當前位置: 首頁>>代碼示例>>Golang>>正文


Golang NetlinkRequest.Execute方法代碼示例

本文整理匯總了Golang中github.com/currantlabs/netlink/nl.NetlinkRequest.Execute方法的典型用法代碼示例。如果您正苦於以下問題:Golang NetlinkRequest.Execute方法的具體用法?Golang NetlinkRequest.Execute怎麽用?Golang NetlinkRequest.Execute使用的例子?那麽, 這裏精選的方法代碼示例或許可以為您提供幫助。您也可以進一步了解該方法所在github.com/currantlabs/netlink/nl.NetlinkRequest的用法示例。


在下文中一共展示了NetlinkRequest.Execute方法的5個代碼示例,這些例子默認根據受歡迎程度排序。您可以為喜歡或者感覺有用的代碼點讚,您的評價將有助於係統推薦出更棒的Golang代碼示例。

示例1: neighHandle

func neighHandle(neigh *Neigh, req *nl.NetlinkRequest) error {
	var family int
	if neigh.Family > 0 {
		family = neigh.Family
	} else {
		family = nl.GetIPFamily(neigh.IP)
	}

	msg := Ndmsg{
		Family: uint8(family),
		Index:  uint32(neigh.LinkIndex),
		State:  uint16(neigh.State),
		Type:   uint8(neigh.Type),
		Flags:  uint8(neigh.Flags),
	}
	req.AddData(&msg)

	ipData := neigh.IP.To4()
	if ipData == nil {
		ipData = neigh.IP.To16()
	}

	dstData := nl.NewRtAttr(NDA_DST, ipData)
	req.AddData(dstData)

	hwData := nl.NewRtAttr(NDA_LLADDR, []byte(neigh.HardwareAddr))
	req.AddData(hwData)

	_, err := req.Execute(syscall.NETLINK_ROUTE, 0)
	return err
}
開發者ID:currantlabs,項目名稱:netlink,代碼行數:31,代碼來源:neigh_linux.go

示例2: addrHandle

func addrHandle(link Link, addr *Addr, req *nl.NetlinkRequest) error {
	base := link.Attrs()
	if addr.Label != "" && !strings.HasPrefix(addr.Label, base.Name) {
		return fmt.Errorf("label must begin with interface name")
	}
	ensureIndex(base)

	family := nl.GetIPFamily(addr.IP)

	msg := nl.NewIfAddrmsg(family)
	msg.Index = uint32(base.Index)
	msg.Scope = uint8(addr.Scope)
	prefixlen, _ := addr.Mask.Size()
	msg.Prefixlen = uint8(prefixlen)
	req.AddData(msg)

	var addrData []byte
	if family == FAMILY_V4 {
		addrData = addr.IP.To4()
	} else {
		addrData = addr.IP.To16()
	}

	localData := nl.NewRtAttr(syscall.IFA_LOCAL, addrData)
	req.AddData(localData)

	addressData := nl.NewRtAttr(syscall.IFA_ADDRESS, addrData)
	req.AddData(addressData)

	if addr.Flags != 0 {
		b := make([]byte, 4)
		native.PutUint32(b, uint32(addr.Flags))
		flagsData := nl.NewRtAttr(IFA_FLAGS, b)
		req.AddData(flagsData)
	}

	if addr.Label != "" {
		labelData := nl.NewRtAttr(syscall.IFA_LABEL, nl.ZeroTerminated(addr.Label))
		req.AddData(labelData)
	}

	_, err := req.Execute(syscall.NETLINK_ROUTE, 0)
	return err
}
開發者ID:currantlabs,項目名稱:netlink,代碼行數:44,代碼來源:addr_linux.go

示例3: execGetLink

func execGetLink(req *nl.NetlinkRequest) (Link, error) {
	msgs, err := req.Execute(syscall.NETLINK_ROUTE, 0)
	if err != nil {
		if errno, ok := err.(syscall.Errno); ok {
			if errno == syscall.ENODEV {
				return nil, fmt.Errorf("Link not found")
			}
		}
		return nil, err
	}

	switch {
	case len(msgs) == 0:
		return nil, fmt.Errorf("Link not found")

	case len(msgs) == 1:
		return linkDeserialize(msgs[0])

	default:
		return nil, fmt.Errorf("More than one link found")
	}
}
開發者ID:currantlabs,項目名稱:netlink,代碼行數:22,代碼來源:link_linux.go

示例4: ruleHandle

func ruleHandle(rule *Rule, req *nl.NetlinkRequest) error {
	msg := nl.NewRtMsg()
	msg.Family = syscall.AF_INET
	var dstFamily uint8

	var rtAttrs []*nl.RtAttr
	if rule.Dst != nil && rule.Dst.IP != nil {
		dstLen, _ := rule.Dst.Mask.Size()
		msg.Dst_len = uint8(dstLen)
		msg.Family = uint8(nl.GetIPFamily(rule.Dst.IP))
		dstFamily = msg.Family
		var dstData []byte
		if msg.Family == syscall.AF_INET {
			dstData = rule.Dst.IP.To4()
		} else {
			dstData = rule.Dst.IP.To16()
		}
		rtAttrs = append(rtAttrs, nl.NewRtAttr(syscall.RTA_DST, dstData))
	}

	if rule.Src != nil && rule.Src.IP != nil {
		msg.Family = uint8(nl.GetIPFamily(rule.Src.IP))
		if dstFamily != 0 && dstFamily != msg.Family {
			return fmt.Errorf("source and destination ip are not the same IP family")
		}
		srcLen, _ := rule.Src.Mask.Size()
		msg.Src_len = uint8(srcLen)
		var srcData []byte
		if msg.Family == syscall.AF_INET {
			srcData = rule.Src.IP.To4()
		} else {
			srcData = rule.Src.IP.To16()
		}
		rtAttrs = append(rtAttrs, nl.NewRtAttr(syscall.RTA_SRC, srcData))
	}

	if rule.Table >= 0 {
		msg.Table = uint8(rule.Table)
		if rule.Table >= 256 {
			msg.Table = syscall.RT_TABLE_UNSPEC
		}
	}

	req.AddData(msg)
	for i := range rtAttrs {
		req.AddData(rtAttrs[i])
	}

	var (
		b      = make([]byte, 4)
		native = nl.NativeEndian()
	)

	if rule.Priority >= 0 {
		native.PutUint32(b, uint32(rule.Priority))
		req.AddData(nl.NewRtAttr(nl.FRA_PRIORITY, b))
	}
	if rule.Mark >= 0 {
		native.PutUint32(b, uint32(rule.Mark))
		req.AddData(nl.NewRtAttr(nl.FRA_FWMARK, b))
	}
	if rule.Mask >= 0 {
		native.PutUint32(b, uint32(rule.Mask))
		req.AddData(nl.NewRtAttr(nl.FRA_FWMASK, b))
	}
	if rule.Flow >= 0 {
		native.PutUint32(b, uint32(rule.Flow))
		req.AddData(nl.NewRtAttr(nl.FRA_FLOW, b))
	}
	if rule.TunID > 0 {
		native.PutUint32(b, uint32(rule.TunID))
		req.AddData(nl.NewRtAttr(nl.FRA_TUN_ID, b))
	}
	if rule.Table >= 256 {
		native.PutUint32(b, uint32(rule.Table))
		req.AddData(nl.NewRtAttr(nl.FRA_TABLE, b))
	}
	if msg.Table > 0 {
		if rule.SuppressPrefixlen >= 0 {
			native.PutUint32(b, uint32(rule.SuppressPrefixlen))
			req.AddData(nl.NewRtAttr(nl.FRA_SUPPRESS_PREFIXLEN, b))
		}
		if rule.SuppressIfgroup >= 0 {
			native.PutUint32(b, uint32(rule.SuppressIfgroup))
			req.AddData(nl.NewRtAttr(nl.FRA_SUPPRESS_IFGROUP, b))
		}
	}
	if rule.IifName != "" {
		req.AddData(nl.NewRtAttr(nl.FRA_IIFNAME, []byte(rule.IifName)))
	}
	if rule.OifName != "" {
		req.AddData(nl.NewRtAttr(nl.FRA_OIFNAME, []byte(rule.OifName)))
	}
	if rule.Goto >= 0 {
		msg.Type = nl.FR_ACT_NOP
		native.PutUint32(b, uint32(rule.Goto))
		req.AddData(nl.NewRtAttr(nl.FRA_GOTO, b))
	}

	_, err := req.Execute(syscall.NETLINK_ROUTE, 0)
//.........這裏部分代碼省略.........
開發者ID:currantlabs,項目名稱:netlink,代碼行數:101,代碼來源:rule_linux.go

示例5: routeHandle

func routeHandle(route *Route, req *nl.NetlinkRequest, msg *nl.RtMsg) error {
	if (route.Dst == nil || route.Dst.IP == nil) && route.Src == nil && route.Gw == nil {
		return fmt.Errorf("one of Dst.IP, Src, or Gw must not be nil")
	}

	family := -1
	var rtAttrs []*nl.RtAttr

	if route.Dst != nil && route.Dst.IP != nil {
		dstLen, _ := route.Dst.Mask.Size()
		msg.Dst_len = uint8(dstLen)
		dstFamily := nl.GetIPFamily(route.Dst.IP)
		family = dstFamily
		var dstData []byte
		if dstFamily == FAMILY_V4 {
			dstData = route.Dst.IP.To4()
		} else {
			dstData = route.Dst.IP.To16()
		}
		rtAttrs = append(rtAttrs, nl.NewRtAttr(syscall.RTA_DST, dstData))
	}

	if route.Src != nil {
		srcFamily := nl.GetIPFamily(route.Src)
		if family != -1 && family != srcFamily {
			return fmt.Errorf("source and destination ip are not the same IP family")
		}
		family = srcFamily
		var srcData []byte
		if srcFamily == FAMILY_V4 {
			srcData = route.Src.To4()
		} else {
			srcData = route.Src.To16()
		}
		// The commonly used src ip for routes is actually PREFSRC
		rtAttrs = append(rtAttrs, nl.NewRtAttr(syscall.RTA_PREFSRC, srcData))
	}

	if route.Gw != nil {
		gwFamily := nl.GetIPFamily(route.Gw)
		if family != -1 && family != gwFamily {
			return fmt.Errorf("gateway, source, and destination ip are not the same IP family")
		}
		family = gwFamily
		var gwData []byte
		if gwFamily == FAMILY_V4 {
			gwData = route.Gw.To4()
		} else {
			gwData = route.Gw.To16()
		}
		rtAttrs = append(rtAttrs, nl.NewRtAttr(syscall.RTA_GATEWAY, gwData))
	}

	if route.Table > 0 {
		if route.Table >= 256 {
			msg.Table = syscall.RT_TABLE_UNSPEC
			b := make([]byte, 4)
			native.PutUint32(b, uint32(route.Table))
			rtAttrs = append(rtAttrs, nl.NewRtAttr(syscall.RTA_TABLE, b))
		} else {
			msg.Table = uint8(route.Table)
		}
	}

	if route.Priority > 0 {
		b := make([]byte, 4)
		native.PutUint32(b, uint32(route.Priority))
		rtAttrs = append(rtAttrs, nl.NewRtAttr(syscall.RTA_PRIORITY, b))
	}
	if route.Tos > 0 {
		msg.Tos = uint8(route.Tos)
	}
	if route.Protocol > 0 {
		msg.Protocol = uint8(route.Protocol)
	}
	if route.Type > 0 {
		msg.Type = uint8(route.Type)
	}

	msg.Scope = uint8(route.Scope)
	msg.Family = uint8(family)
	req.AddData(msg)
	for _, attr := range rtAttrs {
		req.AddData(attr)
	}

	var (
		b      = make([]byte, 4)
		native = nl.NativeEndian()
	)
	native.PutUint32(b, uint32(route.LinkIndex))

	req.AddData(nl.NewRtAttr(syscall.RTA_OIF, b))

	_, err := req.Execute(syscall.NETLINK_ROUTE, 0)
	return err
}
開發者ID:currantlabs,項目名稱:netlink,代碼行數:97,代碼來源:route_linux.go


注:本文中的github.com/currantlabs/netlink/nl.NetlinkRequest.Execute方法示例由純淨天空整理自Github/MSDocs等開源代碼及文檔管理平台,相關代碼片段篩選自各路編程大神貢獻的開源項目,源碼版權歸原作者所有,傳播和使用請參考對應項目的License;未經允許,請勿轉載。