Golang BatchRequest.Timestamp方法代碼示例

// SendBatch implements the batch.Sender interface. It subdivides
// the Batch into batches admissible for sending (preventing certain
// illegal mixtures of requests), executes each individual part
// (which may span multiple ranges), and recombines the response.
func (ds *DistSender) SendBatch(ctx context.Context, ba proto.BatchRequest) (*proto.BatchResponse, error) {
	// In the event that timestamp isn't set and read consistency isn't
	// required, set the timestamp using the local clock.
	// TODO(tschottdorf): right place for this?
	if ba.ReadConsistency == proto.INCONSISTENT && ba.Timestamp.Equal(proto.ZeroTimestamp) {
		// Make sure that after the call, args hasn't changed.
		defer func(timestamp proto.Timestamp) {
			ba.Timestamp = timestamp
		}(ba.Timestamp)
		ba.Timestamp = ds.clock.Now()
	}

	// TODO(tschottdorf): provisional instantiation.
	return newChunkingSender(ds.sendChunk).SendBatch(ctx, ba)
}

func testPut() proto.BatchRequest {
	var ba proto.BatchRequest
	ba.Timestamp = testTS
	put := &proto.PutRequest{}
	put.Key = testKey
	ba.Add(put)
	return ba
}

func (tc *TxnCoordSender) heartbeat(id string, trace *tracer.Trace, ctx context.Context) bool {
	tc.Lock()
	proceed := true
	txnMeta := tc.txns[id]
	// Before we send a heartbeat, determine whether this transaction
	// should be considered abandoned. If so, exit heartbeat.
	if txnMeta.hasClientAbandonedCoord(tc.clock.PhysicalNow()) {
		// TODO(tschottdorf): should we be more proactive here?
		// The client might be continuing the transaction
		// through another coordinator, but in the most likely
		// case it's just gone and the open transaction record
		// could block concurrent operations.
		if log.V(1) {
			log.Infof("transaction %s abandoned; stopping heartbeat",
				txnMeta.txn)
		}
		proceed = false
	}
	// txnMeta.txn is possibly replaced concurrently,
	// so grab a copy before unlocking.
	txn := txnMeta.txn
	tc.Unlock()
	if !proceed {
		return false
	}

	hb := &proto.HeartbeatTxnRequest{}
	hb.Key = txn.Key
	ba := proto.BatchRequest{}
	ba.Timestamp = tc.clock.Now()
	ba.Key = txn.Key
	ba.Txn = &txn
	ba.Add(hb)

	epochEnds := trace.Epoch("heartbeat")
	_, err := tc.wrapped.Send(ctx, ba)
	epochEnds()
	// If the transaction is not in pending state, then we can stop
	// the heartbeat. It's either aborted or committed, and we resolve
	// write intents accordingly.
	if err != nil {
		log.Warningf("heartbeat to %s failed: %s", txn, err)
	}
	// TODO(bdarnell): once we have gotten a heartbeat response with
	// Status != PENDING, future heartbeats are useless. However, we
	// need to continue the heartbeatLoop until the client either
	// commits or abandons the transaction. We could save a little
	// pointless work by restructuring this loop to stop sending
	// heartbeats between the time that the transaction is aborted and
	// the client finds out. Furthermore, we could use this information
	// to send TransactionAbortedErrors to the client so it can restart
	// immediately instead of running until its EndTransaction.
	return true
}

// Send implements the batch.Sender interface. If the request is part of a
// transaction, the TxnCoordSender adds the transaction to a map of active
// transactions and begins heartbeating it. Every subsequent request for the
// same transaction updates the lastUpdate timestamp to prevent live
// transactions from being considered abandoned and garbage collected.
// Read/write mutating requests have their key or key range added to the
// transaction's interval tree of key ranges for eventual cleanup via resolved
// write intents; they're tagged to an outgoing EndTransaction request, with
// the receiving replica in charge of resolving them.
func (tc *TxnCoordSender) Send(ctx context.Context, ba proto.BatchRequest) (*proto.BatchResponse, *proto.Error) {
	tc.maybeBeginTxn(&ba)
	ba.CmdID = ba.GetOrCreateCmdID(tc.clock.PhysicalNow())
	var startNS int64

	// This is the earliest point at which the request has a ClientCmdID and/or
	// TxnID (if applicable). Begin a Trace which follows this request.
	trace := tc.tracer.NewTrace(&ba)
	defer trace.Finalize()
	// TODO(tschottdorf): always "Batch"
	defer trace.Epoch(fmt.Sprintf("sending %s", ba.Method()))()
	ctx = tracer.ToCtx(ctx, trace)

	// TODO(tschottdorf): No looping through the batch will be necessary once
	// we've eliminated all the redundancies.
	for _, arg := range ba.Requests {
		trace.Event(fmt.Sprintf("%T", arg.GetValue()))
		if err := updateForBatch(arg.GetInner(), ba.RequestHeader); err != nil {
			return nil, proto.NewError(err)
		}
	}

	var id string // optional transaction ID
	if ba.Txn != nil {
		// If this request is part of a transaction...
		id = string(ba.Txn.ID)
		// Verify that if this Transaction is not read-only, we have it on
		// file. If not, refuse writes - the client must have issued a write on
		// another coordinator previously.
		if ba.Txn.Writing && ba.IsTransactionWrite() {
			tc.Lock()
			_, ok := tc.txns[id]
			tc.Unlock()
			if !ok {
				return nil, proto.NewError(util.Errorf("transaction must not write on multiple coordinators"))
			}
		}

		// Set the timestamp to the original timestamp for read-only
		// commands and to the transaction timestamp for read/write
		// commands.
		if ba.IsReadOnly() {
			ba.Timestamp = ba.Txn.OrigTimestamp
		} else {
			ba.Timestamp = ba.Txn.Timestamp
		}

		if rArgs, ok := ba.GetArg(proto.EndTransaction); ok {
			et := rArgs.(*proto.EndTransactionRequest)
			// Remember when EndTransaction started in case we want to
			// be linearizable.
			startNS = tc.clock.PhysicalNow()
			if len(et.Intents) > 0 {
				// TODO(tschottdorf): it may be useful to allow this later.
				// That would be part of a possible plan to allow txns which
				// write on multiple coordinators.
				return nil, proto.NewError(util.Errorf("client must not pass intents to EndTransaction"))
			}
			if len(et.Key) != 0 {
				return nil, proto.NewError(util.Errorf("EndTransaction must not have a Key set"))
			}
			et.Key = ba.Txn.Key

			tc.Lock()
			txnMeta, metaOK := tc.txns[id]
			if id != "" && metaOK {
				et.Intents = txnMeta.intents()
			}
			tc.Unlock()

			if intents := ba.GetIntents(); len(intents) > 0 {
				// Writes in Batch, so EndTransaction is fine. Should add
				// outstanding intents to EndTransaction, though.
				// TODO(tschottdorf): possible issues when the batch fails,
				// but the intents have been added anyways.
				// TODO(tschottdorf): some of these intents may be covered
				// by others, for example {[a,b), a}). This can lead to
				// some extra requests when those are non-local to the txn
				// record. But it doesn't seem worth optimizing now.
				et.Intents = append(et.Intents, intents...)
			} else if !metaOK {
				// If we don't have the transaction, then this must be a retry
				// by the client. We can no longer reconstruct a correct
				// request so we must fail.
				//
				// TODO(bdarnell): if we had a GetTransactionStatus API then
				// we could lookup the transaction and return either nil or
				// TransactionAbortedError instead of this ambivalent error.
				return nil, proto.NewError(util.Errorf("transaction is already committed or aborted"))
			}
			if len(et.Intents) == 0 {
//.........這裏部分代碼省略.........