Printf函數的具體用法?Golang Printf怎麽用?Golang Printf使用的例子?那麽, 這裏精選的函數代碼示例或許可以為您提供幫助。
在下文中一共展示了Printf函數的7個代碼示例,這些例子默認根據受歡迎程度排序。您可以為喜歡或者感覺有用的代碼點讚,您的評價將有助於係統推薦出更棒的Golang代碼示例。
示例1: Build
// Build creates a new Route using the specification details collected by the RouteBuilder
func (b *RouteBuilder) Build() Route {
pathExpr, err := newPathExpression(b.currentPath)
if err != nil {
log.Printf("[restful] Invalid path:%s because:%v", b.currentPath, err)
os.Exit(1)
}
if b.function == nil {
log.Printf("[restful] No function specified for route:" + b.currentPath)
os.Exit(1)
}
operationName := b.operation
if len(operationName) == 0 && b.function != nil {
// extract from definition
operationName = nameOfFunction(b.function)
}
route := Route{
Method: b.httpMethod,
Path: concatPath(b.rootPath, b.currentPath),
Produces: b.produces,
Consumes: b.consumes,
Function: b.function,
Filters: b.filters,
relativePath: b.currentPath,
pathExpr: pathExpr,
Doc: b.doc,
Notes: b.notes,
Operation: operationName,
ParameterDocs: b.parameters,
ResponseErrors: b.errorMap,
ReadSample: b.readSample,
WriteSample: b.writeSample}
route.postBuild()
return route
}
示例2: compilePathExpression
// compilePathExpression ensures that the path is compiled into a RegEx for those routers that need it.
func (w *WebService) compilePathExpression() {
compiled, err := newPathExpression(w.rootPath)
if err != nil {
log.Printf("[restful] invalid path:%s because:%v", w.rootPath, err)
os.Exit(1)
}
w.pathExpr = compiled
}
示例3: compilePathExpression
// compilePathExpression ensures that the path is compiled into a RegEx for those routers that need it.
func (w *WebService) compilePathExpression() {
if len(w.rootPath) == 0 {
w.Path("/") // lazy initialize path
}
compiled, err := newPathExpression(w.rootPath)
if err != nil {
log.Printf("[restful] invalid path:%s because:%v", w.rootPath, err)
os.Exit(1)
}
w.pathExpr = compiled
}
示例4: Add
// Add a WebService to the Container. It will detect duplicate root paths and panic in that case.
func (c *Container) Add(service *WebService) *Container {
c.webServicesLock.Lock()
defer c.webServicesLock.Unlock()
// If registered on root then no additional specific mapping is needed
if !c.isRegisteredOnRoot {
pattern := c.fixedPrefixPath(service.RootPath())
// check if root path registration is needed
if "/" == pattern || "" == pattern {
c.ServeMux.HandleFunc("/", c.dispatch)
c.isRegisteredOnRoot = true
} else {
// detect if registration already exists
alreadyMapped := false
for _, each := range c.webServices {
if each.RootPath() == service.RootPath() {
alreadyMapped = true
break
}
}
if !alreadyMapped {
c.ServeMux.HandleFunc(pattern, c.dispatch)
if !strings.HasSuffix(pattern, "/") {
c.ServeMux.HandleFunc(pattern+"/", c.dispatch)
}
}
}
}
// cannot have duplicate root paths
for _, each := range c.webServices {
if each.RootPath() == service.RootPath() {
log.Printf("[restful] WebService with duplicate root path detected:['%v']", each)
os.Exit(1)
}
}
// if rootPath was not set then lazy initialize it
if len(service.rootPath) == 0 {
service.Path("/")
}
c.webServices = append(c.webServices, service)
return c
}
示例5: Add
// Add a WebService to the Container. It will detect duplicate root paths and exit in that case.
func (c *Container) Add(service *WebService) *Container {
c.webServicesLock.Lock()
defer c.webServicesLock.Unlock()
// if rootPath was not set then lazy initialize it
if len(service.rootPath) == 0 {
service.Path("/")
}
// cannot have duplicate root paths
for _, each := range c.webServices {
if each.RootPath() == service.RootPath() {
log.Printf("[restful] WebService with duplicate root path detected:['%v']", each)
os.Exit(1)
}
}
// If not registered on root then add specific mapping
if !c.isRegisteredOnRoot {
c.isRegisteredOnRoot = c.addHandler(service, c.ServeMux)
}
c.webServices = append(c.webServices, service)
return c
}
示例6: Remove
func (c *Container) Remove(ws *WebService) error {
if c.ServeMux == http.DefaultServeMux {
errMsg := fmt.Sprintf("[restful] cannot remove a WebService from a Container using the DefaultServeMux: ['%v']", ws)
log.Printf(errMsg)
return errors.New(errMsg)
}
c.webServicesLock.Lock()
defer c.webServicesLock.Unlock()
// build a new ServeMux and re-register all WebServices
newServeMux := http.NewServeMux()
newServices := []*WebService{}
newIsRegisteredOnRoot := false
for _, each := range c.webServices {
if each.rootPath != ws.rootPath {
// If not registered on root then add specific mapping
if !newIsRegisteredOnRoot {
newIsRegisteredOnRoot = c.addHandler(each, newServeMux)
}
newServices = append(newServices, each)
}
}
c.webServices, c.ServeMux, c.isRegisteredOnRoot = newServices, newServeMux, newIsRegisteredOnRoot
return nil
}
示例7: InstallSwaggerService
sws.apiDeclarationMap.Put(each.RootPath(), sws.composeDeclaration(each, each.RootPath()))
}
}
}
// if specified then call the PostBuilderHandler
if config.PostBuildHandler != nil {
config.PostBuildHandler(sws.apiDeclarationMap)
}
return sws
}
// LogInfo is the function that is called when this package needs to log. It defaults to log.Printf
var LogInfo = func(format string, v ...interface{}) {
// use the restful package-wide logger
log.Printf(format, v...)
}
// InstallSwaggerService add the WebService that provides the API documentation of all services
// conform the Swagger documentation specifcation. (https://github.com/wordnik/swagger-core/wiki).
func InstallSwaggerService(aSwaggerConfig Config) {
RegisterSwaggerService(aSwaggerConfig, restful.DefaultContainer)
}
// RegisterSwaggerService add the WebService that provides the API documentation of all services
// conform the Swagger documentation specifcation. (https://github.com/wordnik/swagger-core/wiki).
func RegisterSwaggerService(config Config, wsContainer *restful.Container) {
sws := newSwaggerService(config)
ws := new(restful.WebService)
ws.Path(config.ApiPath)
ws.Produces(restful.MIME_JSON)