本文整理匯總了Golang中github.com/coreos/etcd/pkg/runtime.FDLimit函數的典型用法代碼示例。如果您正苦於以下問題：Golang FDLimit函數的具體用法？Golang FDLimit怎麽用？Golang FDLimit使用的例子？那麽, 這裏精選的函數代碼示例或許可以為您提供幫助。
在下文中一共展示了FDLimit函數的7個代碼示例，這些例子默認根據受歡迎程度排序。您可以為喜歡或者感覺有用的代碼點讚，您的評價將有助於係統推薦出更棒的Golang代碼示例。
示例1: monitorFileDescriptor
func monitorFileDescriptor(done <-chan struct{}) {
ticker := time.NewTicker(5 * time.Second)
defer ticker.Stop()
for {
used, err := runtime.FDUsage()
if err != nil {
plog.Errorf("cannot monitor file descriptor usage (%v)", err)
return
}
fileDescriptorUsed.Set(float64(used))
limit, err := runtime.FDLimit()
if err != nil {
plog.Errorf("cannot monitor file descriptor usage (%v)", err)
return
}
if used >= limit/5*4 {
plog.Warningf("80%% of the file descriptor limit is used [used = %d, limit = %d]", used, limit)
}
select {
case <-ticker.C:
case <-done:
return
}
}
}示例2: init
func init() {
rand.Seed(time.Now().UnixNano())
expvar.Publish(
"file_descriptor_limit",
expvar.Func(
func() interface{} {
n, _ := runtime.FDLimit()
return n
},
),
)
}示例3: startClientListeners
func startClientListeners(cfg *Config) (sctxs map[string]*serveCtx, err error) {
if cfg.ClientAutoTLS && cfg.ClientTLSInfo.Empty() {
chosts := make([]string, len(cfg.LCUrls))
for i, u := range cfg.LCUrls {
chosts[i] = u.Host
}
cfg.ClientTLSInfo, err = transport.SelfCert(path.Join(cfg.Dir, "fixtures/client"), chosts)
if err != nil {
plog.Fatalf("could not get certs (%v)", err)
}
} else if cfg.ClientAutoTLS {
plog.Warningf("ignoring client auto TLS since certs given")
}
sctxs = make(map[string]*serveCtx)
for _, u := range cfg.LCUrls {
sctx := newServeCtx()
if u.Scheme == "http" || u.Scheme == "unix" {
if !cfg.ClientTLSInfo.Empty() {
plog.Warningf("The scheme of client url %s is HTTP while peer key/cert files are presented. Ignored key/cert files.", u.String())
}
if cfg.ClientTLSInfo.ClientCertAuth {
plog.Warningf("The scheme of client url %s is HTTP while client cert auth (--client-cert-auth) is enabled. Ignored client cert auth for this url.", u.String())
}
}
if (u.Scheme == "https" || u.Scheme == "unixs") && cfg.ClientTLSInfo.Empty() {
return nil, fmt.Errorf("TLS key/cert (--cert-file, --key-file) must be provided for client url %s with HTTPs scheme", u.String())
}
proto := "tcp"
if u.Scheme == "unix" || u.Scheme == "unixs" {
proto = "unix"
}
sctx.secure = u.Scheme == "https" || u.Scheme == "unixs"
sctx.insecure = !sctx.secure
if oldctx := sctxs[u.Host]; oldctx != nil {
oldctx.secure = oldctx.secure || sctx.secure
oldctx.insecure = oldctx.insecure || sctx.insecure
continue
}
if sctx.l, err = net.Listen(proto, u.Host); err != nil {
return nil, err
}
if fdLimit, fderr := runtimeutil.FDLimit(); fderr == nil {
if fdLimit <= reservedInternalFDNum {
plog.Fatalf("file descriptor limit[%d] of etcd process is too low, and should be set higher than %d to ensure internal usage", fdLimit, reservedInternalFDNum)
}
sctx.l = transport.LimitListener(sctx.l, int(fdLimit-reservedInternalFDNum))
}
if proto == "tcp" {
if sctx.l, err = transport.NewKeepAliveListener(sctx.l, "tcp", nil); err != nil {
return nil, err
}
}
plog.Info("listening for client requests on ", u.Host)
defer func() {
if err != nil {
sctx.l.Close()
plog.Info("stopping listening for client requests on ", u.Host)
}
}()
sctx.userHandlers = cfg.UserHandlers
sctxs[u.Host] = sctx
}
return sctxs, nil
}示例4: startEtcd
// startEtcd launches the etcd server and HTTP handlers for client/server communication.
func startEtcd(cfg *config) (<-chan struct{}, error) {
urlsmap, token, err := getPeerURLsMapAndToken(cfg, "etcd")
if err != nil {
return nil, fmt.Errorf("error setting up initial cluster: %v", err)
}
pt, err := transport.NewTimeoutTransport(cfg.peerTLSInfo, peerDialTimeout(cfg.ElectionMs), rafthttp.ConnReadTimeout, rafthttp.ConnWriteTimeout)
if err != nil {
return nil, err
}
if !cfg.peerTLSInfo.Empty() {
plog.Infof("peerTLS: %s", cfg.peerTLSInfo)
}
plns := make([]net.Listener, 0)
for _, u := range cfg.lpurls {
if u.Scheme == "http" && !cfg.peerTLSInfo.Empty() {
plog.Warningf("The scheme of peer url %s is http while peer key/cert files are presented. Ignored peer key/cert files.", u.String())
}
var l net.Listener
l, err = transport.NewTimeoutListener(u.Host, u.Scheme, cfg.peerTLSInfo, rafthttp.ConnReadTimeout, rafthttp.ConnWriteTimeout)
if err != nil {
return nil, err
}
urlStr := u.String()
plog.Info("listening for peers on ", urlStr)
defer func() {
if err != nil {
l.Close()
plog.Info("stopping listening for peers on ", urlStr)
}
}()
plns = append(plns, l)
}
if !cfg.clientTLSInfo.Empty() {
plog.Infof("clientTLS: %s", cfg.clientTLSInfo)
}
clns := make([]net.Listener, 0)
for _, u := range cfg.lcurls {
if u.Scheme == "http" && !cfg.clientTLSInfo.Empty() {
plog.Warningf("The scheme of client url %s is http while client key/cert files are presented. Ignored client key/cert files.", u.String())
}
var l net.Listener
l, err = transport.NewKeepAliveListener(u.Host, u.Scheme, cfg.clientTLSInfo)
if err != nil {
return nil, err
}
if fdLimit, err := runtimeutil.FDLimit(); err == nil {
if fdLimit <= reservedInternalFDNum {
plog.Fatalf("file descriptor limit[%d] of etcd process is too low, and should be set higher than %d to ensure internal usage", fdLimit, reservedInternalFDNum)
}
l = netutil.LimitListener(l, int(fdLimit-reservedInternalFDNum))
}
urlStr := u.String()
plog.Info("listening for client requests on ", urlStr)
defer func() {
if err != nil {
l.Close()
plog.Info("stopping listening for client requests on ", urlStr)
}
}()
clns = append(clns, l)
}
var v3l net.Listener
if cfg.v3demo {
v3l, err = net.Listen("tcp", cfg.gRPCAddr)
if err != nil {
plog.Fatal(err)
}
plog.Infof("listening for client rpc on %s", cfg.gRPCAddr)
}
srvcfg := &etcdserver.ServerConfig{
Name: cfg.name,
ClientURLs: cfg.acurls,
PeerURLs: cfg.apurls,
DataDir: cfg.dir,
DedicatedWALDir: cfg.walDir,
SnapCount: cfg.snapCount,
MaxSnapFiles: cfg.maxSnapFiles,
MaxWALFiles: cfg.maxWalFiles,
InitialPeerURLsMap: urlsmap,
InitialClusterToken: token,
DiscoveryURL: cfg.durl,
DiscoveryProxy: cfg.dproxy,
NewCluster: cfg.isNewCluster(),
ForceNewCluster: cfg.forceNewCluster,
Transport: pt,
TickMs: cfg.TickMs,
ElectionTicks: cfg.electionTicks(),
V3demo: cfg.v3demo,
StrictReconfigCheck: cfg.strictReconfigCheck,
}
var s *etcdserver.EtcdServer
s, err = etcdserver.NewServer(srvcfg)
//.........這裏部分代碼省略.........
示例5: startEtcd
//.........這裏部分代碼省略.........
plog.Warningf("The scheme of client url %s is HTTP while client cert auth (--client-cert-auth) is enabled. Ignored client cert auth for this url.", u.String())
}
}
if u.Scheme == "https" && ctlscfg == nil {
return nil, fmt.Errorf("TLS key/cert (--cert-file, --key-file) must be provided for client url %s with HTTPs scheme", u.String())
}
ctx := &serveCtx{host: u.Host}
if u.Scheme == "https" {
ctx.secure = true
} else {
ctx.insecure = true
}
if sctxs[u.Host] != nil {
if ctx.secure {
sctxs[u.Host].secure = true
}
if ctx.insecure {
sctxs[u.Host].insecure = true
}
continue
}
var l net.Listener
l, err = net.Listen("tcp", u.Host)
if err != nil {
return nil, err
}
var fdLimit uint64
if fdLimit, err = runtimeutil.FDLimit(); err == nil {
if fdLimit <= reservedInternalFDNum {
plog.Fatalf("file descriptor limit[%d] of etcd process is too low, and should be set higher than %d to ensure internal usage", fdLimit, reservedInternalFDNum)
}
l = transport.LimitListener(l, int(fdLimit-reservedInternalFDNum))
}
l, err = transport.NewKeepAliveListener(l, "tcp", nil)
ctx.l = l
if err != nil {
return nil, err
}
plog.Info("listening for client requests on ", u.Host)
defer func() {
if err != nil {
l.Close()
plog.Info("stopping listening for client requests on ", u.Host)
}
}()
sctxs[u.Host] = ctx
}
srvcfg := &etcdserver.ServerConfig{
Name: cfg.name,
ClientURLs: cfg.acurls,
PeerURLs: cfg.apurls,
DataDir: cfg.dir,
DedicatedWALDir: cfg.walDir,
SnapCount: cfg.snapCount,
MaxSnapFiles: cfg.maxSnapFiles,
MaxWALFiles: cfg.maxWalFiles,
InitialPeerURLsMap: urlsmap,示例6: startEtcd
//.........這裏部分代碼省略.........
plog.Warningf("The scheme of client url %s is HTTP while client cert auth (--client-cert-auth) is enabled. Ignored client cert auth for this url.", u.String())
}
}
if u.Scheme == "https" && ctlscfg == nil {
return nil, fmt.Errorf("TLS key/cert (--cert-file, --key-file) must be provided for client url %s with HTTPs scheme", u.String())
}
ctx := &serveCtx{host: u.Host}
if u.Scheme == "https" {
ctx.secure = true
} else {
ctx.insecure = true
}
if sctxs[u.Host] != nil {
if ctx.secure {
sctxs[u.Host].secure = true
}
if ctx.insecure {
sctxs[u.Host].insecure = true
}
continue
}
var l net.Listener
l, err = net.Listen("tcp", u.Host)
if err != nil {
return nil, err
}
var fdLimit uint64
if fdLimit, err = runtimeutil.FDLimit(); err == nil {
if fdLimit <= reservedInternalFDNum {
plog.Fatalf("file descriptor limit[%d] of etcd process is too low, and should be set higher than %d to ensure internal usage", fdLimit, reservedInternalFDNum)
}
l = transport.LimitListener(l, int(fdLimit-reservedInternalFDNum))
}
l, err = transport.NewKeepAliveListener(l, "tcp", nil)
ctx.l = l
if err != nil {
return nil, err
}
plog.Info("listening for client requests on ", u.Host)
defer func() {
if err != nil {
l.Close()
plog.Info("stopping listening for client requests on ", u.Host)
}
}()
sctxs[u.Host] = ctx
}
//載入服務器相關配置
srvcfg := &etcdserver.ServerConfig{
Name: cfg.name, //etcd服務名
ClientURLs: cfg.acurls, //其他etcd監聽型號地址(一般為其他主機或其他端口) (同步與交互etcd信息)
PeerURLs: cfg.apurls, //監聽信號地址(本機端口) (同步與交互etcd信息)
DataDir: cfg.dir, //數據通信保存位置 (默認產生的文件夾 member/snap member/wal)
DedicatedWALDir: cfg.walDir, //ETCD將寫WAL文件到walDir而不是DATADIR。這允許使用一個專用磁盤 並有助於避免記錄和其它IO操作之間io的競爭。 默認為空 寫入DataDir
SnapCount: cfg.snapCount, //提交的事務數來觸發快照到磁盤 默認為10000
MaxSnapFiles: cfg.maxSnapFiles, //快照文件保留最大數量（0為無限製）默認值：5 windows為:0
MaxWALFiles: cfg.maxWalFiles, //wal文件保留最大數量（0為無限製）默認值：5 windows為:0示例7: startEtcd
// startEtcd launches the etcd server and HTTP handlers for client/server communication.
func startEtcd(cfg *config) (<-chan struct{}, error) {
urlsmap, token, err := getPeerURLsMapAndToken(cfg, "etcd")
if err != nil {
return nil, fmt.Errorf("error setting up initial cluster: %v", err)
}
if cfg.peerAutoTLS && cfg.peerTLSInfo.Empty() {
phosts := make([]string, 0)
for _, u := range cfg.lpurls {
phosts = append(phosts, u.Host)
}
cfg.peerTLSInfo, err = transport.SelfCert(cfg.dir, phosts)
if err != nil {
plog.Fatalf("could not get certs (%v)", err)
}
} else if cfg.peerAutoTLS {
plog.Warningf("ignoring peer auto TLS since certs given")
}
if !cfg.peerTLSInfo.Empty() {
plog.Infof("peerTLS: %s", cfg.peerTLSInfo)
}
plns := make([]net.Listener, 0)
for _, u := range cfg.lpurls {
if u.Scheme == "http" && !cfg.peerTLSInfo.Empty() {
plog.Warningf("The scheme of peer url %s is http while peer key/cert files are presented. Ignored peer key/cert files.", u.String())
}
var l net.Listener
l, err = rafthttp.NewListener(u, cfg.peerTLSInfo)
if err != nil {
return nil, err
}
urlStr := u.String()
plog.Info("listening for peers on ", urlStr)
defer func() {
if err != nil {
l.Close()
plog.Info("stopping listening for peers on ", urlStr)
}
}()
plns = append(plns, l)
}
if !cfg.clientTLSInfo.Empty() {
plog.Infof("clientTLS: %s", cfg.clientTLSInfo)
}
clns := make([]net.Listener, 0)
for _, u := range cfg.lcurls {
if u.Scheme == "http" && !cfg.clientTLSInfo.Empty() {
plog.Warningf("The scheme of client url %s is http while client key/cert files are presented. Ignored client key/cert files.", u.String())
}
var l net.Listener
l, err = net.Listen("tcp", u.Host)
if err != nil {
return nil, err
}
if fdLimit, err := runtimeutil.FDLimit(); err == nil {
if fdLimit <= reservedInternalFDNum {
plog.Fatalf("file descriptor limit[%d] of etcd process is too low, and should be set higher than %d to ensure internal usage", fdLimit, reservedInternalFDNum)
}
l = transport.LimitListener(l, int(fdLimit-reservedInternalFDNum))
}
// Do not wrap around this listener if TLS Info is set.
// HTTPS server expects TLS Conn created by TLSListener.
l, err = transport.NewKeepAliveListener(l, u.Scheme, cfg.clientTLSInfo)
if err != nil {
return nil, err
}
urlStr := u.String()
plog.Info("listening for client requests on ", urlStr)
defer func() {
if err != nil {
l.Close()
plog.Info("stopping listening for client requests on ", urlStr)
}
}()
clns = append(clns, l)
}
srvcfg := &etcdserver.ServerConfig{
Name: cfg.name,
ClientURLs: cfg.acurls,
PeerURLs: cfg.apurls,
DataDir: cfg.dir,
DedicatedWALDir: cfg.walDir,
SnapCount: cfg.snapCount,
MaxSnapFiles: cfg.maxSnapFiles,
MaxWALFiles: cfg.maxWalFiles,
InitialPeerURLsMap: urlsmap,
InitialClusterToken: token,
DiscoveryURL: cfg.durl,
DiscoveryProxy: cfg.dproxy,
NewCluster: cfg.isNewCluster(),
ForceNewCluster: cfg.forceNewCluster,
//.........這裏部分代碼省略.........