本文整理匯總了Golang中cmd/internal/gc.Clearp函數的典型用法代碼示例。如果您正苦於以下問題：Golang Clearp函數的具體用法？Golang Clearp怎麽用？Golang Clearp使用的例子？那麽, 這裏精選的函數代碼示例或許可以為您提供幫助。
在下文中一共展示了Clearp函數的4個代碼示例，這些例子默認根據受歡迎程度排序。您可以為喜歡或者感覺有用的代碼點讚，您的評價將有助於係統推薦出更棒的Golang代碼示例。
示例1: expandchecks
// Called after regopt and peep have run.
// Expand CHECKNIL pseudo-op into actual nil pointer check.
func expandchecks(firstp *obj.Prog) {
var p1 *obj.Prog
var p2 *obj.Prog
for p := firstp; p != nil; p = p.Link {
if p.As != obj.ACHECKNIL {
continue
}
if gc.Debug_checknil != 0 && p.Lineno > 1 { // p->lineno==1 in generated wrappers
gc.Warnl(int(p.Lineno), "generated nil check")
}
// check is
// CMP arg, $0
// JNE 2(PC) (likely)
// MOV AX, 0
p1 = gc.Ctxt.NewProg()
p2 = gc.Ctxt.NewProg()
gc.Clearp(p1)
gc.Clearp(p2)
p1.Link = p2
p2.Link = p.Link
p.Link = p1
p1.Lineno = p.Lineno
p2.Lineno = p.Lineno
p1.Pc = 9999
p2.Pc = 9999
p.As = int16(cmpptr)
p.To.Type = obj.TYPE_CONST
p.To.Offset = 0
p1.As = x86.AJNE
p1.From.Type = obj.TYPE_CONST
p1.From.Offset = 1 // likely
p1.To.Type = obj.TYPE_BRANCH
p1.To.Val = p2.Link
// crash by write to memory address 0.
// if possible, since we know arg is 0, use 0(arg),
// which will be shorter to encode than plain 0.
p2.As = x86.AMOVL
p2.From.Type = obj.TYPE_REG
p2.From.Reg = x86.REG_AX
if regtyp(&p.From) {
p2.To.Type = obj.TYPE_MEM
p2.To.Reg = p.From.Reg
} else {
p2.To.Type = obj.TYPE_MEM
p2.To.Reg = x86.REG_NONE
}
p2.To.Offset = 0
}
}示例2: expandchecks
// Called after regopt and peep have run.
// Expand CHECKNIL pseudo-op into actual nil pointer check.
func expandchecks(firstp *obj.Prog) {
var p1 *obj.Prog
var p2 *obj.Prog
for p := (*obj.Prog)(firstp); p != nil; p = p.Link {
if gc.Debug_checknil != 0 && gc.Ctxt.Debugvlog != 0 {
fmt.Printf("expandchecks: %v\n", p)
}
if p.As != obj.ACHECKNIL {
continue
}
if gc.Debug_checknil != 0 && p.Lineno > 1 { // p->lineno==1 in generated wrappers
gc.Warnl(int(p.Lineno), "generated nil check")
}
if p.From.Type != obj.TYPE_REG {
gc.Fatal("invalid nil check %v\n", p)
}
// check is
// CMP arg, ZR
// BNE 2(PC) [likely]
// MOVD ZR, 0(arg)
p1 = gc.Ctxt.NewProg()
p2 = gc.Ctxt.NewProg()
gc.Clearp(p1)
gc.Clearp(p2)
p1.Link = p2
p2.Link = p.Link
p.Link = p1
p1.Lineno = p.Lineno
p2.Lineno = p.Lineno
p1.Pc = 9999
p2.Pc = 9999
p.As = arm64.ACMP
p.Reg = arm64.REGZERO
p1.As = arm64.ABNE
//p1->from.type = TYPE_CONST;
//p1->from.offset = 1; // likely
p1.To.Type = obj.TYPE_BRANCH
p1.To.Val = p2.Link
// crash by write to memory address 0.
p2.As = arm64.AMOVD
p2.From.Type = obj.TYPE_REG
p2.From.Reg = arm64.REGZERO
p2.To.Type = obj.TYPE_MEM
p2.To.Reg = p.From.Reg
p2.To.Offset = 0
}
}示例3: appendpp
func appendpp(p *obj.Prog, as int, ftype int, freg int, foffset int64, ttype int, treg int, toffset int64) *obj.Prog {
q := gc.Ctxt.NewProg()
gc.Clearp(q)
q.As = int16(as)
q.Lineno = p.Lineno
q.From.Type = int16(ftype)
q.From.Reg = int16(freg)
q.From.Offset = foffset
q.To.Type = int16(ttype)
q.To.Reg = int16(treg)
q.To.Offset = toffset
q.Link = p.Link
p.Link = q
return q
}示例4: expandchecks
// Called after regopt and peep have run.
// Expand CHECKNIL pseudo-op into actual nil pointer check.
func expandchecks(firstp *obj.Prog) {
var reg int
var p1 *obj.Prog
for p := firstp; p != nil; p = p.Link {
if p.As != obj.ACHECKNIL {
continue
}
if gc.Debug_checknil != 0 && p.Lineno > 1 { // p->lineno==1 in generated wrappers
gc.Warnl(int(p.Lineno), "generated nil check")
}
if p.From.Type != obj.TYPE_REG {
gc.Fatal("invalid nil check %v", p)
}
reg = int(p.From.Reg)
// check is
// CMP arg, $0
// MOV.EQ arg, 0(arg)
p1 = gc.Ctxt.NewProg()
gc.Clearp(p1)
p1.Link = p.Link
p.Link = p1
p1.Lineno = p.Lineno
p1.Pc = 9999
p1.As = arm.AMOVW
p1.From.Type = obj.TYPE_REG
p1.From.Reg = int16(reg)
p1.To.Type = obj.TYPE_MEM
p1.To.Reg = int16(reg)
p1.To.Offset = 0
p1.Scond = arm.C_SCOND_EQ
p.As = arm.ACMP
p.From.Type = obj.TYPE_CONST
p.From.Reg = 0
p.From.Offset = 0
p.Reg = int16(reg)
}
}