本文整理匯總了Golang中cmd/internal/gc.Linksym函數的典型用法代碼示例。如果您正苦於以下問題：Golang Linksym函數的具體用法？Golang Linksym怎麽用？Golang Linksym使用的例子？那麽, 這裏精選的函數代碼示例或許可以為您提供幫助。
在下文中一共展示了Linksym函數的7個代碼示例，這些例子默認根據受歡迎程度排序。您可以為喜歡或者感覺有用的代碼點讚，您的評價將有助於係統推薦出更棒的Golang代碼示例。
示例1: zerorange
func zerorange(p *obj.Prog, frame int64, lo int64, hi int64, ax *uint32) *obj.Prog {
cnt := hi - lo
if cnt == 0 {
return p
}
if *ax == 0 {
p = appendpp(p, x86.AMOVL, obj.TYPE_CONST, 0, 0, obj.TYPE_REG, x86.REG_AX, 0)
*ax = 1
}
if cnt <= int64(4*gc.Widthreg) {
for i := int64(0); i < cnt; i += int64(gc.Widthreg) {
p = appendpp(p, x86.AMOVL, obj.TYPE_REG, x86.REG_AX, 0, obj.TYPE_MEM, x86.REG_SP, frame+lo+i)
}
} else if !gc.Nacl && cnt <= int64(128*gc.Widthreg) {
p = appendpp(p, x86.ALEAL, obj.TYPE_MEM, x86.REG_SP, frame+lo, obj.TYPE_REG, x86.REG_DI, 0)
p = appendpp(p, obj.ADUFFZERO, obj.TYPE_NONE, 0, 0, obj.TYPE_ADDR, 0, 1*(128-cnt/int64(gc.Widthreg)))
p.To.Sym = gc.Linksym(gc.Pkglookup("duffzero", gc.Runtimepkg))
} else {
p = appendpp(p, x86.AMOVL, obj.TYPE_CONST, 0, cnt/int64(gc.Widthreg), obj.TYPE_REG, x86.REG_CX, 0)
p = appendpp(p, x86.ALEAL, obj.TYPE_MEM, x86.REG_SP, frame+lo, obj.TYPE_REG, x86.REG_DI, 0)
p = appendpp(p, x86.AREP, obj.TYPE_NONE, 0, 0, obj.TYPE_NONE, 0, 0)
p = appendpp(p, x86.ASTOSL, obj.TYPE_NONE, 0, 0, obj.TYPE_NONE, 0, 0)
}
return p
}示例2: cgen_ret
/*
* generate return.
* n->left is assignments to return values.
*/
func cgen_ret(n *gc.Node) {
if n != nil {
gc.Genlist(n.List) // copy out args
}
if gc.Hasdefer != 0 {
ginscall(gc.Deferreturn, 0)
}
gc.Genlist(gc.Curfn.Exit)
p := gins(obj.ARET, nil, nil)
if n != nil && n.Op == gc.ORETJMP {
p.To.Type = obj.TYPE_MEM
p.To.Name = obj.NAME_EXTERN
p.To.Sym = gc.Linksym(n.Left.Sym)
}
}示例3: zerorange
func zerorange(p *obj.Prog, frame int64, lo int64, hi int64, ax *uint32) *obj.Prog {
cnt := hi - lo
if cnt == 0 {
return p
}
if *ax == 0 {
p = appendpp(p, x86.AMOVQ, obj.TYPE_CONST, 0, 0, obj.TYPE_REG, x86.REG_AX, 0)
*ax = 1
}
if cnt%int64(gc.Widthreg) != 0 {
// should only happen with nacl
if cnt%int64(gc.Widthptr) != 0 {
gc.Fatal("zerorange count not a multiple of widthptr %d", cnt)
}
p = appendpp(p, x86.AMOVL, obj.TYPE_REG, x86.REG_AX, 0, obj.TYPE_MEM, x86.REG_SP, frame+lo)
lo += int64(gc.Widthptr)
cnt -= int64(gc.Widthptr)
}
if cnt <= int64(4*gc.Widthreg) {
for i := int64(0); i < cnt; i += int64(gc.Widthreg) {
p = appendpp(p, x86.AMOVQ, obj.TYPE_REG, x86.REG_AX, 0, obj.TYPE_MEM, x86.REG_SP, frame+lo+i)
}
} else if !gc.Nacl && (cnt <= int64(128*gc.Widthreg)) {
q := cnt / int64(gc.Widthreg)
p = appendpp(p, leaptr, obj.TYPE_MEM, x86.REG_SP, frame+lo+dzDI(q), obj.TYPE_REG, x86.REG_DI, 0)
p = appendpp(p, obj.ADUFFZERO, obj.TYPE_NONE, 0, 0, obj.TYPE_ADDR, 0, dzOff(q))
p.To.Sym = gc.Linksym(gc.Pkglookup("duffzero", gc.Runtimepkg))
} else {
p = appendpp(p, x86.AMOVQ, obj.TYPE_CONST, 0, cnt/int64(gc.Widthreg), obj.TYPE_REG, x86.REG_CX, 0)
p = appendpp(p, leaptr, obj.TYPE_MEM, x86.REG_SP, frame+lo, obj.TYPE_REG, x86.REG_DI, 0)
p = appendpp(p, x86.AREP, obj.TYPE_NONE, 0, 0, obj.TYPE_NONE, 0, 0)
p = appendpp(p, x86.ASTOSQ, obj.TYPE_NONE, 0, 0, obj.TYPE_NONE, 0, 0)
}
return p
}示例4: clearfat
func clearfat(nl *gc.Node) {
/* clear a fat object */
if gc.Debug['g'] != 0 {
gc.Dump("\nclearfat", nl)
}
w := uint32(nl.Type.Width)
// Avoid taking the address for simple enough types.
if gc.Componentgen(nil, nl) {
return
}
c := w % 4 // bytes
q := w / 4 // quads
if q < 4 {
// Write sequence of MOV 0, off(base) instead of using STOSL.
// The hope is that although the code will be slightly longer,
// the MOVs will have no dependencies and pipeline better
// than the unrolled STOSL loop.
// NOTE: Must use agen, not igen, so that optimizer sees address
// being taken. We are not writing on field boundaries.
var n1 gc.Node
gc.Regalloc(&n1, gc.Types[gc.Tptr], nil)
gc.Agen(nl, &n1)
n1.Op = gc.OINDREG
var z gc.Node
gc.Nodconst(&z, gc.Types[gc.TUINT64], 0)
for {
tmp14 := q
q--
if tmp14 <= 0 {
break
}
n1.Type = z.Type
gins(x86.AMOVL, &z, &n1)
n1.Xoffset += 4
}
gc.Nodconst(&z, gc.Types[gc.TUINT8], 0)
for {
tmp15 := c
c--
if tmp15 <= 0 {
break
}
n1.Type = z.Type
gins(x86.AMOVB, &z, &n1)
n1.Xoffset++
}
gc.Regfree(&n1)
return
}
var n1 gc.Node
gc.Nodreg(&n1, gc.Types[gc.Tptr], x86.REG_DI)
gc.Agen(nl, &n1)
gconreg(x86.AMOVL, 0, x86.REG_AX)
if q > 128 || (q >= 4 && gc.Nacl) {
gconreg(x86.AMOVL, int64(q), x86.REG_CX)
gins(x86.AREP, nil, nil) // repeat
gins(x86.ASTOSL, nil, nil) // STOL AL,*(DI)+
} else if q >= 4 {
p := gins(obj.ADUFFZERO, nil, nil)
p.To.Type = obj.TYPE_ADDR
p.To.Sym = gc.Linksym(gc.Pkglookup("duffzero", gc.Runtimepkg))
// 1 and 128 = magic constants: see ../../runtime/asm_386.s
p.To.Offset = 1 * (128 - int64(q))
} else {
for q > 0 {
gins(x86.ASTOSL, nil, nil) // STOL AL,*(DI)+
q--
}
}
for c > 0 {
gins(x86.ASTOSB, nil, nil) // STOB AL,*(DI)+
c--
}
}示例5: clearfat
func clearfat(nl *gc.Node) {
/* clear a fat object */
if gc.Debug['g'] != 0 {
gc.Dump("\nclearfat", nl)
}
w := nl.Type.Width
// Avoid taking the address for simple enough types.
if gc.Componentgen(nil, nl) {
return
}
c := w % 8 // bytes
q := w / 8 // quads
if q < 4 {
// Write sequence of MOV 0, off(base) instead of using STOSQ.
// The hope is that although the code will be slightly longer,
// the MOVs will have no dependencies and pipeline better
// than the unrolled STOSQ loop.
// NOTE: Must use agen, not igen, so that optimizer sees address
// being taken. We are not writing on field boundaries.
var n1 gc.Node
gc.Agenr(nl, &n1, nil)
n1.Op = gc.OINDREG
var z gc.Node
gc.Nodconst(&z, gc.Types[gc.TUINT64], 0)
for {
tmp14 := q
q--
if tmp14 <= 0 {
break
}
n1.Type = z.Type
gins(x86.AMOVQ, &z, &n1)
n1.Xoffset += 8
}
if c >= 4 {
gc.Nodconst(&z, gc.Types[gc.TUINT32], 0)
n1.Type = z.Type
gins(x86.AMOVL, &z, &n1)
n1.Xoffset += 4
c -= 4
}
gc.Nodconst(&z, gc.Types[gc.TUINT8], 0)
for {
tmp15 := c
c--
if tmp15 <= 0 {
break
}
n1.Type = z.Type
gins(x86.AMOVB, &z, &n1)
n1.Xoffset++
}
gc.Regfree(&n1)
return
}
var oldn1 gc.Node
var n1 gc.Node
savex(x86.REG_DI, &n1, &oldn1, nil, gc.Types[gc.Tptr])
gc.Agen(nl, &n1)
var ax gc.Node
var oldax gc.Node
savex(x86.REG_AX, &ax, &oldax, nil, gc.Types[gc.Tptr])
gconreg(x86.AMOVL, 0, x86.REG_AX)
if q > 128 || gc.Nacl {
gconreg(movptr, q, x86.REG_CX)
gins(x86.AREP, nil, nil) // repeat
gins(x86.ASTOSQ, nil, nil) // STOQ AL,*(DI)+
} else {
if di := dzDI(q); di != 0 {
gconreg(addptr, di, x86.REG_DI)
}
p := gins(obj.ADUFFZERO, nil, nil)
p.To.Type = obj.TYPE_ADDR
p.To.Sym = gc.Linksym(gc.Pkglookup("duffzero", gc.Runtimepkg))
p.To.Offset = dzOff(q)
}
z := ax
di := n1
if w >= 8 && c >= 4 {
di.Op = gc.OINDREG
z.Type = gc.Types[gc.TINT64]
di.Type = z.Type
p := gins(x86.AMOVQ, &z, &di)
p.To.Scale = 1
p.To.Offset = c - 8
} else if c >= 4 {
di.Op = gc.OINDREG
z.Type = gc.Types[gc.TINT32]
//.........這裏部分代碼省略.........
示例6: stackcopy
func stackcopy(n, ns *gc.Node, osrc, odst, w int64) {
var noddi gc.Node
gc.Nodreg(&noddi, gc.Types[gc.Tptr], x86.REG_DI)
var nodsi gc.Node
gc.Nodreg(&nodsi, gc.Types[gc.Tptr], x86.REG_SI)
var nodl gc.Node
var nodr gc.Node
if n.Ullman >= ns.Ullman {
gc.Agenr(n, &nodr, &nodsi)
if ns.Op == gc.ONAME {
gc.Gvardef(ns)
}
gc.Agenr(ns, &nodl, &noddi)
} else {
if ns.Op == gc.ONAME {
gc.Gvardef(ns)
}
gc.Agenr(ns, &nodl, &noddi)
gc.Agenr(n, &nodr, &nodsi)
}
if nodl.Val.U.Reg != x86.REG_DI {
gmove(&nodl, &noddi)
}
if nodr.Val.U.Reg != x86.REG_SI {
gmove(&nodr, &nodsi)
}
gc.Regfree(&nodl)
gc.Regfree(&nodr)
c := w % 8 // bytes
q := w / 8 // quads
var oldcx gc.Node
var cx gc.Node
savex(x86.REG_CX, &cx, &oldcx, nil, gc.Types[gc.TINT64])
// if we are copying forward on the stack and
// the src and dst overlap, then reverse direction
if osrc < odst && odst < osrc+w {
// reverse direction
gins(x86.ASTD, nil, nil) // set direction flag
if c > 0 {
gconreg(addptr, w-1, x86.REG_SI)
gconreg(addptr, w-1, x86.REG_DI)
gconreg(movptr, c, x86.REG_CX)
gins(x86.AREP, nil, nil) // repeat
gins(x86.AMOVSB, nil, nil) // MOVB *(SI)-,*(DI)-
}
if q > 0 {
if c > 0 {
gconreg(addptr, -7, x86.REG_SI)
gconreg(addptr, -7, x86.REG_DI)
} else {
gconreg(addptr, w-8, x86.REG_SI)
gconreg(addptr, w-8, x86.REG_DI)
}
gconreg(movptr, q, x86.REG_CX)
gins(x86.AREP, nil, nil) // repeat
gins(x86.AMOVSQ, nil, nil) // MOVQ *(SI)-,*(DI)-
}
// we leave with the flag clear
gins(x86.ACLD, nil, nil)
} else {
// normal direction
if q > 128 || (gc.Nacl && q >= 4) {
gconreg(movptr, q, x86.REG_CX)
gins(x86.AREP, nil, nil) // repeat
gins(x86.AMOVSQ, nil, nil) // MOVQ *(SI)+,*(DI)+
} else if q >= 4 {
p := gins(obj.ADUFFCOPY, nil, nil)
p.To.Type = obj.TYPE_ADDR
p.To.Sym = gc.Linksym(gc.Pkglookup("duffcopy", gc.Runtimepkg))
// 14 and 128 = magic constants: see ../../runtime/asm_amd64.s
p.To.Offset = 14 * (128 - q)
} else if !gc.Nacl && c == 0 {
// We don't need the MOVSQ side-effect of updating SI and DI,
// and issuing a sequence of MOVQs directly is faster.
nodsi.Op = gc.OINDREG
noddi.Op = gc.OINDREG
for q > 0 {
gmove(&nodsi, &cx) // MOVQ x+(SI),CX
gmove(&cx, &noddi) // MOVQ CX,x+(DI)
nodsi.Xoffset += 8
noddi.Xoffset += 8
q--
}
} else {
for q > 0 {
gins(x86.AMOVSQ, nil, nil) // MOVQ *(SI)+,*(DI)+
q--
}
}
//.........這裏部分代碼省略.........
示例7: sgen
//.........這裏部分代碼省略.........
// the src and dst overlap, then reverse direction
if osrc < odst && odst < osrc+w {
// reverse direction
gins(x86.ASTD, nil, nil) // set direction flag
if c > 0 {
gconreg(addptr, w-1, x86.REG_SI)
gconreg(addptr, w-1, x86.REG_DI)
gconreg(movptr, c, x86.REG_CX)
gins(x86.AREP, nil, nil) // repeat
gins(x86.AMOVSB, nil, nil) // MOVB *(SI)-,*(DI)-
}
if q > 0 {
if c > 0 {
gconreg(addptr, -7, x86.REG_SI)
gconreg(addptr, -7, x86.REG_DI)
} else {
gconreg(addptr, w-8, x86.REG_SI)
gconreg(addptr, w-8, x86.REG_DI)
}
gconreg(movptr, q, x86.REG_CX)
gins(x86.AREP, nil, nil) // repeat
gins(x86.AMOVSQ, nil, nil) // MOVQ *(SI)-,*(DI)-
}
// we leave with the flag clear
gins(x86.ACLD, nil, nil)
} else {
// normal direction
if q > 128 || (gc.Nacl && q >= 4) {
gconreg(movptr, q, x86.REG_CX)
gins(x86.AREP, nil, nil) // repeat
gins(x86.AMOVSQ, nil, nil) // MOVQ *(SI)+,*(DI)+
} else if q >= 4 {
p := gins(obj.ADUFFCOPY, nil, nil)
p.To.Type = obj.TYPE_ADDR
p.To.Sym = gc.Linksym(gc.Pkglookup("duffcopy", gc.Runtimepkg))
// 14 and 128 = magic constants: see ../../runtime/asm_amd64.s
p.To.Offset = 14 * (128 - q)
} else if !gc.Nacl && c == 0 {
// We don't need the MOVSQ side-effect of updating SI and DI,
// and issuing a sequence of MOVQs directly is faster.
nodsi.Op = gc.OINDREG
noddi.Op = gc.OINDREG
for q > 0 {
gmove(&nodsi, &cx) // MOVQ x+(SI),CX
gmove(&cx, &noddi) // MOVQ CX,x+(DI)
nodsi.Xoffset += 8
noddi.Xoffset += 8
q--
}
} else {
for q > 0 {
gins(x86.AMOVSQ, nil, nil) // MOVQ *(SI)+,*(DI)+
q--
}
}
// copy the remaining c bytes
if w < 4 || c <= 1 || (odst < osrc && osrc < odst+w) {
for c > 0 {
gins(x86.AMOVSB, nil, nil) // MOVB *(SI)+,*(DI)+
c--
}
} else if w < 8 || c <= 4 {
nodsi.Op = gc.OINDREG
noddi.Op = gc.OINDREG
cx.Type = gc.Types[gc.TINT32]
nodsi.Type = gc.Types[gc.TINT32]
noddi.Type = gc.Types[gc.TINT32]
if c > 4 {
nodsi.Xoffset = 0
noddi.Xoffset = 0
gmove(&nodsi, &cx)
gmove(&cx, &noddi)
}
nodsi.Xoffset = c - 4
noddi.Xoffset = c - 4
gmove(&nodsi, &cx)
gmove(&cx, &noddi)
} else {
nodsi.Op = gc.OINDREG
noddi.Op = gc.OINDREG
cx.Type = gc.Types[gc.TINT64]
nodsi.Type = gc.Types[gc.TINT64]
noddi.Type = gc.Types[gc.TINT64]
nodsi.Xoffset = c - 8
noddi.Xoffset = c - 8
gmove(&nodsi, &cx)
gmove(&cx, &noddi)
}
}
restx(&cx, &oldcx)
}