Golang Timestamp.Less方法代碼示例

func replicaGCShouldQueueImpl(
	now, lastCheck, lastActivity hlc.Timestamp, isCandidate bool,
) (bool, float64) {
	timeout := ReplicaGCQueueInactivityThreshold
	priority := replicaGCPriorityDefault

	if isCandidate {
		// If the range is a candidate (which happens if its former replica set
		// ignores it), let it expire much earlier.
		timeout = ReplicaGCQueueCandidateTimeout
		priority = replicaGCPriorityCandidate
	} else if now.Less(lastCheck.Add(ReplicaGCQueueInactivityThreshold.Nanoseconds(), 0)) {
		// Return false immediately if the previous check was less than the
		// check interval in the past. Note that we don't do this if the
		// replica is in candidate state, in which case we want to be more
		// aggressive - a failed rebalance attempt could have checked this
		// range, and candidate state suggests that a retry succeeded. See
		// #7489.
		return false, 0
	}

	shouldQ := lastActivity.Add(timeout.Nanoseconds(), 0).Less(now)

	if !shouldQ {
		return false, 0
	}

	return shouldQ, priority
}

// UpdateDeadlineMaybe sets the transactions deadline to the lower of the
// current one (if any) and the passed value.
func (txn *Txn) UpdateDeadlineMaybe(deadline hlc.Timestamp) bool {
	if txn.deadline == nil || deadline.Less(*txn.deadline) {
		txn.deadline = &deadline
		return true
	}
	return false
}

// UpdateObservedTimestamp stores a timestamp off a node's clock for future
// operations in the transaction. When multiple calls are made for a single
// nodeID, the lowest timestamp prevails.
func (t *Transaction) UpdateObservedTimestamp(nodeID NodeID, maxTS hlc.Timestamp) {
	if t.ObservedTimestamps == nil {
		t.ObservedTimestamps = make(map[NodeID]hlc.Timestamp)
	}
	if ts, ok := t.ObservedTimestamps[nodeID]; !ok || maxTS.Less(ts) {
		t.ObservedTimestamps[nodeID] = maxTS
	}
}

// leaseStatus returns lease status. If the lease is epoch-based,
// the liveness field will be set to the liveness used to compute
// its state, unless state == leaseError.
//
// - The lease is considered valid if the timestamp is covered by the
//   supplied lease. This is determined differently depending on the
//   lease properties. For expiration-based leases, the timestamp is
//   covered if it's less than the expiration (minus the maximum
//   clock offset). For epoch-based "node liveness" leases, the lease
//   epoch must match the owner node's liveness epoch -AND- the
//   timestamp must be within the node's liveness expiration (also
//   minus the maximum clock offset).
//
//   To be valid, a lease which contains a valid ProposedTS must have
//   a proposed timestamp greater than the minimum proposed timestamp,
//   which prevents a restarted process from serving commands, since
//   the command queue has been wiped through the restart.
//
// - The lease is considered in stasis if the timestamp is within the
//   maximum clock offset window of the lease expiration.
//
// - The lease is considered expired in all other cases.
//
// The maximum clock offset must always be taken into consideration to
// avoid a failure of linearizability on a single register during
// lease changes. Without that stasis period, the following could
// occur:
//
// * a range lease gets committed on the new lease holder (but not the old).
// * client proposes and commits a write on new lease holder (with a
//   timestamp just greater than the expiration of the old lease).
// * client tries to read what it wrote, but hits a slow coordinator
//   (which assigns a timestamp covered by the old lease).
// * the read is served by the old lease holder (which has not
//   processed the change in lease holdership).
// * the client fails to read their own write.
func (r *Replica) leaseStatus(
	lease *roachpb.Lease, timestamp, minProposedTS hlc.Timestamp,
) LeaseStatus {
	status := LeaseStatus{timestamp: timestamp, lease: lease}
	if lease == nil {
		status.state = leaseExpired
		return status
	}
	var expiration hlc.Timestamp
	if lease.Type() == roachpb.LeaseExpiration {
		expiration = lease.Expiration
	} else {
		var err error
		status.liveness, err = r.store.cfg.NodeLiveness.GetLiveness(lease.Replica.NodeID)
		if err != nil || status.liveness.Epoch < *lease.Epoch {
			// If lease validity can't be determined (e.g. gossip is down
			// and liveness info isn't available for owner), we can neither
			// use the lease nor do we want to attempt to acquire it.
			status.state = leaseError
			return status
		}
		if status.liveness.Epoch > *lease.Epoch {
			status.state = leaseExpired
			return status
		}
		expiration = status.liveness.Expiration
	}
	stasis := expiration.Add(-int64(r.store.Clock().MaxOffset()), 0)
	if timestamp.Less(stasis) {
		status.state = leaseValid
		// If the replica owns the lease, additional verify that the lease's
		// proposed timestamp is not earlier than the min proposed timestamp.
		if lease.Replica.StoreID == r.store.StoreID() &&
			lease.ProposedTS != nil && lease.ProposedTS.Less(minProposedTS) {
			status.state = leaseProscribed
		}
	} else if timestamp.Less(expiration) {
		status.state = leaseStasis
	} else {
		status.state = leaseExpired
	}
	return status
}

// add the specified timestamp to the cache as covering the range of
// keys from start to end. If end is nil, the range covers the start
// key only. txnID is nil for no transaction. readTSCache specifies
// whether the command adding this timestamp should update the read
// timestamp; false to update the write timestamp cache.
func (tc *timestampCache) add(
	start, end roachpb.Key, timestamp hlc.Timestamp, txnID *uuid.UUID, readTSCache bool,
) {
	// This gives us a memory-efficient end key if end is empty.
	if len(end) == 0 {
		end = start.Next()
		start = end[:len(start)]
	}
	tc.latest.Forward(timestamp)
	// Only add to the cache if the timestamp is more recent than the
	// low water mark.
	if tc.lowWater.Less(timestamp) {
		tcache := tc.wCache
		if readTSCache {
			tcache = tc.rCache
		}

		addRange := func(r interval.Range) {
			value := cacheValue{timestamp: timestamp, txnID: txnID}
			key := tcache.MakeKey(r.Start, r.End)
			entry := makeCacheEntry(key, value)
			tcache.AddEntry(entry)
		}
		r := interval.Range{
			Start: interval.Comparable(start),
			End:   interval.Comparable(end),
		}

		// Check existing, overlapping entries and truncate/split/remove if
		// superseded and in the past. If existing entries are in the future,
		// subtract from the range/ranges that need to be added to cache.
		for _, entry := range tcache.GetOverlaps(r.Start, r.End) {
			cv := entry.Value.(*cacheValue)
			key := entry.Key.(*cache.IntervalKey)
			sCmp := r.Start.Compare(key.Start)
			eCmp := r.End.Compare(key.End)
			if cv.timestamp.Less(timestamp) {
				// The existing interval has a timestamp less than the new
				// interval. Compare interval ranges to determine how to
				// modify existing interval.
				switch {
				case sCmp == 0 && eCmp == 0:
					// New and old are equal; replace old with new and avoid the need to insert new.
					//
					// New: ------------
					// Old: ------------
					//
					// New: ------------
					// Old:
					*cv = cacheValue{timestamp: timestamp, txnID: txnID}
					tcache.MoveToEnd(entry)
					return
				case sCmp <= 0 && eCmp >= 0:
					// New contains or is equal to old; delete old.
					//
					// New: ------------      ------------      ------------
					// Old:   --------    or    ----------  or  ----------
					//
					// New: ------------      ------------      ------------
					// Old:
					tcache.DelEntry(entry)
				case sCmp > 0 && eCmp < 0:
					// Old contains new; split up old into two.
					//
					// New:     ----
					// Old: ------------
					//
					// New:     ----
					// Old: ----    ----
					oldEnd := key.End
					key.End = r.Start

					newKey := tcache.MakeKey(r.End, oldEnd)
					newEntry := makeCacheEntry(newKey, *cv)
					tcache.AddEntryAfter(newEntry, entry)
				case eCmp >= 0:
					// Left partial overlap; truncate old end.
					//
					// New:     --------          --------
					// Old: --------      or  ------------
					//
					// New:     --------          --------
					// Old: ----              ----
					key.End = r.Start
				case sCmp <= 0:
					// Right partial overlap; truncate old start.
					//
					// New: --------          --------
					// Old:     --------  or  ------------
					//
					// New: --------          --------
					// Old:         ----              ----
					key.Start = r.End
				default:
					panic(fmt.Sprintf("no overlap between %v and %v", key.Range, r))
//.........這裏部分代碼省略.........

// Covers returns true if the given timestamp can be served by the Lease.
// This is the case if the timestamp precedes the Lease's stasis period.
// Note that the fact that a lease covers a timestamp is not enough for the
// holder of the lease to be able to serve a read with that timestamp;
// pendingLeaderLeaseRequest.TransferInProgress() should also be consulted to
// account for possible lease transfers.
func (l Lease) Covers(timestamp hlc.Timestamp) bool {
	return timestamp.Less(l.StartStasis)
}

// TestTxnCoordSenderHeartbeat verifies periodic heartbeat of the
// transaction record.
func TestTxnCoordSenderHeartbeat(t *testing.T) {
	defer leaktest.AfterTest(t)()
	s, sender := createTestDB(t)
	defer s.Stop()
	defer teardownHeartbeats(sender)

	// Set heartbeat interval to 1ms for testing.
	sender.heartbeatInterval = 1 * time.Millisecond

	initialTxn := client.NewTxn(context.Background(), *s.DB)
	if err := initialTxn.Put(roachpb.Key("a"), []byte("value")); err != nil {
		t.Fatal(err)
	}

	// Verify 3 heartbeats.
	var heartbeatTS hlc.Timestamp
	for i := 0; i < 3; i++ {
		util.SucceedsSoon(t, func() error {
			txn, pErr := getTxn(sender, &initialTxn.Proto)
			if pErr != nil {
				t.Fatal(pErr)
			}
			// Advance clock by 1ns.
			// Locking the TxnCoordSender to prevent a data race.
			sender.Lock()
			s.Manual.Increment(1)
			sender.Unlock()
			if txn.LastHeartbeat != nil && heartbeatTS.Less(*txn.LastHeartbeat) {
				heartbeatTS = *txn.LastHeartbeat
				return nil
			}
			return errors.Errorf("expected heartbeat")
		})
	}

	// Sneakily send an ABORT right to DistSender (bypassing TxnCoordSender).
	{
		var ba roachpb.BatchRequest
		ba.Add(&roachpb.EndTransactionRequest{
			Commit: false,
			Span:   roachpb.Span{Key: initialTxn.Proto.Key},
		})
		ba.Txn = &initialTxn.Proto
		if _, pErr := sender.wrapped.Send(context.Background(), ba); pErr != nil {
			t.Fatal(pErr)
		}
	}

	util.SucceedsSoon(t, func() error {
		sender.Lock()
		defer sender.Unlock()
		if txnMeta, ok := sender.txns[*initialTxn.Proto.ID]; !ok {
			t.Fatal("transaction unregistered prematurely")
		} else if txnMeta.txn.Status != roachpb.ABORTED {
			return fmt.Errorf("transaction is not aborted")
		}
		return nil
	})

	// Trying to do something else should give us a TransactionAbortedError.
	_, err := initialTxn.Get("a")
	assertTransactionAbortedError(t, err)
}

// isAsOf analyzes a select statement to bypass the logic in newPlan(),
// since that requires the transaction to be started already. If the returned
// timestamp is not nil, it is the timestamp to which a transaction should
// be set.
//
// max is a lower bound on what the transaction's timestamp will be. Used to
// check that the user didn't specify a timestamp in the future.
func isAsOf(planMaker *planner, stmt parser.Statement, max hlc.Timestamp) (*hlc.Timestamp, error) {
	s, ok := stmt.(*parser.Select)
	if !ok {
		return nil, nil
	}
	sc, ok := s.Select.(*parser.SelectClause)
	if !ok {
		return nil, nil
	}
	if sc.From == nil || sc.From.AsOf.Expr == nil {
		return nil, nil
	}
	te, err := sc.From.AsOf.Expr.TypeCheck(nil, parser.TypeString)
	if err != nil {
		return nil, err
	}
	d, err := te.Eval(&planMaker.evalCtx)
	if err != nil {
		return nil, err
	}
	var ts hlc.Timestamp
	switch d := d.(type) {
	case *parser.DString:
		// Allow nanosecond precision because the timestamp is only used by the
		// system and won't be returned to the user over pgwire.
		dt, err := parser.ParseDTimestamp(string(*d), time.Nanosecond)
		if err != nil {
			return nil, err
		}
		ts.WallTime = dt.Time.UnixNano()
	case *parser.DInt:
		ts.WallTime = int64(*d)
	case *parser.DDecimal:
		// Format the decimal into a string and split on `.` to extract the nanosecond
		// walltime and logical tick parts.
		s := d.String()
		parts := strings.SplitN(s, ".", 2)
		nanos, err := strconv.ParseInt(parts[0], 10, 64)
		if err != nil {
			return nil, errors.Wrap(err, "parse AS OF SYSTEM TIME argument")
		}
		var logical int64
		if len(parts) > 1 {
			// logicalLength is the number of decimal digits expected in the
			// logical part to the right of the decimal. See the implementation of
			// cluster_logical_timestamp().
			const logicalLength = 10
			p := parts[1]
			if lp := len(p); lp > logicalLength {
				return nil, errors.Errorf("bad AS OF SYSTEM TIME argument: logical part has too many digits")
			} else if lp < logicalLength {
				p += strings.Repeat("0", logicalLength-lp)
			}
			logical, err = strconv.ParseInt(p, 10, 32)
			if err != nil {
				return nil, errors.Wrap(err, "parse AS OF SYSTEM TIME argument")
			}
		}
		ts.WallTime = nanos
		ts.Logical = int32(logical)
	default:
		return nil, fmt.Errorf("unexpected AS OF SYSTEM TIME argument: %s (%T)", d.ResolvedType(), d)
	}
	if max.Less(ts) {
		return nil, fmt.Errorf("cannot specify timestamp in the future")
	}
	return &ts, nil
}

func (l *Liveness) isLive(now hlc.Timestamp, maxOffset time.Duration) bool {
	expiration := l.Expiration.Add(-maxOffset.Nanoseconds(), 0)
	return now.Less(expiration)
}