本文整理匯總了Golang中github.com/btcsuite/btcd/wire.MsgTx.AddTxOut方法的典型用法代碼示例。如果您正苦於以下問題:Golang MsgTx.AddTxOut方法的具體用法?Golang MsgTx.AddTxOut怎麽用?Golang MsgTx.AddTxOut使用的例子?那麽, 這裏精選的方法代碼示例或許可以為您提供幫助。您也可以進一步了解該方法所在類github.com/btcsuite/btcd/wire.MsgTx
的用法示例。
在下文中一共展示了MsgTx.AddTxOut方法的5個代碼示例,這些例子默認根據受歡迎程度排序。您可以為喜歡或者感覺有用的代碼點讚,您的評價將有助於係統推薦出更棒的Golang代碼示例。
示例1: addChange
// addChange adds a new output with the given amount and address, and
// randomizes the index (and returns it) of the newly added output.
func addChange(msgtx *wire.MsgTx, change btcutil.Amount, changeAddr btcutil.Address) (int, error) {
pkScript, err := txscript.PayToAddrScript(changeAddr)
if err != nil {
return 0, fmt.Errorf("cannot create txout script: %s", err)
}
msgtx.AddTxOut(wire.NewTxOut(int64(change), pkScript))
// Randomize index of the change output.
rng := badrand.New(badrand.NewSource(time.Now().UnixNano()))
r := rng.Int31n(int32(len(msgtx.TxOut))) // random index
c := len(msgtx.TxOut) - 1 // change index
msgtx.TxOut[r], msgtx.TxOut[c] = msgtx.TxOut[c], msgtx.TxOut[r]
return int(r), nil
}
示例2: addHTLC
// addHTLC...
// NOTE: This MUST be called with stateMtx held.
func (lc *LightningChannel) addHTLC(ourCommitTx, theirCommitTx *wire.MsgTx,
paymentDesc *PaymentDescriptor) error {
// If the HTLC is going to us, then we're the sender, otherwise they
// are.
var senderKey, receiverKey *btcec.PublicKey
var senderRevocation, receiverRevocation []byte
if paymentDesc.PayToUs {
receiverKey = lc.channelState.OurCommitKey.PubKey()
receiverRevocation = paymentDesc.OurRevocation[:]
senderKey = lc.channelState.TheirCommitKey
senderRevocation = paymentDesc.TheirRevocation[:]
} else {
senderKey = lc.channelState.OurCommitKey.PubKey()
senderRevocation = paymentDesc.OurRevocation[:]
receiverKey = lc.channelState.TheirCommitKey
receiverRevocation = paymentDesc.TheirRevocation[:]
}
// Generate the proper redeem scripts for the HTLC output for both the
// sender and the receiver.
timeout := paymentDesc.Timeout
rHash := paymentDesc.RHash
delay := lc.channelState.CsvDelay
senderPKScript, err := senderHTLCScript(timeout, delay, senderKey,
receiverKey, senderRevocation[:], rHash[:])
if err != nil {
return nil
}
receiverPKScript, err := receiverHTLCScript(timeout, delay, senderKey,
receiverKey, receiverRevocation[:], rHash[:])
if err != nil {
return nil
}
// Now that we have the redeem scripts, create the P2SH public key
// script for each.
senderP2SH, err := scriptHashPkScript(senderPKScript)
if err != nil {
return nil
}
receiverP2SH, err := scriptHashPkScript(receiverPKScript)
if err != nil {
return nil
}
// Add the new HTLC outputs to the respective commitment transactions.
amountPending := int64(paymentDesc.Value)
if paymentDesc.PayToUs {
ourCommitTx.AddTxOut(wire.NewTxOut(amountPending, receiverP2SH))
theirCommitTx.AddTxOut(wire.NewTxOut(amountPending, senderP2SH))
} else {
ourCommitTx.AddTxOut(wire.NewTxOut(amountPending, senderP2SH))
theirCommitTx.AddTxOut(wire.NewTxOut(amountPending, receiverP2SH))
}
return nil
}
示例3: addOutputs
// addOutputs adds the given address/amount pairs as outputs to msgtx,
// returning their total amount.
func addOutputs(msgtx *wire.MsgTx, pairs map[string]btcutil.Amount, chainParams *chaincfg.Params) (btcutil.Amount, error) {
var minAmount btcutil.Amount
for addrStr, amt := range pairs {
if amt <= 0 {
return minAmount, ErrNonPositiveAmount
}
minAmount += amt
addr, err := btcutil.DecodeAddress(addrStr, chainParams)
if err != nil {
return minAmount, fmt.Errorf("cannot decode address: %s", err)
}
// Add output to spend amt to addr.
pkScript, err := txscript.PayToAddrScript(addr)
if err != nil {
return minAmount, fmt.Errorf("cannot create txout script: %s", err)
}
txout := wire.NewTxOut(int64(amt), pkScript)
msgtx.AddTxOut(txout)
}
return minAmount, nil
}
示例4: Test_dupTx
//.........這裏部分代碼省略.........
newheight, err := db.InsertBlock(block)
if err != nil {
t.Errorf("failed to insert block %v err %v", height, err)
break out
}
if newheight != height {
t.Errorf("height mismatch expect %v returned %v", height, newheight)
break out
}
newSha, blkid, err := db.NewestSha()
if err != nil {
t.Errorf("failed to obtain latest sha %v %v", height, err)
}
if blkid != height {
t.Errorf("height doe not match latest block height %v %v %v", blkid, height, err)
}
blkSha := block.Sha()
if *newSha != *blkSha {
t.Errorf("Newest block sha does not match freshly inserted one %v %v %v ", newSha, blkSha, err)
}
lastSha = blkSha
}
// generate a new block based on the last sha
// these block are not verified, so there are a bunch of garbage fields
// in the 'generated' block.
var bh wire.BlockHeader
bh.Version = 2
bh.PrevBlock = *lastSha
// Bits, Nonce are not filled in
mblk := wire.NewMsgBlock(&bh)
hash, _ := wire.NewShaHashFromStr("df2b060fa2e5e9c8ed5eaf6a45c13753ec8c63282b2688322eba40cd98ea067a")
po := wire.NewOutPoint(hash, 0)
txI := wire.NewTxIn(po, []byte("garbage"))
txO := wire.NewTxOut(50000000, []byte("garbageout"))
var tx wire.MsgTx
tx.AddTxIn(txI)
tx.AddTxOut(txO)
mblk.AddTransaction(&tx)
blk := btcutil.NewBlock(mblk)
fetchList := []*wire.ShaHash{hash}
listReply := db.FetchUnSpentTxByShaList(fetchList)
for _, lr := range listReply {
if lr.Err != nil {
t.Errorf("sha %v spent %v err %v\n", lr.Sha,
lr.TxSpent, lr.Err)
}
}
_, err = db.InsertBlock(blk)
if err != nil {
t.Errorf("failed to insert phony block %v", err)
}
// ok, did it 'spend' the tx ?
listReply = db.FetchUnSpentTxByShaList(fetchList)
for _, lr := range listReply {
if lr.Err != database.ErrTxShaMissing {
t.Errorf("sha %v spent %v err %v\n", lr.Sha,
lr.TxSpent, lr.Err)
}
}
txlist := blk.Transactions()
for _, tx := range txlist {
txsha := tx.Sha()
txReply, err := db.FetchTxBySha(txsha)
if err != nil {
t.Errorf("fully spent lookup %v err %v\n", hash, err)
} else {
for _, lr := range txReply {
if lr.Err != nil {
t.Errorf("stx %v spent %v err %v\n", lr.Sha,
lr.TxSpent, lr.Err)
}
}
}
}
t.Logf("Dropping block")
err = db.DropAfterBlockBySha(lastSha)
if err != nil {
t.Errorf("failed to drop spending block %v", err)
}
}
示例5: fundTx
// fundTx attempts to fund a transaction sending amt bitcoin. The coins are
// selected such that the final amount spent pays enough fees as dictated by
// the passed fee rate. The passed fee rate should be expressed in
// satoshis-per-byte.
//
// NOTE: The memWallet's mutex must be held when this function is called.
func (m *memWallet) fundTx(tx *wire.MsgTx, amt btcutil.Amount, feeRate btcutil.Amount) error {
const (
// spendSize is the largest number of bytes of a sigScript
// which spends a p2pkh output: OP_DATA_73 <sig> OP_DATA_33 <pubkey>
spendSize = 1 + 73 + 1 + 33
)
var (
amtSelected btcutil.Amount
txSize int
)
for outPoint, utxo := range m.utxos {
// Skip any outputs that are still currently immature or are
// currently locked.
if !utxo.isMature(m.currentHeight) || utxo.isLocked {
continue
}
amtSelected += utxo.value
// Add the selected output to the transaction, updating the
// current tx size while accounting for the size of the future
// sigScript.
tx.AddTxIn(wire.NewTxIn(&outPoint, nil))
txSize = tx.SerializeSize() + spendSize*len(tx.TxIn)
// Calculate the fee required for the txn at this point
// observing the specified fee rate. If we don't have enough
// coins from he current amount selected to pay the fee, then
// continue to grab more coins.
reqFee := btcutil.Amount(txSize * int(feeRate))
if amtSelected-reqFee < amt {
continue
}
// If we have any change left over, then add an additional
// output to the transaction reserved for change.
changeVal := amtSelected - amt - reqFee
if changeVal > 0 {
addr, err := m.newAddress()
if err != nil {
return err
}
pkScript, err := txscript.PayToAddrScript(addr)
if err != nil {
return err
}
changeOutput := &wire.TxOut{
Value: int64(changeVal),
PkScript: pkScript,
}
tx.AddTxOut(changeOutput)
}
return nil
}
// If we've reached this point, then coin selection failed due to an
// insufficient amount of coins.
return fmt.Errorf("not enough funds for coin selection")
}