Golang etcdserverpb.RangeRequest_SortTarget函數代碼示例

本文整理匯總了Golang中github.com/coreos/etcd/etcdserver/etcdserverpb.RangeRequest_SortTarget函數的典型用法代碼示例。如果您正苦於以下問題：Golang RangeRequest_SortTarget函數的具體用法？Golang RangeRequest_SortTarget怎麽用？Golang RangeRequest_SortTarget使用的例子？那麽, 這裏精選的函數代碼示例或許可以為您提供幫助。

在下文中一共展示了RangeRequest_SortTarget函數的6個代碼示例，這些例子默認根據受歡迎程度排序。您可以為喜歡或者感覺有用的代碼點讚，您的評價將有助於係統推薦出更棒的Golang代碼示例。

示例1: toRequestOp

func (op Op) toRequestOp() *pb.RequestOp {
	switch op.t {
	case tRange:
		r := &pb.RangeRequest{
			Key:          op.key,
			RangeEnd:     op.end,
			Limit:        op.limit,
			Revision:     op.rev,
			Serializable: op.serializable,
			KeysOnly:     op.keysOnly,
			CountOnly:    op.countOnly,
		}
		if op.sort != nil {
			r.SortOrder = pb.RangeRequest_SortOrder(op.sort.Order)
			r.SortTarget = pb.RangeRequest_SortTarget(op.sort.Target)
		}
		return &pb.RequestOp{Request: &pb.RequestOp_RequestRange{RequestRange: r}}
	case tPut:
		r := &pb.PutRequest{Key: op.key, Value: op.val, Lease: int64(op.leaseID), PrevKv: op.prevKV}
		return &pb.RequestOp{Request: &pb.RequestOp_RequestPut{RequestPut: r}}
	case tDeleteRange:
		r := &pb.DeleteRangeRequest{Key: op.key, RangeEnd: op.end, PrevKv: op.prevKV}

		return &pb.RequestOp{Request: &pb.RequestOp_RequestDeleteRange{RequestDeleteRange: r}}
	default:
		panic("Unknown Op")
	}
}

開發者ID:bluebreezecf，項目名稱:etcd，代碼行數:28，代碼來源:op.go

示例2: do

func (kv *kv) do(ctx context.Context, op Op) (OpResponse, error) {
	var err error
	switch op.t {
	// TODO: handle other ops
	case tRange:
		var resp *pb.RangeResponse
		r := &pb.RangeRequest{Key: op.key, RangeEnd: op.end, Limit: op.limit, Revision: op.rev, Serializable: op.serializable}
		if op.sort != nil {
			r.SortOrder = pb.RangeRequest_SortOrder(op.sort.Order)
			r.SortTarget = pb.RangeRequest_SortTarget(op.sort.Target)
		}

		resp, err = kv.remote.Range(ctx, r)
		if err == nil {
			return OpResponse{get: (*GetResponse)(resp)}, nil
		}
	case tPut:
		var resp *pb.PutResponse
		r := &pb.PutRequest{Key: op.key, Value: op.val, Lease: int64(op.leaseID)}
		resp, err = kv.remote.Put(ctx, r)
		if err == nil {
			return OpResponse{put: (*PutResponse)(resp)}, nil
		}
	case tDeleteRange:
		var resp *pb.DeleteRangeResponse
		r := &pb.DeleteRangeRequest{Key: op.key, RangeEnd: op.end}
		resp, err = kv.remote.DeleteRange(ctx, r)
		if err == nil {
			return OpResponse{del: (*DeleteResponse)(resp)}, nil
		}
	default:
		panic("Unknown op")
	}
	return OpResponse{}, err
}

開發者ID:jbdunc2，項目名稱:etcd，代碼行數:35，代碼來源:kv.go

示例3: do

func (kv *kv) do(ctx context.Context, op Op) (*pb.ResponseUnion, error) {
	for {
		var err error
		switch op.t {
		// TODO: handle other ops
		case tRange:
			var resp *pb.RangeResponse
			r := &pb.RangeRequest{Key: op.key, RangeEnd: op.end, Limit: op.limit, Revision: op.rev}
			if op.sort != nil {
				r.SortOrder = pb.RangeRequest_SortOrder(op.sort.Order)
				r.SortTarget = pb.RangeRequest_SortTarget(op.sort.Target)
			}

			resp, err = kv.getRemote().Range(ctx, r)
			if err == nil {
				respu := &pb.ResponseUnion_ResponseRange{ResponseRange: resp}
				return &pb.ResponseUnion{Response: respu}, nil
			}
		case tPut:
			var resp *pb.PutResponse
			r := &pb.PutRequest{Key: op.key, Value: op.val, Lease: int64(op.leaseID)}
			resp, err = kv.getRemote().Put(ctx, r)
			if err == nil {
				respu := &pb.ResponseUnion_ResponsePut{ResponsePut: resp}
				return &pb.ResponseUnion{Response: respu}, nil
			}
		case tDeleteRange:
			var resp *pb.DeleteRangeResponse
			r := &pb.DeleteRangeRequest{Key: op.key, RangeEnd: op.end}
			resp, err = kv.getRemote().DeleteRange(ctx, r)
			if err == nil {
				respu := &pb.ResponseUnion_ResponseDeleteRange{ResponseDeleteRange: resp}
				return &pb.ResponseUnion{Response: respu}, nil
			}
		default:
			panic("Unknown op")
		}

		if isRPCError(err) {
			return nil, err
		}

		// do not retry on modifications
		if op.isWrite() {
			go kv.switchRemote(err)
			return nil, err
		}

		if nerr := kv.switchRemote(err); nerr != nil {
			return nil, nerr
		}
	}
}

開發者ID:khogeland，項目名稱:etcd，代碼行數:53，代碼來源:kv.go

示例4: Do

func (kv *kv) Do(ctx context.Context, op Op) (OpResponse, error) {
	for {
		var err error
		switch op.t {
		// TODO: handle other ops
		case tRange:
			var resp *pb.RangeResponse
			r := &pb.RangeRequest{Key: op.key, RangeEnd: op.end, Limit: op.limit, Revision: op.rev}
			if op.sort != nil {
				r.SortOrder = pb.RangeRequest_SortOrder(op.sort.Order)
				r.SortTarget = pb.RangeRequest_SortTarget(op.sort.Target)
			}

			resp, err = kv.getRemote().Range(ctx, r)
			if err == nil {
				return OpResponse{get: (*GetResponse)(resp)}, nil
			}
		case tPut:
			var resp *pb.PutResponse
			r := &pb.PutRequest{Key: op.key, Value: op.val, Lease: int64(op.leaseID)}
			resp, err = kv.getRemote().Put(ctx, r)
			if err == nil {
				return OpResponse{put: (*PutResponse)(resp)}, nil
			}
		case tDeleteRange:
			var resp *pb.DeleteRangeResponse
			r := &pb.DeleteRangeRequest{Key: op.key, RangeEnd: op.end}
			resp, err = kv.getRemote().DeleteRange(ctx, r)
			if err == nil {
				return OpResponse{del: (*DeleteResponse)(resp)}, nil
			}
		default:
			panic("Unknown op")
		}

		if isHalted(ctx, err) {
			return OpResponse{}, err
		}

		// do not retry on modifications
		if op.isWrite() {
			go kv.switchRemote(err)
			return OpResponse{}, err
		}

		if nerr := kv.switchRemote(err); nerr != nil {
			return OpResponse{}, nerr
		}
	}
}

開發者ID:lrita，項目名稱:etcd，代碼行數:50，代碼來源:kv.go

示例5: toRequestUnion

func (op Op) toRequestUnion() *pb.RequestUnion {
	switch op.t {
	case tRange:
		r := &pb.RangeRequest{Key: op.key, RangeEnd: op.end, Limit: op.limit, Revision: op.rev}
		if op.sort != nil {
			r.SortOrder = pb.RangeRequest_SortOrder(op.sort.Order)
			r.SortTarget = pb.RangeRequest_SortTarget(op.sort.Target)
		}
		return &pb.RequestUnion{Request: &pb.RequestUnion_RequestRange{RequestRange: r}}
	case tPut:
		r := &pb.PutRequest{Key: op.key, Value: op.val, Lease: int64(op.leaseID)}
		return &pb.RequestUnion{Request: &pb.RequestUnion_RequestPut{RequestPut: r}}
	case tDeleteRange:
		r := &pb.DeleteRangeRequest{Key: op.key, RangeEnd: op.end}
		return &pb.RequestUnion{Request: &pb.RequestUnion_RequestDeleteRange{RequestDeleteRange: r}}
	default:
		panic("Unknown Op")
	}
}

開發者ID:fengshao0907，項目名稱:etcd，代碼行數:19，代碼來源:op.go

示例6: toRangeRequest

func (op Op) toRangeRequest() *pb.RangeRequest {
	if op.t != tRange {
		panic("op.t != tRange")
	}
	r := &pb.RangeRequest{
		Key:               op.key,
		RangeEnd:          op.end,
		Limit:             op.limit,
		Revision:          op.rev,
		Serializable:      op.serializable,
		KeysOnly:          op.keysOnly,
		CountOnly:         op.countOnly,
		MinModRevision:    op.minModRev,
		MaxModRevision:    op.maxModRev,
		MinCreateRevision: op.minCreateRev,
		MaxCreateRevision: op.maxCreateRev,
	}
	if op.sort != nil {
		r.SortOrder = pb.RangeRequest_SortOrder(op.sort.Order)
		r.SortTarget = pb.RangeRequest_SortTarget(op.sort.Target)
	}
	return r
}

開發者ID:pulcy，項目名稱:vault-monkey，代碼行數:23，代碼來源:op.go

注：本文中的github.com/coreos/etcd/etcdserver/etcdserverpb.RangeRequest_SortTarget函數示例由純淨天空整理自Github/MSDocs等開源代碼及文檔管理平台，相關代碼片段篩選自各路編程大神貢獻的開源項目，源碼版權歸原作者所有，傳播和使用請參考對應項目的License；未經允許，請勿轉載。